This document summarizes an IR controlled relay board with 2 channels. It can be used to control household appliances up to 100 watts by switching them on and off remotely. Proper polarity is important when connecting the power supply to avoid damaging the board. The board uses inputs from a 12-0-12V 500mA transformer to control two separate outputs for switches 1 and 2.

1. IR Controlled Relay Board - 2 Channel
It can also use to control (switch on - Off )house hold power supply like fan tubelight etc
also can be used in robot wirelessor other devisesupto 100Watts only ,
Product Link
2 Channel IR Remote Control
http://www.onlinetps.com/shop/index.php?main_page=product_info&cPath=16_83&products_id=626
! Be Careful about polarity of power Supply, Wrong polarity may damage the board
permanently,also take care while handling 220V AC
Product Discription
User Manual For 2 Channel IR Remote Control
( Part # : TPS-00626 )
Note:
Product Disclaimer
This Manual is only for customers of www.onlineTPS.com / Total Project Solutions, public
release or web publishing is prohibited without prior permission from Total Project Solutions – India
The recommendations and suggestions regarding product application and use that are offered on
www.onlinetps.com, in our product brochures, or information provided by any employee, broker, or distributor of
TPS (Total Project Solutions), are a guide in the use of this product and are not a guarantee to their performance since
TPS, has no control over the use to that other parties may apply the product. Specification may change without any notice.
Not suitable for critical or industrial applications unless stated, please clarify any doubts before using. V1.0R0.0
Copyright © 2011 Total Project Solutions
E7/83F, Ashoka Society , Arera Colony, Bhopal 462016 (M.P.) India
e-mail: onlinetps.com@gmail.com +91-9826015410 , +91-755-2420735
12
12
0
Input from secondary
of 12-0-12 V 500mA
Transformer
Output for Switch 1
Output for Switch 2
Example
Output for Switch 1
Output for Switch 2