This is a presentation from a series related to course LA181 named "Introduction to Environmental Design", Faculty of Environmental Design, King Abdulaziz University.
Local policies and strategies designed to deal with urban decline, decay or transformation are termed as urban renewal.
It is a comprehensive and integrated vision and action which leads to the resolution of urban problems and which seeks to bring about a lasting improvement in the economic, physical, social and environmental conditions of an area that has been subject to change’
With the decision and authority of a governing municipality, rearranging land use, function and ownership features of a socially, economically or structurally decayed part of a certain city .
such as slum zones or brown fields, for the purpose of obtaining a desired, well organized neighbourhood.
Definition of Zoning,Land use planning,Urban planning,Urban and regional planning,Regional planning,Zones,Zone planning,Land use planning in india,objectives of land use planning,objectives of zone planning
- The document discusses the importance of preserving open spaces and vegetation in urban planning to balance environmental, social and economic needs. It notes trees and vegetation provide aesthetic, climatic and engineering benefits.
- It outlines various values and benefits of trees related to architecture, climate, site development and engineering like moderating temperatures, intercepting rainfall, stabilizing soils and reducing pollution. Trees also have economic and legal value by enhancing property values.
- Jurisdictions have enacted preservation ordinances to balance development with resource protection. Successful preservation must integrate into early planning stages rather than be retrofitted later. Proper protection of trees during construction is also important to prevent root damage.
1. The document describes the rational planning method which involves understanding existing conditions, exploring alternatives, and deciding on a preferred alternative.
2. The understanding phase involves preparing maps and materials, gathering data through meetings and site measurements, and analyzing this information to identify strengths, weaknesses, and other insights.
3. In the exploring phase, ideas are brainstormed and preliminary principles and design alternatives are developed based on the understanding phase.
4. The deciding phase is where a preferred alternative is selected and final presentation materials are prepared based on what was learned throughout the process.
KKKH4284 URBAN PLANNING OF SUSTAINABLE DEVELOPMENT
TASK 7 : URBAN RENEWAL
LECTURERS :
PROF. IR. DR. RIZA ATIQ ABDULLAH O.K. RAHMAT
DR. NAZRI BORHAN
DR. NORLIZA MOHD AKHIR
The document outlines the settlement planning process which involves 5 main steps:
1. Identifying a suitable area and assessing existing conditions
2. Declaring the area a planning area through public hearings and approval
3. Evaluating existing property interests like trees, crops, and buildings
4. Compensating landowners according to acquisition acts
5. Developing a general planning scheme to coordinate sustainable development
The process aims to properly plan urban development through public participation and compensation of existing land uses.
This document discusses three concepts related to planning theory: compact cities, public participation, and rationality. Compact cities are high-density urban developments built in balance with the natural environment that have clear boundaries and a mix of uses. Public participation involves engaging stakeholders and citizens affected by decisions. Rationality means acting based on facts and reality to avoid unwanted consequences, and there are different types of rationality like instrumental, incremental, and bounded rationality.
Local policies and strategies designed to deal with urban decline, decay or transformation are termed as urban renewal.
It is a comprehensive and integrated vision and action which leads to the resolution of urban problems and which seeks to bring about a lasting improvement in the economic, physical, social and environmental conditions of an area that has been subject to change’
With the decision and authority of a governing municipality, rearranging land use, function and ownership features of a socially, economically or structurally decayed part of a certain city .
such as slum zones or brown fields, for the purpose of obtaining a desired, well organized neighbourhood.
Definition of Zoning,Land use planning,Urban planning,Urban and regional planning,Regional planning,Zones,Zone planning,Land use planning in india,objectives of land use planning,objectives of zone planning
- The document discusses the importance of preserving open spaces and vegetation in urban planning to balance environmental, social and economic needs. It notes trees and vegetation provide aesthetic, climatic and engineering benefits.
- It outlines various values and benefits of trees related to architecture, climate, site development and engineering like moderating temperatures, intercepting rainfall, stabilizing soils and reducing pollution. Trees also have economic and legal value by enhancing property values.
- Jurisdictions have enacted preservation ordinances to balance development with resource protection. Successful preservation must integrate into early planning stages rather than be retrofitted later. Proper protection of trees during construction is also important to prevent root damage.
1. The document describes the rational planning method which involves understanding existing conditions, exploring alternatives, and deciding on a preferred alternative.
2. The understanding phase involves preparing maps and materials, gathering data through meetings and site measurements, and analyzing this information to identify strengths, weaknesses, and other insights.
3. In the exploring phase, ideas are brainstormed and preliminary principles and design alternatives are developed based on the understanding phase.
4. The deciding phase is where a preferred alternative is selected and final presentation materials are prepared based on what was learned throughout the process.
KKKH4284 URBAN PLANNING OF SUSTAINABLE DEVELOPMENT
TASK 7 : URBAN RENEWAL
LECTURERS :
PROF. IR. DR. RIZA ATIQ ABDULLAH O.K. RAHMAT
DR. NAZRI BORHAN
DR. NORLIZA MOHD AKHIR
The document outlines the settlement planning process which involves 5 main steps:
1. Identifying a suitable area and assessing existing conditions
2. Declaring the area a planning area through public hearings and approval
3. Evaluating existing property interests like trees, crops, and buildings
4. Compensating landowners according to acquisition acts
5. Developing a general planning scheme to coordinate sustainable development
The process aims to properly plan urban development through public participation and compensation of existing land uses.
This document discusses three concepts related to planning theory: compact cities, public participation, and rationality. Compact cities are high-density urban developments built in balance with the natural environment that have clear boundaries and a mix of uses. Public participation involves engaging stakeholders and citizens affected by decisions. Rationality means acting based on facts and reality to avoid unwanted consequences, and there are different types of rationality like instrumental, incremental, and bounded rationality.
Land use planning refers to allocating land resources for different uses consistent with development goals. It involves classifying land, determining suitable land uses, and regulating development through tools like zoning maps and land use plans. The objectives are to promote efficient land use, reconcile conflicts, and guide sustainable development patterns. Land use planning organizations at the national, regional, and local levels coordinate to classify land and guide land allocation and conversion nationally and within their jurisdictions.
Site Planning- Principles and Considerations ameed inam
Basic Principles of Site Planning in Architecture and Components of Site Planning.
Inventory of Site Planning and its implementation in Building Design as well as Site Development
Urban planning involves the design and regulation of land use in urban environments. It impacts the physical form, economic and social aspects of cities. Key aspects of urban planning include infrastructure development, transportation systems, environmental protection, and allocation of green spaces. Urban planning theories guide the process and include rational planning, synoptic planning, and participatory planning. Planning occurs at various levels from national policy to municipal land use plans and master plans. Standardized indicators now exist to measure the performance and quality of life in cities through the ISO international standard on city indicators.
The document discusses the radial city planning patterns of Moscow and Washington DC. Moscow's plan features ring roads connected by radiating roads, with the core as the business area and industrial areas interspersed among residential zones. Washington DC was planned by Pierre L'Enfant and Andrew Ellicott along the Potomac River between Virginia and Maryland, and was burned in the War of 1812. Both cities exemplify radial city planning concepts.
Sustainable landscaping encompasses a variety of practices that have developed in response to environmental issues. These practices are used in every phase of landscaping, including design, construction, implementation and management of residential and commercial landscapes.
In land use planning, urban open space is open space areas for "parks", "green spaces", and other open areas. The landscape of urban open spaces can range from playing fields to highly maintained environments to relatively natural landscapes. They are commonly open to public access, however, urban open spaces may be privately owned. Areas outside city boundaries, such as state and national parks as well as open space in the countryside, are not considered urban open space. Streets, piazzas, plazas and urban squares are not always defined as urban open space in land use planning.
The document provides a history of architecture and urban planning from prehistoric to modern times. Some key points discussed include:
- Early cities in civilizations like the Indus Valley had planned streets laid out in a grid pattern with hierarchies of streets and residential privacy.
- The Greeks developed orthogonal urban layouts with Hippodamus seen as the first town planner. Greek cities had regular plans.
- The Romans established a standardized scheme with a central forum, gridded streets, and infrastructure like aqueducts. This influenced many European cities.
- In the Renaissance, ideal cities like Sforzinda were designed but often not fully realized. The Enlightenment saw more planned cities and colonies.
-
This document discusses the internal structure of urban areas, including density patterns and land use classifications. It describes how urban structure aims to minimize the total distance between people and facilities by distributing some facilities locally and relying on transportation systems for other facilities. This creates a hierarchical structure with different levels of central places and transportation networks. The patterns of urban land use that develop are influenced by economic factors like bid rents and land values, which are highest near the urban center and transportation routes.
The document discusses the field of landscape architecture. It defines landscape architecture as the art and science of planning and designing outdoor spaces while respecting the natural environment and meeting user needs. It describes the roles of related fields like architecture, planning, and urban design. It then outlines different approaches in landscape architecture, from traditional landscape gardening to more modern approaches like sustainability and habitat creation. It provides examples of projects implementing sustainable and resource-efficient landscaping.
Regional planning deals with efficient placement of land uses like farmland, cities, infrastructure, and wilderness across a larger area than individual towns. A region requires various land uses to support protection of farmland, cities, industry, transportation, and other needs. Regional development addresses region-wide environmental, social and economic issues through efficient infrastructure placement and zoning to sustainably grow a region.
This document provides an overview of urban planning and community architecture during the Renaissance period. It discusses factors that shaped cities such as modernization of warfare, colonial expansion, and dangers of rapid urbanization. Specific examples of urban planning from Italy, Spain, and France are presented, including Piazza del Popolo in Rome, the planned towns of Palmanova and Sabionetta in Italy, and Place des Vosges in Paris. The document also covers influences on Renaissance architecture like increased prosperity, the Silk Road, the weakness of the Church, and the rise of the middle class. Gardens, villas, and other architectural features from the Renaissance era are described.
This document provides an overview of site planning and site analysis. It defines site planning as allocating functions on a piece of land to efficiently utilize resources. The purpose of site planning is to fit design programs and sites harmoniously while considering natural, socio-economic, and technological factors. Site analysis involves researching and inventorying various elements of a site, such as location, neighborhood context, subsurface features, natural and manmade surface features, circulation, utilities, sensory factors, climate, and aesthetics. This information is then analyzed to achieve a successful site design that incorporates relevant site characteristics.
Introduction to Site Planning. These slides should be able to provide urban planners a simple guide to factors and issues to consider in planning a a site. These slides were prepared for urban design class for masters students in Makerere University Kampala ( Uganda)
Urban renewal involves the remodeling and rehabilitation of older urban areas through redevelopment, conservation, and redevelopment to address issues like inadequate housing, environmental degradation, and dilapidated infrastructure. It aims to improve living conditions and revitalize areas that have declined below standards. Common approaches include slum clearance, redevelopment, rehabilitation, housing improvement, conservation, and economic renewal projects. While originating in the US after World War 2, urban renewal is now practiced in Pakistan through local government programs that target both urban and surrounding rural settlements.
Site Planning and Site Analysis for Architectural ProjectsJIT KUMAR GUPTA
Presentation tries to map, detail and define the role and importance of studying, analyzing and understanding the site in the context of evolving appropriate and rational design solutions for any projects
Planning for Open Spaces to Make Cities HealthyJIT KUMAR GUPTA
Presentation is an attempt to showcase and aggregate the various approaches to making provision, planning, designing the open spaces to make cities and communities happy, healthy, productive, effective, efficient and sustainable in the ever growing urban milieu
Ebenezer Howard proposed the garden city concept as a solution to problems in late 19th century cities. He envisioned self-sufficient towns of around 30,000 people, surrounded by greenbelts, that combined the benefits of town and country living without their drawbacks. Letchworth Garden City, built in 1903, was the first to implement Howard's ideas of concentric design and separation of housing, industry and agriculture. The garden city movement aimed to reform urban planning and integrate people more with nature.
Urban Design at different levels of PlanningYajush Sonar
This document provides guidelines for urban design in several areas:
1. It discusses the basics of urban design including its multi-disciplinary nature and focus on designing places for people.
2. Guidelines are given for massing and intensity in urban fringe and rural areas, including respecting the natural environment and providing linkages between urban and rural spaces.
3. Recommendations are made for development height profiles including stepping down heights from city centers to edges and maintaining view corridors.
Design Thinking in Business: An Introduction to Imagineering and an Illustrat...Mario Ramirez Reyes
Design thinking in business involves imagining new solutions and approaches to problems through creativity and holistic problem solving rather than linear analysis. It challenges traditional frames and encourages diverging into multiple possibilities. Designing for business means planning organizations that can transform with their changing context. Imagineering applies a design approach to value creation by using imagination to engage people through compelling new artifacts.
Design can be applied to creating structures, environments, interfaces, products, services, and processes. Common types of design include architecture, interior design, landscape architecture, industrial design, fashion design, engineering design, software design, user interface design, graphic design, information architecture, game design, user experience design, business architecture, scenic design, lighting design, and sound design. Each of these types of design involves conceiving and planning elements to achieve functional, aesthetic, and user-focused outcomes.
Land use planning refers to allocating land resources for different uses consistent with development goals. It involves classifying land, determining suitable land uses, and regulating development through tools like zoning maps and land use plans. The objectives are to promote efficient land use, reconcile conflicts, and guide sustainable development patterns. Land use planning organizations at the national, regional, and local levels coordinate to classify land and guide land allocation and conversion nationally and within their jurisdictions.
Site Planning- Principles and Considerations ameed inam
Basic Principles of Site Planning in Architecture and Components of Site Planning.
Inventory of Site Planning and its implementation in Building Design as well as Site Development
Urban planning involves the design and regulation of land use in urban environments. It impacts the physical form, economic and social aspects of cities. Key aspects of urban planning include infrastructure development, transportation systems, environmental protection, and allocation of green spaces. Urban planning theories guide the process and include rational planning, synoptic planning, and participatory planning. Planning occurs at various levels from national policy to municipal land use plans and master plans. Standardized indicators now exist to measure the performance and quality of life in cities through the ISO international standard on city indicators.
The document discusses the radial city planning patterns of Moscow and Washington DC. Moscow's plan features ring roads connected by radiating roads, with the core as the business area and industrial areas interspersed among residential zones. Washington DC was planned by Pierre L'Enfant and Andrew Ellicott along the Potomac River between Virginia and Maryland, and was burned in the War of 1812. Both cities exemplify radial city planning concepts.
Sustainable landscaping encompasses a variety of practices that have developed in response to environmental issues. These practices are used in every phase of landscaping, including design, construction, implementation and management of residential and commercial landscapes.
In land use planning, urban open space is open space areas for "parks", "green spaces", and other open areas. The landscape of urban open spaces can range from playing fields to highly maintained environments to relatively natural landscapes. They are commonly open to public access, however, urban open spaces may be privately owned. Areas outside city boundaries, such as state and national parks as well as open space in the countryside, are not considered urban open space. Streets, piazzas, plazas and urban squares are not always defined as urban open space in land use planning.
The document provides a history of architecture and urban planning from prehistoric to modern times. Some key points discussed include:
- Early cities in civilizations like the Indus Valley had planned streets laid out in a grid pattern with hierarchies of streets and residential privacy.
- The Greeks developed orthogonal urban layouts with Hippodamus seen as the first town planner. Greek cities had regular plans.
- The Romans established a standardized scheme with a central forum, gridded streets, and infrastructure like aqueducts. This influenced many European cities.
- In the Renaissance, ideal cities like Sforzinda were designed but often not fully realized. The Enlightenment saw more planned cities and colonies.
-
This document discusses the internal structure of urban areas, including density patterns and land use classifications. It describes how urban structure aims to minimize the total distance between people and facilities by distributing some facilities locally and relying on transportation systems for other facilities. This creates a hierarchical structure with different levels of central places and transportation networks. The patterns of urban land use that develop are influenced by economic factors like bid rents and land values, which are highest near the urban center and transportation routes.
The document discusses the field of landscape architecture. It defines landscape architecture as the art and science of planning and designing outdoor spaces while respecting the natural environment and meeting user needs. It describes the roles of related fields like architecture, planning, and urban design. It then outlines different approaches in landscape architecture, from traditional landscape gardening to more modern approaches like sustainability and habitat creation. It provides examples of projects implementing sustainable and resource-efficient landscaping.
Regional planning deals with efficient placement of land uses like farmland, cities, infrastructure, and wilderness across a larger area than individual towns. A region requires various land uses to support protection of farmland, cities, industry, transportation, and other needs. Regional development addresses region-wide environmental, social and economic issues through efficient infrastructure placement and zoning to sustainably grow a region.
This document provides an overview of urban planning and community architecture during the Renaissance period. It discusses factors that shaped cities such as modernization of warfare, colonial expansion, and dangers of rapid urbanization. Specific examples of urban planning from Italy, Spain, and France are presented, including Piazza del Popolo in Rome, the planned towns of Palmanova and Sabionetta in Italy, and Place des Vosges in Paris. The document also covers influences on Renaissance architecture like increased prosperity, the Silk Road, the weakness of the Church, and the rise of the middle class. Gardens, villas, and other architectural features from the Renaissance era are described.
This document provides an overview of site planning and site analysis. It defines site planning as allocating functions on a piece of land to efficiently utilize resources. The purpose of site planning is to fit design programs and sites harmoniously while considering natural, socio-economic, and technological factors. Site analysis involves researching and inventorying various elements of a site, such as location, neighborhood context, subsurface features, natural and manmade surface features, circulation, utilities, sensory factors, climate, and aesthetics. This information is then analyzed to achieve a successful site design that incorporates relevant site characteristics.
Introduction to Site Planning. These slides should be able to provide urban planners a simple guide to factors and issues to consider in planning a a site. These slides were prepared for urban design class for masters students in Makerere University Kampala ( Uganda)
Urban renewal involves the remodeling and rehabilitation of older urban areas through redevelopment, conservation, and redevelopment to address issues like inadequate housing, environmental degradation, and dilapidated infrastructure. It aims to improve living conditions and revitalize areas that have declined below standards. Common approaches include slum clearance, redevelopment, rehabilitation, housing improvement, conservation, and economic renewal projects. While originating in the US after World War 2, urban renewal is now practiced in Pakistan through local government programs that target both urban and surrounding rural settlements.
Site Planning and Site Analysis for Architectural ProjectsJIT KUMAR GUPTA
Presentation tries to map, detail and define the role and importance of studying, analyzing and understanding the site in the context of evolving appropriate and rational design solutions for any projects
Planning for Open Spaces to Make Cities HealthyJIT KUMAR GUPTA
Presentation is an attempt to showcase and aggregate the various approaches to making provision, planning, designing the open spaces to make cities and communities happy, healthy, productive, effective, efficient and sustainable in the ever growing urban milieu
Ebenezer Howard proposed the garden city concept as a solution to problems in late 19th century cities. He envisioned self-sufficient towns of around 30,000 people, surrounded by greenbelts, that combined the benefits of town and country living without their drawbacks. Letchworth Garden City, built in 1903, was the first to implement Howard's ideas of concentric design and separation of housing, industry and agriculture. The garden city movement aimed to reform urban planning and integrate people more with nature.
Urban Design at different levels of PlanningYajush Sonar
This document provides guidelines for urban design in several areas:
1. It discusses the basics of urban design including its multi-disciplinary nature and focus on designing places for people.
2. Guidelines are given for massing and intensity in urban fringe and rural areas, including respecting the natural environment and providing linkages between urban and rural spaces.
3. Recommendations are made for development height profiles including stepping down heights from city centers to edges and maintaining view corridors.
Design Thinking in Business: An Introduction to Imagineering and an Illustrat...Mario Ramirez Reyes
Design thinking in business involves imagining new solutions and approaches to problems through creativity and holistic problem solving rather than linear analysis. It challenges traditional frames and encourages diverging into multiple possibilities. Designing for business means planning organizations that can transform with their changing context. Imagineering applies a design approach to value creation by using imagination to engage people through compelling new artifacts.
Design can be applied to creating structures, environments, interfaces, products, services, and processes. Common types of design include architecture, interior design, landscape architecture, industrial design, fashion design, engineering design, software design, user interface design, graphic design, information architecture, game design, user experience design, business architecture, scenic design, lighting design, and sound design. Each of these types of design involves conceiving and planning elements to achieve functional, aesthetic, and user-focused outcomes.
UX Design refers to the term User Experience Design, while UI Design stands for User Interface Design. Both elements are crucial to a product and work closely together. But despite their professional relationship, the roles themselves are quite different, referring to very different parts of the process and the design discipline. Where UX Design is a more analytical and technical field, UI Design is closer to what we refer to as graphic design, though the responsibilities are somewhat more complex.
Environmental design is an interdisciplinary field that applies creative and analytical skills to shape the built environment. It includes areas like architecture, urban planning, landscape design, and more. The document discusses the fields within environmental design and the hands-on learning opportunities available through the program, such as studios, community projects, study abroad, and internships.
User Experience Desgin and Design Thinking from 10000 ftDodzidenu Dzakuma
The document discusses user experience design (UXD) and an upcoming event by OKC Design+Tech. It provides an overview of UXD, explaining that it involves designing user experiences that are transparent and improve people's lives. It covers important UXD concepts like user research, usability, accessibility, prototyping, onboarding, patterns, and design thinking. The document promotes an upcoming workshop on design thinking that will discuss people's experiences with air travel.
Não se restringindo apenas a objetos, o Design abrange conceitos, sistemas e processos e proporciona sinergias, emoções positivas, acrescentando sempre valor sem necessariamente aumentar os recursos incorporados. A prosperidade da nossa sociedade resulta também da competência na concepção destes processos, sistemas e produtos que favorecem a saúde das pessoas, o bem-estar alargado e a gestão de recursos, considerando o respetivo ciclo de vida integral.
How Design Thinking will fix Design ThinkingBert Bräutigam
1. Design thinking has been misperceived as only involving designers when it actually requires interdisciplinary teams across design, business, and technology disciplines.
2. Effective product teams have design, business, and technology leads working together, with the design discipline playing a transversal role rather than being dissolved into other areas.
3. Experience metrics are now part of product key performance indicators to measure user behavior and experience, alongside traditional business and technology metrics.
A Rambling Talk on Interaction Design Industry TrendsTing-Han Chen
This document summarizes Daniel Chen's talk on interaction design industry trends. Chen defines the interaction design industry as fields that employ interaction design thinking and techniques as a core value, where interaction design plays a critical role. He identifies 17 emerging fields that could be considered part of the interaction design industry, including interactive exhibitions, art, products, games, home appliances, and more. Chen notes the interaction design industry is broad and ill-defined, but many domains are incorporating interaction design. The future of the industry may include new interaction design-driven businesses, more entrepreneurship, and growth of service design and user experience consulting.
Architects: the original Experience DesignersUXDXConf
Have you ever stood inside an awe-inspiring building? Have you ever gone to a museum and found yourself lost and confused? How about visiting someone’s house and loving the layout of the kitchen or hating the backyard? These are all experiences you have had in a physical space and, more times than not, these spaces have been designed by an architect, who I like to call the “original experience designers”.
So what are the similarities between designing a physical space and designing a digital product? What can we learn from architects and how they work? Tune in to find out how an age old profession can teach us how to better design modern applications.
Get the whole course at: http://skl.sh/2aJFcb3 --> What Is Design? Create amazing designs even when you'd never created anything in your whole life! Amazing design for non designers.
Design Thinking - unlock your creative potentialSameer Chavan
Design thinking is a human-centered approach to problem solving that involves divergent and convergent thinking. It emphasizes generating many ideas through brainstorming and then converging on the best solutions. The process involves understanding user needs, rapid prototyping, and iterating based on user feedback. At Intuit, adopting design thinking led to transforming the company into one driven by a focus on customer experience and innovation. After initial success improving their Net Promoter Score stalled, Intuit's CEO decided to focus on the role of design in innovation. This included creating a team of "innovation catalysts" and holding forums to teach employees design thinking techniques.
This document provides tips and advice for navigating a career in user experience (UX) design. It discusses key aspects of UX like defining UX versus UI, conducting user research, creating wireframes and prototypes, and effective project planning and workflow. Specific tips include talking to clients to understand needs, using agile methods, conducting card sorting and user interviews, and the importance of sketching, wireframing and iteration. Recommended books and tools are also provided.
Exploring Top Product Design Trends at Shalin DesignsShalin Designs
Discover 2023's top product design trends at Shalin Designs. From cutting-edge innovation to timeless aesthetics, stay ahead in the design game with our insightful guide. Elevate your creativity today! Check Now: https://shalindesigns.com/blog/product-design-trends/
Virtu Design Institute - VDIS10019 Lecture - Environmental Graphic DesignVirtu Institute
Morag Myerscough is a graphic designer known for her experiential and environmental design work. She challenges traditional graphic design by extending it into the 3rd dimension. Some of her projects include a newspaper exhibition that invited viewers to sit and read amidst a 3D structure of the printed pages, and a clever newspaper ad that used typography to create an illusion of depth on a flat page depicting a kitchen. Her work demonstrates how graphic design has evolved from flat, printed media to interactive, spatial experiences that engage the user in new ways.
Virtu Design Institute - VDIS10019 lecture - Environmental Graphic DesignVirtu Institute
The focus of this lecture is to identify Environmental Graphic Design with a focus on understanding the definitions and design aspects of ‘User Centric Design’. We will also analyse how navigation, interaction and interpretation impact the user experience in Wayfinding Design.
In this lecture we will look at how traditional graphic design media has been challenged into the 3D form. We will also look at some interesting case studies of how traditional graphic design has extended into the 3D with environmental typography, experiential design and wayfinding design.
IxDA Shanghai Face-to-Face Meeting kick-off: an introduction to what is IxDA, our vision, some initiatives we\'d like to drive within the local communitiy, and a call-to-arms!
User experience (UX) design involves studying how people interact with computers and designing interfaces that provide good usability, accessibility, and pleasure. It draws from fields like human-computer interaction, behavioral science, and design. UX design uses techniques like user research, prototyping, and testing to understand users' needs and create products and services that meet business goals. The user-centered design (UCD) process involves researching users, developing concepts based on insights, and designing interfaces and features. UX design aims to create solutions that are easy and satisfying to use.
Design Driven Development (D3) is a simple agile-based methodology that centers software development around innovation and design. D3 turns design practices into a set of games that bring different skills and experiences together to make collaborative design decisions. The games help understand customer needs, question assumptions, design solutions, and experience prototypes. D3 defines roles for various participants including users, business analysts, designers, programmers, and managers to connect diverse views and envision solutions beyond problem boundaries.
This is a presentation from a series related to course LA181 named "Introduction to Environmental Design", Faculty of Environmental Design, King Abdulaziz University.
This is a presentation from a series related to course LA181 named "Introduction to Environmental Design", Faculty of Environmental Design, King Abdulaziz University.
4th Lesson ( Professions of the Environmental Design ): Part 2: ( Urban and R...Farouk Daghistani
This is a presentation from a series related to course LA181 named "Introduction to Environmental Design", Faculty of Environmental Design, King Abdulaziz University.
4th Lesson ( Professions of the Environmental Design ): Part 1: ( Architectur...Farouk Daghistani
This is a presentation from a series related to course LA181 named "Introduction to Environmental Design", Faculty of Environmental Design, King Abdulaziz University.
3rd Lesson ( Built Environment in Responding to Natural & Human Environments ...Farouk Daghistani
This is a presentation from a series related to course LA181 named "Introduction to Environmental Design", Faculty of Environmental Design, King Abdulaziz University.
3rd Lesson ( Built Environment in Responding to Natural & Human Environments ...Farouk Daghistani
This is a presentation from a series related to course LA181 named "Introduction to Environmental Design", Faculty of Environmental Design, King Abdulaziz University.
1st Lesson ( Environment ): Part 3: ( Human Environment )Farouk Daghistani
This is a presentation from a series related to course LA181 named "Introduction to Environmental Design", Faculty of Environmental Design, King Abdulaziz University.
1st Lesson ( Environment ): Part 2: ( Built Environment )Farouk Daghistani
This is a presentation from a series related to course LA181 named "Introduction to Environmental Design", Faculty of Environmental Design, King Abdulaziz University.
This is a presentation from a series related to course LA181 named "Introduction to Environmental Design", Faculty of Environmental Design, King Abdulaziz University.
International Upcycling Research Network advisory board meeting 4Kyungeun Sung
Slides used for the International Upcycling Research Network advisory board 4 (last one). The project is based at De Montfort University in Leicester, UK, and funded by the Arts and Humanities Research Council.
2. What is Environmental Design?
Environment is all of the living and nonliving
things that surround an organism.
Environment Design
?
E n v I r o n m e n t a l D e s I g n
Prepared by Dr. Farouk Daghistani
3. Design is the process of originating and developing a plan for
a product, a structure or a system.
It is like climbing a mountain in dark.
Design
Prepared by Dr. Farouk Daghistani
4. Good Design: Functional, Aesthetic and Economic
Good / Bad Designs
Prepared by Dr. Farouk Daghistani
8. Design Scales
1. Master Plan
2. Site Plan
3. Site Design
4. Construction Details
Prepared by Dr. Farouk Daghistani
9. an interdisciplinary design field that considers surrounding
environments (Natural, Human and Built) when originating and
developing plans for products, structures or systems.
In other words, it is a POSITIVE human intervention in the ENVIRONMENT
… and so “Environmental Design” is:
Prepared by Dr. Farouk Daghistani