1.3.2a modelos de referencia
•Download as PPTX, PDF•
0 likes•309 views
This document provides an overview of key concepts related to the OSI model and TCP/IP protocol suite for data and computer communications. It describes the OSI model as a layered approach where each layer performs a subset of communication functions and relies on the layer below. It also discusses elements of standardization like protocol specifications, service definitions, and addressing. The document outlines the seven layers of the OSI model and four layers of the dominant TCP/IP protocol architecture.
Report
Share
Report
Share
Recommended
Introduction to Networking and OSI Model
This document provides an introduction to networking and the OSI model. It defines key networking concepts like protocols, network devices, and components. It then explains the seven layers of the OSI model including application, presentation, session, transport, network, data link, and physical layers. For each layer it describes its main functions and examples. It emphasizes the importance of the OSI model for standardizing networking protocols to enable global communication and provide a common platform for developers.
Osi Model Lambert K
The document discusses the OSI model, which is a networking architecture standard consisting of 7 layers - physical, data link, network, transport, session, presentation, and application layer. Each layer has a specific role, with the physical layer dealing with physical connections and bit transmission, and higher layers handling tasks like error checking, routing, session establishment, data formatting, and application-specific functions. The OSI model was widely adopted because it promotes interoperability between different network systems.
OSI MODEL
1. The OSI model is a standard reference model that defines the functions of a networking system by separating it into 7 layers.
2. Each layer has a specific role and provides services to the layer above it. Data moves down the layers at the sending device and up at the receiving device.
3. The model was developed in 1984 by ISO to provide a common way of designing and implementing communication between any two systems using a network. It aims to make networks more flexible, efficient and easy to maintain.
Lecture2
The document provides an overview of the OSI model, which is a standard communication architecture for connecting devices. It describes the seven layers of the OSI model from physical to application layer and their functions. Each layer provides services to the layer above it and communicates with the same layer on other systems. Data is encapsulated with protocol information as it moves down the layers before being transmitted over the network.
ELEC2 - Lecture 1
This document provides an overview of the Open Systems Interconnection (OSI) model, which defines 7 layers of networking architecture:
1) Physical layer - Defines physical interface and data transmission
2) Data-link layer - Provides error-free transfer of data frames between devices
3) Network layer - Determines data transmission path based on network conditions
4) Transport layer - Ensures reliable delivery of packets in proper order
5) Session layer - Enables applications to establish communication sessions
6) Presentation layer - Translates data between systems for encryption and compression
7) Application layer - Provides interfaces for programs to access network services
OSI Reference Model
This document presents an academic description of the OSI reference model. It was created by a group of 5 students for their Data Communication course taught by Ms. Itisha Nowrin. The presentation will cover the 7 layers of the OSI model, including the physical, data link, network, transport, session, presentation, and application layers. It will also discuss what the OSI model is, how data flows through the layers, and provide a summary of the functions of each layer.
Lecture2
The document discusses the OSI model, which is a standard networking framework that defines 7 layers of communication. It was developed by ISO in 1984 to establish a common way for diverse communication systems to interconnect. Each layer performs a specific task, passing data to the next layer. Data moves down the layers at the source and up at the destination, with each layer adding header information. This layered approach separates functions and makes the network easier to manage and troubleshoot. The TCP/IP model is also discussed as an alternative networking framework.
ELEC2 - Lecture 1
This document contains summaries of key topics related to Windows Server management:
1. It describes the seven layers of the OSI model and provides examples of the functions of each layer.
2. It also discusses common networking terms like hubs, bridges, routers, and gateways and explains how they relate to the OSI model layers.
3. Finally, it briefly introduces the concept of subnet masks and their role in defining the network and host portions of an IP address.
Recommended
Introduction to Networking and OSI Model
This document provides an introduction to networking and the OSI model. It defines key networking concepts like protocols, network devices, and components. It then explains the seven layers of the OSI model including application, presentation, session, transport, network, data link, and physical layers. For each layer it describes its main functions and examples. It emphasizes the importance of the OSI model for standardizing networking protocols to enable global communication and provide a common platform for developers.
Osi Model Lambert K
The document discusses the OSI model, which is a networking architecture standard consisting of 7 layers - physical, data link, network, transport, session, presentation, and application layer. Each layer has a specific role, with the physical layer dealing with physical connections and bit transmission, and higher layers handling tasks like error checking, routing, session establishment, data formatting, and application-specific functions. The OSI model was widely adopted because it promotes interoperability between different network systems.
OSI MODEL
1. The OSI model is a standard reference model that defines the functions of a networking system by separating it into 7 layers.
2. Each layer has a specific role and provides services to the layer above it. Data moves down the layers at the sending device and up at the receiving device.
3. The model was developed in 1984 by ISO to provide a common way of designing and implementing communication between any two systems using a network. It aims to make networks more flexible, efficient and easy to maintain.
Lecture2
The document provides an overview of the OSI model, which is a standard communication architecture for connecting devices. It describes the seven layers of the OSI model from physical to application layer and their functions. Each layer provides services to the layer above it and communicates with the same layer on other systems. Data is encapsulated with protocol information as it moves down the layers before being transmitted over the network.
ELEC2 - Lecture 1
This document provides an overview of the Open Systems Interconnection (OSI) model, which defines 7 layers of networking architecture:
1) Physical layer - Defines physical interface and data transmission
2) Data-link layer - Provides error-free transfer of data frames between devices
3) Network layer - Determines data transmission path based on network conditions
4) Transport layer - Ensures reliable delivery of packets in proper order
5) Session layer - Enables applications to establish communication sessions
6) Presentation layer - Translates data between systems for encryption and compression
7) Application layer - Provides interfaces for programs to access network services
OSI Reference Model
This document presents an academic description of the OSI reference model. It was created by a group of 5 students for their Data Communication course taught by Ms. Itisha Nowrin. The presentation will cover the 7 layers of the OSI model, including the physical, data link, network, transport, session, presentation, and application layers. It will also discuss what the OSI model is, how data flows through the layers, and provide a summary of the functions of each layer.
Lecture2
The document discusses the OSI model, which is a standard networking framework that defines 7 layers of communication. It was developed by ISO in 1984 to establish a common way for diverse communication systems to interconnect. Each layer performs a specific task, passing data to the next layer. Data moves down the layers at the source and up at the destination, with each layer adding header information. This layered approach separates functions and makes the network easier to manage and troubleshoot. The TCP/IP model is also discussed as an alternative networking framework.
ELEC2 - Lecture 1
This document contains summaries of key topics related to Windows Server management:
1. It describes the seven layers of the OSI model and provides examples of the functions of each layer.
2. It also discusses common networking terms like hubs, bridges, routers, and gateways and explains how they relate to the OSI model layers.
3. Finally, it briefly introduces the concept of subnet masks and their role in defining the network and host portions of an IP address.
OSI MODEL
The OSI model defines a standard approach to network communication with 7 layers - physical, data link, network, transport, session, presentation and application. Each layer has a specific function, with the lower layers focusing on physical connectivity and error checking and the upper layers providing services to applications. Information is encapsulated as it moves down the layers and headers are added before being de-encapsulated as it moves up the layers at the receiving end. The model separates network functions and allows components from different vendors to work together.
Lecture2
The document discusses the OSI model, which is a standard networking framework that defines seven layers of abstraction to establish communication between devices. The seven layers are physical, data link, network, transport, session, presentation, and application. Each layer provides services to the layer above it and receives services from the layer below it. The model separates networking functions and standardizes the implementation of network protocols.
Chapter#4
The document discusses protocols and the TCP/IP suite. It provides an overview of the layers of the TCP/IP protocol stack including the physical, network access, internet, transport, and application layers. It also describes common TCP/IP applications like SMTP, FTP, and TELNET. The document then compares the OSI model layers to the TCP/IP layers and discusses key internetworking terms.
Osi reference model in Networking
Osi reference model in Networking
for more visit these links
[1] - http://www.newtutorialslab.com/
[2] - http://www.ansmachine.net/
OSI Model - Open Systems Interconnection
The Open Systems Interconnection (OSI) reference model has served as the most basic elements of computer networking since the inception in 1984. The OSI Reference Model is based on a proposal developed by the International Standards Organization (ISO).
Osi model 1
The document describes the OSI model, which is a standard networking framework that defines 7 layers of communication. The physical layer deals with physical communication and data transmission over a medium. The data link layer handles frame creation and error checking. The network layer implements routing and logical addressing. The transport layer provides reliable data delivery and flow control between applications. The session layer manages dialogues and connections between devices. The presentation layer defines data formats. The application layer supports application software and programs. Overall, the OSI model provides a layered approach to network communication and data transfer.
Osi model or open system interconnection by MHM
OSI Model defines and is used to understand – How data is transferred from one computer to another in a computer network?
Learn computer network layers or OSI layers in a computer network, OSI Model, OSI reference model or open system interconnection model or networking model including Application Layer, Presentation Layer, Session Layer, Transport Layer, Network Layer, Data Link Layer and Physical layer. Definition, Function, and use of the OSI network model. Protocols in computer network layers of OSI model.
Osi model
The document discusses the OSI model, which is a standard networking framework that defines 7 layers of abstraction to establish communication between devices. The 7 layers are physical, data link, network, transport, session, presentation, and application layers. Each layer provides services to the layer above it and receives services from the layer below it. Data moves down the layers as it is encapsulated with protocol information and back up as headers are stripped at the receiving end. The model separates networking functions and standardizes how systems communicate over a network.
Osi Model
The International Standards Organization created the Open Systems Interconnection model to allow diverse systems to communicate across networks. The seven-layer OSI model provides guidelines for developing universally compatible networking protocols, with each layer defining a segment of the process of moving information across a network. The physical layer coordinates transmission over a physical medium, while the data link layer delivers data units without errors. The network layer handles source-to-destination delivery across multiple links, and the transport layer provides process-to-process delivery of entire messages.
A Technical Seminar on OSI model
The document discusses a technical seminar on the OSI model. It describes the seven layers of the OSI model, including the physical, data link, network, transport, session, presentation and application layers. It explains the functions of each layer and how they interact to exchange data and deliver messages from source to destination across networks.
0 presentacion de introduccion
The document discusses the 7 layers of the OSI reference model and their functions:
1. The physical layer defines the procedures for transmitting data over a network wire, including placing data on the wire and receiving data sent over the wire.
2. The data link layer contains the rules for sending and receiving data over a local area network (LAN).
3. The network layer handles routing data between networks, determining the best route for transmitting data between computers that may be in different parts of the world.
4. The transport layer manages how data is sent and received in a communication session, including breaking data into pieces, numbering them, and reassembling them in the proper order.
5. The
Network session 1 OSI Model
The document summarizes the seven layers of the OSI model. It describes the functions of each layer, including the application layer for facilitating network communication, the presentation layer for data formatting, the session layer for establishing and terminating sessions, the transport layer for packet resending and error handling, the network layer for routing and addressing, the data link layer for preparing data for transmission, and the physical layer for defining the physical network components and signals.
OSI model
The document summarizes the seven-layer OSI model. It describes each layer from one to seven, including examples of protocols and functions. The seven layers are: physical, data link, network, transport, session, presentation, and application. The physical layer deals with media and signal transmission. The data link layer handles physical addressing, MAC, and converting packets to frames. The network layer provides logical addressing, routing, and path determination. The transport layer manages segmentation, flow control, error control, and connection transmission. The session layer establishes and manages connections between applications. The presentation layer translates between data representation formats. And the application layer supports end-user processes and application-specific protocols.
OSI & TCP model
The document discusses the OSI and TCP/IP models for networking. It describes the seven layers of the OSI model - physical, data link, network, transport, session, presentation, and application layers. It also outlines the four layers of the TCP/IP model - application, transport, internet, and network interface layers. Each layer has a specific function, with the physical layer concerned with transmitting raw data and the application layer allowing direct interaction between software and users. The models provide frameworks for understanding how data moves between devices on a network.
OSI model
The document discusses the Open Systems Interconnection (OSI) model, which defines seven layers for data communication between any two systems. The seven layers are the physical, data link, network, transport, session, presentation, and application layers. Each layer has a specific role, with the physical layer concerned with bit transmission and the application layer dealing with high-level services like email. The OSI model allows for flexible and robust network architecture design.
Osi reference model
The document summarizes the seven layers of the OSI reference model:
1. The physical layer defines electrical and physical specifications for transmitting data across a medium.
2. The data link layer provides access to the network media and uses MAC addresses to reliably transmit data across a physical link.
3. The network layer defines logical addressing, routing, and packet fragmentation to enable end-to-end delivery of packets across networks.
OSI Model
The document discusses the seven-layer Open Systems Interconnection (OSI) model for data communication between networked systems. It describes each layer of the OSI model including: the physical layer which deals with transmission and signaling of raw bit streams over a communication channel; the data link layer which transforms the physical layer into a reliable link; the network layer which is responsible for logical addressing and routing of packets across multiple networks; the transport layer which ensures complete and error-free delivery of message segments; the session layer which establishes and synchronizes interactions between systems; the presentation layer which formats data for transmission; and the application layer which provides user interfaces and services. Each layer uses the services of lower layers and provides services to higher layers.
OSI model
The OSI model defines a seven-layer framework for networking protocols. The seven layers are the physical layer, data link layer, network layer, transport layer, session layer, presentation layer, and application layer. Each layer provides services to the layer above it and receives services from the layer below it. The physical layer transmits raw bits of data and defines electrical and physical specifications. The upper layers provide increasing abstraction from the underlying hardware.
Viloria osi layer4-7
The document discusses the Open Systems Interconnection (OSI) reference model, which introduced standards for network communication. The OSI model organizes network functions into seven layers, with each layer building on the services provided by the previous layer. Layers 1-4 deal with flow of data through the network, while layers 5-7 deal with services for applications. The model helps ensure compatibility between different network technologies.
OSI Model
The document summarizes the seven layers of the OSI model:
1) Application layer - Contains protocols like HTTP and FTP that applications use to transfer files and browse the web.
2) Presentation layer - Converts application data into binary and performs encryption/decryption.
3) Session layer - Manages connections by allowing applications on different computers to communicate.
4) Transport layer - Controls reliability through techniques like segmentation, flow control and error control.
5) Network layer - Handles logical addressing and routing of data packets between different networks.
6) Data link layer - Performs physical and logical addressing to transmit data packets to adjacent nodes.
7) Physical layer - Moves data in the form of electromagnetic
Arte hispanomusulmán (Introducción)
Este documento presenta una breve introducción al arte hispanomusulmán en Al-Ándalus. Explica que el arte musulmán estaba al servicio de la fe y el poder político y era anicónico, sin representaciones humanas. Describe características de la arquitectura como su eclecticismo, uso de materiales naturales y elementos como arcos, columnas y cúpulas. Finalmente, define vocabulario arquitectónico como alcazaba, alfiz y azulejo.
Correccion de n
El documento presenta una introducción a los ensayos geotécnicos in situ, enfocándose en el Ensayo de Penetración Estándar (SPT). Explica que el SPT mide la resistencia a la penetración mediante la hinca dinámica de un sacamuestras, y que su resultado se expresa como el número de golpes (N) necesarios para cada intervalo de penetración. También describe las correcciones aplicadas a N para obtener valores normalizados como N60 o (N1)60, y cómo el SPT se puede usar para estimar par
More Related Content
What's hot
OSI MODEL
The OSI model defines a standard approach to network communication with 7 layers - physical, data link, network, transport, session, presentation and application. Each layer has a specific function, with the lower layers focusing on physical connectivity and error checking and the upper layers providing services to applications. Information is encapsulated as it moves down the layers and headers are added before being de-encapsulated as it moves up the layers at the receiving end. The model separates network functions and allows components from different vendors to work together.
Lecture2
The document discusses the OSI model, which is a standard networking framework that defines seven layers of abstraction to establish communication between devices. The seven layers are physical, data link, network, transport, session, presentation, and application. Each layer provides services to the layer above it and receives services from the layer below it. The model separates networking functions and standardizes the implementation of network protocols.
Chapter#4
The document discusses protocols and the TCP/IP suite. It provides an overview of the layers of the TCP/IP protocol stack including the physical, network access, internet, transport, and application layers. It also describes common TCP/IP applications like SMTP, FTP, and TELNET. The document then compares the OSI model layers to the TCP/IP layers and discusses key internetworking terms.
Osi reference model in Networking
Osi reference model in Networking
for more visit these links
[1] - http://www.newtutorialslab.com/
[2] - http://www.ansmachine.net/
OSI Model - Open Systems Interconnection
The Open Systems Interconnection (OSI) reference model has served as the most basic elements of computer networking since the inception in 1984. The OSI Reference Model is based on a proposal developed by the International Standards Organization (ISO).
Osi model 1
The document describes the OSI model, which is a standard networking framework that defines 7 layers of communication. The physical layer deals with physical communication and data transmission over a medium. The data link layer handles frame creation and error checking. The network layer implements routing and logical addressing. The transport layer provides reliable data delivery and flow control between applications. The session layer manages dialogues and connections between devices. The presentation layer defines data formats. The application layer supports application software and programs. Overall, the OSI model provides a layered approach to network communication and data transfer.
Osi model or open system interconnection by MHM
OSI Model defines and is used to understand – How data is transferred from one computer to another in a computer network?
Learn computer network layers or OSI layers in a computer network, OSI Model, OSI reference model or open system interconnection model or networking model including Application Layer, Presentation Layer, Session Layer, Transport Layer, Network Layer, Data Link Layer and Physical layer. Definition, Function, and use of the OSI network model. Protocols in computer network layers of OSI model.
Osi model
The document discusses the OSI model, which is a standard networking framework that defines 7 layers of abstraction to establish communication between devices. The 7 layers are physical, data link, network, transport, session, presentation, and application layers. Each layer provides services to the layer above it and receives services from the layer below it. Data moves down the layers as it is encapsulated with protocol information and back up as headers are stripped at the receiving end. The model separates networking functions and standardizes how systems communicate over a network.
Osi Model
The International Standards Organization created the Open Systems Interconnection model to allow diverse systems to communicate across networks. The seven-layer OSI model provides guidelines for developing universally compatible networking protocols, with each layer defining a segment of the process of moving information across a network. The physical layer coordinates transmission over a physical medium, while the data link layer delivers data units without errors. The network layer handles source-to-destination delivery across multiple links, and the transport layer provides process-to-process delivery of entire messages.
A Technical Seminar on OSI model
The document discusses a technical seminar on the OSI model. It describes the seven layers of the OSI model, including the physical, data link, network, transport, session, presentation and application layers. It explains the functions of each layer and how they interact to exchange data and deliver messages from source to destination across networks.
0 presentacion de introduccion
The document discusses the 7 layers of the OSI reference model and their functions:
1. The physical layer defines the procedures for transmitting data over a network wire, including placing data on the wire and receiving data sent over the wire.
2. The data link layer contains the rules for sending and receiving data over a local area network (LAN).
3. The network layer handles routing data between networks, determining the best route for transmitting data between computers that may be in different parts of the world.
4. The transport layer manages how data is sent and received in a communication session, including breaking data into pieces, numbering them, and reassembling them in the proper order.
5. The
Network session 1 OSI Model
The document summarizes the seven layers of the OSI model. It describes the functions of each layer, including the application layer for facilitating network communication, the presentation layer for data formatting, the session layer for establishing and terminating sessions, the transport layer for packet resending and error handling, the network layer for routing and addressing, the data link layer for preparing data for transmission, and the physical layer for defining the physical network components and signals.
OSI model
The document summarizes the seven-layer OSI model. It describes each layer from one to seven, including examples of protocols and functions. The seven layers are: physical, data link, network, transport, session, presentation, and application. The physical layer deals with media and signal transmission. The data link layer handles physical addressing, MAC, and converting packets to frames. The network layer provides logical addressing, routing, and path determination. The transport layer manages segmentation, flow control, error control, and connection transmission. The session layer establishes and manages connections between applications. The presentation layer translates between data representation formats. And the application layer supports end-user processes and application-specific protocols.
OSI & TCP model
The document discusses the OSI and TCP/IP models for networking. It describes the seven layers of the OSI model - physical, data link, network, transport, session, presentation, and application layers. It also outlines the four layers of the TCP/IP model - application, transport, internet, and network interface layers. Each layer has a specific function, with the physical layer concerned with transmitting raw data and the application layer allowing direct interaction between software and users. The models provide frameworks for understanding how data moves between devices on a network.
OSI model
The document discusses the Open Systems Interconnection (OSI) model, which defines seven layers for data communication between any two systems. The seven layers are the physical, data link, network, transport, session, presentation, and application layers. Each layer has a specific role, with the physical layer concerned with bit transmission and the application layer dealing with high-level services like email. The OSI model allows for flexible and robust network architecture design.
Osi reference model
The document summarizes the seven layers of the OSI reference model:
1. The physical layer defines electrical and physical specifications for transmitting data across a medium.
2. The data link layer provides access to the network media and uses MAC addresses to reliably transmit data across a physical link.
3. The network layer defines logical addressing, routing, and packet fragmentation to enable end-to-end delivery of packets across networks.
OSI Model
The document discusses the seven-layer Open Systems Interconnection (OSI) model for data communication between networked systems. It describes each layer of the OSI model including: the physical layer which deals with transmission and signaling of raw bit streams over a communication channel; the data link layer which transforms the physical layer into a reliable link; the network layer which is responsible for logical addressing and routing of packets across multiple networks; the transport layer which ensures complete and error-free delivery of message segments; the session layer which establishes and synchronizes interactions between systems; the presentation layer which formats data for transmission; and the application layer which provides user interfaces and services. Each layer uses the services of lower layers and provides services to higher layers.
OSI model
The OSI model defines a seven-layer framework for networking protocols. The seven layers are the physical layer, data link layer, network layer, transport layer, session layer, presentation layer, and application layer. Each layer provides services to the layer above it and receives services from the layer below it. The physical layer transmits raw bits of data and defines electrical and physical specifications. The upper layers provide increasing abstraction from the underlying hardware.
Viloria osi layer4-7
The document discusses the Open Systems Interconnection (OSI) reference model, which introduced standards for network communication. The OSI model organizes network functions into seven layers, with each layer building on the services provided by the previous layer. Layers 1-4 deal with flow of data through the network, while layers 5-7 deal with services for applications. The model helps ensure compatibility between different network technologies.
OSI Model
The document summarizes the seven layers of the OSI model:
1) Application layer - Contains protocols like HTTP and FTP that applications use to transfer files and browse the web.
2) Presentation layer - Converts application data into binary and performs encryption/decryption.
3) Session layer - Manages connections by allowing applications on different computers to communicate.
4) Transport layer - Controls reliability through techniques like segmentation, flow control and error control.
5) Network layer - Handles logical addressing and routing of data packets between different networks.
6) Data link layer - Performs physical and logical addressing to transmit data packets to adjacent nodes.
7) Physical layer - Moves data in the form of electromagnetic
What's hot (20)
Viewers also liked
Arte hispanomusulmán (Introducción)
Este documento presenta una breve introducción al arte hispanomusulmán en Al-Ándalus. Explica que el arte musulmán estaba al servicio de la fe y el poder político y era anicónico, sin representaciones humanas. Describe características de la arquitectura como su eclecticismo, uso de materiales naturales y elementos como arcos, columnas y cúpulas. Finalmente, define vocabulario arquitectónico como alcazaba, alfiz y azulejo.
Correccion de n
El documento presenta una introducción a los ensayos geotécnicos in situ, enfocándose en el Ensayo de Penetración Estándar (SPT). Explica que el SPT mide la resistencia a la penetración mediante la hinca dinámica de un sacamuestras, y que su resultado se expresa como el número de golpes (N) necesarios para cada intervalo de penetración. También describe las correcciones aplicadas a N para obtener valores normalizados como N60 o (N1)60, y cómo el SPT se puede usar para estimar par
2.2.2b6 medio de tx- red telefonica-review
The document discusses the structure and components of the public switched telephone system. It covers topics like the local loop using technologies like modems, ADSL, and wireless; trunks connecting switching offices; switching offices; and multiplexing techniques like frequency division, wavelength division, and time division multiplexing used to increase bandwidth capacity on telephone lines. It also briefly mentions circuit switching, message switching, and packet switching network architectures.
Corrección seminario 2
El documento describe los 6 pasos para realizar una búsqueda bibliográfica sobre el uso de antibióticos y antiinflamatorios para la gingivitis y periodontitis: 1) acceder a la base de datos Dialnet, 2) realizar una búsqueda con términos clave, 3) seleccionar un artículo pero solo acceder a un resumen, 4) usar Fama+ para buscar el artículo completo usando el ISSN, 5) encontrar la versión electrónica del artículo con los detalles de página y volumen, 6)
Pretérito Indefinido o Simple
Con esta presentación puedes aprender el Pretérito Indefinido en español para los verbos regulares e irregulares. Además la presentación tiene una pequeña explicación sobre los indicadores temporales que acompañan a este tiempo verbal.
La catedral de Toledo
La presentación explica brevemente la importancia histórica de la ciudad de Toledo. Posteriormente muestra algunos de los elementos y lugares más importantes de la Catedral Primada de España.
La casa (el mobiliario)
El documento describe los muebles y elementos de diferentes habitaciones de una casa como dormitorios, baño, cocina, salón, terraza, pasillo y garaje, enumerando y ubicando cada elemento en un diagrama.
2.3.2c formato dimensionamiento de materiales
El documento describe los pasos para diseñar la infraestructura y dimensionar la red, incluyendo ubicar cuartos de equipos y telecomunicaciones, determinar rutas de cableado, categoría de red, y puntos de red. También incluye listados de inventario por edificio y total que enumeran los elementos de cableado estructurado necesarios como paneles de parcheo, administradores de red, racks, cableado y accesorios.
Ta 01 taller recursos did_cticos aplicados en pizarra digital interactiva en ...
Este documento describe un taller sobre el uso de pizarras digitales interactivas en la enseñanza universitaria. El taller tuvo como objetivos aprender sobre las aplicaciones pedagógicas de las pizarras digitales, conocer el software ActivInspire y explorar o diseñar recursos didácticos digitales usando una pizarra digital. El taller incluyó sesiones sobre las ventajas de las TIC en la educación, usos de la pizarra digital, ejemplos de recursos y actividades prácticas para crear recursos usando el software ActivIn
Descarga activ inspire_prodel (2)
El documento proporciona instrucciones en 10 pasos para descargar e instalar el software ActivInspire de Promethean. Incluye cómo registrarse en la página web de PrometheanPlanet, descargar los recursos e instalador, obtener un código de activación utilizando el número de serie de la pizarra o software anterior, e instalar los recursos descargados.
Ejercicios
El documento proporciona instrucciones para dos sesiones de ejercicios sobre el uso de una pizarra digital interactiva (PDI) en el aula. La primera sesión incluye ejercicios como la instalación y calibración del programa PDI, la visualización de videos y documentos PDF, y el dibujo y edición de figuras geométricas, texto y operaciones matemáticas. La segunda sesión cubre la creación y edición de presentaciones digitales, la importación y trabajo con imágenes y actividades interactivas, y el acceso a recurs
Los números (del 21 al 50)
El documento lista los números del 21 al 50 en español, seguido de la conjugación del verbo "tener" en sus formas personal.
Pedir y comprender información en clase de español
Este documento presenta varias frases comunes en español relacionadas con pedir permiso para ir al baño o beber agua, expresar falta de comprensión, deletrear palabras, pronunciar palabras, preguntar la página en la que se encuentran, pedir que alguien hable más despacio o más alto, y escribir una palabra en la pizarra. El documento proporciona estas frases en español junto con su traducción al inglés para ayudar a los estudiantes a familiarizarse con vocabulario y expresiones básicas.
Estar + gerundio
Este documento describe diferentes tipos de verbos regulares e irregulares en español. Explica cómo se forma el gerundio de los verbos regulares y presenta tres grupos principales de verbos irregulares que cambian su vocal o añaden una "y". También cubre los verbos reflexivos y provee enlaces a blogs adicionales sobre aprendizaje de español.
Conversación telefónica (haciendo planes)
Daniel llama a Ana para invitarla a ver una película con amigos a las 20:00. Aunque hay otra película a las 17:00 sin entradas disponibles, la de las 20:00 parece más divertida con actores conocidos. Ana acepta la invitación de Daniel a ver la película más tarde.
Conversaciones básicas (saludos y presentaciones)
Con esta presentación puedes aprender cómo saludar y cómo presentar a otra persona. Se utilizan las dos formas: tú y usted.
Información personal
Este documento presenta un ejercicio de autopresentación en el que se enseñan las preguntas y respuestas básicas para completar una ficha personal. Se muestran las preguntas típicas para solicitar el nombre, apellidos, nacionalidad, dirección, profesión, código postal, teléfono y correo electrónico, junto con ejemplos de cómo responder a cada una. Al final, se incluye un ejemplo completo de una presentación personal.
Saludar y preguntar
Este documento proporciona saludos y preguntas comunes en polaco para iniciar una conversación, así como respuestas positivas y negativas comunes para indicar cómo se está. Ofrece saludos informales como "¿Qué tal?" y "¿Cómo estás?" para dirigirse a alguien de manera informal y "¿Qué tal está usted?" y "¿Cómo está usted?" de manera más formal. Además, incluye respuestas positivas como "¡Fenomenal!" y "¡Muy bien!" y negativas como "¡Regular!" "¡Mal
Descripción de estados animicos
Este documento describe el uso del verbo "estar" para expresar estados emocionales temporales mediante el uso de adjetivos. Explica que "estar" se usa para expresar cómo se sienten las personas en un momento dado, como estar feliz, enfadado, aburrido o nervioso. También resume tres reglas básicas sobre el uso de adjetivos en español: el adjetivo va detrás del sustantivo, tiene el mismo género y número que el sustantivo.
Estar + gerundio (una fiesta de cumpleaños)
Una sencilla historia nos explica cómo utlizar esta construcción en español. ¡Es muy fácil! ¿Te atreves?
Viewers also liked (20)
Ta 01 taller recursos did_cticos aplicados en pizarra digital interactiva en ...
Ta 01 taller recursos did_cticos aplicados en pizarra digital interactiva en ...
Pedir y comprender información en clase de español
Pedir y comprender información en clase de español
Similar to 1.3.2a modelos de referencia
Wmcn ch.4
This document summarizes key concepts about protocols and the TCP/IP protocol suite from a chapter in a networking textbook. It discusses the key features of protocols including syntax, semantics, and timing. It then describes the various layers of the TCP/IP model including the physical, network access, internet, transport, and application layers. Common TCP/IP applications like SMTP, FTP, and TELNET are also summarized. The document compares the OSI and TCP/IP models and discusses reasons for TCP/IP's dominance.
komdat1
The document discusses several topics related to data communication protocols and architectures:
1. A simplified model of data communication includes elements like the source, transmitter, transmission system, receiver, and destination.
2. Key communication tasks involve flow control, error detection, security, message formatting, and more.
3. Modern communication systems strive for reliability and efficiency by stripping out unnecessary overhead and error control.
4. Protocols like Frame Relay and ATM aim to balance overhead with performance at varying data rates.
komdat1
The document discusses several topics related to data communication protocols and architectures:
1. A simplified model of data communication includes elements like the source, transmitter, transmission system, receiver, and destination.
2. Key communication tasks involve flow control, error detection, security, message formatting, and more.
3. Protocols help break down the complex task of data communication into layers, with each layer providing functions for the layer above and relying on the layer below.
4. Characteristics of protocols include whether they are direct or indirect, monolithic or structured, symmetric or asymmetric, and standardized or non-standard.
Lalit bhati ppt osi
The document discusses the OSI model, which divides networking into 7 layers (physical, data link, network, transport, session, presentation, application) and standardizes network communication. It established the need for standards to ensure interoperability between different network implementations and describes the basic functions of each OSI layer and how data is encapsulated as it moves down the layers of the model.
Presentation5
Allows applications on different systems to communicate by defining rules for exchanging data between them. It uses a modular approach that breaks tasks into subtasks handled by separate modules, making applications easier to develop and networks more flexible. The three-layer TCP/IP and seven-layer OSI models both describe a standardized architectural approach to protocol design.
Ccna notes
The document provides information about CCNA certification options and the OSI model. It discusses two options for obtaining the CCNA certification, recommends taking a single exam, and includes a table listing common network device icons. It then covers the seven layers of the OSI model in detail, providing descriptions, examples, and review questions for each layer. Finally, it discusses the TCP/IP protocol suite and compares it to the OSI model, listing several example protocols like FTP, TFTP, and HTTP.
Ccna notes
The document provides information about the CCNA certification options and Cisco networking concepts including the OSI model. It can be used to study for the CCNA exam. There are two options to obtain the CCNA: pass a single exam or two exams. The document then explains the OSI model in detail including mnemonics to remember the layer names and summaries of what occurs at each layer of the OSI model to help understand how data flows through a network.
Ccna notes
The document provides an overview of Cisco's CCNA certification options and networking concepts including the OSI model. It discusses that Cisco offers a single exam or two exam option for CCNA certification. It then defines the OSI model layers and their purposes, with a focus on the lower layers including physical, data link and network layers. Sample exam questions are also provided related to the OSI model and protocols.
Lecture 03
This document discusses the OSI model and its 7 layers. It describes the layered architecture approach of breaking communication tasks into simpler sub-tasks handled by individual layers. Each layer provides services to the layer above and relies on the layer below. The layers are the physical, data link, network, transport, session, presentation, and application layers. Each layer has specific responsibilities for handling data transmission and communication functions.
OSI Model of Networking
A presentation on the OSI model. Describes the need for a layered approach, and discusses the function of each of the layers.
Ccent notes part 1
The document provides notes on networking fundamentals from CCENT/CCNA ICND1 Official Exam Certification Guide. It discusses the TCP/IP and OSI networking models, including their layers and functions. It also covers fundamentals of local area networks (LANs) such as Ethernet standards, speeds, cable types and maximum lengths. Common Ethernet standards include 10BASE-T, 100BASE-TX, 1000BASE-SX, 1000BASE-LX and 1000BASE-T.
OSI reference Model
This topic explains the Open system interconnect model, and simply explains each of the seven layers in a way that is understandable by all
OSI(Open System Interconnection) model
Open Systems Interconnection (OSI) is a set of internationally recognized, non-proprietary standards for networking and for operating system involved in networking functions.
Ncsweek2 osi model
The document discusses network structures, standards, and protocols. It describes Local Area Networks (LANs) that serve a home or building, and Wide Area Networks (WANs) that connect separated LANs over long distances, such as the Internet. The OSI model breaks communication down into seven layers, from the physical layer dealing with wiring to the application layer providing services to software. Similarly, the TCP/IP model organizes networking functions into layers, providing a framework but not strictly implementing the OSI model. Standards organizations develop agreed protocols to specify product and service designs for interoperable networking.
Communication Networks 1
Discuss Data Communications & TCP\IP protocol & The function of each layer & little preview of OSI Model
Network Fundamentals: OSI Model
The OSI reference model defines a 7-layer framework for how information from an application is transmitted across a network. It specifies that data moves from the application layer, through various layers that prepare and transmit the data, to the physical layer which transmits signals across a medium. The layers include application, presentation, session, transport, network, data link, and physical. Protocols like TCP/IP map to these layers to enable communication between devices.
OSI (open systems interconnection) Model
The Open Systems Interconnection model (OSI) is a conceptual model that characterizes and
standardizes the internal functions of a communication system by partitioning it into abstraction layers.
The OSI Model is a conceptual, seven-layered model of how networks work. It tells us that how data is
going through one computer to another computer, and also it simplifies to troubleshoot the network
issues.
Learn basics of ip addressing
The document provides an overview of IP addressing and networking concepts. It begins with an agenda that includes layers, TCP/IP layers, what IP is, IPv4 structure, binary basics, IP classes, subnetting and tools. It then discusses layers models like OSI and TCP/IP, describing each layer. It defines what an IP is, the structure of an IPv4 address in binary, and common networking terms like ports, protocols, and IP classes. The document provides a high-level introduction to fundamental IP networking concepts.
chapter 4.pptx
The document discusses network models and compares the OSI model and TCP/IP model. It provides details on the layers of the OSI model including the 7 layers from physical to application layer. It describes the functions of each layer such as physical dealing with raw bit transmission, data link framing bits into frames, network routing packets, transport ensuring reliable data delivery, session controlling connections, presentation translating between systems, and application providing user interfaces. It also summarizes the similarities and differences between the OSI and TCP/IP models.
what is OSI model
The OSI model partitions network communication into seven abstraction layers, with each layer defining a class of functionality. Layer 1 defines physical aspects like cables and signals. Layer 2 handles data flow and error checking. Layers 3 through 7 handle higher-level functions, with layer 3 defining routing and switching, layer 4 ensuring reliable data transfer, layer 5 managing sessions, layer 6 translating data, and layer 7 supporting direct user interaction. The model provides a standard framework for network communication that supports both connection-oriented and connectionless services and facilitates interoperability between different technologies.
Similar to 1.3.2a modelos de referencia (20)
More from luishdiaz
2.3.2b formato para levantamiento de información
El documento describe la información necesaria para diseñar una red local (LAN) en un edificio, incluyendo planos del edificio, ubicaciones de áreas de trabajo y listados que identifican los servicios requeridos por cada usuario. También presenta un formato de listado para registrar información específica por edificio como el piso, oficina, usuario, servicios requeridos, longitud del área de trabajo y número de puerto asignado.
2.3.2a levantamiento información y planos
El documento proporciona los pasos a seguir para implementar una red de área local (LAN), incluyendo conocer las normas, realizar un levantamiento de información, seleccionar el tipo y topología de LAN, diseñar el cableado e infraestructura, e instalar la red. También presenta un plano de la distribución de la red en un edificio y especificaciones sobre los componentes de hardware requeridos.
2.3.1 introduccion al diseño de una lan
Princupios de diseño de una LAN desde el levantamiento de la información hasta la certificación de la red.
2.2.1b teoria de comunicaciones
Teoria de comunicaciones para la transmision de datos a travéz de un determinado medio de transmisión. Se plantean las teorias de Shannon, Nyquist y Fourier para el análisis teorico.
2.1.1 conceptos basicos de tx datos
This document discusses key concepts related to data transmission. It defines common terminology used in transmission including transmitter, receiver, medium, direct/point-to-point/multi-point links, and simplex/half-duplex/full-duplex transmission. It also covers frequency domain concepts such as continuous/discrete signals, periodic/aperiodic signals, bandwidth, and how data rate relates to bandwidth. Finally, it compares analog and digital transmission and some common transmission impairments like attenuation, delay distortion, and noise.
2.2.2c medios de tx-tv cable
El documento describe la historia y funcionamiento de la televisión por cable. Originalmente, se usó para llevar la señal de televisión a áreas alejadas de las torres de transmisión mediante el uso de una antena comunal y cables coaxiales. Ahora, los cables también transportan señales de Internet de alta velocidad a los hogares a través de redes híbridas de fibra óptica y cable coaxial.
2.2.2b5 medio de tx- red telefonica- conmutac
Los sistemas de conmutación utilizados por las redes telefónicas publicas conmutados del sistema telefónico usado como medio de transmision para datos.
2.2.2b4 medio de tx- red telefonica-tks y mux
Las troncales y la tecnologia de multiplexaje de las redes telefónicas públicas conmutada utilizadas como medio de transmisión de datos.
2.2.2b3 medio de tx- red telefonica-cto.local
El bucle o lazo local en la transmision de datos por la red telefónica pública. El modem. ADSL. Bucle local inalambrico.
2.2.2b2 medio de tx- red telefonica-politica
Introducción del sistema telefónico utilizado como medio de transmision de datos- fundamentos - Politicas.
2.2.2b1 medio de tx- red telefonica-introducción
El documento describe la estructura del sistema telefónico público conmutado. Se explica que originalmente consistía en cables individuales entre teléfonos y una oficina de conmutación central, pero que evolucionó a una red jerárquica de oficinas de conmutación locales e interurbanas conectadas por troncales. Actualmente, los circuitos locales son análogos mientras que las troncales y conmutadores son digitales, consistiendo el sistema en circuitos locales, troncales y oficinas de conmutación.
2.2.2a medios de tx guiados
Este documento resume los principales medios de transmisión guiados, incluyendo par trenzado, cable coaxial y fibra óptica. Explica que el par trenzado es el medio más antiguo y común, mientras que la fibra óptica ofrece el mayor ancho de banda y velocidad de transmisión. También compara las categorías 3 y 5 de cableado UTP, y describe la construcción y ventajas del cable coaxial frente al par trenzado. Finalmente, resume brevemente la historia y desarrollo de la fibra óptica como el med
2.2.3a medios de tx no guiados
Este documento describe varios temas relacionados con la transmisión de datos inalámbrica. Explica el espectro electromagnético y cómo se asignan las diferentes bandas de frecuencias. También describe diferentes métodos de transmisión inalámbrica como la radiotransmisión, transmisión por microondas e infrarrojos. Finalmente, discute algunas aplicaciones y ventajas de estas tecnologías de comunicación inalámbrica.
2.2.3b medios de tx red movil celular
Medio de transmision de telefonia movil celular que es utilizado para transmision de datos y en la medida en que las generaciones de telefonia celular se va desarrollando va incrementando la velocidad de datos que puede transportar.
2.2.3c medios de tx sistema satelital
Los sistemas de comunicación inalambricos satelitales sirven para transmision de datos, que no sean afectados por el retardo que presenta un enlace satelital.
2.2.4 cableado estructurado
El documento describe los componentes clave de un sistema de cableado estructurado, incluyendo el cableado horizontal, áreas de trabajo, cuarto de telecomunicaciones y estándares. Un cableado estructurado proporciona una solución segura, modular y de larga duración para interconectar dispositivos de red de manera administrable.
2.1.3 bases teóricas de comunicaciones
Los canales de los enlaces entre las máquinas computarizadas que comforman una red, tienen limitaciones por su naturaleza física pero por medios tecnologicos se puede mejorar su eficiencia.
2.1.2 introducción capa fisica
La capa física representa la capa más baja en la jerarquía OSI. Define las interfaces mecánicas, eléctricas y de temporización con la red. Los medios de transmisión pueden ser guiados como alambre de cobre o fibra óptica, o no guiados como transmisiones inalámbricas. Ejemplos de sistemas de comunicación que usan estos medios son el sistema telefónico, sistemas inalámbricos y de televisión.
2.1.1 conceptos basicos de tx datos
This document discusses key concepts related to data transmission. It defines common terminology used in transmission including transmitter, receiver, medium, direct/point-to-point/multi-point links, and simplex/half-duplex/full-duplex transmission. It also covers frequency domain concepts such as continuous/discrete signals, periodic/aperiodic signals, bandwidth, and how data rate relates to bandwidth. Finally, it compares analog and digital transmission and some common transmission impairments like attenuation, delay distortion, and noise.
1.5.3 redes de difusion ethernet
Ethernet fue la primera red de área local implementada con éxito. Se originó en la Universidad de Hawaii en 1970 para conectar usuarios de islas remotas a una computadora central mediante radios de onda corta (ALOHANET). Posteriormente, Bob Metcalfe y David Boggs desarrollaron Ethernet en el laboratorio PARC de Xerox en 1976 utilizando un cable coaxial grueso que permitía a las computadoras escuchar el medio antes de transmitir para evitar interferencias, a diferencia de ALOHANET. Ethernet tuvo mucho éxito y llevó al desar
More from luishdiaz (20)
Recently uploaded
Beyond Degrees - Empowering the Workforce in the Context of Skills-First.pptx
Iván Bornacelly, Policy Analyst at the OECD Centre for Skills, OECD, presents at the webinar 'Tackling job market gaps with a skills-first approach' on 12 June 2024
Wound healing PPT
This document provides an overview of wound healing, its functions, stages, mechanisms, factors affecting it, and complications.
A wound is a break in the integrity of the skin or tissues, which may be associated with disruption of the structure and function.
Healing is the body’s response to injury in an attempt to restore normal structure and functions.
Healing can occur in two ways: Regeneration and Repair
There are 4 phases of wound healing: hemostasis, inflammation, proliferation, and remodeling. This document also describes the mechanism of wound healing. Factors that affect healing include infection, uncontrolled diabetes, poor nutrition, age, anemia, the presence of foreign bodies, etc.
Complications of wound healing like infection, hyperpigmentation of scar, contractures, and keloid formation.
Jemison, MacLaughlin, and Majumder "Broadening Pathways for Editors and Authors"
Jemison, MacLaughlin, and Majumder "Broadening Pathways for Editors and Authors"National Information Standards Organization (NISO)
This presentation was provided by Racquel Jemison, Ph.D., Christina MacLaughlin, Ph.D., and Paulomi Majumder. Ph.D., all of the American Chemical Society, for the second session of NISO's 2024 Training Series "DEIA in the Scholarly Landscape." Session Two: 'Expanding Pathways to Publishing Careers,' was held June 13, 2024.Stack Memory Organization of 8086 Microprocessor
The stack memory organization of 8086 microprocessor.
Temple of Asclepius in Thrace. Excavation results
The temple and the sanctuary around were dedicated to Asklepios Zmidrenus. This name has been known since 1875 when an inscription dedicated to him was discovered in Rome. The inscription is dated in 227 AD and was left by soldiers originating from the city of Philippopolis (modern Plovdiv).
How to Setup Warehouse & Location in Odoo 17 Inventory
In this slide, we'll explore how to set up warehouses and locations in Odoo 17 Inventory. This will help us manage our stock effectively, track inventory levels, and streamline warehouse operations.
Chapter wise All Notes of First year Basic Civil Engineering.pptx
Chapter wise All Notes of First year Basic Civil Engineering
Syllabus
Chapter-1
Introduction to objective, scope and outcome the subject
Chapter 2
Introduction: Scope and Specialization of Civil Engineering, Role of civil Engineer in Society, Impact of infrastructural development on economy of country.
Chapter 3
Surveying: Object Principles & Types of Surveying; Site Plans, Plans & Maps; Scales & Unit of different Measurements.
Linear Measurements: Instruments used. Linear Measurement by Tape, Ranging out Survey Lines and overcoming Obstructions; Measurements on sloping ground; Tape corrections, conventional symbols. Angular Measurements: Instruments used; Introduction to Compass Surveying, Bearings and Longitude & Latitude of a Line, Introduction to total station.
Levelling: Instrument used Object of levelling, Methods of levelling in brief, and Contour maps.
Chapter 4
Buildings: Selection of site for Buildings, Layout of Building Plan, Types of buildings, Plinth area, carpet area, floor space index, Introduction to building byelaws, concept of sun light & ventilation. Components of Buildings & their functions, Basic concept of R.C.C., Introduction to types of foundation
Chapter 5
Transportation: Introduction to Transportation Engineering; Traffic and Road Safety: Types and Characteristics of Various Modes of Transportation; Various Road Traffic Signs, Causes of Accidents and Road Safety Measures.
Chapter 6
Environmental Engineering: Environmental Pollution, Environmental Acts and Regulations, Functional Concepts of Ecology, Basics of Species, Biodiversity, Ecosystem, Hydrological Cycle; Chemical Cycles: Carbon, Nitrogen & Phosphorus; Energy Flow in Ecosystems.
Water Pollution: Water Quality standards, Introduction to Treatment & Disposal of Waste Water. Reuse and Saving of Water, Rain Water Harvesting. Solid Waste Management: Classification of Solid Waste, Collection, Transportation and Disposal of Solid. Recycling of Solid Waste: Energy Recovery, Sanitary Landfill, On-Site Sanitation. Air & Noise Pollution: Primary and Secondary air pollutants, Harmful effects of Air Pollution, Control of Air Pollution. . Noise Pollution Harmful Effects of noise pollution, control of noise pollution, Global warming & Climate Change, Ozone depletion, Greenhouse effect
Text Books:
1. Palancharmy, Basic Civil Engineering, McGraw Hill publishers.
2. Satheesh Gopi, Basic Civil Engineering, Pearson Publishers.
3. Ketki Rangwala Dalal, Essentials of Civil Engineering, Charotar Publishing House.
4. BCP, Surveying volume 1
RHEOLOGY Physical pharmaceutics-II notes for B.pharm 4th sem students
Physical pharmaceutics notes for B.pharm students
A Visual Guide to 1 Samuel | A Tale of Two Hearts
These slides walk through the story of 1 Samuel. Samuel is the last judge of Israel. The people reject God and want a king. Saul is anointed as the first king, but he is not a good king. David, the shepherd boy is anointed and Saul is envious of him. David shows honor while Saul continues to self destruct.
Walmart Business+ and Spark Good for Nonprofits.pdf
"Learn about all the ways Walmart supports nonprofit organizations.
You will hear from Liz Willett, the Head of Nonprofits, and hear about what Walmart is doing to help nonprofits, including Walmart Business and Spark Good. Walmart Business+ is a new offer for nonprofits that offers discounts and also streamlines nonprofits order and expense tracking, saving time and money.
The webinar may also give some examples on how nonprofits can best leverage Walmart Business+.
The event will cover the following::
Walmart Business + (https://business.walmart.com/plus) is a new shopping experience for nonprofits, schools, and local business customers that connects an exclusive online shopping experience to stores. Benefits include free delivery and shipping, a 'Spend Analytics” feature, special discounts, deals and tax-exempt shopping.
Special TechSoup offer for a free 180 days membership, and up to $150 in discounts on eligible orders.
Spark Good (walmart.com/sparkgood) is a charitable platform that enables nonprofits to receive donations directly from customers and associates.
Answers about how you can do more with Walmart!"
How to Make a Field Mandatory in Odoo 17
In Odoo, making a field required can be done through both Python code and XML views. When you set the required attribute to True in Python code, it makes the field required across all views where it's used. Conversely, when you set the required attribute in XML views, it makes the field required only in the context of that particular view.
HYPERTENSION - SLIDE SHARE PRESENTATION.
IT WILL BE HELPFULL FOR THE NUSING STUDENTS
IT FOCUSED ON MEDICAL MANAGEMENT AND NURSING MANAGEMENT.
HIGHLIGHTS ON HEALTH EDUCATION.
Mule event processing models | MuleSoft Mysore Meetup #47
Mule event processing models | MuleSoft Mysore Meetup #47
Event Link:- https://meetups.mulesoft.com/events/details/mulesoft-mysore-presents-mule-event-processing-models/
Agenda
● What is event processing in MuleSoft?
● Types of event processing models in Mule 4
● Distinction between the reactive, parallel, blocking & non-blocking processing
For Upcoming Meetups Join Mysore Meetup Group - https://meetups.mulesoft.com/mysore/YouTube:- youtube.com/@mulesoftmysore
Mysore WhatsApp group:- https://chat.whatsapp.com/EhqtHtCC75vCAX7gaO842N
Speaker:-
Shivani Yasaswi - https://www.linkedin.com/in/shivaniyasaswi/
Organizers:-
Shubham Chaurasia - https://www.linkedin.com/in/shubhamchaurasia1/
Giridhar Meka - https://www.linkedin.com/in/giridharmeka
Priya Shaw - https://www.linkedin.com/in/priya-shaw
BÀI TẬP BỔ TRỢ TIẾNG ANH LỚP 9 CẢ NĂM - GLOBAL SUCCESS - NĂM HỌC 2024-2025 - ...
BÀI TẬP BỔ TRỢ TIẾNG ANH LỚP 9 CẢ NĂM - GLOBAL SUCCESS - NĂM HỌC 2024-2025 - ...Nguyen Thanh Tu Collection
https://app.box.com/s/tacvl9ekroe9hqupdnjruiypvm9rdaneHow to deliver Powerpoint Presentations.pptx
"How to make and deliver dynamic presentations by making it more interactive to captivate your audience attention"
Benner "Expanding Pathways to Publishing Careers"
This presentation was provided by Rebecca Benner, Ph.D., of the American Society of Anesthesiologists, for the second session of NISO's 2024 Training Series "DEIA in the Scholarly Landscape." Session Two: 'Expanding Pathways to Publishing Careers,' was held June 13, 2024.
Recently uploaded (20)
Beyond Degrees - Empowering the Workforce in the Context of Skills-First.pptx
Beyond Degrees - Empowering the Workforce in the Context of Skills-First.pptx
Jemison, MacLaughlin, and Majumder "Broadening Pathways for Editors and Authors"
Jemison, MacLaughlin, and Majumder "Broadening Pathways for Editors and Authors"
B. Ed Syllabus for babasaheb ambedkar education university.pdf
B. Ed Syllabus for babasaheb ambedkar education university.pdf
How to Setup Warehouse & Location in Odoo 17 Inventory
How to Setup Warehouse & Location in Odoo 17 Inventory
Chapter wise All Notes of First year Basic Civil Engineering.pptx
Chapter wise All Notes of First year Basic Civil Engineering.pptx
RHEOLOGY Physical pharmaceutics-II notes for B.pharm 4th sem students
RHEOLOGY Physical pharmaceutics-II notes for B.pharm 4th sem students
Walmart Business+ and Spark Good for Nonprofits.pdf
Walmart Business+ and Spark Good for Nonprofits.pdf
Film vocab for eal 3 students: Australia the movie
Film vocab for eal 3 students: Australia the movie
Mule event processing models | MuleSoft Mysore Meetup #47
Mule event processing models | MuleSoft Mysore Meetup #47
BÀI TẬP BỔ TRỢ TIẾNG ANH LỚP 9 CẢ NĂM - GLOBAL SUCCESS - NĂM HỌC 2024-2025 - ...
BÀI TẬP BỔ TRỢ TIẾNG ANH LỚP 9 CẢ NĂM - GLOBAL SUCCESS - NĂM HỌC 2024-2025 - ...
1.3.2a modelos de referencia
- 1. Conceptos Previos William Stallings Data and Computer Communications
- 2. OSI - The Model A layer model Each layer performs a subset of the required communication functions Each layer relies on the next lower layer to perform more primitive functions Each layer provides services to the next higher layer Changes in one layer should not require changes in other layers
- 4. OSI as Framework for Standardization
- 6. Elements of Standardization Protocol specification Operates between the same layer on two systems May involve different operating system Protocol specification must be precise Format of data units Semantics of all fields allowable sequence of PCUs Service definition Functional description of what is provided Addressing Referenced by SAPs
- 7. OSI Layers (1) Physical Physical interface between devices Mechanical Electrical Functional Procedural Data Link Means of activating, maintaining and deactivating a reliable link Error detection and control Higher layers may assume error free transmission
- 8. OSI Layers (2) Network Transport of information Higher layers do not need to know about underlying technology Not needed on direct links Transport Exchange of data between end systems Error free In sequence No losses No duplicates Quality of service
- 9. OSI Layers (3) Session Control of dialogues between applications Dialogue discipline Grouping Recovery Presentation Data formats and coding Data compression Encryption Application Means for applications to access OSI environment
- 10. Use of a Relay
- 11. TCP/IP Protocol Suite Dominant commercial protocol architecture Specified and extensively used before OSI Developed by research funded US Department of Defense Used by the Internet
- 12. TCP/IP Protocol Architecture(1) Application Layer Communication between processes or applications End to end or transport layer (TCP/UDP/…) End to end transfer of data May include reliability mechanism (TCP) Hides detail of underlying network Internet Layer (IP) Routing of data
- 13. TCP/IP Protocol Architecture(2) Network Layer Logical interface between end system and network Physical Layer Transmission medium Signal rate and encoding
- 14. PDUs in TCP/IP
- 15. Some Protocols in TCP/IP Suite