Automatic Railway Gate Control
Project Objective :
Provide an automatic railway gate at a Level crossing replacing the gates operated by the gatekeeper to provide safety to the road users by reducing the accidents.
video URL :
http://www.youtube.com/watch?v=c0Z61bOQp8w
Simplest possible way to get through unwanted presentations in easiest way.. Technically concept is made clear but not the controller and embedded coding part...
A PROJECT PPT ON ALCOHOL INTERLOCK
TO REDUCE DRUNK & DRIVE HAZARDS WE NEED A DEVICE WHICH CAN HELP US TO PREVENT SUCH DRIVERS THEY HAVE DRUNK .BY USING THIS DEVICE WE CAN REDUCE THE PROBABILITY OF DRUNK AND DRIVE ACCIDENTS.
THIS DEVICE IS BASED ON ARDIUNO ATMEGA328 MICRO CONTROLLER .
Automatic Railway Gate Control
Project Objective :
Provide an automatic railway gate at a Level crossing replacing the gates operated by the gatekeeper to provide safety to the road users by reducing the accidents.
video URL :
http://www.youtube.com/watch?v=c0Z61bOQp8w
Simplest possible way to get through unwanted presentations in easiest way.. Technically concept is made clear but not the controller and embedded coding part...
A PROJECT PPT ON ALCOHOL INTERLOCK
TO REDUCE DRUNK & DRIVE HAZARDS WE NEED A DEVICE WHICH CAN HELP US TO PREVENT SUCH DRIVERS THEY HAVE DRUNK .BY USING THIS DEVICE WE CAN REDUCE THE PROBABILITY OF DRUNK AND DRIVE ACCIDENTS.
THIS DEVICE IS BASED ON ARDIUNO ATMEGA328 MICRO CONTROLLER .
Speed Control of Induction Motor Using PLC and SCADA SystemIJERA Editor
Automation or automatic control is the use of various control systems for operating equipment such as
machinery, processes in factories, boilers and heat-treating ovens, switching in telephone networks, steering and
stabilization of ships, aircraft and other applications with minimal or reduced human intervention. Some
processes have been completely automated. The motor speed is controlled via the driver as an open loop control.
To make a more precise closed loop control of motor speed we will use a tachometer to measure the speed and
feed it back to the PLC, which compares to the desired value and take a control action, then the signal is
transferred to the motor – via driver – to increase / decrease the speed. We will measure the speed of the motor
using an incremental rotary encoder by adjusting parameters (PLC, driver) and also we need to reduce the
overall cost of the system. Our control system will be held using the available Siemens PLC. In addition, we will
monitor motor parameters via SCADA system.
Speed Control of Induction Motor Using PLC and SCADA SystemIJERA Editor
Automation or automatic control is the use of various control systems for operating equipment such as
machinery, processes in factories, boilers and heat-treating ovens, switching in telephone networks, steering and
stabilization of ships, aircraft and other applications with minimal or reduced human intervention. Some
processes have been completely automated. The motor speed is controlled via the driver as an open loop control.
To make a more precise closed loop control of motor speed we will use a tachometer to measure the speed and
feed it back to the PLC, which compares to the desired value and take a control action, then the signal is
transferred to the motor – via driver – to increase / decrease the speed. We will measure the speed of the motor
using an incremental rotary encoder by adjusting parameters (PLC, driver) and also we need to reduce the
overall cost of the system. Our control system will be held using the available Siemens PLC. In addition, we will
monitor motor parameters via SCADA system.
Analysis of Induction Motor Speed Control Using SCADA Based Drive Operated Sy...IJSRD
This Paper represents the analysis of induction motor speed control using VFD (Variable Frequency Drive) system operated by PLC-SCADA system. The main aim of the paper is to dealt with the concept of speed control of a three-phase induction motor with energy saving. To do so, a VFD (Variable Frequency Drive) is used for controlling the speed of a three-phase induction motor with variable load attached to the motor. It certainly leads to the best performance and high efficiency of the induction motor. Programmable Logic Controller (PLC) and Supervisory Control And Data Acquisition (SCADA) are two new systems to control a Variable Frequency Drive (VFD) whose output is given to a three-phase induction motor and driving a conveyor belt. The conveyor belt has three sensors are inputs which senses a passing object and carries out the necessary instructions programmed in ladder logic programming of the PLC through the computer (PC). The SCADA software installed in the PC in turn enables the human operator to control the entire operation away from the plant and just by using the virtual inputs designated on his computer screen.
Introduction of Programmable Logic Controller to Electric Overhead Travelling...paperpublications3
Abstract: In this paper, we are using PLC programmes to control the crane movement. The application of PLC could simplify circuits and make the design easier, safer and more reliable. Earlier in Industry, relays and contactors are adopted to control the crane motion in desired directions. Starting of the cranes and speed control of the crane is realized through convectional starters and resistance series. This kind of design has low reliability, complex operation, high electrical failure rate, power waste and low efficiency .These problems can be rectified by using programmable logic controller.
We at Pantech ProEd provide assistance in academic projects based on IEEE standard journals and transactions. Our services cater to all the domains belonging to Circuit branches and Information and Communication engineering branches.
Our methodology of execution and delivery is state - of -art, in essence a professionally designed, intensively tested, work flow model is applied.
Our Project support services caters to the following courses,
1) B.E / B.Tech (EEE/ECE/CSE/IT)
2) M.E (Power Systems)
3) M.E (Power Electronics & Drives)
4) M.E (High Voltage Engineering)
5) M.E (Electrical Drives & Embedded Control)
6) M.E (Control & Instrumentation Engineering)
7) M.E (Embedded System Technologies)
8) M.E (Applied Electronics)
9) M.E (Communication Systems)
10) M.E (VLSI Design)
11) M.E (Medical Electronics)
12) M.E (CSE)
13) M.E (Software Engineering)
14) M.E (Multimedia Technology)
15) M.Tech (Information Technology)
16) M.C.A
17) M.E (Systems Engineering and Operations Research)
18) M.E (Communication and Networking)
19) M.E (Avionics)
20) M.E. (Mobile Pervasive and Computing)
21) M.E. (Network Engineering)
22) M.E (Computer & Communication)
Design and Construction of DC Motor Speed Controller Using Android.pptEEESrproject
Rapid progress in microelectronics and microcontrollers in recent years has made it possible to apply modern control technology to control efficient and reliable operation of many applications such as the engine, anti-lock braking system (ABS), cruise, steering, and vehicle traction. Many of these operations including DC motor and therefore there is a need for implementing effective control strategies with digital control of these motors. The speed of DC motor is directly proportional to armature voltage and inversely proportional to field flux and adjustable speed drives can be operated over a wide range by controlling armature or field excitation. Development of various solid state switching devices such as diode, transistor and thyristor along with various analog/digital chips used in firing/controlling circuits, have made dc drives more handy for control in numerous areas of applications. For DC motor speed control, closed-loop PWM technique is widely used and well known . In this technique, the regulation of motor’s speed is realized by changing the voltage of motor which is adjusted by the duty ratio of PWM. In order to improve the performance of motor’s speed regulation and to reduce the steady-state error of the rotational speed of motor, a high- performance microcontroller can be used.In this work, an arduino microcontroller is used for implementation.
WHEELZ TRACKER is a provider of GPS based vehicle tracking system for transportation, Utility vehicles, Public transit, Logistics and delivery. Our GPS technology solution designed for vehicle owners and managers with a personalized digital dashboard with live-tracking, Fuel monitoring and alert features.
Bed side patients monitoring system with emergency alert
2014 ieee project plc based title
1. PLC BASED TITLE 2013-14
1. On the Implementation of Industrial Automation Systems Based on PLC
2. Performance of HTTP Protocol in Networked Control Systems
3. Small-Signal Modeling of Active-Clamped ZVS Current-Fed Full-Bridge Isolated DC/DC Converter
and Control System Implementation Using PSoC
4. Remote Control Laboratory Using EJS Applets and Twin CAT Programmable Logic Controllers
5. Bayesian-Network-Based Reliability Analysis of PLC Systems
6. Performance of HTTP Protocol in Networked Control Systems
7. Automata-Based Railway Signaling and Interlocking System Design [Testing Ourselves]
8. Predictive Consumption Models for Electro pneumatic Production Systems
9. Preemptive Arc Fault Detection Techniques in Switchgear and Control gear
10. Development of PLC-Based Software for Increasing the Dependability of Production Automation
Systems
11. Automatic Generation of the Supervisor Code for Industrial Switched-Mode Systems
12. A Switching Control Strategy for the Reduction of Torque Ripple for PMSM
13. PMSM sliding mode FPGA-based control for torque ripple reduction
14. Precision Control of Modular Robot Manipulators: The VDC Approach with Embedded FPGA
15. A Programmable Controller IC for DC/DC Converter and Power Factor Correction Applications
16. FPGA Implementation of Sliding-Mode-Control Algorithm for Scaled Bilateral Tele-operation