3D Laser Scanning in Action - There Is More to This Than Meets the Eye
•
0 likes•11,173 views
3D laser scanning is a relatively new surveying technology that encompasses unprecedented capabilities. In this presentation Erik Birzulis, Managing Director of Landair Surveys, a leading surveying company in Australia, shares their experience, process and challenges that come with the new technology.
Report
Share
Report
Share
Download to read offline
Recommended
Poster fyp
The document proposes a room monitoring system using IoT that consists of sensors installed in different room locations to monitor movements and appliance activities. The system includes a server controller to collect data from the sensors. Administrators can monitor the system controller and manage collected data, while students and staff can view the system data. The project aims to analyze current monitoring problems, design a proposed solution, and develop the room monitoring system using IoT and cloud technologies to send data notifications.
Demolition, Deformation, and Demarcation: Scanning to Enable Design and Const...
This presentation will illustrate through real life examples how the Faro laser scanner was used to enable accurate documentation and fast tracking of construction though a better understanding of the physical state of existing
conditions. Discussed will be methods of data acquisition in often adverse or cluttered site conditions, scanning in high traffic public areas and active construction sites. A variety of deliverables will be shown: 3D models, 2D drawings, topographic surface mappings, even direct use of printed scalable scan data sections.
An Introduction to Laser Scanning - Part 3: Mobile mapping and accuracy chall...
What is 3D mobile laser mapping and how does it work? What considerations need to be made when looking at the accuracy of a mobile mapping system?
This presentation talks about mobile mapping systems and accuracy. If the accuracy of the data you want to capture is important to you, what do you need to look out for or ask about?
If you would like more information about mobile mapping systems please get in touch - info@3dlasermapping.com or go to our website www.3dlasermapping.com/streetmapper
An Introduction to Laser Scanning - Part 2: Airborne LiDAR, the basics of tra...
What type of scanners do Airborne laser scanning systems use? How do they work and why? This presentation covers the basics of Airborne Laser Scanning and some important things to consider if looking at this technology.
If you would like more information on this technology or you are looking for a system yourself? Please get in touch - www.3dlasermapping.com / info@3dlasermapping.com
3D Laser Mapping: What can you use 3d laser scanning for?
There are many applications and uses of 3D Laser scanning (also known as 3D Laser Mapping or LiDAR) - Dr Chris Cox and Liene Starka guide you through the many ways you can use this versatile technology.
If you want to know something that isn't included here, please get in touch - info@3dlasermapping.com and we would be more than happy to help.
An Introduction to Laser Scanning - Part 1: How does it all work?
How does laser scanning work? Explore the ins and outs of laser scanning or LiDAR as it is commonly known.
If you would like to find out more - please drop us a line at info@3dlasermapping.com or have a look at our website www.3dlasermapping.com
ADF 3D Laser Scanning
ADF 3D laser scanning generates in-depth point cloud data that can be used to create accurate 3D models and as-built drawings in even the most challenging facilities. Our 3D laser scanning services take site documentation to new levels of accuracy and precision with greater efficiency than ever before. We can obtain more data faster at lower costs, and with less risk to personnel and products—even in complex or hazardous environments.
FARO Laser Scanner Focus
The FARO Laser Scanner Focus is an advanced 3D surveying system that captures three dimensional
measurements, quickly and accurately.
Recommended
Poster fyp
The document proposes a room monitoring system using IoT that consists of sensors installed in different room locations to monitor movements and appliance activities. The system includes a server controller to collect data from the sensors. Administrators can monitor the system controller and manage collected data, while students and staff can view the system data. The project aims to analyze current monitoring problems, design a proposed solution, and develop the room monitoring system using IoT and cloud technologies to send data notifications.
Demolition, Deformation, and Demarcation: Scanning to Enable Design and Const...
This presentation will illustrate through real life examples how the Faro laser scanner was used to enable accurate documentation and fast tracking of construction though a better understanding of the physical state of existing
conditions. Discussed will be methods of data acquisition in often adverse or cluttered site conditions, scanning in high traffic public areas and active construction sites. A variety of deliverables will be shown: 3D models, 2D drawings, topographic surface mappings, even direct use of printed scalable scan data sections.
An Introduction to Laser Scanning - Part 3: Mobile mapping and accuracy chall...
What is 3D mobile laser mapping and how does it work? What considerations need to be made when looking at the accuracy of a mobile mapping system?
This presentation talks about mobile mapping systems and accuracy. If the accuracy of the data you want to capture is important to you, what do you need to look out for or ask about?
If you would like more information about mobile mapping systems please get in touch - info@3dlasermapping.com or go to our website www.3dlasermapping.com/streetmapper
An Introduction to Laser Scanning - Part 2: Airborne LiDAR, the basics of tra...
What type of scanners do Airborne laser scanning systems use? How do they work and why? This presentation covers the basics of Airborne Laser Scanning and some important things to consider if looking at this technology.
If you would like more information on this technology or you are looking for a system yourself? Please get in touch - www.3dlasermapping.com / info@3dlasermapping.com
3D Laser Mapping: What can you use 3d laser scanning for?
There are many applications and uses of 3D Laser scanning (also known as 3D Laser Mapping or LiDAR) - Dr Chris Cox and Liene Starka guide you through the many ways you can use this versatile technology.
If you want to know something that isn't included here, please get in touch - info@3dlasermapping.com and we would be more than happy to help.
An Introduction to Laser Scanning - Part 1: How does it all work?
How does laser scanning work? Explore the ins and outs of laser scanning or LiDAR as it is commonly known.
If you would like to find out more - please drop us a line at info@3dlasermapping.com or have a look at our website www.3dlasermapping.com
ADF 3D Laser Scanning
ADF 3D laser scanning generates in-depth point cloud data that can be used to create accurate 3D models and as-built drawings in even the most challenging facilities. Our 3D laser scanning services take site documentation to new levels of accuracy and precision with greater efficiency than ever before. We can obtain more data faster at lower costs, and with less risk to personnel and products—even in complex or hazardous environments.
FARO Laser Scanner Focus
The FARO Laser Scanner Focus is an advanced 3D surveying system that captures three dimensional
measurements, quickly and accurately.
PMI 3D Laser Scanning (As Built) Services
Production Modeling India provides 3D laser scanning services to capture accurate as-built models of facilities. They have over 100 completed projects for leading companies. Laser scanning allows fast and accurate data capture without disrupting work, and provides a shared model to reduce costs. Scans are converted to CAD and point cloud formats for visualization, layouts, and feasibility studies. The company uses FARO laser scanners with 4mm accuracy over 50m and Autodesk software for modeling. Scanning benefits include accurate as-built models, layout engineering, and feasibility studies for modifications.
3D Scanner Case Study Verhaert
The document discusses the development of a 3D scanner by Verhaert. It describes how the innovation was initiated by Burke E. Porter Company to gain a competitive advantage. Verhaert led a multidisciplinary team over 3 years to develop the scanner, taking a risk-controlled approach with stages including concept design, prototyping, and testing. The development process addressed challenges like optical aberrations, noise filtering, and processing complexity.
Application of terrestrial 3D laser scanning in building information modellin...
The document discusses the application of terrestrial 3D laser scanning and building information modeling (BIM) technology in the construction industry. It analyzes the working principles and methods of laser scanning, including static and kinematic scanning. It also discusses how laser scanning and BIM can minimize limitations through techniques like noise filtering, image matching, and automated recognition of 3D models. Beneficial outcomes of the technologies include sharing scanning data, predicting trends, and identifying unstable structures through colorization. The document concludes the technologies can dramatically reduce resources and costs compared to traditional methods.
laser scanning
This document discusses 3D laser scanning and modeling services. It provides information on how the services work, including capturing 3D data on site with laser scanners, processing the data to create 3D models, and delivering models, drawings, and point clouds to clients. The benefits highlighted are producing accurate, detailed 3D representations of complex structures quickly and from a distance without multiple site visits. Outsourcing these services provides flexibility, fast turnaround, and helps streamline workflows without large capital investments. Examples of laser scanned models, drawings, and point clouds are also included.
Di 100 flyer
The DI-100 LT/XL inspection system can visually inspect vials, ampoules, syringes and cartridges at speeds up to 150 pieces per minute. It handles a wide range of container types and sizes from 1ml to 1000ml. Using one machine provides the same productivity as 4-5 manual inspectors. The machine inspects for particles, fill levels, cracks, scratches and other defects for different container types.
Direct Dimensions: 3D Laser Scanning for Digital Modeling and Documentation
Direct Dimensions is a company founded in 1995 that provides 3D laser scanning services. They have 25 employees and have completed over 5,000 projects for clients in industries like aerospace, automotive, medical, and architecture. Their technicians have experience scanning in various environments at scales from microns to meters with a variety of equipment. They offer services including laser scanning, digital modeling, inspection/analysis, and training.
Scanner 3D e Reverse Engineering
Come funziona uno scanner, che tecnologie esistono. Come fare scansioni con progetti open-source e non. Uso della Kinect. Meshlab, Meshmixer e netfabb
Building a DIY 3D Scanner
The document discusses the author's attempts at building a DIY 3D scanner using a laser and camera. The author wants to combine a 3D scanner with a 3D printer to create physical replicas of objects, and sees potential for remixing physical objects similar to how digital media like video and music are remixed. The author details their first two attempts which used math and a Canon camera modified with CHDK software, and their third attempt which used a laser cut design created in LibreCad and built in OpenSCAD. The author concludes that building a 3D scanner this way is easy, though their process was more complicated than necessary, and that the technology has future potential and is fun to work on.
3D scanner using kinect
This document discusses using the Kinect for 3D scanning. It begins with an introduction to 3D scanning and its importance. It then discusses the Kinect hardware and software tools used, including Point Cloud Library (PCL) and drivers. The implementation section explains the process of reading depth data, filtering, downsampling, plane removal, registration and outputting the final point cloud. Key steps include depth filtering, downsampling, plane removal, registration of multiple scans and using Geomagic software for refinement. The Kinect is used to capture 3D data which is then processed using PCL for applications such as animation, games and industrial use.
MEMS Laser Scanning, the platform for next generation of 3D Depth Sensors
MicroVision's PicoP® scanning technology is a MEMS-based Laser Beam Scanning (LBS) solution for pico projection, heads-up-display, and augmented reality eyewear applications. The same flexible technology can also be applied to exciting new sensing applications, such as 3D depth sensing. Demand for small and low cost 3D depth sensing solutions is growing rapidly, driven by increasing demand for new Natural User Interface, Machine Vision, Robotic Navigation, Metrology, and Advanced Driver Assistance System (ADAS) solutions.
This presentation, prepared by MicroVision's Jari Honkanen and presented at the MEMS & Sensors Industry Group Conference Asia 2016, compares the existing 3D depth sensor solutions based on stereo cameras, structured light and 3D CMOS Cameras.
MicroVision then presents a new MEMS LBS depth sensor platform solution that can enable a new generation of tiny 3D depth sensors with capabilities such as dynamic variable resolution and variable acquisition speed. These dynamic LBS depth sensors are an enabling technology for a completely new set of innovative products and applications.
DDI SPAR FSM 2009 Forensics Presentation
This is a PowerPoint presentation entitled "Forensics Application for Close-range (sub-millimeter) 3D Laser Scanning". This presentation was given at the SPAR FSM Conference in Denver, CO, USA on April 1, 2009.
Build Your Own 3D Scanner: Introduction
Build Your Own 3D Scanner:
Introduction
http://mesh.brown.edu/byo3d/
SIGGRAPH 2009 Courses
Douglas Lanman and Gabriel Taubin
This course provides a beginner with the necessary mathematics, software, and practical details to leverage projector-camera systems in their own 3D scanning projects. An example-driven approach is used throughout; each new concept is illustrated using a practical scanner implemented with off-the-shelf parts. The course concludes by detailing how these new approaches are used in rapid prototyping, entertainment, cultural heritage, and web-based applications.
Presentation on Data science internship, credit card transaction fraud detect...
This is my internship presentation on fundamentals of data science
Mt114 mobileprojectmanagement
This document discusses mobile project management. It covers introducing mobile applications and strategy, designing a mobile application, implementing the project, and student deliverables. The agenda includes discussing challenges for businesses, studying needs, foundational concepts and mobility architecture, prototyping apps, and managing the project.
Project management at a UX focused digital agency
Most digital agencies face numerous pressures to execute high quality fast. This keynote focused on how organisations can use lean, agile, ISO9001 and UCD methods to deliver multiple innovative projects with few resources.
Secure Cloud Computing
This document discusses cloud computing, including definitions, types, uses, advantages, and challenges. Some key points:
- Cloud computing refers to delivering computing resources such as data storage, processing, and software over the internet.
- The main types of cloud computing are infrastructure as a service (IaaS), platform as a service (PaaS), and software as a service (SaaS).
- Cloud computing provides advantages like reduced costs, increased collaboration and mobility. However, security and internet connectivity dependence pose challenges.
- Uses of cloud computing include data storage, backup/recovery, software applications, testing/development, and more. It impacts many areas of everyday life.
Presentazione SCOPE by flyby
Flyby is an Italian remote sensing company that provides integrated remote sensing solutions. It has expertise in various fields including defence, security, space, environmental monitoring, and oil and gas. The document outlines Flyby's role in a project called SLOPE, which involves using remote sensing technologies like UAV data and 3D modeling for forest monitoring and harvesting planning. It then lists responsible persons from Flyby like Dr. Andrea Masini, the head of the remote sensing department, and Dr. Emilio Simeone, the managing director.
Image processing research proposal
This document outlines the requirements specification for a research project on video watermarking. The main aims of the project are to address copyright protection of digital video and develop a video watermarking scheme based on the Discrete Wavelet Transform using Matlab Simulink. The goals are to embed a watermark imperceptibly into video while making it robust against various attacks. The justification is that video faces increased attacks compared to other media. The work schedule outlines tasks from February to June 2015 including research, planning, analysis, design, coding and testing.
ETDP 2015 D2 Eye in the Sky - Fiatech
This document discusses a project using camera drones to monitor construction and operation of capital projects. It describes how current practices for data collection are time consuming and labor intensive. The project aims to develop guidelines for implementing and safely operating drones equipped with cameras and sensors to accurately collect timely data for as-built documentation, progress monitoring, quality control, and safety monitoring. The execution plan has two phases: phase 1 creates guidelines and recommendations for data collection and analytics, and phase 2 develops standards and metrics for measuring performance of data collection and analytics solutions. The project is currently recruiting additional members.
6 Things to Consider when Digitalizing a Laboratory
6 Things to consider when digitalizing a laboratory. Each section contains an actionable task list: 1) Digitalized laboratory is complex, 2) Difficult to digitalize unstructured processes, 3) Difficult to show the value of digitalization, 4) Legal implications and intellectual property, 5) Poor user adoption, 6) Data integrity.
EDE_Report_Final_14-12-22[1] (AutoRecovered).docx
The document is a business plan for a digital marketing agency. It includes an abstract, rationale, aims/benefits, course outcomes achieved, and literature review. The students' microproject aims to prepare a business plan for a digital marketing agency, identify opportunities in digital marketing, understand expectations of such a business, and prepare a financial plan. Through this project, the students learned how to prepare a business plan and financial plan for a business, identify business opportunities, and understand competition in the digital marketing industry.
More Related Content
Viewers also liked
PMI 3D Laser Scanning (As Built) Services
Production Modeling India provides 3D laser scanning services to capture accurate as-built models of facilities. They have over 100 completed projects for leading companies. Laser scanning allows fast and accurate data capture without disrupting work, and provides a shared model to reduce costs. Scans are converted to CAD and point cloud formats for visualization, layouts, and feasibility studies. The company uses FARO laser scanners with 4mm accuracy over 50m and Autodesk software for modeling. Scanning benefits include accurate as-built models, layout engineering, and feasibility studies for modifications.
3D Scanner Case Study Verhaert
The document discusses the development of a 3D scanner by Verhaert. It describes how the innovation was initiated by Burke E. Porter Company to gain a competitive advantage. Verhaert led a multidisciplinary team over 3 years to develop the scanner, taking a risk-controlled approach with stages including concept design, prototyping, and testing. The development process addressed challenges like optical aberrations, noise filtering, and processing complexity.
Application of terrestrial 3D laser scanning in building information modellin...
The document discusses the application of terrestrial 3D laser scanning and building information modeling (BIM) technology in the construction industry. It analyzes the working principles and methods of laser scanning, including static and kinematic scanning. It also discusses how laser scanning and BIM can minimize limitations through techniques like noise filtering, image matching, and automated recognition of 3D models. Beneficial outcomes of the technologies include sharing scanning data, predicting trends, and identifying unstable structures through colorization. The document concludes the technologies can dramatically reduce resources and costs compared to traditional methods.
laser scanning
This document discusses 3D laser scanning and modeling services. It provides information on how the services work, including capturing 3D data on site with laser scanners, processing the data to create 3D models, and delivering models, drawings, and point clouds to clients. The benefits highlighted are producing accurate, detailed 3D representations of complex structures quickly and from a distance without multiple site visits. Outsourcing these services provides flexibility, fast turnaround, and helps streamline workflows without large capital investments. Examples of laser scanned models, drawings, and point clouds are also included.
Di 100 flyer
The DI-100 LT/XL inspection system can visually inspect vials, ampoules, syringes and cartridges at speeds up to 150 pieces per minute. It handles a wide range of container types and sizes from 1ml to 1000ml. Using one machine provides the same productivity as 4-5 manual inspectors. The machine inspects for particles, fill levels, cracks, scratches and other defects for different container types.
Direct Dimensions: 3D Laser Scanning for Digital Modeling and Documentation
Direct Dimensions is a company founded in 1995 that provides 3D laser scanning services. They have 25 employees and have completed over 5,000 projects for clients in industries like aerospace, automotive, medical, and architecture. Their technicians have experience scanning in various environments at scales from microns to meters with a variety of equipment. They offer services including laser scanning, digital modeling, inspection/analysis, and training.
Scanner 3D e Reverse Engineering
Come funziona uno scanner, che tecnologie esistono. Come fare scansioni con progetti open-source e non. Uso della Kinect. Meshlab, Meshmixer e netfabb
Building a DIY 3D Scanner
The document discusses the author's attempts at building a DIY 3D scanner using a laser and camera. The author wants to combine a 3D scanner with a 3D printer to create physical replicas of objects, and sees potential for remixing physical objects similar to how digital media like video and music are remixed. The author details their first two attempts which used math and a Canon camera modified with CHDK software, and their third attempt which used a laser cut design created in LibreCad and built in OpenSCAD. The author concludes that building a 3D scanner this way is easy, though their process was more complicated than necessary, and that the technology has future potential and is fun to work on.
3D scanner using kinect
This document discusses using the Kinect for 3D scanning. It begins with an introduction to 3D scanning and its importance. It then discusses the Kinect hardware and software tools used, including Point Cloud Library (PCL) and drivers. The implementation section explains the process of reading depth data, filtering, downsampling, plane removal, registration and outputting the final point cloud. Key steps include depth filtering, downsampling, plane removal, registration of multiple scans and using Geomagic software for refinement. The Kinect is used to capture 3D data which is then processed using PCL for applications such as animation, games and industrial use.
MEMS Laser Scanning, the platform for next generation of 3D Depth Sensors
MicroVision's PicoP® scanning technology is a MEMS-based Laser Beam Scanning (LBS) solution for pico projection, heads-up-display, and augmented reality eyewear applications. The same flexible technology can also be applied to exciting new sensing applications, such as 3D depth sensing. Demand for small and low cost 3D depth sensing solutions is growing rapidly, driven by increasing demand for new Natural User Interface, Machine Vision, Robotic Navigation, Metrology, and Advanced Driver Assistance System (ADAS) solutions.
This presentation, prepared by MicroVision's Jari Honkanen and presented at the MEMS & Sensors Industry Group Conference Asia 2016, compares the existing 3D depth sensor solutions based on stereo cameras, structured light and 3D CMOS Cameras.
MicroVision then presents a new MEMS LBS depth sensor platform solution that can enable a new generation of tiny 3D depth sensors with capabilities such as dynamic variable resolution and variable acquisition speed. These dynamic LBS depth sensors are an enabling technology for a completely new set of innovative products and applications.
DDI SPAR FSM 2009 Forensics Presentation
This is a PowerPoint presentation entitled "Forensics Application for Close-range (sub-millimeter) 3D Laser Scanning". This presentation was given at the SPAR FSM Conference in Denver, CO, USA on April 1, 2009.
Build Your Own 3D Scanner: Introduction
Build Your Own 3D Scanner:
Introduction
http://mesh.brown.edu/byo3d/
SIGGRAPH 2009 Courses
Douglas Lanman and Gabriel Taubin
This course provides a beginner with the necessary mathematics, software, and practical details to leverage projector-camera systems in their own 3D scanning projects. An example-driven approach is used throughout; each new concept is illustrated using a practical scanner implemented with off-the-shelf parts. The course concludes by detailing how these new approaches are used in rapid prototyping, entertainment, cultural heritage, and web-based applications.
Viewers also liked (13)
Application of terrestrial 3D laser scanning in building information modellin...
Application of terrestrial 3D laser scanning in building information modellin...
Direct Dimensions: 3D Laser Scanning for Digital Modeling and Documentation
Direct Dimensions: 3D Laser Scanning for Digital Modeling and Documentation
MEMS Laser Scanning, the platform for next generation of 3D Depth Sensors
MEMS Laser Scanning, the platform for next generation of 3D Depth Sensors
Similar to 3D Laser Scanning in Action - There Is More to This Than Meets the Eye
Presentation on Data science internship, credit card transaction fraud detect...
This is my internship presentation on fundamentals of data science
Mt114 mobileprojectmanagement
This document discusses mobile project management. It covers introducing mobile applications and strategy, designing a mobile application, implementing the project, and student deliverables. The agenda includes discussing challenges for businesses, studying needs, foundational concepts and mobility architecture, prototyping apps, and managing the project.
Project management at a UX focused digital agency
Most digital agencies face numerous pressures to execute high quality fast. This keynote focused on how organisations can use lean, agile, ISO9001 and UCD methods to deliver multiple innovative projects with few resources.
Secure Cloud Computing
This document discusses cloud computing, including definitions, types, uses, advantages, and challenges. Some key points:
- Cloud computing refers to delivering computing resources such as data storage, processing, and software over the internet.
- The main types of cloud computing are infrastructure as a service (IaaS), platform as a service (PaaS), and software as a service (SaaS).
- Cloud computing provides advantages like reduced costs, increased collaboration and mobility. However, security and internet connectivity dependence pose challenges.
- Uses of cloud computing include data storage, backup/recovery, software applications, testing/development, and more. It impacts many areas of everyday life.
Presentazione SCOPE by flyby
Flyby is an Italian remote sensing company that provides integrated remote sensing solutions. It has expertise in various fields including defence, security, space, environmental monitoring, and oil and gas. The document outlines Flyby's role in a project called SLOPE, which involves using remote sensing technologies like UAV data and 3D modeling for forest monitoring and harvesting planning. It then lists responsible persons from Flyby like Dr. Andrea Masini, the head of the remote sensing department, and Dr. Emilio Simeone, the managing director.
Image processing research proposal
This document outlines the requirements specification for a research project on video watermarking. The main aims of the project are to address copyright protection of digital video and develop a video watermarking scheme based on the Discrete Wavelet Transform using Matlab Simulink. The goals are to embed a watermark imperceptibly into video while making it robust against various attacks. The justification is that video faces increased attacks compared to other media. The work schedule outlines tasks from February to June 2015 including research, planning, analysis, design, coding and testing.
ETDP 2015 D2 Eye in the Sky - Fiatech
This document discusses a project using camera drones to monitor construction and operation of capital projects. It describes how current practices for data collection are time consuming and labor intensive. The project aims to develop guidelines for implementing and safely operating drones equipped with cameras and sensors to accurately collect timely data for as-built documentation, progress monitoring, quality control, and safety monitoring. The execution plan has two phases: phase 1 creates guidelines and recommendations for data collection and analytics, and phase 2 develops standards and metrics for measuring performance of data collection and analytics solutions. The project is currently recruiting additional members.
6 Things to Consider when Digitalizing a Laboratory
6 Things to consider when digitalizing a laboratory. Each section contains an actionable task list: 1) Digitalized laboratory is complex, 2) Difficult to digitalize unstructured processes, 3) Difficult to show the value of digitalization, 4) Legal implications and intellectual property, 5) Poor user adoption, 6) Data integrity.
EDE_Report_Final_14-12-22[1] (AutoRecovered).docx
The document is a business plan for a digital marketing agency. It includes an abstract, rationale, aims/benefits, course outcomes achieved, and literature review. The students' microproject aims to prepare a business plan for a digital marketing agency, identify opportunities in digital marketing, understand expectations of such a business, and prepare a financial plan. Through this project, the students learned how to prepare a business plan and financial plan for a business, identify business opportunities, and understand competition in the digital marketing industry.
VDM Reprot By Nikhil Jaiswal
This document describes a vendor document management system implemented at Engineers India Limited. It includes sections on the organization, introduction to the system, features, requirements, and operation details. The system allows vendors to manage documents online through a web interface. It aims to streamline the document exchange process between EIL and its vendors. The document also discusses implementation using Spring Framework and testing security using SSL and Wireshark. It concludes with potential areas for improvement and a bibliography.
Using Existing Technology to be More Productive in Construction
Construction Technology Tech Tips. Bridgit's Co-founder, Lauren Hasegawa looks at using Existing Technology to be More Productive in Construction.
IMC Institute's Training Schedule Q2 2014
This document provides information about training courses offered by IMC Institute from April to June 2014. It includes a summary of 4 tracks of courses offered: Emerging Technology, Service Management, IT Architecture, and Soft Skills. The document also provides details of individual courses, including descriptions, schedules, fees, instructors, prerequisites and benefits. Courses range from 1-5 days and cover topics such as Java, mobile development, cloud computing, project management and more.
Leernetwerk cloud praktoraat engels
Some slides from the presentation of how to implement Agile in Education. This example is realised in Rotterdam, The Netherlands where we started a Practoraat (Lab) Cloud Engineering. We use the method of Design Thinking and Scrum elements to support the learning process and the development of products.
ContentsTeam Work Schedule3Team Task Assignment3Project .docx
Contents
Team Work Schedule 3
Team Task Assignment 3
Project Plan 4
Step 1: Define the Problem 4
Step 2: Create a Plan 4
Step 3: Execute 4
Step 4: Check Work 6
Step 5: Learn and Generalize 6
House of Quality (HOQ) for Theia’s Smart Glasses 7
Step 1: Define the Problem 7
Step 2: Create a Plan 7
Step 3: Execute 8
Step 4: Check Work 14
Step 5: Learn and Generalize 14
Aggregate Project Plan 15
Step 1: Define the Problem 15
Step 2: Create a Plan 15
Step 3: Execute 16
Step 4: Check Work 22
Step 5: Learn and Generalize 22
I was able to use the APP skills from the midterm and apply it to our actual project. We learned that project #2 yields the highest EMV so that will be the industry we will be focusing on. 22
Theia’s Conceptual Design Process 23
Step 1: Define the Problem 23
Step 2: Create a Plan 23
Step 3: Execute 24
Concept 1 27
Concept 2 28
Concept 3 29
Concept 4 30
Concept 5 31
Concept 6 32
Step 4: Check Work 34
Step 5: Learn and Generalize 34
Phase Ⅱ Reportca 36
Step 1: Define the Problem 36
Step 2: Create a Plan 36
Step 3: Execute 36
Project Planning 36
House of Quality 37
Aggregate Project Plan 37
Reverse Engineering (includes FAST analysis + diagram) 38
Conceptual Design 38
Step 4: Check Work 38
Step 5: Learn and Generalize 39
Team Work Schedule
Date
Task
10/24
Homework assigned, touch bases with team to decide weekend plans.
10/25
Read handout and HOQ example. Everyone assigned to do individual research about AR Glasses.
10/26
Read handout and HOQ example. Everyone assigned to do individual research about AR Glasses.
10/27
Meet at a cafe downtown, due to the power outage. Meeting time is 1 hour.
10/28
Everyone working remotely. Also everyone is working on Phase I/II at the moment. HOQ problem is postponed for a while as we are working on Phase I/II.
10/29
Meet at TBD. Meeting time is 1 hour.
10/30
Revise our work.
10/31
Final revisions. Turn in homework.
Team Task Assignment
Task
Phase 1 - Missing Info + Tech Strategy
Phase 1 - Missing Functional Maps
Project Planning
House of Quality for Product
Aggregate Project Plan
Reverse Engineering
Conceptual Design
Phase II ReportProject PlanStep 1: Define the Problem
We need to clearly determine the tasks required of this project and develop a systematic plan of action to tackle these tasks.Step 2: Create a Plan
Framework for Project Planning:
1. Clearly state the intent of the Project
2. Determine the Design/Development sub-tasks and activities Comment by Christopher Chiang: Develop OS
Develop Display technology
Develop glasses framework
Audio Output
Develop Bluetooth compatibility
Battery development
Charge development
Environment sensing capability
3. Create a design/development activity matrix
4. Create a schedule for each subtask using a GANTT Chart
5. Identify the Critical Path for the Project
6. Assign Clear Roles and Responsibilities & track progressStep 3: Execute
1. Clearly state the intent of the Project
a. Develop smart glasses wearable technology prototype within a 1 year timesp.
Unlocking AI Potential: Leveraging PIA Processes for Comprehensive Impact Ass...
Artificial Intelligence (AI) has emerged as a transformative force in various industries, from healthcare to finance and beyond. While AI offers incredible opportunities, it also raises ethical, legal, and social challenges that must be addressed. To navigate this complex landscape in the world of privacy, it is crucial to conduct comprehensive Privacy Impact Assessments (PIAs).
Conducting PIAs in this dynamic and evolving world of AI has brought new challenges to the privacy world. With AI increasingly being integrated into different areas of our lives, understanding the intersection between AI and PIAs is essential for any organization to ensure they are privacy forward.
Take advantage of this opportunity to gain a comprehensive understanding of AI impact assessments and their role in shaping the future of AI. In this insightful webinar, our experts will explore the power of Privacy Impact Assessments (PIAs) in ensuring responsible AI development and deployment.
In this webinar, some key topics that will be covered include:
- Introduction to AI PIAs
- PIAs demystified (why they are essential in the context of AI)
- Explore the evolving legal and regulatory landscape governing AI and privacy, including GDPR, CCPA, and other international standards
- Best practices for conducting effective PIAs in AI projects
- Future outlooks for AI and PIAs
Challenges and Proposed Solutions for Cloud Forensic
The document discusses the challenges of cloud forensics. Some key challenges discussed are:
1) Physical inaccessibility of digital evidence stored in the cloud makes evidence collection difficult as investigators do not have direct access to cloud servers.
2) Dynamic IP addresses in the cloud make it challenging to map IP addresses for search warrants as locations cannot be precisely tracked.
3) Volatile cloud data can be lost if storage instances are shutdown, as data only exists in memory and lacks persistence. This poses issues for forensic investigation.
The document also examines limitations of current forensic tools for cloud environments and issues of trust when relying on cloud providers' employees to collect forensic data. Overall, the challenges discussed center around the lack
Software engineering
This document provides an overview of software engineering concepts including:
- The 4 P's of software development which are people, process, project, and product.
- Common software process models like waterfall, prototype, spiral, and RAD.
- Software engineering tasks like documentation, coding, implementation, and maintenance.
- Risks in software development such as technical risks, business risks, and customer risks.
IRJET- Real Time Attendance System using Face Recognition
This document describes a real-time attendance system using face recognition. The system aims to automate the attendance marking process by using image processing techniques like face detection and face recognition. It consists of five modules: image capturing, database creation, face detection, preprocessing, and face recognition and classification. Faces detected in images are compared to stored images in the database to identify students and mark their attendance automatically. This reduces time spent on manual attendance marking and helps ensure accurate attendance records.
CV of Emad Goufi FEB 2016
This CV seeks a challenging management position in CADD. The applicant has over 30 years of experience in administrative, technical, and CADD roles. Currently he is a Technical Clerk Lead-man at Saudi Aramco Mobil Refinery Co., where he also took on the duties of CADD Group Leader from 2015-2015, managing projects, documentation, and a team. He has extensive training in areas like safety, leadership, drafting, software programs, and languages.
Making Software and Software Engineering visible
This presentation highlights the impact of software engineering on society, and provides several recommendations for how to harness its increasing influence in education, business, and government.
Similar to 3D Laser Scanning in Action - There Is More to This Than Meets the Eye (20)
Presentation on Data science internship, credit card transaction fraud detect...
Presentation on Data science internship, credit card transaction fraud detect...
6 Things to Consider when Digitalizing a Laboratory
6 Things to Consider when Digitalizing a Laboratory
Using Existing Technology to be More Productive in Construction
Using Existing Technology to be More Productive in Construction
ContentsTeam Work Schedule3Team Task Assignment3Project .docx
ContentsTeam Work Schedule3Team Task Assignment3Project .docx
Unlocking AI Potential: Leveraging PIA Processes for Comprehensive Impact Ass...
Unlocking AI Potential: Leveraging PIA Processes for Comprehensive Impact Ass...
Challenges and Proposed Solutions for Cloud Forensic
Challenges and Proposed Solutions for Cloud Forensic
IRJET- Real Time Attendance System using Face Recognition
IRJET- Real Time Attendance System using Face Recognition
Recently uploaded
一比一原版(osu毕业证书)美国俄勒冈州立大学毕业证如何办理
原版一模一样【微信：741003700 】【(osu毕业证书)美国俄勒冈州立大学毕业证成绩单】【微信：741003700 】学位证，留信认证（真实可查，永久存档）原件一模一样纸张工艺/offer、雅思、外壳等材料/诚信可靠,可直接看成品样本，帮您解决无法毕业带来的各种难题！外壳，原版制作，诚信可靠，可直接看成品样本。行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备。十五年致力于帮助留学生解决难题，包您满意。
本公司拥有海外各大学样板无数，能完美还原。
1:1完美还原海外各大学毕业材料上的工艺：水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠。文字图案浮雕、激光镭射、紫外荧光、温感、复印防伪等防伪工艺。材料咨询办理、认证咨询办理请加学历顾问Q/微741003700
【主营项目】
一.毕业证【q微741003700】成绩单、使馆认证、教育部认证、雅思托福成绩单、学生卡等！
二.真实使馆公证(即留学回国人员证明,不成功不收费)
三.真实教育部学历学位认证（教育部存档！教育部留服网站永久可查）
四.办理各国各大学文凭(一对一专业服务,可全程监控跟踪进度)
如果您处于以下几种情况：
◇在校期间，因各种原因未能顺利毕业……拿不到官方毕业证【q/微741003700】
◇面对父母的压力，希望尽快拿到；
◇不清楚认证流程以及材料该如何准备；
◇回国时间很长，忘记办理；
◇回国马上就要找工作，办给用人单位看；
◇企事业单位必须要求办理的
◇需要报考公务员、购买免税车、落转户口
◇申请留学生创业基金
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
办理(osu毕业证书)美国俄勒冈州立大学毕业证【微信：741003700 】外观非常简单，由纸质材料制成，上面印有校徽、校名、毕业生姓名、专业等信息。
办理(osu毕业证书)美国俄勒冈州立大学毕业证【微信：741003700 】格式相对统一，各专业都有相应的模板。通常包括以下部分：
校徽：象征着学校的荣誉和传承。
校名:学校英文全称
授予学位：本部分将注明获得的具体学位名称。
毕业生姓名：这是最重要的信息之一，标志着该证书是由特定人员获得的。
颁发日期：这是毕业正式生效的时间，也代表着毕业生学业的结束。
其他信息：根据不同的专业和学位，可能会有一些特定的信息或章节。
办理(osu毕业证书)美国俄勒冈州立大学毕业证【微信：741003700 】价值很高，需要妥善保管。一般来说，应放置在安全、干燥、防潮的地方，避免长时间暴露在阳光下。如需使用，最好使用复印件而不是原件，以免丢失。
综上所述，办理(osu毕业证书)美国俄勒冈州立大学毕业证【微信：741003700 】是证明身份和学历的高价值文件。外观简单庄重，格式统一，包括重要的个人信息和发布日期。对持有人来说，妥善保管是非常重要的。
原版制作(Humboldt毕业证书)柏林大学毕业证学位证一模一样
原件一模一样【微信：bwp0011】《(Humboldt毕业证书)柏林大学毕业证学位证》【微信：bwp0011】学位证，留信认证（真实可查，永久存档）原件一模一样纸张工艺/offer、雅思、外壳等材料/诚信可靠,可直接看成品样本，帮您解决无法毕业带来的各种难题！外壳，原版制作，诚信可靠，可直接看成品样本。行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备。十五年致力于帮助留学生解决难题，包您满意。
本公司拥有海外各大学样板无数，能完美还原。
1:1完美还原海外各大学毕业材料上的工艺：水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠。文字图案浮雕、激光镭射、紫外荧光、温感、复印防伪等防伪工艺。材料咨询办理、认证咨询办理请加学历顾问微bwp0011
【主营项目】
一.毕业证【微bwp0011】成绩单、使馆认证、教育部认证、雅思托福成绩单、学生卡等！
二.真实使馆公证(即留学回国人员证明,不成功不收费)
三.真实教育部学历学位认证（教育部存档！教育部留服网站永久可查）
四.办理各国各大学文凭(一对一专业服务,可全程监控跟踪进度)
如果您处于以下几种情况：
◇在校期间，因各种原因未能顺利毕业……拿不到官方毕业证【微bwp0011】
◇面对父母的压力，希望尽快拿到；
◇不清楚认证流程以及材料该如何准备；
◇回国时间很长，忘记办理；
◇回国马上就要找工作，办给用人单位看；
◇企事业单位必须要求办理的
◇需要报考公务员、购买免税车、落转户口
◇申请留学生创业基金
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
2008 BUILDING CONSTRUCTION Illustrated - Ching Chapter 08 Doors and Windows.pdf
2008 BUILDING CONSTRUCTION Illustrated - Ching Chapter 08 Doors and Windows
2008 BUILDING CONSTRUCTION Illustrated - Ching Chapter 02 The Building.pdf
2008 BUILDING CONSTRUCTION Illustrated - Ching Chapter 02 The Building
Optimizing Gradle Builds - Gradle DPE Tour Berlin 2024
Sinan from the Delivery Hero mobile infrastructure engineering team shares a deep dive into performance acceleration with Gradle build cache optimizations. Sinan shares their journey into solving complex build-cache problems that affect Gradle builds. By understanding the challenges and solutions found in our journey, we aim to demonstrate the possibilities for faster builds. The case study reveals how overlapping outputs and cache misconfigurations led to significant increases in build times, especially as the project scaled up with numerous modules using Paparazzi tests. The journey from diagnosing to defeating cache issues offers invaluable lessons on maintaining cache integrity without sacrificing functionality.
Design and optimization of ion propulsion drone
Electric propulsion technology is widely used in many kinds of vehicles in recent years, and aircrafts are no exception. Technically, UAVs are electrically propelled but tend to produce a significant amount of noise and vibrations. Ion propulsion technology for drones is a potential solution to this problem. Ion propulsion technology is proven to be feasible in the earth’s atmosphere. The study presented in this article shows the design of EHD thrusters and power supply for ion propulsion drones along with performance optimization of high-voltage power supply for endurance in earth’s atmosphere.
Computational Engineering IITH Presentation
This Presentation will give you a brief idea about what Computational Engineering at IIT Hyderabad has to offer.
Redefining brain tumor segmentation: a cutting-edge convolutional neural netw...
Medical image analysis has witnessed significant advancements with deep learning techniques. In the domain of brain tumor segmentation, the ability to
precisely delineate tumor boundaries from magnetic resonance imaging (MRI)
scans holds profound implications for diagnosis. This study presents an ensemble convolutional neural network (CNN) with transfer learning, integrating
the state-of-the-art Deeplabv3+ architecture with the ResNet18 backbone. The
model is rigorously trained and evaluated, exhibiting remarkable performance
metrics, including an impressive global accuracy of 99.286%, a high-class accuracy of 82.191%, a mean intersection over union (IoU) of 79.900%, a weighted
IoU of 98.620%, and a Boundary F1 (BF) score of 83.303%. Notably, a detailed comparative analysis with existing methods showcases the superiority of
our proposed model. These findings underscore the model’s competence in precise brain tumor localization, underscoring its potential to revolutionize medical
image analysis and enhance healthcare outcomes. This research paves the way
for future exploration and optimization of advanced CNN models in medical
imaging, emphasizing addressing false positives and resource efficiency.
Electric vehicle and photovoltaic advanced roles in enhancing the financial p...
Climate change's impact on the planet forced the United Nations and governments to promote green energies and electric transportation. The deployments of photovoltaic (PV) and electric vehicle (EV) systems gained stronger momentum due to their numerous advantages over fossil fuel types. The advantages go beyond sustainability to reach financial support and stability. The work in this paper introduces the hybrid system between PV and EV to support industrial and commercial plants. This paper covers the theoretical framework of the proposed hybrid system including the required equation to complete the cost analysis when PV and EV are present. In addition, the proposed design diagram which sets the priorities and requirements of the system is presented. The proposed approach allows setup to advance their power stability, especially during power outages. The presented information supports researchers and plant owners to complete the necessary analysis while promoting the deployment of clean energy. The result of a case study that represents a dairy milk farmer supports the theoretical works and highlights its advanced benefits to existing plants. The short return on investment of the proposed approach supports the paper's novelty approach for the sustainable electrical system. In addition, the proposed system allows for an isolated power setup without the need for a transmission line which enhances the safety of the electrical network
Use PyCharm for remote debugging of WSL on a Windo cf5c162d672e4e58b4dde5d797...
This document serves as a comprehensive step-by-step guide on how to effectively use PyCharm for remote debugging of the Windows Subsystem for Linux (WSL) on a local Windows machine. It meticulously outlines several critical steps in the process, starting with the crucial task of enabling permissions, followed by the installation and configuration of WSL.
The guide then proceeds to explain how to set up the SSH service within the WSL environment, an integral part of the process. Alongside this, it also provides detailed instructions on how to modify the inbound rules of the Windows firewall to facilitate the process, ensuring that there are no connectivity issues that could potentially hinder the debugging process.
The document further emphasizes on the importance of checking the connection between the Windows and WSL environments, providing instructions on how to ensure that the connection is optimal and ready for remote debugging.
It also offers an in-depth guide on how to configure the WSL interpreter and files within the PyCharm environment. This is essential for ensuring that the debugging process is set up correctly and that the program can be run effectively within the WSL terminal.
Additionally, the document provides guidance on how to set up breakpoints for debugging, a fundamental aspect of the debugging process which allows the developer to stop the execution of their code at certain points and inspect their program at those stages.
Finally, the document concludes by providing a link to a reference blog. This blog offers additional information and guidance on configuring the remote Python interpreter in PyCharm, providing the reader with a well-rounded understanding of the process.
Generative AI Use cases applications solutions and implementation.pdf
Generative AI solutions encompass a range of capabilities from content creation to complex problem-solving across industries. Implementing generative AI involves identifying specific business needs, developing tailored AI models using techniques like GANs and VAEs, and integrating these models into existing workflows. Data quality and continuous model refinement are crucial for effective implementation. Businesses must also consider ethical implications and ensure transparency in AI decision-making. Generative AI's implementation aims to enhance efficiency, creativity, and innovation by leveraging autonomous generation and sophisticated learning algorithms to meet diverse business challenges.
https://www.leewayhertz.com/generative-ai-use-cases-and-applications/
Prediction of Electrical Energy Efficiency Using Information on Consumer's Ac...
Energy efficiency has been important since the latter part of the last century. The main object of this survey is to determine the energy efficiency knowledge among consumers. Two separate districts in Bangladesh are selected to conduct the survey on households and showrooms about the energy and seller also. The survey uses the data to find some regression equations from which it is easy to predict energy efficiency knowledge. The data is analyzed and calculated based on five important criteria. The initial target was to find some factors that help predict a person's energy efficiency knowledge. From the survey, it is found that the energy efficiency awareness among the people of our country is very low. Relationships between household energy use behaviors are estimated using a unique dataset of about 40 households and 20 showrooms in Bangladesh's Chapainawabganj and Bagerhat districts. Knowledge of energy consumption and energy efficiency technology options is found to be associated with household use of energy conservation practices. Household characteristics also influence household energy use behavior. Younger household cohorts are more likely to adopt energy-efficient technologies and energy conservation practices and place primary importance on energy saving for environmental reasons. Education also influences attitudes toward energy conservation in Bangladesh. Low-education households indicate they primarily save electricity for the environment while high-education households indicate they are motivated by environmental concerns.
LLM Fine Tuning with QLoRA Cassandra Lunch 4, presented by Anant
Slides for the 4th Presentation on LLM Fine-Tuning with QLoRA Presented by Anant, featuring DataStax Astra
Null Bangalore | Pentesters Approach to AWS IAM
#Abstract:
- Learn more about the real-world methods for auditing AWS IAM (Identity and Access Management) as a pentester. So let us proceed with a brief discussion of IAM as well as some typical misconfigurations and their potential exploits in order to reinforce the understanding of IAM security best practices.
- Gain actionable insights into AWS IAM policies and roles, using hands on approach.
#Prerequisites:
- Basic understanding of AWS services and architecture
- Familiarity with cloud security concepts
- Experience using the AWS Management Console or AWS CLI.
- For hands on lab create account on [killercoda.com](https://killercoda.com/cloudsecurity-scenario/)
# Scenario Covered:
- Basics of IAM in AWS
- Implementing IAM Policies with Least Privilege to Manage S3 Bucket
- Objective: Create an S3 bucket with least privilege IAM policy and validate access.
- Steps:
- Create S3 bucket.
- Attach least privilege policy to IAM user.
- Validate access.
- Exploiting IAM PassRole Misconfiguration
-Allows a user to pass a specific IAM role to an AWS service (ec2), typically used for service access delegation. Then exploit PassRole Misconfiguration granting unauthorized access to sensitive resources.
- Objective: Demonstrate how a PassRole misconfiguration can grant unauthorized access.
- Steps:
- Allow user to pass IAM role to EC2.
- Exploit misconfiguration for unauthorized access.
- Access sensitive resources.
- Exploiting IAM AssumeRole Misconfiguration with Overly Permissive Role
- An overly permissive IAM role configuration can lead to privilege escalation by creating a role with administrative privileges and allow a user to assume this role.
- Objective: Show how overly permissive IAM roles can lead to privilege escalation.
- Steps:
- Create role with administrative privileges.
- Allow user to assume the role.
- Perform administrative actions.
- Differentiation between PassRole vs AssumeRole
Try at [killercoda.com](https://killercoda.com/cloudsecurity-scenario/)
学校原版美国波士顿大学毕业证学历学位证书原版一模一样
原版一模一样【微信：741003700 】【美国波士顿大学毕业证学历学位证书】【微信：741003700 】学位证，留信认证（真实可查，永久存档）offer、雅思、外壳等材料/诚信可靠,可直接看成品样本，帮您解决无法毕业带来的各种难题！外壳，原版制作，诚信可靠，可直接看成品样本。行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备。十五年致力于帮助留学生解决难题，包您满意。
本公司拥有海外各大学样板无数，能完美还原海外各大学 Bachelor Diploma degree, Master Degree Diploma
1:1完美还原海外各大学毕业材料上的工艺：水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠。文字图案浮雕、激光镭射、紫外荧光、温感、复印防伪等防伪工艺。材料咨询办理、认证咨询办理请加学历顾问Q/微741003700
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
Recently uploaded (20)
2008 BUILDING CONSTRUCTION Illustrated - Ching Chapter 08 Doors and Windows.pdf
2008 BUILDING CONSTRUCTION Illustrated - Ching Chapter 08 Doors and Windows.pdf
2008 BUILDING CONSTRUCTION Illustrated - Ching Chapter 02 The Building.pdf
2008 BUILDING CONSTRUCTION Illustrated - Ching Chapter 02 The Building.pdf
1FIDIC-CONSTRUCTION-CONTRACT-2ND-ED-2017-RED-BOOK.pdf
1FIDIC-CONSTRUCTION-CONTRACT-2ND-ED-2017-RED-BOOK.pdf
Optimizing Gradle Builds - Gradle DPE Tour Berlin 2024
Optimizing Gradle Builds - Gradle DPE Tour Berlin 2024
Redefining brain tumor segmentation: a cutting-edge convolutional neural netw...
Redefining brain tumor segmentation: a cutting-edge convolutional neural netw...
Electric vehicle and photovoltaic advanced roles in enhancing the financial p...
Electric vehicle and photovoltaic advanced roles in enhancing the financial p...
Use PyCharm for remote debugging of WSL on a Windo cf5c162d672e4e58b4dde5d797...
Use PyCharm for remote debugging of WSL on a Windo cf5c162d672e4e58b4dde5d797...
Generative AI Use cases applications solutions and implementation.pdf
Generative AI Use cases applications solutions and implementation.pdf
Prediction of Electrical Energy Efficiency Using Information on Consumer's Ac...
Prediction of Electrical Energy Efficiency Using Information on Consumer's Ac...
LLM Fine Tuning with QLoRA Cassandra Lunch 4, presented by Anant
LLM Fine Tuning with QLoRA Cassandra Lunch 4, presented by Anant
3D Laser Scanning in Action - There Is More to This Than Meets the Eye
- 1. 3D Laser Scanning in Action There Is More to This Than Meets the Eye SSSI Seminar 30 April 2014 Presented by Erik Birzulis
- 2. Agenda 0. The Basics I. Our Process II. Our Clients III.The Challenges
- 7. I. Process 4.Setting up targets and scanning
- 8. I. Process 5.Download and registering 6.Georeferencing
- 9. I. Process 7.Cleaning point cloud
- 10. I. Process 8.Vectorizing to level of detail
- 11. I. Process 9.Forward to client
- 12. I. Process 10.Help client use the data
- 17. II. Our Clients 3.Engineers,plant rebuilds
- 18. III. The Challenges 1.Educate client
- 19. III. The Challenges 2.Find work
- 20. III. The Challenges 3.Software and hardware [and learning how to use it]
- 21. III. The Challenges 4.Size of files
- 24. WEB landair.com.au PHONE 1300 130 158 EMAIL erik@landair.com.au Erik Birzulis Managing Director
- 25. Land, Engineering and Aerial Surveying Services