The document provides instructions for configuring a basic Quality of Service (QoS) test setup using Cisco Pagent tools on routers R1 and TrafGen. Key steps include:
1. Configure the switch port VLANs and router interfaces for traffic between TrafGen and R1.
2. Enter the TGN configuration on TrafGen to generate traffic flows towards R1 and back to TrafGen on various ports.
3. Verify traffic is received and transmitted on R1's interfaces using the show interfaces command.
In this presentation, we will discuss how IEEE standard 802.3ad and its implications allow third-party devices such as switches, servers, or any other networking device that supports trunking to interoperate with the distributed trunking switches (DTSs) seamlessly. Check out the webinar recording where this presentation was used: http://community.arubanetworks.com/t5/Wired-Intelligent-Edge-Campus/Technical-Webinar-LACP-and-distributed-LACP-ArubaOS-Switch/td-p/458170
Register for the upcoming webinars: https://community.arubanetworks.com/t5/Training-Certification-Career/EMEA-Airheads-Webinars-Jul-Dec-2017/td-p/271908
In this presentation, we will cover how the ArubaOS switch virtualization technologies can deliver high-performance and highly available switching while simplifying management and lowering costs. Check out the webinar recording where this presentation was used: https://community.arubanetworks.com/t5/Wired-Intelligent-Edge-Campus/Technical-Webinar-Switch-Stacking-ArubaOS-Switch/td-p/471348
Labs cisco ccna icnd1 proposé par firebrandtraining pour appliqué les connaissances apporté.
les bonnes pratiques dans le domaine reseau informatique vous obliger de faire des labs après la fin de chaque chapitre abordé dans les classes cisco.
In this presentation, we will discuss how IEEE standard 802.3ad and its implications allow third-party devices such as switches, servers, or any other networking device that supports trunking to interoperate with the distributed trunking switches (DTSs) seamlessly. Check out the webinar recording where this presentation was used: http://community.arubanetworks.com/t5/Wired-Intelligent-Edge-Campus/Technical-Webinar-LACP-and-distributed-LACP-ArubaOS-Switch/td-p/458170
Register for the upcoming webinars: https://community.arubanetworks.com/t5/Training-Certification-Career/EMEA-Airheads-Webinars-Jul-Dec-2017/td-p/271908
In this presentation, we will cover how the ArubaOS switch virtualization technologies can deliver high-performance and highly available switching while simplifying management and lowering costs. Check out the webinar recording where this presentation was used: https://community.arubanetworks.com/t5/Wired-Intelligent-Edge-Campus/Technical-Webinar-Switch-Stacking-ArubaOS-Switch/td-p/471348
Labs cisco ccna icnd1 proposé par firebrandtraining pour appliqué les connaissances apporté.
les bonnes pratiques dans le domaine reseau informatique vous obliger de faire des labs après la fin de chaque chapitre abordé dans les classes cisco.
Labs cisco ccna icnd1 proposé par firebrandtraining pour appliqué les connaissances apporté.
les bonnes pratiques dans le domaine reseau informatique vous obliger de faire des labs après la fin de chaque chapitre abordé dans les classes cisco.
Tutorial about MPLS Implementation with Cisco Router, this third of three chapter discuss about how to Optimize MPLS Networks, especially for L3VPN / VPRN, by using Route Reflector (RR) Technology
Presentation about interior gateway routing protocol EIGRP which covers most of the concepts and features of the protocol.
Delivered by Dmitry Figol, CCIE R&S #53592.
Labs cisco ccna icnd1 proposé par firebrandtraining pour appliqué les connaissances apporté.
les bonnes pratiques dans le domaine reseau informatique vous obliger de faire des labs après la fin de chaque chapitre abordé dans les classes cisco.
Tutorial about MPLS Implementation with Cisco Router, this third of three chapter discuss about how to Optimize MPLS Networks, especially for L3VPN / VPRN, by using Route Reflector (RR) Technology
Presentation about interior gateway routing protocol EIGRP which covers most of the concepts and features of the protocol.
Delivered by Dmitry Figol, CCIE R&S #53592.
Conversion Optimsiation - Using Customer Intelligence to Convince and ConvertIn Marketing We Trust
Going Beyond the Transaction is a case study of how customer intelligence and insights from data can be used to optimise conversion, especially for businesses with online/offline customer journeys.
VLAN, Trunk and 802.1q Router Configuration Objectiv.docxdickonsondorris
VLAN, Trunk and 802.1q Router Configuration
Objectives
Initial Configuration
VLAN Trunking Configuration
802.1q Router/Switch trunking
Topology
You can click the Show Lab Content button to download the lab or you can download the l ab from
[email protected] in Content.
VLAN, Trunk and 802.1q Router Configuration
Step 1: Initial Switch Configuration
Configure hostnames on the switches
Configure enable secret, console and vty (Telnet) passwords as uwstout
Configure VLANs 10, 20 and 30 on StoutSW1 and StoutSW2
Configure the ports the PCs are connected to in the proper vlans
Shutdown the fa0/4 interfaces on each switch
Configure an IEEE 802.1Q trunk between StoutSW1 and StoutSW2 using the fa0/1 interfaces
Configure the IP addresses and subnet masks on PC1a, PC1b and PC2 according to the topology
diagram
Verify your configuration before moving on to Step 2
If you need help remembering the commands for the initial configuration steps, try using ? or refer to the
previous labs.
Before moving to Step 2 verify your trunk and VLAN configuration, PC IP addresses and that the switchports
for the PCs are in the correct vlans. Use “show” commands and ipconfig to verify the initial configuration.
VLAN, Trunk and 802.1q Router Configuration
Step 2: Configure 802.1 trunk between Menomonie and StoutSW1
Data from one vlan cannot cross into another vlan without the help of a router to route the data. Currently
the PCs cannot successfully send to each other because they are on different VLANs. In this step you will
configure a trunk between the Menomonie router and the StoutSW1 switch. (This type of configuration is
referred to as “Router-on-a-Stick”) so the router can be used to route traffic between the VLANs. The
physical interface on the router that is connected to StoutSW1 is fastethernet0/1 so you will configure the
trunked sub-interfaces on the fastethernet0/1 interface. Then configure fastethernet0/8 on StoutSW1 to trunk.
Configure the Router:
Configure the hostname on the router to Menomonie:
In global configuration mode type, hostname Menomonie
Configure the first sub-interface on Menomonie to route vlan 10
In global configuration mode type, interface fastethernet0/1.10
In interface configuration mode for fa0/1.10 type, encapsulation dot1q 10
Configure the second sub-interface on Menomonie to route vlan 20
In global configuration mode type, interface fastethernet0/1.20
In interface configuration mode for fa0/1.20 type, encapsulation dot1q 20
Configure the third sub-interface on Menomonie to route vlan 30
In global configuration mode type, interface fastethernet0/1.30
In interface configuration mode for fa0/1.30 type, encapsulation dot1q 30
Now that the virtual trunked interfaces have been configured you can assign an IP address to the
interfaces. The addresses for each inter ...
IP Infusion Application Note for 4G LTE Fixed Wireless AccessDhiman Chowdhury
SKY Brazil is one of the largest Pay TV provider in Brazil with 5Million+ subscribers created world’s first disaggregated 5G-ready Fixed Wireless Access (FWA) network using IPInfusion’s disaggregated Cell Site Gateway Solution to serve 35K broadband subscribers.
Learn how the deployment was done, read this application note to know more about the usecase and OcNOS configurations.
CCNA 4 Answers, CCNA 1 Version 4.0 Answers, CCNA 2 Version 4.0 Answers, CCNA 3 Version 4.0 Answers, CCNA 4 Version 4.0 Answers, CCNA 1 Final Version 4.0 Answers, CCNA 2 Final Version 4.0 Answers, CCNA 3 Final Version 4.0 Answers, CCNA 4 Final Version 4.0 Answers
Subnetting Properly subnet addressing blocks to accommodate the sit.pdfebrahimbadushata00
Subnetting: Properly subnet addressing blocks to accommodate the site\'s VLAN sizes. You will
not need to implement VLANs here; rather, you will create the correct sizing to properly
accommodate the devices stated per the xACME educational topology. Carefully consider the
challenges faced when structuring subnets too large and/or too small during your design. The
starting Worchester site addressing range is 10.20.0.0 /16 (per the xACME educational topology
diagram). Formatting per subnet should follow the format below and should be clearly stated and
placed within a table.
NetID
mask/CIDR values
broadcast
usable range
No additional device configurations required to complete
Existing VLANs
-
Remote locations vary in terms of size and requirements. Some implementations will require
current site router/switch-running configurations, which will be provided. All sites will use the
following four VLANs, but you will need to configure only what is asked per site (some
assumptions will be made).
Existing VLANs, per xACME:Faculty VLAN
used by faculty on-site for all office locations (non-instructional communications)
total devices per site will vary
Administrative VLAN
used by staff on-site for business administrative communications
total devices per site will vary
Academic VLAN
used by faculty and students for classroom labs and instructional communications
total devices per site will vary
Server VLAN
used by IT staff for all technology/management communications
total devices per site will vary
The types of devices per site will be the same; however, the number of deployed devices may
vary (all documented in the xAcme educational topology).
Routers Per Site:
Switches Per Site:
Note:Device type will not impact your configuration commands and implementation of ALL
required technologies will use Cisco IOS commands/concepts learned in our TestOut lecture(s).
Standard switchports will be configured and used as trunk OR access ports, and DCE ends
should be noted when configuring serial ports per router.Cisco 2800 Series Integrated
ServicesInterfaces Ports Available4 Fast Ethernet Interfaces
(Per Router)2 Serial Interfaces
(Per Router)fa0/0s0/0/0fa0/1s0/0/1fa1/0fa1/1 Acme Educational Topology Public Address
Range 165.128.63.0 /26 Private Network 10.0.0.0 /8 Boston Site Administrative VLA structional
VLAN Device List 4 Devices 34 Devices Network 10.10.0.0 Switches: Catalyst 6500 Series
Server VLAN Faculty VLAN Devices 5 Devices 96 Gigabit Ports fa010 Mod 220 Total Hosts
Module 2.gl1j1 gl n Stub Area Module 3 gi2u1-g gi012 Boston, MA Module 4 31-g 3/24 Site
Router 2 Router 2800 Series Integrated Services Sacramento. SWTch1 Sacramento SWRch2 Sac
3 024 ta0A0 Pot Contuurations uper Router 4 Fast Ethernet erfaces Sacramento Site 010
Network 10.50.0.0 2- fa011 fa 100 42 Total Hosts 65.128.63. Stub Area Boston, 2 Serial
Interfaces Route Boston, MA Site Router 3 DCE Sacramento, CA 0.255.25 48 30 0,255 .252 130
Internet Faculty VLAN Worchester Site 21 Devices Network.
Why You Should Replace Windows 11 with Nitrux Linux 3.5.0 for enhanced perfor...SOFTTECHHUB
The choice of an operating system plays a pivotal role in shaping our computing experience. For decades, Microsoft's Windows has dominated the market, offering a familiar and widely adopted platform for personal and professional use. However, as technological advancements continue to push the boundaries of innovation, alternative operating systems have emerged, challenging the status quo and offering users a fresh perspective on computing.
One such alternative that has garnered significant attention and acclaim is Nitrux Linux 3.5.0, a sleek, powerful, and user-friendly Linux distribution that promises to redefine the way we interact with our devices. With its focus on performance, security, and customization, Nitrux Linux presents a compelling case for those seeking to break free from the constraints of proprietary software and embrace the freedom and flexibility of open-source computing.
Removing Uninteresting Bytes in Software FuzzingAftab Hussain
Imagine a world where software fuzzing, the process of mutating bytes in test seeds to uncover hidden and erroneous program behaviors, becomes faster and more effective. A lot depends on the initial seeds, which can significantly dictate the trajectory of a fuzzing campaign, particularly in terms of how long it takes to uncover interesting behaviour in your code. We introduce DIAR, a technique designed to speedup fuzzing campaigns by pinpointing and eliminating those uninteresting bytes in the seeds. Picture this: instead of wasting valuable resources on meaningless mutations in large, bloated seeds, DIAR removes the unnecessary bytes, streamlining the entire process.
In this work, we equipped AFL, a popular fuzzer, with DIAR and examined two critical Linux libraries -- Libxml's xmllint, a tool for parsing xml documents, and Binutil's readelf, an essential debugging and security analysis command-line tool used to display detailed information about ELF (Executable and Linkable Format). Our preliminary results show that AFL+DIAR does not only discover new paths more quickly but also achieves higher coverage overall. This work thus showcases how starting with lean and optimized seeds can lead to faster, more comprehensive fuzzing campaigns -- and DIAR helps you find such seeds.
- These are slides of the talk given at IEEE International Conference on Software Testing Verification and Validation Workshop, ICSTW 2022.
A tale of scale & speed: How the US Navy is enabling software delivery from l...sonjaschweigert1
Rapid and secure feature delivery is a goal across every application team and every branch of the DoD. The Navy’s DevSecOps platform, Party Barge, has achieved:
- Reduction in onboarding time from 5 weeks to 1 day
- Improved developer experience and productivity through actionable findings and reduction of false positives
- Maintenance of superior security standards and inherent policy enforcement with Authorization to Operate (ATO)
Development teams can ship efficiently and ensure applications are cyber ready for Navy Authorizing Officials (AOs). In this webinar, Sigma Defense and Anchore will give attendees a look behind the scenes and demo secure pipeline automation and security artifacts that speed up application ATO and time to production.
We will cover:
- How to remove silos in DevSecOps
- How to build efficient development pipeline roles and component templates
- How to deliver security artifacts that matter for ATO’s (SBOMs, vulnerability reports, and policy evidence)
- How to streamline operations with automated policy checks on container images
Pushing the limits of ePRTC: 100ns holdover for 100 daysAdtran
At WSTS 2024, Alon Stern explored the topic of parametric holdover and explained how recent research findings can be implemented in real-world PNT networks to achieve 100 nanoseconds of accuracy for up to 100 days.
Encryption in Microsoft 365 - ExpertsLive Netherlands 2024Albert Hoitingh
In this session I delve into the encryption technology used in Microsoft 365 and Microsoft Purview. Including the concepts of Customer Key and Double Key Encryption.
State of ICS and IoT Cyber Threat Landscape Report 2024 previewPrayukth K V
The IoT and OT threat landscape report has been prepared by the Threat Research Team at Sectrio using data from Sectrio, cyber threat intelligence farming facilities spread across over 85 cities around the world. In addition, Sectrio also runs AI-based advanced threat and payload engagement facilities that serve as sinks to attract and engage sophisticated threat actors, and newer malware including new variants and latent threats that are at an earlier stage of development.
The latest edition of the OT/ICS and IoT security Threat Landscape Report 2024 also covers:
State of global ICS asset and network exposure
Sectoral targets and attacks as well as the cost of ransom
Global APT activity, AI usage, actor and tactic profiles, and implications
Rise in volumes of AI-powered cyberattacks
Major cyber events in 2024
Malware and malicious payload trends
Cyberattack types and targets
Vulnerability exploit attempts on CVEs
Attacks on counties – USA
Expansion of bot farms – how, where, and why
In-depth analysis of the cyber threat landscape across North America, South America, Europe, APAC, and the Middle East
Why are attacks on smart factories rising?
Cyber risk predictions
Axis of attacks – Europe
Systemic attacks in the Middle East
Download the full report from here:
https://sectrio.com/resources/ot-threat-landscape-reports/sectrio-releases-ot-ics-and-iot-security-threat-landscape-report-2024/
In his public lecture, Christian Timmerer provides insights into the fascinating history of video streaming, starting from its humble beginnings before YouTube to the groundbreaking technologies that now dominate platforms like Netflix and ORF ON. Timmerer also presents provocative contributions of his own that have significantly influenced the industry. He concludes by looking at future challenges and invites the audience to join in a discussion.
Unlocking Productivity: Leveraging the Potential of Copilot in Microsoft 365, a presentation by Christoforos Vlachos, Senior Solutions Manager – Modern Workplace, Uni Systems
Observability Concepts EVERY Developer Should Know -- DeveloperWeek Europe.pdfPaige Cruz
Monitoring and observability aren’t traditionally found in software curriculums and many of us cobble this knowledge together from whatever vendor or ecosystem we were first introduced to and whatever is a part of your current company’s observability stack.
While the dev and ops silo continues to crumble….many organizations still relegate monitoring & observability as the purview of ops, infra and SRE teams. This is a mistake - achieving a highly observable system requires collaboration up and down the stack.
I, a former op, would like to extend an invitation to all application developers to join the observability party will share these foundational concepts to build on:
Communications Mining Series - Zero to Hero - Session 1DianaGray10
This session provides introduction to UiPath Communication Mining, importance and platform overview. You will acquire a good understand of the phases in Communication Mining as we go over the platform with you. Topics covered:
• Communication Mining Overview
• Why is it important?
• How can it help today’s business and the benefits
• Phases in Communication Mining
• Demo on Platform overview
• Q/A
PHP Frameworks: I want to break free (IPC Berlin 2024)Ralf Eggert
In this presentation, we examine the challenges and limitations of relying too heavily on PHP frameworks in web development. We discuss the history of PHP and its frameworks to understand how this dependence has evolved. The focus will be on providing concrete tips and strategies to reduce reliance on these frameworks, based on real-world examples and practical considerations. The goal is to equip developers with the skills and knowledge to create more flexible and future-proof web applications. We'll explore the importance of maintaining autonomy in a rapidly changing tech landscape and how to make informed decisions in PHP development.
This talk is aimed at encouraging a more independent approach to using PHP frameworks, moving towards a more flexible and future-proof approach to PHP development.
DevOps and Testing slides at DASA ConnectKari Kakkonen
My and Rik Marselis slides at 30.5.2024 DASA Connect conference. We discuss about what is testing, then what is agile testing and finally what is Testing in DevOps. Finally we had lovely workshop with the participants trying to find out different ways to think about quality and testing in different parts of the DevOps infinity loop.