1. Page | 1
PERSONAL DETAILS:
Date of Birth: 13th June 1979
Nationality: Fijian
Residential Address: 2/75 Buderim Street
Currimundi Qld 4551
M: 0414082354
Email: christopher.narayan@hotmail.co.nz
CAREER PROFILE
I am motivated and qualified Mechanical/ Fitter and Turner with significantexperiencewithin the Engineering
and Manufacturing Industries.As a Maintenance Fitter/Turner, I am customer oriented focusingon increasing
production,minimizingplant/equipment downtime, costs and maximizingoverall plantefficiency.I poses
experience in conveyor systems, pneumatics,hydraulicsand maintenance.With over 13 years of work
experience in the respective field,I have got the skillsto multipletask and work under pressure.Also ensuring
that Health and Safety guidelines arefollowed atall times. Some Projects worked on with Decmil Group Australia
include;QGC, Origin Energy, West sideskids, Siemens and Talinga SiteProject.
Currently I am employed by Vinidex Pty Ltd in Toowoomba as a Maintenance Fitter.
KEY COMPETENCIES
• Broad Experience – 14 years work experience as Fitter and Turner/ Maintenance Fitter. Companies
worked for: Thomas Foods International –Wallangarra,EastcoastDevelopment Engineering (Decmil
Group), Purcell’s Engineering,Asaleo Care, Industrial Engineering,Mechanical Services ltd and South Sea
Engineering Ltd.
• Welding Expertise - Experience in Arc welding, General MIG, TIG Welding and Stick
• Workplace safety - knowledge of HSE principlesand practical experienceincludingJHA, Take 5.
• Cultural Awareness - Awareness of cultural heritageissues and respectfor people of different
nationalities.
• Flexibility - Strong work ethic with professional attitude;willingand ableto work 24/7 shifts,rotating
rosters,nightshifts,FIFO if required. I have worked on Talinga siteprojectfor Origin Energy.
• Technology - Select and useof appropriatetools,equipment’s, materials and machines .Apply
knowledge of appropriateengineering principles,techniques,procedures, diagnostic methods,tools
and equipment to achieve the required outcome. Improve efficiency of machines and equipment in
order to minimisewaste.
• Planning and organising - Plan,prioritiseand sequence work operations/ complete activities on timely
manner. Select and use planningtechniques and tools.Maintaininga clean and a safeworkingarea.
• Learning - Check and clarify task related information with appropriatepersonnel or supervisor.Identify
customers’ requirements with respect to the operation or quality of the product or service. Willingto
undertake further studies or courses if required by the employer.
• Self-management - Carry out work safely and in accordancewith company policy and procedure. Take
responsibility for own work outcomes. Able to followdetailed instructions.
• Team Player - Ability to work in a team or individually.Excellentinterpersonal relationship with
colleagues.Contribute to a group effort in order to plan and carry out work. Identify work roles,
communicate and cooperate with others. Adaptableto workplacechange and to learningnew skills.
• Communication - Read, interpret, followand communicate information on written job instructions,
specifications,standard operatingprocedures,charts,lists,drawings and other applicablereference
documents.
TICKETS AND LICENCES
• Work Safely in the Construction Industry –White Card 201304925
• Safe spineInjury Prevention Program – Safe Spine Leader Level 1
• QLD Driver’s license
• General Occupancy & FirstResponse Trainingwith Sicada Fire& Safety (in
accordancewith QLD Building& Safety Regulation 2008)
• License to operate a Forkliftand EWP
• Verification of Competency – conduct Telescopic Materialshandler operations (VOC)
2. Page | 2
MACHNINESAND TOOLS WORKED ON
Lathe Machine
MillingMachine
Bench Drill
Hand Tool Torque
wrenches
Hydraulic Notches
Horizontal Boring
Machine
Line Boring Machine
Cutter/ Tool Grinder
Surface Grinder
Threading Machines
Punch and shears
Radial ArmDrill
Shaper
Cylindrical Grinder
EDUCATION AND QUALIFICATIONS
• Australia Pacific Technical College(APTC) : Certificate III Engineering - Mechanical Trade (MEM3025)
• Fiji National University (Fiji Instituteof Technology) : Trade Certificate in Fitting & Machining
• TPAF (Training& Productivity Authority of Fiji : National Trade Test Certificate -Fitting Machining
Class II & II
EMPLOYMENT HISTORY
Vinidex Pty Ltd (Employment by HB Recruitment)
Employment Period: 11th August 2016 to current
Normal Hours of work: Full Time
Position: Maintenance Fitter
Job Description:
Preventive maintenance of Plants and equipment -
Breakdowns
Resolve operational or technical equipment problems
Trouble-shooting
Workingon Pneumatics and Hydraulics
Fabrication
Machining
Plumbing
Welding
THOMAS FOODS INTERNATIONAL
Employment Period: 22-10-15 to July 2015 (Company Closed its operation in Wallangarra Location)
Normal Hours of work: Full Time
Position: Maintenance Fitter
Job Description:
General MaintenanceWork -
Breakdowns
Workingon Pneumatics and Hydraulics
Welding (MIG TIG and STICK)
Weldingstainlesssteel tabletops, fabricatingmotor covers
Machining conveyor rollers,pump shafts
Pump servicing (Centrifugal and Mono Pumps)
Preventive Maintenance (Hydraulic and Pneumatic servicing,checkingconveyor belts,gear box,
DECMIL AUSTRALIA PTY LTD (EAST COAST DEVELOPEMNT PTY LTD)
Employment Period: 01-07-13 to 23-09-15
Normal Hours of work: Full Time
Position: Mechanical Fitter/ PipeFitter
Job Description:
General Fitting/Machiningand Assembly
work
Maintenance, Servicingand Overhaulingof
Plants and Equipment
Reading and interpreting P&ID’s
Structural assembly such as Separator and
metering (gas) skids including valves,pipe
spooling, selection of the correct gaskets,
3. Page | 3
studs and fasteners, fittingof screwed
pipingand connections,fit up of
fabricated Structural steel Supports and
sections
Gas cutting, MIG and TIG welding, Gas
piping,Fabrication works
Pressuretesting ( i.e. Nitrogen, Hydrostatic
and compressed Air)
Leak Test and Corrosion inhibitor
application.
Pipe Fitting,Prepping Pipes,
Tackingup pipe spoolingoff ISO dwgs to
small tolerance.
General Machining works as and when
required
Flange Management
PURCELLS ENGINEERING
(Line boring/CNC Machining/Mechanical Projects/Powder Coating)
Employment Period: 18-11-12 to 25-06-13
Normal Hours of work: Full Time
Position: Fitter and Turner / Line borer
Job Description
Fittingand Machining
Line boring
Bore build up and machiningto size.
Onsiteand workshop plantmaintenance
Collated components for assembly
Fabricatinglargeand small parts asper
drawingand assembled parts as required
ASALEO CARE (SCA HYGIENE AUSTRALASIA LTD)
Employment Period: 26-03-12 TO 14-11-12
Normal Hours of work: Full Time
Position: Fitter and Turner
Job Description
Carryingout planned preventive
maintenance on all convertingand
wrappingequipment’s
Troubleshootingand fixingpaper
converting and wrappingequipment
failures/malfunctions
Performing condition monitoringon plant
Performing hot works when required (arc
Welding,gas cutting and grinding)
Machiningof gears on millingmachines
Machiningof new and build up shafts to
requirements
Machiningof key ways on shafts
Machiningtaper turning, groovingand
cutting threads on shafts
Understandingmachine operations and
doingtest run to confirm correctoperation
after repairs
Servicingof pneumatic components
Workingon new equipment installations
and upgrade Projects from time to time
INDUSTRIAL ENGINEERING LIMITED
Employment Period: 24-11-08 TO 23-03-12
Normal Hours of work: Full Time
Position: Fitter and Turner
Job Description
General Lathe and Milling works
Faultfindingand servicingof pneumatic
devices and tools.
Servicing,machining and installation of
centrifugal pumps,
Gear Cutting,
Internal Keyway,
Internal and External threads cutting
Basic Arc welding,
MachiningBoatShafts and pump shafts
Weldingas and when required,
Couplingalignment,
working on driveshafts,
working on pump impellers/ balancing
impeller,
4. Page | 4
Changingof mechanical seals Gear box alignment
MECHANICAL SERVICES LIMITED
Employment Period: 05-11-04 TO 14-11-08
Normal Hours of work: Full Time
Position: Fitter and Turner
Job Description
General Lathe and Milling,works,
Faultfindingand servicingof pneumatic
devices and tools.
Servicing,machiningand installation of
pumps,
Gear Cutting,
Internal Keyway,
Internal and External thread cutting,
Changingof mechanical seals
left hand, righthand squareThread,
Basic Arc welding,
MachiningBoatShafts and pump shafts
Weldingas and when required, Pump
servicing,
Couplingalignment,
Workingon pump impellers/ balancing
impeller,
SOUTH SEA ENGINEERING LIMITED
Employment Period: 15-03-01 TO 28-10-04
Normal Hours of work: Full Time
Position: Trainee Fitter and Turner
General Lathe and Millingworks
MachiningBoatShafts and pump shafts
General boat engine overhaul
Pump servicingcouplingalignment
REFEREES
Stuart Mahon
PlantEngineer – Thomas Foods International
Wallangarra
Web: www.thomasfoodsinternationl.com.au
Contact: 0402462636
Stuart.Mahon@thomasfoods.com
Daryl Jones
PlantManager – Thomas Foods International
Wallangarra
Web: www.thomasfoodsinternational.com.au
Contact: 0427100817
Daryl.Jones@thomasfoods.com
Luke Gavin
Supervisor – East CoastDevelopment Engineering
(Decmil Group
Web: www.decmil.com.au
Contact: 0408412583
Cormac Chambers – Engineer
Engineer – East CoastDevelopment Decmil
Australia Pty Ltd Engineering
Web: www.decmil.com.au
Contact: 0479031222
Email:Cormac.chambers@gmail.com
Tom Murphy – Leading Hand
Decmil Australia Pty Ltd
Contact: 0450728459
Email:tommurphy6167@gmail.com