Accreditation is a process that demonstrates a university or institution's ability to provide quality education and skills needed for a profession. There is a hierarchy of accreditation with the US Department of Education and Council for Higher Education Accreditation setting standards, regional and national accrediting agencies accrediting institutions, and programmatic accreditors reviewing specific programs. Accreditation ensures transparency about a school's programs and degrees, quality through marketing and admissions practices, and assurance of student success through graduation rates and job placements.
This document provides information about Marist College's Paralegal Program. The program offers both weekend and evening formats. The weekend program can be completed in 12 months and is offered at the Fishkill Center, with classes meeting on alternating weekends. The evening program is offered in Poughkeepsie with classes meeting weekdays from 6:30-9:00pm. Both programs require 36 transferable credits and proof of immunizations. Tuition is $475 per credit for the weekend program and $550 per credit for the evening program. The program benefits include a quality education, practical legal training, ABA approval, and career assistance.
Nursing School Requirements Article SampleTammy Jones
Nursing school requirements vary by state and university but generally include:
- Obtaining a high school diploma or GED
- Submitting a completed application by the deadline including transcripts
- Meeting GPA requirements and applying for financial aid like FAFSA if needed
- Taking entrance exams such as the SAT, PAX-RN, TEAS, NET, or HESI by the required deadlines which test math, science, reading, and English abilities
- Researching the specific requirements for your target nursing program and state to ensure all are met.
The Grand River Post Secondary Education Office (GRPSEO) provides funding assistance to Six Nations members pursuing post-secondary education. It assists students with the application process, monitors academic progress, and provides funding for tuition, books, and living expenses. Eligible programs include college diplomas or university degrees that are at least two years. Funding levels are determined based on the type of program. The GRPSEO application deadlines are February 1st for summer semesters and May 1st for fall/winter semesters. Students must maintain satisfactory academic performance for continued funding support.
The document discusses South Texas College policies regarding dual credit student attendance, conduct, course limits, deadlines, and schedule changes. It states that regular attendance is expected, students are responsible for communicating absences to instructors, and may be dropped for poor attendance. It also outlines dual credit course limits based on grade level, registration and withdrawal deadlines students must follow, and the process for making schedule changes through the Dual2Degree department.
The Grand River Post Secondary Education Office (GRSPEO) provides educational assistance to First Nations students from Six Nations. The summary provides information on eligibility requirements, levels and types of funding available, application deadlines and processes, and expectations for student success and accountability.
If you’re graduating this May, or looking to advance in your career, you may have graduate school in mind. A graduate degree can provide a valuable boost to your resume and give you a leg up as you search for jobs. But it’s important to take cost into mind before you decide to head back to school - make sure to find a program that’s compatible with your career goals and affordable. We know the price tag for graduate programs can be significant, so we’ve pulled together a summary of different options to help you pay for school. From fellowships to tax credits to federal grants, you’ll find something that can help reduce your out-of-pocket costs in our slideshow below.
The document provides information about the Grand River Post Secondary Education Office (GRPSEO), which assists Six Nations members in pursuing higher education. It outlines the application process and eligibility requirements for funding, levels of funding available for tuition, books, living expenses, and priorities for funding approval. Deadlines for applications and continuing obligations are also summarized.
Accreditation is a process that demonstrates a university or institution's ability to provide quality education and skills needed for a profession. There is a hierarchy of accreditation with the US Department of Education and Council for Higher Education Accreditation setting standards, regional and national accrediting agencies accrediting institutions, and programmatic accreditors reviewing specific programs. Accreditation ensures transparency about a school's programs and degrees, quality through marketing and admissions practices, and assurance of student success through graduation rates and job placements.
This document provides information about Marist College's Paralegal Program. The program offers both weekend and evening formats. The weekend program can be completed in 12 months and is offered at the Fishkill Center, with classes meeting on alternating weekends. The evening program is offered in Poughkeepsie with classes meeting weekdays from 6:30-9:00pm. Both programs require 36 transferable credits and proof of immunizations. Tuition is $475 per credit for the weekend program and $550 per credit for the evening program. The program benefits include a quality education, practical legal training, ABA approval, and career assistance.
Nursing School Requirements Article SampleTammy Jones
Nursing school requirements vary by state and university but generally include:
- Obtaining a high school diploma or GED
- Submitting a completed application by the deadline including transcripts
- Meeting GPA requirements and applying for financial aid like FAFSA if needed
- Taking entrance exams such as the SAT, PAX-RN, TEAS, NET, or HESI by the required deadlines which test math, science, reading, and English abilities
- Researching the specific requirements for your target nursing program and state to ensure all are met.
The Grand River Post Secondary Education Office (GRPSEO) provides funding assistance to Six Nations members pursuing post-secondary education. It assists students with the application process, monitors academic progress, and provides funding for tuition, books, and living expenses. Eligible programs include college diplomas or university degrees that are at least two years. Funding levels are determined based on the type of program. The GRPSEO application deadlines are February 1st for summer semesters and May 1st for fall/winter semesters. Students must maintain satisfactory academic performance for continued funding support.
The document discusses South Texas College policies regarding dual credit student attendance, conduct, course limits, deadlines, and schedule changes. It states that regular attendance is expected, students are responsible for communicating absences to instructors, and may be dropped for poor attendance. It also outlines dual credit course limits based on grade level, registration and withdrawal deadlines students must follow, and the process for making schedule changes through the Dual2Degree department.
The Grand River Post Secondary Education Office (GRSPEO) provides educational assistance to First Nations students from Six Nations. The summary provides information on eligibility requirements, levels and types of funding available, application deadlines and processes, and expectations for student success and accountability.
If you’re graduating this May, or looking to advance in your career, you may have graduate school in mind. A graduate degree can provide a valuable boost to your resume and give you a leg up as you search for jobs. But it’s important to take cost into mind before you decide to head back to school - make sure to find a program that’s compatible with your career goals and affordable. We know the price tag for graduate programs can be significant, so we’ve pulled together a summary of different options to help you pay for school. From fellowships to tax credits to federal grants, you’ll find something that can help reduce your out-of-pocket costs in our slideshow below.
The document provides information about the Grand River Post Secondary Education Office (GRPSEO), which assists Six Nations members in pursuing higher education. It outlines the application process and eligibility requirements for funding, levels of funding available for tuition, books, living expenses, and priorities for funding approval. Deadlines for applications and continuing obligations are also summarized.
This document provides training information for enrollment coordinators at CSU-Global, including admissions requirements. It outlines that CSU-Global is a 100% online public university that offers bachelor's and graduate degree programs as well as certificates. Admissions can be standard, non-degree seeking, or for certificate programs. Undergraduate requirements include a 2.3 GPA and 13 credits from a regionally accredited school. Graduate requirements are a 3.0 GPA and a bachelor's degree. International transcripts must be evaluated. Regional accreditation is preferred over national accreditation.
This document provides information about South Texas College's dual credit program. It welcomes new dual credit students and outlines an overview for the First-time Dual Credit Module, which reviews responsibilities and resources to ensure dual credit success. It provides details about South Texas College, including that it has over 31,000 students, more than 15,000 of which are dual credit students, and it serves 6 campuses and 2 higher education centers in Hidalgo and Starr Counties.
Module 6 Connecting Student to MDC Resourcesvzayas
This document outlines various resources available to students at MDC, including financial aid and scholarships, disability services, tutoring and study groups, career exploration tools, financial counseling and legal assistance through Single Stop, and opportunities for service learning and internships. To maintain financial aid eligibility, students must meet requirements such as maintaining a 2.0 GPA, being degree-seeking, enrolled in required courses, and taking a minimum number of credits per term. Financial aid will cover the cost of retaking a failed course once. The 150% rule limits financial aid to cover up to 150% of the credits required for a student's program of study.
SUNY Broome offers support services for veterans through their Veterans and Military Affairs office. The office handles over 110 veterans, providing referrals for counseling, academic support, and work-study job information. Veterans can receive benefits like the Post-9/11 GI Bill, which guarantees up to 36 months of education benefits and a monthly housing allowance. To apply, veterans determine their eligible benefit and apply through the VA website, submitting military transcripts and records to SUNY Broome for evaluation of transfer credits.
College grants are provided to students who demonstrate financial need, displaced workers who need to get retrained in order to compete and re-join the workforce, and students enrolled in a post baccalaureate teaching certificate program. This particular type of grant does not need to be repaid by the student and there are no application fees. Also, you don’t need to have a good credit to apply. For more information, please visit www.allamericangrantguide.com
The document discusses Texas 4-H academic eligibility policies and guidelines. It states that all 4-H competitive events require participants to meet academic eligibility standards as outlined in the Texas Education Code. County agents should consult with school officials at the start of each year to discuss obtaining excused absences, determining student eligibility, and when to check on eligibility for events. The document also provides information on designating 4-H as an extracurricular activity and appointing agents as adjunct faculty to enable student attendance counting.
The document defines key terms related to the college experience including: college, a self-governing body within a university that provides living quarters; bachelors, the lowest degree conferred by a 4-year institution; room and board, lodging and food provided for a set price; SAT and ACT, standardized tests used for college admission; tuition, the price of instruction; admissions, the process of being admitted; enrollment, becoming a member; university, an institution of higher education that grants degrees; vocational, relating to career training; and associates, a 2-year degree.
The document describes DISCOVER, an online application system developed by M. D. Anderson's Department of Trainee & Alumni Affairs to streamline the educational trainee application, selection, and appointment process. DISCOVER allows applicants to submit application forms and documents online, request letters of recommendation electronically, and allows administrators, faculty, and staff to manage the application process. The system is accessible via the internet for applicants and the intranet for internal users. Technical support is available 24/7 and questions regarding policies should be directed to academic coordinators in the Department of Trainee & Alumni Affairs.
The Virginia Education Wizard is an online resource developed by Virginia's Community Colleges that provides information to help users explore careers, curriculum choices, and financial assistance options. The Wizard can be used by prospective students to identify career paths and funding sources, current students to plan degree progress and transfers, and experienced workers looking to explore new careers or education. Key features include an interest and values assessment, browsing careers by name or cluster, program and course information, a financial aid award estimator, and transfer planning tools.
The Virginia Education Wizard is an online resource developed by Virginia's Community Colleges that provides information to help users explore careers, curriculum choices, and financial assistance options. The Wizard allows prospective students to identify career paths and curriculum choices, current students to track degree progress and transfer plans, and experienced workers to explore new careers or education requirements. Key features include an interest and values assessment, browsing careers by name or cluster, program and course information, a financial aid award estimator, and transfer planning tools.
The Ontario Student Assistance Program (OSAP) provides needs-based loans and grants to help Ontario students finance their post-secondary education, with eligibility determined by factors like residency, enrollment status, and financial need calculated from expenses, income, assets, and expected parental contribution. OSAP assistance includes integrated loans, grants, bursaries, and work programs while in school as well as repayment options after completing studies. The document provides information on how to apply for OSAP, the application process, responsibilities, and additional resources for financing one's education.
To be accepted to a university in Switzerland, candidates must possess either a state-recognized Swiss maturity certificate or another foreign certificate recognized as equivalent by the university. Depending on the course, a good knowledge of the language of instruction is a prerequisite as well. Most of the schools require a B1/B2 certification level, according to the European language passport (Europass), although some Bachelor's and Master’s programs are taught in English.
This document provides an introduction to common study abroad terminology used at Texas A&M University. It defines key words and acronyms related to study abroad programs, the application process, financing study abroad, and resources for studying abroad. Terms defined include study abroad advisor, contact hours, faculty-led programs, transfer credit programs, FAFSA, scholarships, and expectations for study abroad assignments. The document aims to clarify study abroad "lingo" for Texas A&M students.
The document summarizes information about studying abroad through North Carolina State University. It discusses the study abroad office's mission, the number of students who received scholarships in 2009-2010, and provides an overview of the different types of study abroad programs available including exchanges, direct enrollments, group programs, and summer programs. It also offers tips for students to consider when choosing a program and location as well as the step-by-step process for applying.
Cuyahoga Community College received funding from Ohio Reach to enhance support services for former foster youth enrolled at the college. The goal is to improve retention and completion rates for this student group. The college has established an initiative team, identified current foster scholar students, and created a website with resources. Next steps include developing a mentoring program, cultivating community partnerships, and recruiting more foster scholars to the college through marketing.
South Texas College Dual Credit Campus Resourceskgarz175
The document provides information about various campus resources available to South Texas College dual credit students, including counseling services, transfer assistance, tutoring centers, libraries, career coaching, honors programs, and student life activities. Counseling services are available for academic, career, mental health, and other counseling needs. The transfer center assists with articulation agreements and identifying transferable courses. Tutoring centers provide academic support. Libraries offer study spaces, online resources, and printing. Career coaching includes assessments and information about career options. An honors program is available for high-achieving students. Students are also invited to participate in campus clubs and activities.
The ApplyTexas application for Texas public universities covers testing scores, recommendations, extracurricular activities, essays, and transcripts. For testing, it looks at highest ACT or SAT scores. Recommendations should be from teachers who can address the applicant's strengths. Extracurriculars include both in-school and out-of-school activities. Essays allow applicants to share what makes them unique and any special circumstances. Transcripts are reviewed for challenging coursework and continuity in subjects.
The document discusses financial aid options for students attending Colegio San Patricio in Mexico. It provides information on tuition costs and lists several types of scholarships available, including university scholarships based on merit or service, athletic scholarships, and educational credits granted by the university or its partners to help students fund their tuition.
This document provides an overview of Canada's post-secondary education system. It discusses that Canada has 163 universities and 183 colleges that are provincially funded and regulated. The structure of colleges varies across provinces, with some being single institutions with multiple campuses while others have multiple standalone colleges. Colleges offer certificates and diplomas, with some also offering applied degrees, while universities offer bachelor's, master's and PhD programs. The document also outlines some of the governance structures and issues facing Canada's post-secondary system, such as declining enrollment, skills shortages, aging faculty, and integrating technology.
Berea College is a private liberal arts college located in Kentucky that offers academically promising students from low-income backgrounds a high-quality education with no tuition. It was founded in 1855 as the first interracially coeducational college in the South. Students graduate with little to no debt through a unique work program where they work 10-15 hours per week while enrolled full-time. Berea College is ranked as one of the top liberal arts colleges in the country and is distinguished by offering every student a Tuition Promise Scholarship worth nearly $100,000 over four years.
This document discusses the annual financial reporting requirements for Minority Serving Institutions (MSIs) that receive federal funding. It explains that federal agencies must collect financial data from MSIs and submit reports to the Department of Education on their efforts to strengthen MSIs. The Department of Education then analyzes these reports and shares the data with the White House to inform recommendations for supporting MSIs. Advisory councils make recommendations to the President and Education Secretary on how to increase MSI participation in federal programs.
This document provides training information for enrollment coordinators at CSU-Global, including admissions requirements. It outlines that CSU-Global is a 100% online public university that offers bachelor's and graduate degree programs as well as certificates. Admissions can be standard, non-degree seeking, or for certificate programs. Undergraduate requirements include a 2.3 GPA and 13 credits from a regionally accredited school. Graduate requirements are a 3.0 GPA and a bachelor's degree. International transcripts must be evaluated. Regional accreditation is preferred over national accreditation.
This document provides information about South Texas College's dual credit program. It welcomes new dual credit students and outlines an overview for the First-time Dual Credit Module, which reviews responsibilities and resources to ensure dual credit success. It provides details about South Texas College, including that it has over 31,000 students, more than 15,000 of which are dual credit students, and it serves 6 campuses and 2 higher education centers in Hidalgo and Starr Counties.
Module 6 Connecting Student to MDC Resourcesvzayas
This document outlines various resources available to students at MDC, including financial aid and scholarships, disability services, tutoring and study groups, career exploration tools, financial counseling and legal assistance through Single Stop, and opportunities for service learning and internships. To maintain financial aid eligibility, students must meet requirements such as maintaining a 2.0 GPA, being degree-seeking, enrolled in required courses, and taking a minimum number of credits per term. Financial aid will cover the cost of retaking a failed course once. The 150% rule limits financial aid to cover up to 150% of the credits required for a student's program of study.
SUNY Broome offers support services for veterans through their Veterans and Military Affairs office. The office handles over 110 veterans, providing referrals for counseling, academic support, and work-study job information. Veterans can receive benefits like the Post-9/11 GI Bill, which guarantees up to 36 months of education benefits and a monthly housing allowance. To apply, veterans determine their eligible benefit and apply through the VA website, submitting military transcripts and records to SUNY Broome for evaluation of transfer credits.
College grants are provided to students who demonstrate financial need, displaced workers who need to get retrained in order to compete and re-join the workforce, and students enrolled in a post baccalaureate teaching certificate program. This particular type of grant does not need to be repaid by the student and there are no application fees. Also, you don’t need to have a good credit to apply. For more information, please visit www.allamericangrantguide.com
The document discusses Texas 4-H academic eligibility policies and guidelines. It states that all 4-H competitive events require participants to meet academic eligibility standards as outlined in the Texas Education Code. County agents should consult with school officials at the start of each year to discuss obtaining excused absences, determining student eligibility, and when to check on eligibility for events. The document also provides information on designating 4-H as an extracurricular activity and appointing agents as adjunct faculty to enable student attendance counting.
The document defines key terms related to the college experience including: college, a self-governing body within a university that provides living quarters; bachelors, the lowest degree conferred by a 4-year institution; room and board, lodging and food provided for a set price; SAT and ACT, standardized tests used for college admission; tuition, the price of instruction; admissions, the process of being admitted; enrollment, becoming a member; university, an institution of higher education that grants degrees; vocational, relating to career training; and associates, a 2-year degree.
The document describes DISCOVER, an online application system developed by M. D. Anderson's Department of Trainee & Alumni Affairs to streamline the educational trainee application, selection, and appointment process. DISCOVER allows applicants to submit application forms and documents online, request letters of recommendation electronically, and allows administrators, faculty, and staff to manage the application process. The system is accessible via the internet for applicants and the intranet for internal users. Technical support is available 24/7 and questions regarding policies should be directed to academic coordinators in the Department of Trainee & Alumni Affairs.
The Virginia Education Wizard is an online resource developed by Virginia's Community Colleges that provides information to help users explore careers, curriculum choices, and financial assistance options. The Wizard can be used by prospective students to identify career paths and funding sources, current students to plan degree progress and transfers, and experienced workers looking to explore new careers or education. Key features include an interest and values assessment, browsing careers by name or cluster, program and course information, a financial aid award estimator, and transfer planning tools.
The Virginia Education Wizard is an online resource developed by Virginia's Community Colleges that provides information to help users explore careers, curriculum choices, and financial assistance options. The Wizard allows prospective students to identify career paths and curriculum choices, current students to track degree progress and transfer plans, and experienced workers to explore new careers or education requirements. Key features include an interest and values assessment, browsing careers by name or cluster, program and course information, a financial aid award estimator, and transfer planning tools.
The Ontario Student Assistance Program (OSAP) provides needs-based loans and grants to help Ontario students finance their post-secondary education, with eligibility determined by factors like residency, enrollment status, and financial need calculated from expenses, income, assets, and expected parental contribution. OSAP assistance includes integrated loans, grants, bursaries, and work programs while in school as well as repayment options after completing studies. The document provides information on how to apply for OSAP, the application process, responsibilities, and additional resources for financing one's education.
To be accepted to a university in Switzerland, candidates must possess either a state-recognized Swiss maturity certificate or another foreign certificate recognized as equivalent by the university. Depending on the course, a good knowledge of the language of instruction is a prerequisite as well. Most of the schools require a B1/B2 certification level, according to the European language passport (Europass), although some Bachelor's and Master’s programs are taught in English.
This document provides an introduction to common study abroad terminology used at Texas A&M University. It defines key words and acronyms related to study abroad programs, the application process, financing study abroad, and resources for studying abroad. Terms defined include study abroad advisor, contact hours, faculty-led programs, transfer credit programs, FAFSA, scholarships, and expectations for study abroad assignments. The document aims to clarify study abroad "lingo" for Texas A&M students.
The document summarizes information about studying abroad through North Carolina State University. It discusses the study abroad office's mission, the number of students who received scholarships in 2009-2010, and provides an overview of the different types of study abroad programs available including exchanges, direct enrollments, group programs, and summer programs. It also offers tips for students to consider when choosing a program and location as well as the step-by-step process for applying.
Cuyahoga Community College received funding from Ohio Reach to enhance support services for former foster youth enrolled at the college. The goal is to improve retention and completion rates for this student group. The college has established an initiative team, identified current foster scholar students, and created a website with resources. Next steps include developing a mentoring program, cultivating community partnerships, and recruiting more foster scholars to the college through marketing.
South Texas College Dual Credit Campus Resourceskgarz175
The document provides information about various campus resources available to South Texas College dual credit students, including counseling services, transfer assistance, tutoring centers, libraries, career coaching, honors programs, and student life activities. Counseling services are available for academic, career, mental health, and other counseling needs. The transfer center assists with articulation agreements and identifying transferable courses. Tutoring centers provide academic support. Libraries offer study spaces, online resources, and printing. Career coaching includes assessments and information about career options. An honors program is available for high-achieving students. Students are also invited to participate in campus clubs and activities.
The ApplyTexas application for Texas public universities covers testing scores, recommendations, extracurricular activities, essays, and transcripts. For testing, it looks at highest ACT or SAT scores. Recommendations should be from teachers who can address the applicant's strengths. Extracurriculars include both in-school and out-of-school activities. Essays allow applicants to share what makes them unique and any special circumstances. Transcripts are reviewed for challenging coursework and continuity in subjects.
The document discusses financial aid options for students attending Colegio San Patricio in Mexico. It provides information on tuition costs and lists several types of scholarships available, including university scholarships based on merit or service, athletic scholarships, and educational credits granted by the university or its partners to help students fund their tuition.
This document provides an overview of Canada's post-secondary education system. It discusses that Canada has 163 universities and 183 colleges that are provincially funded and regulated. The structure of colleges varies across provinces, with some being single institutions with multiple campuses while others have multiple standalone colleges. Colleges offer certificates and diplomas, with some also offering applied degrees, while universities offer bachelor's, master's and PhD programs. The document also outlines some of the governance structures and issues facing Canada's post-secondary system, such as declining enrollment, skills shortages, aging faculty, and integrating technology.
Berea College is a private liberal arts college located in Kentucky that offers academically promising students from low-income backgrounds a high-quality education with no tuition. It was founded in 1855 as the first interracially coeducational college in the South. Students graduate with little to no debt through a unique work program where they work 10-15 hours per week while enrolled full-time. Berea College is ranked as one of the top liberal arts colleges in the country and is distinguished by offering every student a Tuition Promise Scholarship worth nearly $100,000 over four years.
This document discusses the annual financial reporting requirements for Minority Serving Institutions (MSIs) that receive federal funding. It explains that federal agencies must collect financial data from MSIs and submit reports to the Department of Education on their efforts to strengthen MSIs. The Department of Education then analyzes these reports and shares the data with the White House to inform recommendations for supporting MSIs. Advisory councils make recommendations to the President and Education Secretary on how to increase MSI participation in federal programs.
Berea College is a private liberal arts college in Kentucky that offers academically promising students from low-income backgrounds a tuition-free education. It was founded in 1855 as the first interracially coeducational college in the South. Today, Berea maintains high rankings and distinctions such as being one of only seven federally recognized Work Colleges in the U.S. The majority of Berea's 1,600 students are from Appalachia and have a family income under $30,000. Through scholarships and a work program, students can graduate with little to no debt.
Connect NC Presentation for Chapel Hill Downtown PartnershipKristen Smith
#VoteYesToInvest!
More info:
voteyestoinvest.com
connectnc.gov
Portions of the presentation were provided by the Connect NC campaign committee and UNC.
The document provides a history of financial aid in the United States, beginning with the Higher Education Act of 1965 which established the first federal financial aid programs. It discusses key Supreme Court cases related to financial aid and affirmative action. It also discusses Salem State University's mission and vision around providing accessible education, as well as statistics on financial aid received by SSU students. Best practices for financial aid administration from CAS and the College Board emphasize compliance with laws, equitable treatment of students, and commitment to need-based aid.
This document provides information on various scholarship opportunities available for Texas students. It describes scholarships such as the Aileen Lee Scholarship for incoming freshmen at the University of Oregon, the Tall Clubs International Student Scholarships for tall students under 21, and the Texas Educational Opportunity Grant Program for financially needy students attending Texas public two-year colleges. The document lists eligibility requirements and application deadlines for these and other scholarships students in Texas can apply for.
Historically Black Colleges and Universities (HBCUs) were established before 1964 to serve the Black community. There are currently 105 HBCUs. The document discusses seven leading HBCUs in the Southeast including Morehouse College, Florida A&M University, Howard University, North Carolina A&T State University, Hampton University, Fisk University, and Morgan State University. It provides information on their locations, establishment dates, admission requirements, costs, financial aid options, and components of student life.
EducationUSA Weekly Update, #323, April 1, 2013EducationUSA
This document provides information on various scholarships, grants, and campus news items. It includes details on merit-based scholarships from Southern Oregon University, The University of Texas at Austin, Concordia University, Pacific University, and Chatham University. It also lists information on graduate assistantships at Cornell University and scholarships/fellowships at the University of Georgia. Additionally, it advertises Middle Eastern Affairs study grants from International House and various virtual student fairs and information sessions.
Universal Pre-K Initiative Forum PresentationEducationNC
This document discusses strategies for advocating for universal pre-K in Forsyth County, North Carolina. It outlines messaging tailored for specific audiences to promote the benefits of pre-K, including improved educational and life outcomes for children, economic and social benefits for the community, and support for working families. It also addresses maintaining high quality standards, estimating enrollment needs, current funding sources, and a path forward to achieve universal pre-K by 2020 through a community-wide planning process.
Preparing for college with middle schoolersLisa Allard
This document provides information for middle school families on planning and preparing for college. It discusses the importance of education after high school, different college options and costs. Key points include: those with a bachelor's degree earn more and have lower unemployment; college options include 4-year, 2-year, vocational programs; the median earnings and tax payments are higher for those with more education. It provides strategies for academic preparation in middle school, exploring extracurriculars and colleges. Families can use tools like net price calculators, FAFSA, college search sites to understand affordability. The document reviews financial aid, grants, loans and savings vs borrowing. It highlights Massachusetts savings options like U.Fund 529 and U.Plan
The document provides guidance on studying overseas and choosing a university. It discusses factors to consider when selecting a university, such as curriculum, faculty, costs, campus life and career support. When choosing a degree in the US, it recommends selecting a major and universities with strong programs in that field. The document also outlines the application process for US universities, including choosing schools, managing deadlines, writing essays, obtaining letters of recommendation, and showing proof of funding.
Whether you're Catholic, Baptist, Lutheran, Methodist, Presbyterian, or simply a person of faith, there's a scholarship out there that can help make your higher education goals a reality. Explore a wide range of available Christian scholarships with this in-depth guide.
This document provides information about graduate programs in the US. It discusses EducationUSA, an advising network supported by the US State Department. It outlines the types of master's and doctoral degrees, the application process, required materials and exams, financial aid options from universities and other sources, and tips for researching programs. Key steps in the application timeline are presented, from 12-18 months before through acceptance and travel arrangements.
This document provides information about Historically Black Colleges and Universities (HBCUs), including that there are currently 105 HBCUs in the United States established before 1964 primarily to serve the black community. It then discusses the leading HBCUs in the Southeast, listing 7 schools and providing each school's location, year established, and admissions requirements. Finally, it addresses various aspects of student life at colleges, such as activities, organizations, and lifestyle.
The Future Is Now: Are You A Data Professional Or A Data VisionaryBrendan Aldrich
This document discusses higher education in California. It provides an overview of the three main public higher education systems in California: the University of California system, the California State University system, and the California Community College system. It details the roles and functions of each system, as well as enrollment and degree information. It also briefly discusses the private higher education associations and institutions in California.
Grants For Churches Can Be Used For Community Services, Repairs, And Religiou...Americas Got Grants
Grants for churches serve as a crucial avenue for supporting community service initiatives, maintaining infrastructure, and facilitating religious teachings. While there may not be grants specifically designated for churches, both federal and state governments offer faith-based grants that can be accessed by religious institutions.
ACSI accredited schools place a strong emphasis on spiritual development compared to public schools. 69% of ACSI school administrators said their top priority was developing a Christian worldview, involvement in evangelism, or a close relationship with God, while 80% of public school principals said their top priority was basic literacy. ACSI schools also outperform in cultural and academic areas. They offer more mission opportunities, and Christian school graduates donate and volunteer more. ACSI schools require a more rigorous course load and offer more AP courses than other religious schools. They also have higher college attendance and test scores than national averages.
MAP 504 INTERNATIONALIZATION OF EDUCATION
TOPIC : HIGHER EDUCATION CONTEXT IN UNITED STATES OF AMERICA
PROFESSOR : DR. DANILO HILARIO
PhD STUDENT : ANNE O. SANTOS, MBA
SCHOOL TERM :3RD SEMESTER, AY 2019-2020
*******************
OVERVIEW OF HIGHER EDUCATION IN THE UNITED STATES
HISTORY OF HIGHER EDUCATION
SYSTEM OF HIGHER EDUCATION IN THE US
INSTITUTION TYPES
CARNEGIE CLASSIFICATION OF INSTITUTION OF HIGHER EDUCATION
THE CURRICULUM AND DEGREES
SELF-HELP FINANCIAL AID
CALENDAR, CREDITS, AND GRADING
FACULTY AND THEIR APPOINTMENTS
ACCREDITATION
TEACHING AND LEARNING
CHALLENGES FACING HIGHER EDUCATION IN THE US
CORONAVIRUS AND THE CAMPUS:
Similar to Accreditation: Institutions & Programs (20)
How to Add Chatter in the odoo 17 ERP ModuleCeline George
In Odoo, the chatter is like a chat tool that helps you work together on records. You can leave notes and track things, making it easier to talk with your team and partners. Inside chatter, all communication history, activity, and changes will be displayed.
This presentation was provided by Steph Pollock of The American Psychological Association’s Journals Program, and Damita Snow, of The American Society of Civil Engineers (ASCE), for the initial session of NISO's 2024 Training Series "DEIA in the Scholarly Landscape." Session One: 'Setting Expectations: a DEIA Primer,' was held June 6, 2024.
it describes the bony anatomy including the femoral head , acetabulum, labrum . also discusses the capsule , ligaments . muscle that act on the hip joint and the range of motion are outlined. factors affecting hip joint stability and weight transmission through the joint are summarized.
Leveraging Generative AI to Drive Nonprofit InnovationTechSoup
In this webinar, participants learned how to utilize Generative AI to streamline operations and elevate member engagement. Amazon Web Service experts provided a customer specific use cases and dived into low/no-code tools that are quick and easy to deploy through Amazon Web Service (AWS.)
This document provides an overview of wound healing, its functions, stages, mechanisms, factors affecting it, and complications.
A wound is a break in the integrity of the skin or tissues, which may be associated with disruption of the structure and function.
Healing is the body’s response to injury in an attempt to restore normal structure and functions.
Healing can occur in two ways: Regeneration and Repair
There are 4 phases of wound healing: hemostasis, inflammation, proliferation, and remodeling. This document also describes the mechanism of wound healing. Factors that affect healing include infection, uncontrolled diabetes, poor nutrition, age, anemia, the presence of foreign bodies, etc.
Complications of wound healing like infection, hyperpigmentation of scar, contractures, and keloid formation.
हिंदी वर्णमाला पीपीटी, hindi alphabet PPT presentation, hindi varnamala PPT, Hindi Varnamala pdf, हिंदी स्वर, हिंदी व्यंजन, sikhiye hindi varnmala, dr. mulla adam ali, hindi language and literature, hindi alphabet with drawing, hindi alphabet pdf, hindi varnamala for childrens, hindi language, hindi varnamala practice for kids, https://www.drmullaadamali.com
ISO/IEC 27001, ISO/IEC 42001, and GDPR: Best Practices for Implementation and...PECB
Denis is a dynamic and results-driven Chief Information Officer (CIO) with a distinguished career spanning information systems analysis and technical project management. With a proven track record of spearheading the design and delivery of cutting-edge Information Management solutions, he has consistently elevated business operations, streamlined reporting functions, and maximized process efficiency.
Certified as an ISO/IEC 27001: Information Security Management Systems (ISMS) Lead Implementer, Data Protection Officer, and Cyber Risks Analyst, Denis brings a heightened focus on data security, privacy, and cyber resilience to every endeavor.
His expertise extends across a diverse spectrum of reporting, database, and web development applications, underpinned by an exceptional grasp of data storage and virtualization technologies. His proficiency in application testing, database administration, and data cleansing ensures seamless execution of complex projects.
What sets Denis apart is his comprehensive understanding of Business and Systems Analysis technologies, honed through involvement in all phases of the Software Development Lifecycle (SDLC). From meticulous requirements gathering to precise analysis, innovative design, rigorous development, thorough testing, and successful implementation, he has consistently delivered exceptional results.
Throughout his career, he has taken on multifaceted roles, from leading technical project management teams to owning solutions that drive operational excellence. His conscientious and proactive approach is unwavering, whether he is working independently or collaboratively within a team. His ability to connect with colleagues on a personal level underscores his commitment to fostering a harmonious and productive workplace environment.
Date: May 29, 2024
Tags: Information Security, ISO/IEC 27001, ISO/IEC 42001, Artificial Intelligence, GDPR
-------------------------------------------------------------------------------
Find out more about ISO training and certification services
Training: ISO/IEC 27001 Information Security Management System - EN | PECB
ISO/IEC 42001 Artificial Intelligence Management System - EN | PECB
General Data Protection Regulation (GDPR) - Training Courses - EN | PECB
Webinars: https://pecb.com/webinars
Article: https://pecb.com/article
-------------------------------------------------------------------------------
For more information about PECB:
Website: https://pecb.com/
LinkedIn: https://www.linkedin.com/company/pecb/
Facebook: https://www.facebook.com/PECBInternational/
Slideshare: http://www.slideshare.net/PECBCERTIFICATION
Chapter wise All Notes of First year Basic Civil Engineering.pptxDenish Jangid
Chapter wise All Notes of First year Basic Civil Engineering
Syllabus
Chapter-1
Introduction to objective, scope and outcome the subject
Chapter 2
Introduction: Scope and Specialization of Civil Engineering, Role of civil Engineer in Society, Impact of infrastructural development on economy of country.
Chapter 3
Surveying: Object Principles & Types of Surveying; Site Plans, Plans & Maps; Scales & Unit of different Measurements.
Linear Measurements: Instruments used. Linear Measurement by Tape, Ranging out Survey Lines and overcoming Obstructions; Measurements on sloping ground; Tape corrections, conventional symbols. Angular Measurements: Instruments used; Introduction to Compass Surveying, Bearings and Longitude & Latitude of a Line, Introduction to total station.
Levelling: Instrument used Object of levelling, Methods of levelling in brief, and Contour maps.
Chapter 4
Buildings: Selection of site for Buildings, Layout of Building Plan, Types of buildings, Plinth area, carpet area, floor space index, Introduction to building byelaws, concept of sun light & ventilation. Components of Buildings & their functions, Basic concept of R.C.C., Introduction to types of foundation
Chapter 5
Transportation: Introduction to Transportation Engineering; Traffic and Road Safety: Types and Characteristics of Various Modes of Transportation; Various Road Traffic Signs, Causes of Accidents and Road Safety Measures.
Chapter 6
Environmental Engineering: Environmental Pollution, Environmental Acts and Regulations, Functional Concepts of Ecology, Basics of Species, Biodiversity, Ecosystem, Hydrological Cycle; Chemical Cycles: Carbon, Nitrogen & Phosphorus; Energy Flow in Ecosystems.
Water Pollution: Water Quality standards, Introduction to Treatment & Disposal of Waste Water. Reuse and Saving of Water, Rain Water Harvesting. Solid Waste Management: Classification of Solid Waste, Collection, Transportation and Disposal of Solid. Recycling of Solid Waste: Energy Recovery, Sanitary Landfill, On-Site Sanitation. Air & Noise Pollution: Primary and Secondary air pollutants, Harmful effects of Air Pollution, Control of Air Pollution. . Noise Pollution Harmful Effects of noise pollution, control of noise pollution, Global warming & Climate Change, Ozone depletion, Greenhouse effect
Text Books:
1. Palancharmy, Basic Civil Engineering, McGraw Hill publishers.
2. Satheesh Gopi, Basic Civil Engineering, Pearson Publishers.
3. Ketki Rangwala Dalal, Essentials of Civil Engineering, Charotar Publishing House.
4. BCP, Surveying volume 1
A workshop hosted by the South African Journal of Science aimed at postgraduate students and early career researchers with little or no experience in writing and publishing journal articles.
Walmart Business+ and Spark Good for Nonprofits.pdfTechSoup
"Learn about all the ways Walmart supports nonprofit organizations.
You will hear from Liz Willett, the Head of Nonprofits, and hear about what Walmart is doing to help nonprofits, including Walmart Business and Spark Good. Walmart Business+ is a new offer for nonprofits that offers discounts and also streamlines nonprofits order and expense tracking, saving time and money.
The webinar may also give some examples on how nonprofits can best leverage Walmart Business+.
The event will cover the following::
Walmart Business + (https://business.walmart.com/plus) is a new shopping experience for nonprofits, schools, and local business customers that connects an exclusive online shopping experience to stores. Benefits include free delivery and shipping, a 'Spend Analytics” feature, special discounts, deals and tax-exempt shopping.
Special TechSoup offer for a free 180 days membership, and up to $150 in discounts on eligible orders.
Spark Good (walmart.com/sparkgood) is a charitable platform that enables nonprofits to receive donations directly from customers and associates.
Answers about how you can do more with Walmart!"
7. Regional agencies
accredit more than
3,000 colleges &
universities.
National agencies
accredit more than
4,000 religious
& career oriented
institutions.
Programmatic
agencies accredit
more than 19,000
programs
throughout the
country.
Today
9. • Research Universities, Community Colleges,
Liberal Arts, & State Colleges
Regional Institutions are defined by a
geographical boundary:
10. • Research Universities, Community Colleges,
Liberal Arts, & State Colleges
Regional Institutions are defined by a
geographical boundary
• Technology, Business, Health,
& Religious Oriented Institutions
National Institutions are defined by a
specific curriculum
11. • Research Universities, Community Colleges,
Liberal Arts, & State Colleges
Regional Institutions are defined by a
geographical boundary
• Technology, Business, Health,
& Religious Oriented Institutions
National Institutions are defined by a
specific curriculum
• Engineering, Nursing, Law,
& Dentistry Programs
Academic Programs are defined by
industry preparation
SmartArt custom animation effects: upward arrow process(Basic)To reproduce the SmartArt effects on this slide, do the following:On the Home tab, in the Slides group, click Layout, and then clickBlank. On the Insert tab, in the Illustrations group, click SmartArt. In the Choose a SmartArt Graphic dialog box, in the left pane, click Process. In the Process pane, click Upward Arrow (sixth row, third option from the left), and then click OK to insert the graphic into the slide.Select the graphic, and then click one of the arrows on the left border. In the Type your text here dialog box, enter text. (Note: To create a bulleted list below each heading, select the heading text box in the Type your text here dialog box, and then under SmartArtTools, on the Design tab, in the CreateGraphic group, click AddBullet. Enter text into the new bullet text box.)On the slide, select the graphic. Under SmartArtTools, on the Design tab, in the SmartArtStyles group, do the following:Click ChangeColors, and then under Colorful click Colorful Range - Accent Colors 3 to 4 (third option from the left).Click More, and then under Best Match for Document click Intense Effect (fifth option from the left).On the Home tab, in the Font group, select Calibri from the Font list, and then select 24 from the Font Size list.Select the text in the first text box from the left. Under SmartArtTools, on the Format tab, in the WordArtStyles group, click the arrow next to TextFill, and then under Theme Colors clickOliveGreen, Accent 3, Darker 25% (fifth row, seventh option from the left).Select the text in the second text box from the left. Under SmartArtTools, on the Format tab, in the WordArtStyles group, click the arrow next to TextFill, and then under Theme Colors clickAqua, Accent 5, Darker 25% (fifth row, ninth option from the left).Select the text in the third text box from the left. Under SmartArtTools, on the Format tab, in the WordArtStyles group, click the arrow next to TextFill, and then under Theme Colors clickPurple, Accent 4, Darker 25% (fifth row, eighth option from the left).To reproduce the animation effects on this slide, do the following:On the Animations tab, in the Animations group, click CustomAnimation.On the slide, select the graphic. In the CustomAnimation task pane, do the following:Click Add Effect, point to Entrance, and then click MoreEffects. In the Add Entrance Effect dialog box, under Basic, click Wipe. Under Modify: Wipe, in the Direction list, select From Left.Under Modify: Wipe, in the Speed list, select Fast.Also in the Custom Animation task pane, select the wipe effect. Click the arrow to the right of the wipe effect, and then click Effect Options. In the Wipe dialog box, on the SmartArt Animation tab, in the Group graphic list, select One by one.Also in the Custom Animation task pane, click the double arrow under the wipe effect to expand the contents of the list of effects.Also in the Custom Animation task pane, select the second wipe effect and then do the following:Click Change, point to Entrance, and then click More Effects. In the Change Entrance Effect dialog box, under Exciting, click Curve Up.Under Modify: Curve Up,in the Start list, select With Previous. Under Modify: Curve Up,in the Speed list, select Very Fast.Also in the Custom Animation taskpane, select the third wipe effect and then do the following:Click Change, point to Entrance, and then click More Effects.In the Change Entrance Effect dialog box, under Moderate, click Descend.Under Modify: Descend,in the Start list, select With Previous. Under Modify: Descend,in the Speed list, select Very Fast.Click the arrow to the right of the third wipe effect, and then click Timing. In the Descend dialog box, on the Timing tab, in the Delay box, enter 0.5.Also in the Custom Animation task pane, select the fourth wipe effect and then do the following:Click Change, point to Entrance, and then click More Effects.In the Change Entrance Effect dialog box, under Exciting, click Curve Up.Under Modify: Curve Up,in the Start list, select On Click. Under Modify: Curve Up,in the Speed list, select Very Fast.Also in the Custom Animation taskpane, select the fifth wipe effect and then do the following:Click Change, point to Entrance, and then click More Effects.In the Change Entrance Effect dialog box, under Moderate, click Descend.Under Modify: Descend,in the Start list, select After Previous. Under Modify: Descend,in the Speed list, select Very Fast.Also in the Custom Animation task pane, select the sixth wipe effect and then do the following:Click Change, point to Entrance, and then click More Effects.In the Change Entrance Effect dialog box, under Exciting, click Curve Up.Under Modify: Curve Up,in the Start list, select On Click. Under Modify: Curve Up,in the Speed list, select Very Fast.Also in the Custom Animation task pane, select the seventh wipe effect and then do the following:Click Change, point to Entrance, and then click More Effects.In the Change Entrance Effect dialog box, under Moderate, click Descend.Under Modify: Descend,in the Start list, select After Previous. Under Modify: Descend,in the Speed list, select Very Fast.To reproduce the background effects on this slide, do the following:Right-click the slide background area, and then click Format Background. In the Format Background dialog box, click Fill in the left pane, select Gradient fill in the Fill pane, and then do the following:In the Type list, select Linear.In the Direction list, click Linear Right (first row, fourth option from the left).Under Gradient stops, click Add or Remove until two stops appear in the drop-down list.Also under Gradient stops, customize the gradient stops that you added as follows:Select Stop 1 from the list, and then do the following:In the Stop position box, enter 39%.Click the button next to Color, and then under Theme Colors click White, Background 1 (first row, first option from the left).Select Stop 2 from the list, and then do the following: In the Stop position box, enter 100%.Click the button next to Color, and then under Theme Colors click Olive Green, Accent 3, Lighter 60%(third row, seventh option from the left).To increase the size of the SmartArt graphic so that it spans the entire slide, do the following:On the slide, select the graphic. Point to the top right corner of the graphic border, until a two-headed arrow appears. Drag the top right corner of the graphic border into the top right corner of the slide. Point to the bottom left corner of the graphic border, until a two-headed arrow appears. Drag the bottom left corner of the graphic border into the bottom left corner of the slide.
SmartArt custom animation effects: upward arrow process(Basic)To reproduce the SmartArt effects on this slide, do the following:On the Home tab, in the Slides group, click Layout, and then clickBlank. On the Insert tab, in the Illustrations group, click SmartArt. In the Choose a SmartArt Graphic dialog box, in the left pane, click Process. In the Process pane, click Upward Arrow (sixth row, third option from the left), and then click OK to insert the graphic into the slide.Select the graphic, and then click one of the arrows on the left border. In the Type your text here dialog box, enter text. (Note: To create a bulleted list below each heading, select the heading text box in the Type your text here dialog box, and then under SmartArtTools, on the Design tab, in the CreateGraphic group, click AddBullet. Enter text into the new bullet text box.)On the slide, select the graphic. Under SmartArtTools, on the Design tab, in the SmartArtStyles group, do the following:Click ChangeColors, and then under Colorful click Colorful Range - Accent Colors 3 to 4 (third option from the left).Click More, and then under Best Match for Document click Intense Effect (fifth option from the left).On the Home tab, in the Font group, select Calibri from the Font list, and then select 24 from the Font Size list.Select the text in the first text box from the left. Under SmartArtTools, on the Format tab, in the WordArtStyles group, click the arrow next to TextFill, and then under Theme Colors clickOliveGreen, Accent 3, Darker 25% (fifth row, seventh option from the left).Select the text in the second text box from the left. Under SmartArtTools, on the Format tab, in the WordArtStyles group, click the arrow next to TextFill, and then under Theme Colors clickAqua, Accent 5, Darker 25% (fifth row, ninth option from the left).Select the text in the third text box from the left. Under SmartArtTools, on the Format tab, in the WordArtStyles group, click the arrow next to TextFill, and then under Theme Colors clickPurple, Accent 4, Darker 25% (fifth row, eighth option from the left).To reproduce the animation effects on this slide, do the following:On the Animations tab, in the Animations group, click CustomAnimation.On the slide, select the graphic. In the CustomAnimation task pane, do the following:Click Add Effect, point to Entrance, and then click MoreEffects. In the Add Entrance Effect dialog box, under Basic, click Wipe. Under Modify: Wipe, in the Direction list, select From Left.Under Modify: Wipe, in the Speed list, select Fast.Also in the Custom Animation task pane, select the wipe effect. Click the arrow to the right of the wipe effect, and then click Effect Options. In the Wipe dialog box, on the SmartArt Animation tab, in the Group graphic list, select One by one.Also in the Custom Animation task pane, click the double arrow under the wipe effect to expand the contents of the list of effects.Also in the Custom Animation task pane, select the second wipe effect and then do the following:Click Change, point to Entrance, and then click More Effects. In the Change Entrance Effect dialog box, under Exciting, click Curve Up.Under Modify: Curve Up,in the Start list, select With Previous. Under Modify: Curve Up,in the Speed list, select Very Fast.Also in the Custom Animation taskpane, select the third wipe effect and then do the following:Click Change, point to Entrance, and then click More Effects.In the Change Entrance Effect dialog box, under Moderate, click Descend.Under Modify: Descend,in the Start list, select With Previous. Under Modify: Descend,in the Speed list, select Very Fast.Click the arrow to the right of the third wipe effect, and then click Timing. In the Descend dialog box, on the Timing tab, in the Delay box, enter 0.5.Also in the Custom Animation task pane, select the fourth wipe effect and then do the following:Click Change, point to Entrance, and then click More Effects.In the Change Entrance Effect dialog box, under Exciting, click Curve Up.Under Modify: Curve Up,in the Start list, select On Click. Under Modify: Curve Up,in the Speed list, select Very Fast.Also in the Custom Animation taskpane, select the fifth wipe effect and then do the following:Click Change, point to Entrance, and then click More Effects.In the Change Entrance Effect dialog box, under Moderate, click Descend.Under Modify: Descend,in the Start list, select After Previous. Under Modify: Descend,in the Speed list, select Very Fast.Also in the Custom Animation task pane, select the sixth wipe effect and then do the following:Click Change, point to Entrance, and then click More Effects.In the Change Entrance Effect dialog box, under Exciting, click Curve Up.Under Modify: Curve Up,in the Start list, select On Click. Under Modify: Curve Up,in the Speed list, select Very Fast.Also in the Custom Animation task pane, select the seventh wipe effect and then do the following:Click Change, point to Entrance, and then click More Effects.In the Change Entrance Effect dialog box, under Moderate, click Descend.Under Modify: Descend,in the Start list, select After Previous. Under Modify: Descend,in the Speed list, select Very Fast.To reproduce the background effects on this slide, do the following:Right-click the slide background area, and then click Format Background. In the Format Background dialog box, click Fill in the left pane, select Gradient fill in the Fill pane, and then do the following:In the Type list, select Linear.In the Direction list, click Linear Right (first row, fourth option from the left).Under Gradient stops, click Add or Remove until two stops appear in the drop-down list.Also under Gradient stops, customize the gradient stops that you added as follows:Select Stop 1 from the list, and then do the following:In the Stop position box, enter 39%.Click the button next to Color, and then under Theme Colors click White, Background 1 (first row, first option from the left).Select Stop 2 from the list, and then do the following: In the Stop position box, enter 100%.Click the button next to Color, and then under Theme Colors click Olive Green, Accent 3, Lighter 60%(third row, seventh option from the left).To increase the size of the SmartArt graphic so that it spans the entire slide, do the following:On the slide, select the graphic. Point to the top right corner of the graphic border, until a two-headed arrow appears. Drag the top right corner of the graphic border into the top right corner of the slide. Point to the bottom left corner of the graphic border, until a two-headed arrow appears. Drag the bottom left corner of the graphic border into the bottom left corner of the slide.
SmartArt custom animation effects: upward arrow process(Basic)To reproduce the SmartArt effects on this slide, do the following:On the Home tab, in the Slides group, click Layout, and then clickBlank. On the Insert tab, in the Illustrations group, click SmartArt. In the Choose a SmartArt Graphic dialog box, in the left pane, click Process. In the Process pane, click Upward Arrow (sixth row, third option from the left), and then click OK to insert the graphic into the slide.Select the graphic, and then click one of the arrows on the left border. In the Type your text here dialog box, enter text. (Note: To create a bulleted list below each heading, select the heading text box in the Type your text here dialog box, and then under SmartArtTools, on the Design tab, in the CreateGraphic group, click AddBullet. Enter text into the new bullet text box.)On the slide, select the graphic. Under SmartArtTools, on the Design tab, in the SmartArtStyles group, do the following:Click ChangeColors, and then under Colorful click Colorful Range - Accent Colors 3 to 4 (third option from the left).Click More, and then under Best Match for Document click Intense Effect (fifth option from the left).On the Home tab, in the Font group, select Calibri from the Font list, and then select 24 from the Font Size list.Select the text in the first text box from the left. Under SmartArtTools, on the Format tab, in the WordArtStyles group, click the arrow next to TextFill, and then under Theme Colors clickOliveGreen, Accent 3, Darker 25% (fifth row, seventh option from the left).Select the text in the second text box from the left. Under SmartArtTools, on the Format tab, in the WordArtStyles group, click the arrow next to TextFill, and then under Theme Colors clickAqua, Accent 5, Darker 25% (fifth row, ninth option from the left).Select the text in the third text box from the left. Under SmartArtTools, on the Format tab, in the WordArtStyles group, click the arrow next to TextFill, and then under Theme Colors clickPurple, Accent 4, Darker 25% (fifth row, eighth option from the left).To reproduce the animation effects on this slide, do the following:On the Animations tab, in the Animations group, click CustomAnimation.On the slide, select the graphic. In the CustomAnimation task pane, do the following:Click Add Effect, point to Entrance, and then click MoreEffects. In the Add Entrance Effect dialog box, under Basic, click Wipe. Under Modify: Wipe, in the Direction list, select From Left.Under Modify: Wipe, in the Speed list, select Fast.Also in the Custom Animation task pane, select the wipe effect. Click the arrow to the right of the wipe effect, and then click Effect Options. In the Wipe dialog box, on the SmartArt Animation tab, in the Group graphic list, select One by one.Also in the Custom Animation task pane, click the double arrow under the wipe effect to expand the contents of the list of effects.Also in the Custom Animation task pane, select the second wipe effect and then do the following:Click Change, point to Entrance, and then click More Effects. In the Change Entrance Effect dialog box, under Exciting, click Curve Up.Under Modify: Curve Up,in the Start list, select With Previous. Under Modify: Curve Up,in the Speed list, select Very Fast.Also in the Custom Animation taskpane, select the third wipe effect and then do the following:Click Change, point to Entrance, and then click More Effects.In the Change Entrance Effect dialog box, under Moderate, click Descend.Under Modify: Descend,in the Start list, select With Previous. Under Modify: Descend,in the Speed list, select Very Fast.Click the arrow to the right of the third wipe effect, and then click Timing. In the Descend dialog box, on the Timing tab, in the Delay box, enter 0.5.Also in the Custom Animation task pane, select the fourth wipe effect and then do the following:Click Change, point to Entrance, and then click More Effects.In the Change Entrance Effect dialog box, under Exciting, click Curve Up.Under Modify: Curve Up,in the Start list, select On Click. Under Modify: Curve Up,in the Speed list, select Very Fast.Also in the Custom Animation taskpane, select the fifth wipe effect and then do the following:Click Change, point to Entrance, and then click More Effects.In the Change Entrance Effect dialog box, under Moderate, click Descend.Under Modify: Descend,in the Start list, select After Previous. Under Modify: Descend,in the Speed list, select Very Fast.Also in the Custom Animation task pane, select the sixth wipe effect and then do the following:Click Change, point to Entrance, and then click More Effects.In the Change Entrance Effect dialog box, under Exciting, click Curve Up.Under Modify: Curve Up,in the Start list, select On Click. Under Modify: Curve Up,in the Speed list, select Very Fast.Also in the Custom Animation task pane, select the seventh wipe effect and then do the following:Click Change, point to Entrance, and then click More Effects.In the Change Entrance Effect dialog box, under Moderate, click Descend.Under Modify: Descend,in the Start list, select After Previous. Under Modify: Descend,in the Speed list, select Very Fast.To reproduce the background effects on this slide, do the following:Right-click the slide background area, and then click Format Background. In the Format Background dialog box, click Fill in the left pane, select Gradient fill in the Fill pane, and then do the following:In the Type list, select Linear.In the Direction list, click Linear Right (first row, fourth option from the left).Under Gradient stops, click Add or Remove until two stops appear in the drop-down list.Also under Gradient stops, customize the gradient stops that you added as follows:Select Stop 1 from the list, and then do the following:In the Stop position box, enter 39%.Click the button next to Color, and then under Theme Colors click White, Background 1 (first row, first option from the left).Select Stop 2 from the list, and then do the following: In the Stop position box, enter 100%.Click the button next to Color, and then under Theme Colors click Olive Green, Accent 3, Lighter 60%(third row, seventh option from the left).To increase the size of the SmartArt graphic so that it spans the entire slide, do the following:On the slide, select the graphic. Point to the top right corner of the graphic border, until a two-headed arrow appears. Drag the top right corner of the graphic border into the top right corner of the slide. Point to the bottom left corner of the graphic border, until a two-headed arrow appears. Drag the bottom left corner of the graphic border into the bottom left corner of the slide.
SmartArt custom animation effects: horizontal picture list(Intermediate)To reproduce the SmartArt effects on this page, do the following:On the Home tab, in the Slides group, click Layout, and then clickBlank. On the Insert tab, in the Illustrations group, click SmartArt.In the Choose a SmartArt Graphic dialog box, in the left pane, click List. In the List pane, double-click Horizontal Picture List (third row, third option from the left) to insert the graphic into the slide. Press and hold CTRL, and select the picture placeholder and text shape (top and bottom shape) in one of the objects. Under SmartArt Tools,on the Design tab, in the Create Graphic group, click Add Shape, and then click Add Shape After. Repeat this process one more time for a total of five picture placeholders and text shapes. Select the graphic. Under SmartArt Tools, on the Format tab, click Size, and then do the following:In the Height box, enter 4.44”.In the Width box, enter 9.25”.Under SmartArt Tools, on the Format tab, click Arrange, click Align, and then do the following:Click Align to Slide.Click Align Middle. Click Align Center. Select the graphic, and then click one of the arrows on the left border. In the Type your text here dialog box, enter text.Press and hold CTRL, and then select all five text boxes in the graphic. On the Home tab, in the Font group, select Corbel from the Font list,and then enter 22 in the Font Size box.Select the graphic. Under SmartArtTools, on the Design tab, in the SmartArtStyles group, do the following: Click ChangeColors, and then under Colorful click Colorful Range – Accent Colors 2 to 3 (second option from the left).Click More, and then under Best Match for Document click Moderate Effect (fourth option from the left).Select the rounded rectangle at the top of the graphic. Under SmartArtTools, on the Format tab, in the ShapeStyles group, click the arrow next to ShapeFill, and then under Theme Colors clickWhite, Background 1, Darker 35% (fifth row, first option from the left).Click each of the five picture placeholders in the SmartArt graphic, select a picture, and then click Insert.To reproduce the animation effects on this slide, do the following:On the Animations tab, in the Animations group, click CustomAnimation.On the slide, select the graphic. In the CustomAnimation task pane, do the following:Click Add Effect, point to Entrance, and then click MoreEffects. In the Add Entrance Effect dialog box, under Moderate, click Ascend. Under Modify: Ascend, in the Speed list, select Fast.Also in the Custom Animation taskpane, click the arrow to the right of the animation effect, and then click Effect Options. In the Ascend dialog box, on the SmartArtAnimation tab, in the Group Graphic list, select One by one.Also in the Custom Animation task pane, click the double-arrow below the animation effect to expand the list of effects.Also in the Custom Animation task pane, do the following to modify the list of effects:Select the first animation effect, and then do the following:Click Change, point toEntrance, and then clickMoreEffects. In the Change Entrance Effect dialog box, under Moderate, click Compress. Under Modify: Compress, in the Start list, select With Previous.Press and hold CTRL, select the third, fifth, seventh, ninth, and 11th animation effects (effects for the text shapes), and then do the following:Click Change, point toEntrance, and then clickMoreEffects. In the Change Entrance Effect dialog box, under Basic, click Peek In, and then click OK. Under Modify: Peek In, in the Direction list, select From Top.Under Modify: Peek In, in the Speed list, select Fast.Press and hold CTRL, select the second, fourth, sixth, eighth, and 10th animation effects (effects for the pictures). Under Modify: Ascend, in the Start list, selectAfter Previous.To reproduce the background effects on this slide, do the following:Right-click the slide background area, and then click Format Background. In the Format Background dialog box, click Fill in the left pane, select Gradient fill in the Fill pane, and then do the following:In the Type list, select Linear.Click the button next to Direction, and then click Linear Down (first row, second option from the left).Under Gradient stops, click Add or Remove until two stops appear in the drop-down list.Also under Gradient stops, customize the gradient stops as follows:Select Stop 1 from the list, and then do the following:In the Stop position box, enter 0%.Click the button next to Color, click More Colors, and then in the Colors dialog box, on the Custom tab, enter values for Red: 130, Green: 126, and Blue: 102.Select Stop 2 from the list, and then do the following: In the Stop position box, enter 71%.Click the button next to Color, and then click Black, Text 1(first row, second option from the left).
SmartArt custom animation effects: vertical box list(Intermediate)To reproduce the SmartArt effects on this slide, do the following:On the Home tab, in the Slides group, click Layout, and then clickBlank. On the Insert tab, in the Illustrations group, click SmartArt. In the Choose a SmartArt Graphic dialog box, in the left pane, click List. In the List pane, click Vertical Box List (first row, fourth option from the left), and then click OK to insert the graphic into the slide.Press and hold CTRL, and then select the third pair of rectangles from the top (both the smaller, first-level rectangle and the larger, second-level rectangle). Under SmartArtTools, on the Design tab, in the CreateGraphic group, click the arrow next to AddShape, and then click AddShapeAfter.Select the graphic, and then click one of the arrows on the left border. In the Type your text here dialog box, enter text. (Note: To create a bullet below each heading, select the heading text box in the Type your text here dialog box, and then under SmartArtTools, on the Design tab, in the CreateGraphic group, click AddBullet. Enter text into the new bullet text box.)Select the graphic. Under SmartArt Tools, on the Format tab, click Size, and then do the following:In the Height box, enter 5.92”.In the Width box, enter 6.67”.Under SmartArt Tools, on the Format tab, click Arrange, click Align, and then do the following:Click Align to Slide.Click Align Middle. Click Align Center. On the Design tab, in the Themes group, click Colors, and then under Built-in click Civic. (Note: if this action is taken in a PowerPoint presentation containing more than one slide, the color scheme will be applied to all of the slides.)Under SmartArtTools, on the Design tab, in the SmartArtStyles group, do the following:Click ChangeColors, and then under Accent 1 click Colored Fill – Accent 1 (second option from the left).Click More, and then under 3-D click Polished (first row, first option from the left).Press and hold CTRL, and then select the four larger, second-level rectangles. Under SmartArtTools, on the Format tab, in the Shapes group, click ChangeShape, and then under Rectangles click Rounded Rectangle (second option from the left).On the Home tab, in the Font group, select Franklin Gothic Book from the Font list, and then select 24 from the Font Size list.Under SmartArtTools, on the Format tab, in the Shape Styles group, click the arrow next to Shape Fill, point to Gradient, and then click More Gradients. In the Format Shape dialog box, in the left pane, click Fill, select Gradient fill in the Fill pane, and then do the following:In the Type list, select Linear.Click the button next to Direction, and then click Linear Up (second row, second option from the left).Under Gradient stops, click Add or Remove until two stops appear in the drop-down list.Also under Gradient stops, customize the gradient stops as follows:Select Stop 1 from the list, and then do the following:In the Stop position box, enter 0%.Click the button next to Color, and then under Theme Colors click White, Background 1, Darker 35% (fifth row, first option from the left).Select Stop 2 from the list, and then do the following: In the Stop position box, enter 100%.Click the button next to Color, and then click Black, Text 1, Lighter 25% (fourth row, second option from the left). Also in the Format Shape dialog box, in the left pane, click 3-D Format, and then do the following in the 3-D Format pane:Under Bevel, click the button next to Top, and then under Bevel click Circle (first row, first option from the left).Next to Top, in the Width box, enter 4 pt,and in the Height box, enter 4 pt.Under Depth,in the Depth box, enter 1 pt.Under Surface, click the button next to Material, and then under Standard click Plastic (third option from the left). Click the button next to Lighting, and then under Special click Flat (first option from the left). On the slide, press and hold CTRL, and then select the four smaller, first-level rectangles. On the Home tab, in the Font group, select Franklin Gothic Medium from the Font list, and then enter 26 in the Font Size box.Select the top first-level rectangle. Under SmartArtTools, on the Format tab, in the Shape Styles group, click the arrow next to Shape Fill, point to Gradient, and then click More Gradients. In the Format Shape dialog box, in the left pane, click Fill, select Gradient fill in the Fill pane, and then do the following:In the Type list, select Linear.Click the button next to Direction, and then click Linear Up (second row, second option from the left).Under Gradient stops, click Add or Remove until two stops appear in the drop-down list.Also under Gradient stops, customize the gradient stops as follows:Select Stop 1 from the list, and then do the following:In the Stop position box, enter 0%.Click the button next to Color, and then under Theme Colors click Teal, Accent 3, Darker 50% (sixth row, seventh option from the left).Select Stop 2 from the list, and then do the following: In the Stop position box, enter 100%.Click the button next to Color, and then under Theme Colors click Teal, Accent 3, Darker 25% (fifth row, seventh option from the left).Select the second first-level rectangle. Under SmartArtTools, on the Format tab, in the Shape Styles group, click the arrow next to Shape Fill, point to Gradient, and then click More Gradients. In the Format Shape dialog box, in the left pane, click Fill, select Gradient fill in the Fill pane, and then do the following:In the Type list, select Linear.Click the button next to Direction, and then click Linear Up (second row, second option from the left).Under Gradient stops, click Add or Remove until two stops appear in the drop-down list.Also under Gradient stops, customize the gradient stops as follows:Select Stop 1 from the list, and then do the following:In the Stop position box, enter 0%.Click the button next to Color, and then under Theme Colors click Brown, Accent 4, Darker 50% (sixth row, eighth option from the left).Select Stop 2 from the list, and then do the following: In the Stop position box, enter 100%.Click the button next to Color, and then under Theme Colors click Brown, Accent 4, Darker 25% (fifth row, eighth option from the left).Select the third first-level rectangle. Under SmartArtTools, on the Format tab, in the Shape Styles group, click the arrow next to Shape Fill, point to Gradient, and then click More Gradients. In the Format Shape dialog box, in the left pane, click Fill, select Gradient fill in the Fill pane, and then do the following:In the Type list, select Linear.Click the button next to Direction, and then click Linear Up (second row, second option from the left).Under Gradient stops, click Add or Remove until two stops appear in the drop-down list.Also under Gradient stops, customize the gradient stops as follows:Select Stop 1 from the list, and then do the following:In the Stop position box, enter 0%.Click the button next to Color, and then under Theme Colors click Green, Accent 5, Darker 50% (sixth row, ninth option from the left).Select Stop 2 from the list, and then do the following: In the Stop position box, enter 100%.Click the button next to Color, and then under Theme Colors click Green, Accent 5, Darker 25% (fifth row, ninth option from the left).Select the fourth first-level rectangle. Under SmartArtTools, on the Format tab, in the Shape Styles group, click the arrow next to Shape Fill, point to Gradient, and then click More Gradients. In the Format Shape dialog box, in the left pane, click Fill, select Gradient fill in the Fill pane, and then do the following:In the Type list, select Linear.Click the button next to Direction, and then click Linear Up (second row, second option from the left).Under Gradient stops, click Add or Remove until two stops appear in the drop-down list.Also under Gradient stops, customize the gradient stops as follows:Select Stop 1 from the list, and then do the following:In the Stop position box, enter 0%.Click the button next to Color, and then under Theme Colors click Orange, Accent 6, Darker 50% (sixth row, 10th option from the left).Select Stop 2 from the list, and then do the following: In the Stop position box, enter 100%.Click the button next to Color, and then under Theme Colors click Orange, Accent 6, Darker 20% (fifth row, 10th option from the left).To reproduce the animation effects on this slide, do the following:On the Animations tab, in the Animations group, click CustomAnimation.On the slide, select the graphic. In the CustomAnimation task pane, do the following:Click Add Effect, point to Entrance, and then click MoreEffects. In the Add Entrance Effect dialog box, under Subtle, click Expand.Under Modify: Expand, in the Speed list, select Fast.Also in the CustomAnimation task pane, select the animation effect. Click the arrow to the right of the animation effect, and then click EffectOptions. In the Expand dialog box, on the SmartArtAnimation tab, in the Group graphic list, select One by one.Also in the Custom Animation task pane, click the double arrow under the animation effect to expand the contents of the list of effects, and then do the following:Press and hold CTRL, and then select all of the animation effects. Under Modify: Expand, in the Start list, select With Previous.Press and hold CTRL, and then select the second, fourth, sixth and eighth animation effects (expand effects for the larger, second-level rectangles). Click Change, point to Entrance, and then click MoreEffects. In the Change Entrance Effect dialog box, under Moderate, click Compress. Press and hold CTRL, and then select the third, fifth, and seventh animation effects. Under Modify: Expand, in the Start list, select On Click.To reproduce the background effects on this slide, do the following:Right-click the slide background area, and then click Format Background. In the Format Background dialog box, click Fill in the left pane, select Gradient fill in the Fill pane, and then do the following:In the Type list, select Linear.Click the button next to Direction, and then click Linear Down (first row, second option from the left).Under Gradient stops, click Add or Remove until two stops appear in the drop-down list.Also under Gradient stops, customize the gradient stops that you added as follows:Select Stop 1 from the list, and then do the following:In the Stop position box, enter 63%.Click the button next to Color, and then under Theme Colors click Black, Text 1 (first row, second option from the left).Select Stop 2 from the list, and then do the following: In the Stop position box, enter 100%.Click the button next to Color, and then under Theme Colors clickBlack, Text 1, Lighter 50% (second row, second option from the left).
SmartArt custom animation effects: vertical box list(Intermediate)To reproduce the SmartArt effects on this slide, do the following:On the Home tab, in the Slides group, click Layout, and then clickBlank. On the Insert tab, in the Illustrations group, click SmartArt. In the Choose a SmartArt Graphic dialog box, in the left pane, click List. In the List pane, click Vertical Box List (first row, fourth option from the left), and then click OK to insert the graphic into the slide.Press and hold CTRL, and then select the third pair of rectangles from the top (both the smaller, first-level rectangle and the larger, second-level rectangle). Under SmartArtTools, on the Design tab, in the CreateGraphic group, click the arrow next to AddShape, and then click AddShapeAfter.Select the graphic, and then click one of the arrows on the left border. In the Type your text here dialog box, enter text. (Note: To create a bullet below each heading, select the heading text box in the Type your text here dialog box, and then under SmartArtTools, on the Design tab, in the CreateGraphic group, click AddBullet. Enter text into the new bullet text box.)Select the graphic. Under SmartArt Tools, on the Format tab, click Size, and then do the following:In the Height box, enter 5.92”.In the Width box, enter 6.67”.Under SmartArt Tools, on the Format tab, click Arrange, click Align, and then do the following:Click Align to Slide.Click Align Middle. Click Align Center. On the Design tab, in the Themes group, click Colors, and then under Built-in click Civic. (Note: if this action is taken in a PowerPoint presentation containing more than one slide, the color scheme will be applied to all of the slides.)Under SmartArtTools, on the Design tab, in the SmartArtStyles group, do the following:Click ChangeColors, and then under Accent 1 click Colored Fill – Accent 1 (second option from the left).Click More, and then under 3-D click Polished (first row, first option from the left).Press and hold CTRL, and then select the four larger, second-level rectangles. Under SmartArtTools, on the Format tab, in the Shapes group, click ChangeShape, and then under Rectangles click Rounded Rectangle (second option from the left).On the Home tab, in the Font group, select Franklin Gothic Book from the Font list, and then select 24 from the Font Size list.Under SmartArtTools, on the Format tab, in the Shape Styles group, click the arrow next to Shape Fill, point to Gradient, and then click More Gradients. In the Format Shape dialog box, in the left pane, click Fill, select Gradient fill in the Fill pane, and then do the following:In the Type list, select Linear.Click the button next to Direction, and then click Linear Up (second row, second option from the left).Under Gradient stops, click Add or Remove until two stops appear in the drop-down list.Also under Gradient stops, customize the gradient stops as follows:Select Stop 1 from the list, and then do the following:In the Stop position box, enter 0%.Click the button next to Color, and then under Theme Colors click White, Background 1, Darker 35% (fifth row, first option from the left).Select Stop 2 from the list, and then do the following: In the Stop position box, enter 100%.Click the button next to Color, and then click Black, Text 1, Lighter 25% (fourth row, second option from the left). Also in the Format Shape dialog box, in the left pane, click 3-D Format, and then do the following in the 3-D Format pane:Under Bevel, click the button next to Top, and then under Bevel click Circle (first row, first option from the left).Next to Top, in the Width box, enter 4 pt,and in the Height box, enter 4 pt.Under Depth,in the Depth box, enter 1 pt.Under Surface, click the button next to Material, and then under Standard click Plastic (third option from the left). Click the button next to Lighting, and then under Special click Flat (first option from the left). On the slide, press and hold CTRL, and then select the four smaller, first-level rectangles. On the Home tab, in the Font group, select Franklin Gothic Medium from the Font list, and then enter 26 in the Font Size box.Select the top first-level rectangle. Under SmartArtTools, on the Format tab, in the Shape Styles group, click the arrow next to Shape Fill, point to Gradient, and then click More Gradients. In the Format Shape dialog box, in the left pane, click Fill, select Gradient fill in the Fill pane, and then do the following:In the Type list, select Linear.Click the button next to Direction, and then click Linear Up (second row, second option from the left).Under Gradient stops, click Add or Remove until two stops appear in the drop-down list.Also under Gradient stops, customize the gradient stops as follows:Select Stop 1 from the list, and then do the following:In the Stop position box, enter 0%.Click the button next to Color, and then under Theme Colors click Teal, Accent 3, Darker 50% (sixth row, seventh option from the left).Select Stop 2 from the list, and then do the following: In the Stop position box, enter 100%.Click the button next to Color, and then under Theme Colors click Teal, Accent 3, Darker 25% (fifth row, seventh option from the left).Select the second first-level rectangle. Under SmartArtTools, on the Format tab, in the Shape Styles group, click the arrow next to Shape Fill, point to Gradient, and then click More Gradients. In the Format Shape dialog box, in the left pane, click Fill, select Gradient fill in the Fill pane, and then do the following:In the Type list, select Linear.Click the button next to Direction, and then click Linear Up (second row, second option from the left).Under Gradient stops, click Add or Remove until two stops appear in the drop-down list.Also under Gradient stops, customize the gradient stops as follows:Select Stop 1 from the list, and then do the following:In the Stop position box, enter 0%.Click the button next to Color, and then under Theme Colors click Brown, Accent 4, Darker 50% (sixth row, eighth option from the left).Select Stop 2 from the list, and then do the following: In the Stop position box, enter 100%.Click the button next to Color, and then under Theme Colors click Brown, Accent 4, Darker 25% (fifth row, eighth option from the left).Select the third first-level rectangle. Under SmartArtTools, on the Format tab, in the Shape Styles group, click the arrow next to Shape Fill, point to Gradient, and then click More Gradients. In the Format Shape dialog box, in the left pane, click Fill, select Gradient fill in the Fill pane, and then do the following:In the Type list, select Linear.Click the button next to Direction, and then click Linear Up (second row, second option from the left).Under Gradient stops, click Add or Remove until two stops appear in the drop-down list.Also under Gradient stops, customize the gradient stops as follows:Select Stop 1 from the list, and then do the following:In the Stop position box, enter 0%.Click the button next to Color, and then under Theme Colors click Green, Accent 5, Darker 50% (sixth row, ninth option from the left).Select Stop 2 from the list, and then do the following: In the Stop position box, enter 100%.Click the button next to Color, and then under Theme Colors click Green, Accent 5, Darker 25% (fifth row, ninth option from the left).Select the fourth first-level rectangle. Under SmartArtTools, on the Format tab, in the Shape Styles group, click the arrow next to Shape Fill, point to Gradient, and then click More Gradients. In the Format Shape dialog box, in the left pane, click Fill, select Gradient fill in the Fill pane, and then do the following:In the Type list, select Linear.Click the button next to Direction, and then click Linear Up (second row, second option from the left).Under Gradient stops, click Add or Remove until two stops appear in the drop-down list.Also under Gradient stops, customize the gradient stops as follows:Select Stop 1 from the list, and then do the following:In the Stop position box, enter 0%.Click the button next to Color, and then under Theme Colors click Orange, Accent 6, Darker 50% (sixth row, 10th option from the left).Select Stop 2 from the list, and then do the following: In the Stop position box, enter 100%.Click the button next to Color, and then under Theme Colors click Orange, Accent 6, Darker 20% (fifth row, 10th option from the left).To reproduce the animation effects on this slide, do the following:On the Animations tab, in the Animations group, click CustomAnimation.On the slide, select the graphic. In the CustomAnimation task pane, do the following:Click Add Effect, point to Entrance, and then click MoreEffects. In the Add Entrance Effect dialog box, under Subtle, click Expand.Under Modify: Expand, in the Speed list, select Fast.Also in the CustomAnimation task pane, select the animation effect. Click the arrow to the right of the animation effect, and then click EffectOptions. In the Expand dialog box, on the SmartArtAnimation tab, in the Group graphic list, select One by one.Also in the Custom Animation task pane, click the double arrow under the animation effect to expand the contents of the list of effects, and then do the following:Press and hold CTRL, and then select all of the animation effects. Under Modify: Expand, in the Start list, select With Previous.Press and hold CTRL, and then select the second, fourth, sixth and eighth animation effects (expand effects for the larger, second-level rectangles). Click Change, point to Entrance, and then click MoreEffects. In the Change Entrance Effect dialog box, under Moderate, click Compress. Press and hold CTRL, and then select the third, fifth, and seventh animation effects. Under Modify: Expand, in the Start list, select On Click.To reproduce the background effects on this slide, do the following:Right-click the slide background area, and then click Format Background. In the Format Background dialog box, click Fill in the left pane, select Gradient fill in the Fill pane, and then do the following:In the Type list, select Linear.Click the button next to Direction, and then click Linear Down (first row, second option from the left).Under Gradient stops, click Add or Remove until two stops appear in the drop-down list.Also under Gradient stops, customize the gradient stops that you added as follows:Select Stop 1 from the list, and then do the following:In the Stop position box, enter 63%.Click the button next to Color, and then under Theme Colors click Black, Text 1 (first row, second option from the left).Select Stop 2 from the list, and then do the following: In the Stop position box, enter 100%.Click the button next to Color, and then under Theme Colors clickBlack, Text 1, Lighter 50% (second row, second option from the left).
SmartArt custom animation effects: vertical box list(Intermediate)To reproduce the SmartArt effects on this slide, do the following:On the Home tab, in the Slides group, click Layout, and then clickBlank. On the Insert tab, in the Illustrations group, click SmartArt. In the Choose a SmartArt Graphic dialog box, in the left pane, click List. In the List pane, click Vertical Box List (first row, fourth option from the left), and then click OK to insert the graphic into the slide.Press and hold CTRL, and then select the third pair of rectangles from the top (both the smaller, first-level rectangle and the larger, second-level rectangle). Under SmartArtTools, on the Design tab, in the CreateGraphic group, click the arrow next to AddShape, and then click AddShapeAfter.Select the graphic, and then click one of the arrows on the left border. In the Type your text here dialog box, enter text. (Note: To create a bullet below each heading, select the heading text box in the Type your text here dialog box, and then under SmartArtTools, on the Design tab, in the CreateGraphic group, click AddBullet. Enter text into the new bullet text box.)Select the graphic. Under SmartArt Tools, on the Format tab, click Size, and then do the following:In the Height box, enter 5.92”.In the Width box, enter 6.67”.Under SmartArt Tools, on the Format tab, click Arrange, click Align, and then do the following:Click Align to Slide.Click Align Middle. Click Align Center. On the Design tab, in the Themes group, click Colors, and then under Built-in click Civic. (Note: if this action is taken in a PowerPoint presentation containing more than one slide, the color scheme will be applied to all of the slides.)Under SmartArtTools, on the Design tab, in the SmartArtStyles group, do the following:Click ChangeColors, and then under Accent 1 click Colored Fill – Accent 1 (second option from the left).Click More, and then under 3-D click Polished (first row, first option from the left).Press and hold CTRL, and then select the four larger, second-level rectangles. Under SmartArtTools, on the Format tab, in the Shapes group, click ChangeShape, and then under Rectangles click Rounded Rectangle (second option from the left).On the Home tab, in the Font group, select Franklin Gothic Book from the Font list, and then select 24 from the Font Size list.Under SmartArtTools, on the Format tab, in the Shape Styles group, click the arrow next to Shape Fill, point to Gradient, and then click More Gradients. In the Format Shape dialog box, in the left pane, click Fill, select Gradient fill in the Fill pane, and then do the following:In the Type list, select Linear.Click the button next to Direction, and then click Linear Up (second row, second option from the left).Under Gradient stops, click Add or Remove until two stops appear in the drop-down list.Also under Gradient stops, customize the gradient stops as follows:Select Stop 1 from the list, and then do the following:In the Stop position box, enter 0%.Click the button next to Color, and then under Theme Colors click White, Background 1, Darker 35% (fifth row, first option from the left).Select Stop 2 from the list, and then do the following: In the Stop position box, enter 100%.Click the button next to Color, and then click Black, Text 1, Lighter 25% (fourth row, second option from the left). Also in the Format Shape dialog box, in the left pane, click 3-D Format, and then do the following in the 3-D Format pane:Under Bevel, click the button next to Top, and then under Bevel click Circle (first row, first option from the left).Next to Top, in the Width box, enter 4 pt,and in the Height box, enter 4 pt.Under Depth,in the Depth box, enter 1 pt.Under Surface, click the button next to Material, and then under Standard click Plastic (third option from the left). Click the button next to Lighting, and then under Special click Flat (first option from the left). On the slide, press and hold CTRL, and then select the four smaller, first-level rectangles. On the Home tab, in the Font group, select Franklin Gothic Medium from the Font list, and then enter 26 in the Font Size box.Select the top first-level rectangle. Under SmartArtTools, on the Format tab, in the Shape Styles group, click the arrow next to Shape Fill, point to Gradient, and then click More Gradients. In the Format Shape dialog box, in the left pane, click Fill, select Gradient fill in the Fill pane, and then do the following:In the Type list, select Linear.Click the button next to Direction, and then click Linear Up (second row, second option from the left).Under Gradient stops, click Add or Remove until two stops appear in the drop-down list.Also under Gradient stops, customize the gradient stops as follows:Select Stop 1 from the list, and then do the following:In the Stop position box, enter 0%.Click the button next to Color, and then under Theme Colors click Teal, Accent 3, Darker 50% (sixth row, seventh option from the left).Select Stop 2 from the list, and then do the following: In the Stop position box, enter 100%.Click the button next to Color, and then under Theme Colors click Teal, Accent 3, Darker 25% (fifth row, seventh option from the left).Select the second first-level rectangle. Under SmartArtTools, on the Format tab, in the Shape Styles group, click the arrow next to Shape Fill, point to Gradient, and then click More Gradients. In the Format Shape dialog box, in the left pane, click Fill, select Gradient fill in the Fill pane, and then do the following:In the Type list, select Linear.Click the button next to Direction, and then click Linear Up (second row, second option from the left).Under Gradient stops, click Add or Remove until two stops appear in the drop-down list.Also under Gradient stops, customize the gradient stops as follows:Select Stop 1 from the list, and then do the following:In the Stop position box, enter 0%.Click the button next to Color, and then under Theme Colors click Brown, Accent 4, Darker 50% (sixth row, eighth option from the left).Select Stop 2 from the list, and then do the following: In the Stop position box, enter 100%.Click the button next to Color, and then under Theme Colors click Brown, Accent 4, Darker 25% (fifth row, eighth option from the left).Select the third first-level rectangle. Under SmartArtTools, on the Format tab, in the Shape Styles group, click the arrow next to Shape Fill, point to Gradient, and then click More Gradients. In the Format Shape dialog box, in the left pane, click Fill, select Gradient fill in the Fill pane, and then do the following:In the Type list, select Linear.Click the button next to Direction, and then click Linear Up (second row, second option from the left).Under Gradient stops, click Add or Remove until two stops appear in the drop-down list.Also under Gradient stops, customize the gradient stops as follows:Select Stop 1 from the list, and then do the following:In the Stop position box, enter 0%.Click the button next to Color, and then under Theme Colors click Green, Accent 5, Darker 50% (sixth row, ninth option from the left).Select Stop 2 from the list, and then do the following: In the Stop position box, enter 100%.Click the button next to Color, and then under Theme Colors click Green, Accent 5, Darker 25% (fifth row, ninth option from the left).Select the fourth first-level rectangle. Under SmartArtTools, on the Format tab, in the Shape Styles group, click the arrow next to Shape Fill, point to Gradient, and then click More Gradients. In the Format Shape dialog box, in the left pane, click Fill, select Gradient fill in the Fill pane, and then do the following:In the Type list, select Linear.Click the button next to Direction, and then click Linear Up (second row, second option from the left).Under Gradient stops, click Add or Remove until two stops appear in the drop-down list.Also under Gradient stops, customize the gradient stops as follows:Select Stop 1 from the list, and then do the following:In the Stop position box, enter 0%.Click the button next to Color, and then under Theme Colors click Orange, Accent 6, Darker 50% (sixth row, 10th option from the left).Select Stop 2 from the list, and then do the following: In the Stop position box, enter 100%.Click the button next to Color, and then under Theme Colors click Orange, Accent 6, Darker 20% (fifth row, 10th option from the left).To reproduce the animation effects on this slide, do the following:On the Animations tab, in the Animations group, click CustomAnimation.On the slide, select the graphic. In the CustomAnimation task pane, do the following:Click Add Effect, point to Entrance, and then click MoreEffects. In the Add Entrance Effect dialog box, under Subtle, click Expand.Under Modify: Expand, in the Speed list, select Fast.Also in the CustomAnimation task pane, select the animation effect. Click the arrow to the right of the animation effect, and then click EffectOptions. In the Expand dialog box, on the SmartArtAnimation tab, in the Group graphic list, select One by one.Also in the Custom Animation task pane, click the double arrow under the animation effect to expand the contents of the list of effects, and then do the following:Press and hold CTRL, and then select all of the animation effects. Under Modify: Expand, in the Start list, select With Previous.Press and hold CTRL, and then select the second, fourth, sixth and eighth animation effects (expand effects for the larger, second-level rectangles). Click Change, point to Entrance, and then click MoreEffects. In the Change Entrance Effect dialog box, under Moderate, click Compress. Press and hold CTRL, and then select the third, fifth, and seventh animation effects. Under Modify: Expand, in the Start list, select On Click.To reproduce the background effects on this slide, do the following:Right-click the slide background area, and then click Format Background. In the Format Background dialog box, click Fill in the left pane, select Gradient fill in the Fill pane, and then do the following:In the Type list, select Linear.Click the button next to Direction, and then click Linear Down (first row, second option from the left).Under Gradient stops, click Add or Remove until two stops appear in the drop-down list.Also under Gradient stops, customize the gradient stops that you added as follows:Select Stop 1 from the list, and then do the following:In the Stop position box, enter 63%.Click the button next to Color, and then under Theme Colors click Black, Text 1 (first row, second option from the left).Select Stop 2 from the list, and then do the following: In the Stop position box, enter 100%.Click the button next to Color, and then under Theme Colors clickBlack, Text 1, Lighter 50% (second row, second option from the left).