1. CURRICULUM VITAE
ANEES AHAMMED.A
QA/QC ENGINEER
aneesaec@gmail.com
+974-30863638 - Qatar
CAREER OBJECTIVE
To seek a challenging position as Mechanical Engineer with an organization that has the
vision and potentials for development, growth and expansion and at the same time
maintain a high standard of performance and business ethics.
EDUCATIONAL QUALIFICATION
COURSE SPECIALIZATION INSTITUTE
Bachelor Of Engineering Mechanical Visvesvaraya Technological University
KEY RESPONSIBILITY AND ACHIEVEMENT
Overall quality control project responsibilities such as interaction and co-ordination with
clients.
Familiar with codes and standards AWS, ASME, ASNT, SSPC, NACE.
Workedundervariousclients likeMall Of Qatar,KCT, KEO, Qatar Petroleum, DutcoQatalum,
Al Udeied (Strategic American military Facilities), Bahadir construction.
Multidiscipline inspectorwithproficiencyinwelding,coating,materialreceiving,dimension.
Material submittal, method statement, MDS.
Prepare Quality documents to every inspection stage.
Final Inspection Report preparation.
Co-ordination with Third Party Inspection for Non destructive testing.
Conduct Welder Qualification Test.
Project Supervision, to achieve the schedule of work in time.
Qualifying welding as per Structural Welding code-steel.
Repair reducing activities & Problem solving and maintaining quality and welding
documents.
Carrying out at shops/stores, Inward, In process & Final Inspection.
Preparing daily production log by each process.
Co-odinating with logistics for the preparation of delivery note.
Woked with Estimation dept will be an additional experience.
2. PROFESSIONAL EXPERIENCE
QA/ QC Engineer
M/s. Ramco Trading & Contracting Co. WLL, Qatar.
(Dec 2014 – Till date)
Job Responsibilty :-
Overall quality contol includes Fabrication, Welding, Painting, Material Receiving.
Assisting Senior QA/QC Engineer for Method Statement, ITP, Material Submital.
Preparing MDS for whole projects and ensuring quality.
Ensuring quality of materials received as per material certificates.
Witnessing all inspection done by third party and recording .
Dimensional inspection prior to welding.
Ensuring quality welding as per AWS D1.1 and Painting as per SSPC PA2.
Prepared MIR,Dimensinal, Welding and Painting report daily as per the project.
Maintaining temperature log for painting and welding.
Preparation for internal audit as per ISO 9001:2008 & Project spec and follow up to close
audit observations & NCR’S.
Conducting welders’ qualification test and training programs through execution of the
welding plan.
Prepare new WPS,PQR & WQT for projects as per client requirements.
Auditing of the approved Third Party NDT Inspection Company
Reviewing the inspection and testing methods and procedures for Radiographic, Dye
Penetrant,Magnetic Particle and Ultrasonic inspections
Frequent site visit to ensure the quality of the product.
Coordination with the Site engineers for all welding procedure specifications and
procedures qualifications report
Recording and listing of defective welds
Review cause and effects of welding defects and take remedial actions
Handled projects –
1. Hotel Skylight for Mall Of Qatar (300 tonnes)
2. Canopies & Steel Bridge for Mall Of Qatar (1300 tonnes)
3. Structural Truss for Qatar University (200 tonnes)
4. Lexus Showroom Steel Building (900 tonnes)
5. Milaha Logitic city ware house (3200 tonnes)
6. Palestine School Skylight (60 tonnes)
7. Al Okar 6 floors Office Building (480 tonnes)
8. High Wash labour camp. (350 tonnes)
9. Club House (400 tonnes)
10. Pearl Qatar- Viva Bahariah (350 tones)
Earned confidence by handling 3 projects at a time.
3. Jr.QC Engineer
M/s. BSI Steel WLL, Doha, QATAR.
(Oct 2013 – Nov 2014)
Job Responsibilities :-
Reviewof ITP (inspectionTestplan),comment on hold points, witness points and monitors
points and NDT plan.
Checking dimensions of fabricated material prior to welding as per the approved shop
drawing.
Witness,monitorandco-ordinate NDTUT,MPI and ensure thatall NDT activitiescompleted
and accepted before covering weld area.
Perform welder/welding operator performance and monitor welding procedure
qualification.
Checking and recording equipments stock availability and co-ordinating with ware-house
department.
Responsible for receive project incoming materials, Review mill certification, match with
heat no, purchase order and confirm the transfer of heat numbers before cutting and
maintain full material traceability.
Preparing the inspection reports as per the project specification and tolerance.
Preparing dossier for finished projects.
Witnesspre-construction&commissioningactivitiesrelatedtothe disciplineandensure full
compliance with project requirements.
Jr. Mechanical Engineer
M/s. SHACHI ENGINEERING PVT LTD, INDIA.
(Jan 2011- Aug 2013).
Erection and Commissioning of Spray dryer in Chemical plant at for
M/s. GUJARAT FLUROCHEMICAL LTD:- Gujarat, India
M/s. GUJARAT ALKALIES AND CHEMICALS LTD:- Gujarat, India
Career Profile:
Projectschedulingandplanning,technical knowledge of the executionproblems,sortingout
various technical and administrative problems during execution and assembling.
Maintaining QMS (quality management system), material receipt according to BOM.
Reporting any deviations to concern manager.
Quality inspection, includes material inspection, NDT(ASNT level2) inspections.
Witnessing of Fire Fighting & Fire Alarm System execution.
Conducting daily production meeting with the team for achieving the committed delivery
dates with high quality.
Making daily production schedule and reports as to monitor the progress of work.
Coordinating with the clients regarding the design so as to simplify job.
4. ADDITIONAL CERTIFICATION & SOFTWARE SKILLS
NDT Level II Certificate in (ASNT Level2):
RT (Radiographic Test)
UT (Ultrasonic Test)
MT (Magnetic Particle Test)
PT (Penetrate Test)
Piping
Diploma in HVAC
Auto Cad
MS Office
STRENGTHS
Good Communication skills as well as interpersonal skills.
Positive Attitude and logical thinking.
Hard working.
Complex problem solving.
Technical problems solving guidance.
Work well in diverse team environment.
PERSONAL INFORMATION
Date of Birth : 14-08-1988.
Nationality : Indian.
Languages : English, Malayalam, Hindi, Urdu, Tamil.
Marital Status : Married.
Holder of Qatar Driving License.
Passport Details
Passport No : K3299029
Date of issue : 26/04/2012
Date of Expiry : 25/04/2022
Skype ID : anees.ahmed128
Declaration
I herebydeclare thatall the informationmentionedaboveis true to the best of my knowledge. I
will make it my earnest endeavour to discharge competently and carefully the duties you may be
pleased to entrust with me.
Sincerely,
ANEES AHAMMED.A