1 3
2 4
A V D G POWER
+9V
R2
RN1
RN2
DIP
4CH RF TX BOARD
C2
C1 E
R1
ANT
DUO
H-BRIDGE
MOTOR1 MOTOR2
POWER
S1 S2
POWER
C
DIODE
©TPS
onlineTPS.com
5V/6V/12V/24V
R1
onlineTPS.com
INPUT
+
+
4 Channel RF Remote Controller Board - 433/315 MHz with Relay
(Part # : TPS-00675 / TPS-00627)
Part #: TPS-00675 and TPS-00627
http://www.onlinetps.com/shop/index.php?main_page=product_info&cPath=75_20&products_id=675
http://www.online .com/shop/TPS
10 Pin Box Header Pin out
OUTPUT
12345
R1
D
R2
VT
POWER
C1
C2
C3
12V DC Supply
V-In
OUTPUT
RN1
RN2
DIP
4CH RF RX BOARD
ANT
+
L298 PORT
L298/L293 PORT
Pin No. 1-
Pin No. 2-
Pin No. 3-
Pin No. 4-
Pin No. 5-
Pin No. 6-
Pin No. 7-
Pin No. 8-
Pin No. 9- Gnd
Pin No. 10-
+5V(ENABLE B)
+5V (ENABLE A)
+5V
INPUT-3
INPUT-1
INPUT-4
INPUT-2
/D11
/D10
/D9
/D8
NC
NC
OP=OUTPUT
NC=NO CONNECTION
Description:
Note: DIP 8 bit address switch must be same position at transmitter and receiver board.
2 Inch(50.87mm)
3 Inch(76.3mm)
2 Inch(50.87mm)
2Inch(50.87mm)
3.5Inch(89.1mm)
Pin# 9 is GND
Pin# 10 is +ve
12V DC Supply
Pin No. 1- Gnd
Pin No. 2-
Pin No. 3-
Pin No. 4-
Pin No. 5-
D1
D2
D3
D4
This output at receiver can be use to
interface 5V logic level Microcontrollers
This output at receiver can be use to
interface H Bridge IC like L298 or L293
Our Part#TPS-00625 (L298)
http://www.onlinetps.com/shop/index.php?main_page=product_info&cPath=75_20&products_id=627
: Always Refer Datasheet before using.Important
Compatibility with our other addon Boards
(You can Connect directly via 10Pin FRC Cable -TPS-00265)
TPS-00625-L298N Dual H-Bridge Motor Driver Board
http://www.online .com/shop/TPS
Total Project Solutions
www. nlineTPS.comComponents at your doorstep...
© Total Project Solutions : E7/83F, Ashoka Society,Arera Colony,Bhopal 462016(M.P.) India
+91-9826015410,+91-9826050109 +91-755-2420735
email: sales@onlinetps.com , onlinetps.com@gmail.com Web: www.onlineTPS.com

4 channel rf remote controller board manual

  • 1.
    1 3 2 4 AV D G POWER +9V R2 RN1 RN2 DIP 4CH RF TX BOARD C2 C1 E R1 ANT DUO H-BRIDGE MOTOR1 MOTOR2 POWER S1 S2 POWER C DIODE ©TPS onlineTPS.com 5V/6V/12V/24V R1 onlineTPS.com INPUT + + 4 Channel RF Remote Controller Board - 433/315 MHz with Relay (Part # : TPS-00675 / TPS-00627) Part #: TPS-00675 and TPS-00627 http://www.onlinetps.com/shop/index.php?main_page=product_info&cPath=75_20&products_id=675 http://www.online .com/shop/TPS 10 Pin Box Header Pin out OUTPUT 12345 R1 D R2 VT POWER C1 C2 C3 12V DC Supply V-In OUTPUT RN1 RN2 DIP 4CH RF RX BOARD ANT + L298 PORT L298/L293 PORT Pin No. 1- Pin No. 2- Pin No. 3- Pin No. 4- Pin No. 5- Pin No. 6- Pin No. 7- Pin No. 8- Pin No. 9- Gnd Pin No. 10- +5V(ENABLE B) +5V (ENABLE A) +5V INPUT-3 INPUT-1 INPUT-4 INPUT-2 /D11 /D10 /D9 /D8 NC NC OP=OUTPUT NC=NO CONNECTION Description: Note: DIP 8 bit address switch must be same position at transmitter and receiver board. 2 Inch(50.87mm) 3 Inch(76.3mm) 2 Inch(50.87mm) 2Inch(50.87mm) 3.5Inch(89.1mm) Pin# 9 is GND Pin# 10 is +ve 12V DC Supply Pin No. 1- Gnd Pin No. 2- Pin No. 3- Pin No. 4- Pin No. 5- D1 D2 D3 D4 This output at receiver can be use to interface 5V logic level Microcontrollers This output at receiver can be use to interface H Bridge IC like L298 or L293 Our Part#TPS-00625 (L298) http://www.onlinetps.com/shop/index.php?main_page=product_info&cPath=75_20&products_id=627
  • 2.
    : Always ReferDatasheet before using.Important Compatibility with our other addon Boards (You can Connect directly via 10Pin FRC Cable -TPS-00265) TPS-00625-L298N Dual H-Bridge Motor Driver Board http://www.online .com/shop/TPS Total Project Solutions www. nlineTPS.comComponents at your doorstep... © Total Project Solutions : E7/83F, Ashoka Society,Arera Colony,Bhopal 462016(M.P.) India +91-9826015410,+91-9826050109 +91-755-2420735 email: sales@onlinetps.com , onlinetps.com@gmail.com Web: www.onlineTPS.com