Increasing Safety Bomb Disposal Missions, It Is a Robot which gives the Safety to the Humans /Soldiers by using its sensing Technology in Battlefields.
WSN Based Temperature Monitoring System for Multiple Locations in Industryijtsrd
Wireless sensor network technology has demonstrated a great potential for industrial, commercial, and consumer applications. Speci cally, in process monitoring and control, process data such as pressure, humidity, temperature, ow, level, viscosity, density and vibration intensity measurements can be collected through sensing units and transferred wirelessly to a control system for operation and management. Adopting WSNs for process monitoring and control provides great advantages over traditional wired system. In today's world we are facing with many di erent types of emergencies in the indoor environment. Response to such emergencies is critical in order to protect resources including human life and also we can save property from damage. This wireless sensor network for Temperature monitoring System which can report the emergency to the users in various forms, such as pop ups on a Computer screen, SMS on their cell phones and so on. Due to this exibility of reporting low cost wireless sensor network prepared for emergency response system of future. We are going to develop three wireless sensor nodes and we have to place in di erent position in the building using arduino board and we have to inform to the master node or monitoring node about the temperature available at each sensor node. While sending data to each and every sensor is very costly. Hence nodes are connected to WSN and their is only one node called 'Gateway' which collects the data from all other nodes and sends it to the cloud. Aditya Jogdand | Amit Chaudhari | Niranjan Kadu | Udaykumar Shroff ""WSN Based Temperature Monitoring System for Multiple Locations in Industry"" Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-3 | Issue-4 , June 2019, URL: https://www.ijtsrd.com/papers/ijtsrd23124.pdf
Paper URL: https://www.ijtsrd.com/engineering/computer-engineering/23124/wsn-based-temperature-monitoring-system-for-multiple-locations-in-industry/aditya-jogdand
Increasing Safety Bomb Disposal Missions, It Is a Robot which gives the Safety to the Humans /Soldiers by using its sensing Technology in Battlefields.
WSN Based Temperature Monitoring System for Multiple Locations in Industryijtsrd
Wireless sensor network technology has demonstrated a great potential for industrial, commercial, and consumer applications. Speci cally, in process monitoring and control, process data such as pressure, humidity, temperature, ow, level, viscosity, density and vibration intensity measurements can be collected through sensing units and transferred wirelessly to a control system for operation and management. Adopting WSNs for process monitoring and control provides great advantages over traditional wired system. In today's world we are facing with many di erent types of emergencies in the indoor environment. Response to such emergencies is critical in order to protect resources including human life and also we can save property from damage. This wireless sensor network for Temperature monitoring System which can report the emergency to the users in various forms, such as pop ups on a Computer screen, SMS on their cell phones and so on. Due to this exibility of reporting low cost wireless sensor network prepared for emergency response system of future. We are going to develop three wireless sensor nodes and we have to place in di erent position in the building using arduino board and we have to inform to the master node or monitoring node about the temperature available at each sensor node. While sending data to each and every sensor is very costly. Hence nodes are connected to WSN and their is only one node called 'Gateway' which collects the data from all other nodes and sends it to the cloud. Aditya Jogdand | Amit Chaudhari | Niranjan Kadu | Udaykumar Shroff ""WSN Based Temperature Monitoring System for Multiple Locations in Industry"" Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-3 | Issue-4 , June 2019, URL: https://www.ijtsrd.com/papers/ijtsrd23124.pdf
Paper URL: https://www.ijtsrd.com/engineering/computer-engineering/23124/wsn-based-temperature-monitoring-system-for-multiple-locations-in-industry/aditya-jogdand
War Field Spying Robot with Fire Fighting Alarm.vansh_raheja
This is a project presentation on war field spying robot with fire fighting alarm. This presentation will helpful for those who want to make robots basically a Spy Robot. This will describes the hardware and the software requirements of the project. This will also describe the use of this project in different areas.
War Field Spying Robot with Fire Fighting Alarm.vansh_raheja
This is a project presentation on war field spying robot with fire fighting alarm. This presentation will helpful for those who want to make robots basically a Spy Robot. This will describes the hardware and the software requirements of the project. This will also describe the use of this project in different areas.
MAASTECH OFFER ROBOTICS PROJECTS....
Cell Phone Controlled Three Axis Robot With Artificial Intelligence
Introduction
A robot is an electro-mechanical device that can perform autonomous or preprogrammed tasks. A robot may act under the direct control of a human (eg. the robotic arm of the space shuttle) or autonomously under the control of a programmed computer. Robots may be used to perform tasks that are too dangerous or difficult for humans to implement directly (e.g. nuclear waste clean up) or may be used to automate repetitive tasks that can be performed with more precision by a robot than by the employment of a human (e.g. automobile production.)
BEST ROBOTIC PROJECT CENTER CHENNAI-ROBOTIC PROJECT CENTER MAASTECHASHOKKUMAR RAMAR
BEST ROBOTIC PROJECT CENTER CHENNAI-ROBOTIC PROJECT CENTER MAASTECH..............
Introduction
A robot is an electro-mechanical device that can perform autonomous or preprogrammed tasks. A robot may act under the direct control of a human (eg. the robotic arm of the space shuttle) or autonomously under the control of a programmed computer. Robots may be used to perform tasks that are too dangerous or difficult for humans to implement directly (e.g. nuclear waste clean up) or may be used to automate repetitive tasks that can be performed with more precision by a robot than by the employment of a human (e.g. automobile production.)
BEST FINAL YEAR PROJECT CENTER CHENNAI MAASTECH-BEST BEST PROJECTSASHOKKUMAR RAMAR
BEST FINAL YEAR PROJECT CENTER CHENNAI MAASTECH-BEST BEST PROJECTS/COCHIN,HYDERABAD, BANGALORE,TAMILNADU..
Abstract:
This project aims at designing a robot, which has freedom of movement along all the 3 axes and its motion is controlled by means of wheels. The user can control the movements using a Cellphone from a remote place. The system is made more useful by introducing artificial intelligence to it. By artificial intelligence, we mean designing the robot is such a manner that in situation which require decision making, the robot identifies the presence of the obstacle, alerts the user and moreover awaits instruction from the user for the further action. Other condition, which the robot can determine, is presence of fire. I.e., high temperature and presence of metals in vicinity.
Design and implementation of an sms based robotic system for hole- detection ...eSAT Journals
Abstract This paper presents the design and implementation of SMS-based robotic system for hole-detection in surface pipes using GPS/GPRS/GSM technology. In industries today, surface pipelines are used to transport fluids; some of these pipelines have joints which are welded together. In a situation whereby the welding is not perfectly done, leakage of fluids may occur, leading to product loss and downtime. Therefore to checkmate this issue of pipeline leakage, an SMS-based robotic system is designed to inspect the pipelines for holes and if light is sensed in the pipelines through the sensing devices on the robot, a Short Message Service (SMS) indicating the location where the light was sensed is sent to the operator’s phone with help of the SIM 900 GPS/GPRS/GSM MODEM installed on the robot hardware system. The robot system is designed with an Arduino Uno Micro-Controller and some sensing devices installed on it. The system is programmed using embedded C language. After the implementation, the robot system was tested which could detect holes in surface pipelines and sent short message to the personnel’s mobile phone. Keywords: Arduino Uno Board, GPS/GPRS/GSM technology, Robotics, SIM900 Modem, Sensors
WHEELZ TRACKER is a provider of GPS based vehicle tracking system for transportation, Utility vehicles, Public transit, Logistics and delivery. Our GPS technology solution designed for vehicle owners and managers with a personalized digital dashboard with live-tracking, Fuel monitoring and alert features.
1. BOMB DETECTION ROBOT WITH WIRELESS CAMERA
ABSTRACT
In the present world of electronics, most of the research work is going on in the field on
embedded system programming and security related applications and robots. As electronics
student we have keen interest in two above fields which leads us to do a project namely High
tech Robot with remote camera for the bomb squad
This prototype robot is capable of moving across a suspected bomb area and remotely guided
by bomb squad which is directed and navigated using remote camera and computer. The unit
is capable of detecting obstacles, metal, and sending relevant information regarding this to
the base stations. The unit sends information related to metal.
These functionalities are achieved by interfacing adequate sensors to an 89c51
microcontroller. A Metal detection unit uses ultrasound for detection object. To detect the
obstacle we will be using IR sensor module. The unit is guide by mounting a wireless camera
on top of the robot, using which the whole robot and its activities are controlled by using
remote PC.
Base station consists of RF receiver connected to a decoder circuitry and camera receiver
unit. The information from the decoder is fed to LED display and buzzer unit.