100 Amazing safety slogans
•
0 likes•963 views
Safety Slogan is a short, striking and memorable phrase use to convey important safety information. Safety slogan is used in our workplaces to pass important safety information to the workers. It helps keep the workers in-check, helping them avoid unsafe acts and condition thereby reducing accident onsite. https://hsewatch.com/safety-slogan
Report
Share
Report
Share
Download to read offline
Recommended
Work at height safety
Fall hazard means a circumstance that exposes a worker in a workplace to a risk of a fall that is reasonably likely to cause injury to the worker or other person.
Assessing risks from working at height.
Common Fall Hazards at construction site.
Common Scaffold Hazards.
PERSONAL FALL PROTECTION.
Travel-Restraint Systems.
Fall-Arrest Systems.
Lifelines.
Scaffolding, also called scaffold or staging, is a temporary structure used to support a work crew and materials to aid in the construction, maintenance and repair of buildings, bridges and all other man made structures.
Working at height slides
The document provides information about working at heights training, including:
- The aims are to provide personnel working at heights with practical knowledge and application of safe practices to prevent injury.
- The objectives include identifying fall regulations and risks, demonstrating safety equipment use, and emergency response procedures.
- It discusses examples of working at heights, regulations and responsibilities to control fall risks, and the goals of reducing falls injuries.
Fire fighting presentation
The presentation discusses fire fighting and prevention. It covers the importance of fire training and history, causes of fire, the fire triangle and methods of extinguishing fires. It also discusses the classification of fires, types of fire extinguishers such as CO2 and AFFF extinguishers, and how to properly use them. The success of firefighting depends on well maintained equipment, training, and knowing which type of extinguisher to use for different fire classifications.
safety training
This document provides information about safety training. It discusses the importance of safety, causes of accidents, and how to prevent them. Some key points covered include:
- Safety is important to protect one's health and life. If body parts are lost, they cannot be replaced.
- Unsafe actions by workers account for 80% of accidents, while unsafe workplace conditions account for 18%. Natural disasters make up the remaining 2%.
- Accidents can result in injuries, lost productivity, and financial losses for both individuals and companies. Establishing a culture of safety awareness and prevention is crucial.
- Common causes of accidents include overconfidence, carelessness, negligence, fatigue, non-compliance with safety rules,
Visitors SHE Induction Presentation 2016
The document provides an induction for a construction site. It summarizes the following key points in 3 sentences:
The document outlines the legal health and safety requirements for the construction site, including providing training and ensuring workers use proper protective equipment. It also details various hazards on site like working at heights, electricity, and chemicals. The induction covers emergency procedures, incident reporting, and use of personal protective equipment like hard hats and safety shoes.
Hot Works Safety Training
CONTENTS:
I. What is a Hot Work ?
II. Training
III. PPE`s
IV. Hot Work Permit
V. Electric Welding
VI. Fire Prevention
VII. Fire Watch
VIII. Generator Sets
IX. Welding Equipment Checks
X. Oxy Cutting Equipment
XI. Fire Safety Precautions
XII. Compressed Gas Cylinders
XIII. Safe Practices
XIV. Heat Stress
New Employee Orientation 05
The document provides an overview of safety policies and procedures for new hires at Control Flow Inc. It outlines proper procedures and personal protective equipment requirements for various machinery, chemical handling, injury reporting, and other potential hazards. Non-compliance with safety rules could result in disciplinary action up to and including termination.
RAIN SAFETY by HSE INTEGRO
The document provides safety tips for staying safe during the rainy season. It recommends going indoors when thunder is heard to avoid lightning strikes, which can occur up to 10 miles from storms. Indoors, it advises unplugging electronics and avoiding plumbing until 30 minutes after the last lightning or thunder. When outside, it says to seek shelter in a large, substantial building or fully enclosed metal vehicle and never touch wiring or use corded phones. It also provides driving safety tips like slowing down on wet roads and not driving into flooded areas.
Recommended
Work at height safety
Fall hazard means a circumstance that exposes a worker in a workplace to a risk of a fall that is reasonably likely to cause injury to the worker or other person.
Assessing risks from working at height.
Common Fall Hazards at construction site.
Common Scaffold Hazards.
PERSONAL FALL PROTECTION.
Travel-Restraint Systems.
Fall-Arrest Systems.
Lifelines.
Scaffolding, also called scaffold or staging, is a temporary structure used to support a work crew and materials to aid in the construction, maintenance and repair of buildings, bridges and all other man made structures.
Working at height slides
The document provides information about working at heights training, including:
- The aims are to provide personnel working at heights with practical knowledge and application of safe practices to prevent injury.
- The objectives include identifying fall regulations and risks, demonstrating safety equipment use, and emergency response procedures.
- It discusses examples of working at heights, regulations and responsibilities to control fall risks, and the goals of reducing falls injuries.
Fire fighting presentation
The presentation discusses fire fighting and prevention. It covers the importance of fire training and history, causes of fire, the fire triangle and methods of extinguishing fires. It also discusses the classification of fires, types of fire extinguishers such as CO2 and AFFF extinguishers, and how to properly use them. The success of firefighting depends on well maintained equipment, training, and knowing which type of extinguisher to use for different fire classifications.
safety training
This document provides information about safety training. It discusses the importance of safety, causes of accidents, and how to prevent them. Some key points covered include:
- Safety is important to protect one's health and life. If body parts are lost, they cannot be replaced.
- Unsafe actions by workers account for 80% of accidents, while unsafe workplace conditions account for 18%. Natural disasters make up the remaining 2%.
- Accidents can result in injuries, lost productivity, and financial losses for both individuals and companies. Establishing a culture of safety awareness and prevention is crucial.
- Common causes of accidents include overconfidence, carelessness, negligence, fatigue, non-compliance with safety rules,
Visitors SHE Induction Presentation 2016
The document provides an induction for a construction site. It summarizes the following key points in 3 sentences:
The document outlines the legal health and safety requirements for the construction site, including providing training and ensuring workers use proper protective equipment. It also details various hazards on site like working at heights, electricity, and chemicals. The induction covers emergency procedures, incident reporting, and use of personal protective equipment like hard hats and safety shoes.
Hot Works Safety Training
CONTENTS:
I. What is a Hot Work ?
II. Training
III. PPE`s
IV. Hot Work Permit
V. Electric Welding
VI. Fire Prevention
VII. Fire Watch
VIII. Generator Sets
IX. Welding Equipment Checks
X. Oxy Cutting Equipment
XI. Fire Safety Precautions
XII. Compressed Gas Cylinders
XIII. Safe Practices
XIV. Heat Stress
New Employee Orientation 05
The document provides an overview of safety policies and procedures for new hires at Control Flow Inc. It outlines proper procedures and personal protective equipment requirements for various machinery, chemical handling, injury reporting, and other potential hazards. Non-compliance with safety rules could result in disciplinary action up to and including termination.
RAIN SAFETY by HSE INTEGRO
The document provides safety tips for staying safe during the rainy season. It recommends going indoors when thunder is heard to avoid lightning strikes, which can occur up to 10 miles from storms. Indoors, it advises unplugging electronics and avoiding plumbing until 30 minutes after the last lightning or thunder. When outside, it says to seek shelter in a large, substantial building or fully enclosed metal vehicle and never touch wiring or use corded phones. It also provides driving safety tips like slowing down on wet roads and not driving into flooded areas.
Safety induction presentation
This document provides an induction for new employees on occupational health and safety practices. It outlines current safety procedures, equipment safety checks, existing and potential workplace hazards, controlling risks, procedures for reporting incidents, emergency procedures, and employer and worker responsibilities. The induction aims to ensure the workplace remains safe for employees and visitors.
Presentation working at height
Working at height remains a major cause of injuries and fatalities. Employers must properly plan work at height, use the right equipment, and provide fall protection training to competent workers. Simple precautions like performing work from ladders safely and avoiding fragile surfaces can reduce risks. Workers should avoid working at unprotected heights whenever possible.
Working at-height
The document defines work at height as any work performed 1.8 meters or more above ground level, including below ground. Work above 1.8 meters requires a permit and safety checklist. Fall distances increase rapidly with time, emphasizing the need for fall protection like railings, safety harnesses attached to lifelines, and safety nets. Proper planning, equipment, and rescue procedures are required for working at heights.
Hira
This document provides information on Hazard Identification, Risk Assessment and Control (HIRAC). It defines risk, hazard, and ill health. It explains why HIRAC is important from both legal and financial perspectives. Key aspects of risk assessment are discussed, including factors to consider, evaluating likelihood and severity, and developing a risk matrix. The hierarchy of controls for reducing risk is outlined. Examples of potential hazards, consequences, and control measures are given. Guidance is provided on reviewing risk assessments, including triggers for when a review is needed. Related HIRAC procedures and documentation are listed.
Work at height. The basic needs.
Falls are the number one cause of fatalities in the construction industry, accounting for 33% of fall fatalities. A full body harness must be used for fall arrest, not a safety belt. Incidents often occur when workers are relaxed, moving between tasks, feel work is routine, take risks to finish work, or are rushing while working at heights. Fall protection systems like harnesses and lanyards can prevent injury if properly attached to anchor points and keep any fall under 2 meters. Planning, permits, and PPE are required for any work done more than 2 meters above the ground to prevent falls.
Safety in mechanical maintenance
Safety is the highest priority when entering confined spaces due to hazards like oxygen deficiency caused by consumption, displacement, or reaction which can occur in concentrations below 19.5% or above 23%. Proper equipment, training, and permitting procedures must be followed that designate roles for the entrant, attendant, and safety representative to prevent injury when working in confined spaces.
A fire training hindi
This document provides information on fire safety training and awareness. It discusses the importance of fire safety training in industries so employees understand combustion, hazards, and how to prevent and extinguish fires. The purpose of fire training is to build the right attitudes, provide information on fire risks, fighting techniques, first aid, emergency plans, and case histories. It details the roles of individuals during a fire, including not panicking, notifying others, raising alarms, fighting small fires if safe, and evacuating. The document also covers fire detection stages, elements for controlling fires, and sample fire safety questions and answers.
A Part 1 Safety Induction
Three key points from the document:
1. Safety is important to prevent accidents in the workplace caused by negligence, poor training, unsafe equipment or behaviors. Most accidents follow a pattern of lack of management controls, unsafe acts or conditions, and result in losses.
2. Employers and employees have legal duties under health and safety laws to protect workers and others from risks. This includes conducting risk assessments, implementing controls, providing training, and following safe systems of work.
3. Ignoring safety risks and procedures is against the law and can lead to prosecution, fines, injuries or even death for those involved and affected. All workers are responsible for keeping themselves and others safe by raising concerns and following safety rules.
Spill Prevention and Response Training by IMCOM
The document outlines spill prevention and response procedures for Fort Wainwright in Alaska. It discusses developing an installation-specific Spill Prevention, Control, and Countermeasure (SPCC) Plan, spill classifications as minor, intermediate or major, and spill response actions for each type of spill. For any spill, personnel should call emergency services, secure the site, stop and contain the spill if possible, and report the spill according to the requirements.
Line of fire safety
A short safety awareness session focussing on how to identify and prevent line of fire hazards and risks.
Basic safety
This document provides an overview of a basic safety training program. It covers the following key points in 3 sentences or less:
The objectives of the training are to start and complete work safely by developing safe habits and minimizing damage while maximizing safety. It discusses hazards, near misses, accidents, personal protective equipment, causes of accidents including unsafe acts and conditions, and prevention through hazard reporting, risk assessments, and following safety rules. The document provides exercises and content to educate workers on safety concepts, requirements, and best practices to promote a safe work environment.
Hazards in steel plant and their control, By B C das
Hazards and Accidents In the iron and Integrated steel industry- Recommendations to prevent and control exposure to ….. Safety Awareness, It is sharing of knowledge. By Bimal Chandra Das, Rtd. AGM (Safety), Bokaro Steel Plant,/ Bokaro. Kolkata
Fire watch man training
The document provides training on fire watch duties and fire prevention. It discusses that a fire watchman is required when hot work is conducted near flammable materials. The primary role of a fire watchman is to prevent and control fires. Their responsibilities include inspecting the area, ensuring flammable materials are covered, watching for fires, knowing emergency procedures, and sounding alarms if needed. The document also discusses common fire hazards, the elements needed for a fire, fire classes, how to select the proper extinguisher, and PASS method for using an extinguisher safely.
Amn safety induction j 175 - staff rev 4 - s 14
This document provides an induction training summary for a construction project at the Dubai Design District Office Building. It includes:
1. Key personnel overseeing the project including the Project Manager, Technical Manager, and HSE Manager.
2. Health and safety policies and objectives to provide a safe working environment and achieve zero injuries or fatalities through compliance with regulations and building a strong safety culture.
3. Safety requirements and prohibited behaviors covering smoking, alcohol and drugs, horseplay, proper PPE use, traffic and pedestrian rules, and more. Failure to comply can result in removal from the site or legal penalties.
RedPixel OHS Presentation
This document outlines the occupational health and safety induction and procedures for RedPixel Studios. It includes sections on the induction process, current safety procedures, equipment safety checks, safety representatives, existing and potential hazards, controlling risks, hazard reporting, meetings and inspections, emergency procedures, responsibilities, and resources for additional information. The goal is to introduce new employees to workplace safety policies and ensure all staff are aware of hazards and follow proper procedures to minimize risks.
Happy National Safety Day
National Safety Day/Week is celebrated annually in India from March 4-11 to raise awareness about safety in workplaces and reduce industrial accidents. The campaign has been spearheaded for nearly three decades by the National Safety Council to mark its foundation day on March 4. The objectives of the campaign are to promote safety, health, and environment movements across different industrial sectors and involve employees in safety activities through a participatory approach. The 2016 theme is "Strengthen Safety Movement To Achieve Zero Harm." Previous themes focused on building a safety culture, managing workplace stress, ensuring safe workplaces, and establishing a preventative safety culture.
Horrible Crane accident , 2 people died include one safety officer in RIL Jam...
A crane accident at a Reliance Industries site in Jamnagar, Gujarat, India on June 29, 2015 resulted in two deaths, including a safety officer. The crane operator failed to fully extend the outriggers of the 70-ton crane and did not account for uneven ground conditions, causing the crane to tip over during lifting operations and crush a nearby container with people inside. The accident took the lives of the crane operator helper and two other individuals, demonstrating the risks of operating heavy machinery without proper safety precautions.
Safety harness - fall protection - Wessam Atif
A brief presentation on how and when to use fall arrest system, how to don full body harness, when to use shock absorber and what to do if someone falls while wearing harness and lanyard to rescue them. Dr. Wessam Atif.
Power tools safety
Power tools can cause serious injuries if not properly maintained and safely operated. Workers should inspect tools for defects before each use, only use tools for their intended purposes, and wear appropriate personal protective equipment. Following manufacturers' instructions and maintaining good footing can help prevent accidents and injuries when operating power tools. Defective tools should be immediately taken out of service and reported to supervisors.
Near miss
Near Miss are warning that some one is not doing his job properly, the only difference between an accident and near miss is LUCK
Safety is one of the most important topic in the all industry .pptx
The document discusses the importance of safety in the workplace and provides several safety slogans to help promote safety. It notes that maintaining safety can be challenging but posting safety slogans can help protect workers from risks and prevent accidents. It then shares over 30 catchy safety slogans focused on topics like using proper tools, accident prevention, being aware and careful, the importance of protective equipment, addressing unsafe conditions, and prioritizing safety.
Safety Thoughts
The document provides simple messages to instill the value of safety. It emphasizes that safety should always come first and is never worth risking for a reward. Safety is important for a happy and healthy future and should be practiced at all times, not just on the job but as a lifestyle and personal responsibility. Practicing safety pays off with avoiding pain and injuries and ensures well-being for the future.
More Related Content
What's hot
Safety induction presentation
This document provides an induction for new employees on occupational health and safety practices. It outlines current safety procedures, equipment safety checks, existing and potential workplace hazards, controlling risks, procedures for reporting incidents, emergency procedures, and employer and worker responsibilities. The induction aims to ensure the workplace remains safe for employees and visitors.
Presentation working at height
Working at height remains a major cause of injuries and fatalities. Employers must properly plan work at height, use the right equipment, and provide fall protection training to competent workers. Simple precautions like performing work from ladders safely and avoiding fragile surfaces can reduce risks. Workers should avoid working at unprotected heights whenever possible.
Working at-height
The document defines work at height as any work performed 1.8 meters or more above ground level, including below ground. Work above 1.8 meters requires a permit and safety checklist. Fall distances increase rapidly with time, emphasizing the need for fall protection like railings, safety harnesses attached to lifelines, and safety nets. Proper planning, equipment, and rescue procedures are required for working at heights.
Hira
This document provides information on Hazard Identification, Risk Assessment and Control (HIRAC). It defines risk, hazard, and ill health. It explains why HIRAC is important from both legal and financial perspectives. Key aspects of risk assessment are discussed, including factors to consider, evaluating likelihood and severity, and developing a risk matrix. The hierarchy of controls for reducing risk is outlined. Examples of potential hazards, consequences, and control measures are given. Guidance is provided on reviewing risk assessments, including triggers for when a review is needed. Related HIRAC procedures and documentation are listed.
Work at height. The basic needs.
Falls are the number one cause of fatalities in the construction industry, accounting for 33% of fall fatalities. A full body harness must be used for fall arrest, not a safety belt. Incidents often occur when workers are relaxed, moving between tasks, feel work is routine, take risks to finish work, or are rushing while working at heights. Fall protection systems like harnesses and lanyards can prevent injury if properly attached to anchor points and keep any fall under 2 meters. Planning, permits, and PPE are required for any work done more than 2 meters above the ground to prevent falls.
Safety in mechanical maintenance
Safety is the highest priority when entering confined spaces due to hazards like oxygen deficiency caused by consumption, displacement, or reaction which can occur in concentrations below 19.5% or above 23%. Proper equipment, training, and permitting procedures must be followed that designate roles for the entrant, attendant, and safety representative to prevent injury when working in confined spaces.
A fire training hindi
This document provides information on fire safety training and awareness. It discusses the importance of fire safety training in industries so employees understand combustion, hazards, and how to prevent and extinguish fires. The purpose of fire training is to build the right attitudes, provide information on fire risks, fighting techniques, first aid, emergency plans, and case histories. It details the roles of individuals during a fire, including not panicking, notifying others, raising alarms, fighting small fires if safe, and evacuating. The document also covers fire detection stages, elements for controlling fires, and sample fire safety questions and answers.
A Part 1 Safety Induction
Three key points from the document:
1. Safety is important to prevent accidents in the workplace caused by negligence, poor training, unsafe equipment or behaviors. Most accidents follow a pattern of lack of management controls, unsafe acts or conditions, and result in losses.
2. Employers and employees have legal duties under health and safety laws to protect workers and others from risks. This includes conducting risk assessments, implementing controls, providing training, and following safe systems of work.
3. Ignoring safety risks and procedures is against the law and can lead to prosecution, fines, injuries or even death for those involved and affected. All workers are responsible for keeping themselves and others safe by raising concerns and following safety rules.
Spill Prevention and Response Training by IMCOM
The document outlines spill prevention and response procedures for Fort Wainwright in Alaska. It discusses developing an installation-specific Spill Prevention, Control, and Countermeasure (SPCC) Plan, spill classifications as minor, intermediate or major, and spill response actions for each type of spill. For any spill, personnel should call emergency services, secure the site, stop and contain the spill if possible, and report the spill according to the requirements.
Line of fire safety
A short safety awareness session focussing on how to identify and prevent line of fire hazards and risks.
Basic safety
This document provides an overview of a basic safety training program. It covers the following key points in 3 sentences or less:
The objectives of the training are to start and complete work safely by developing safe habits and minimizing damage while maximizing safety. It discusses hazards, near misses, accidents, personal protective equipment, causes of accidents including unsafe acts and conditions, and prevention through hazard reporting, risk assessments, and following safety rules. The document provides exercises and content to educate workers on safety concepts, requirements, and best practices to promote a safe work environment.
Hazards in steel plant and their control, By B C das
Hazards and Accidents In the iron and Integrated steel industry- Recommendations to prevent and control exposure to ….. Safety Awareness, It is sharing of knowledge. By Bimal Chandra Das, Rtd. AGM (Safety), Bokaro Steel Plant,/ Bokaro. Kolkata
Fire watch man training
The document provides training on fire watch duties and fire prevention. It discusses that a fire watchman is required when hot work is conducted near flammable materials. The primary role of a fire watchman is to prevent and control fires. Their responsibilities include inspecting the area, ensuring flammable materials are covered, watching for fires, knowing emergency procedures, and sounding alarms if needed. The document also discusses common fire hazards, the elements needed for a fire, fire classes, how to select the proper extinguisher, and PASS method for using an extinguisher safely.
Amn safety induction j 175 - staff rev 4 - s 14
This document provides an induction training summary for a construction project at the Dubai Design District Office Building. It includes:
1. Key personnel overseeing the project including the Project Manager, Technical Manager, and HSE Manager.
2. Health and safety policies and objectives to provide a safe working environment and achieve zero injuries or fatalities through compliance with regulations and building a strong safety culture.
3. Safety requirements and prohibited behaviors covering smoking, alcohol and drugs, horseplay, proper PPE use, traffic and pedestrian rules, and more. Failure to comply can result in removal from the site or legal penalties.
RedPixel OHS Presentation
This document outlines the occupational health and safety induction and procedures for RedPixel Studios. It includes sections on the induction process, current safety procedures, equipment safety checks, safety representatives, existing and potential hazards, controlling risks, hazard reporting, meetings and inspections, emergency procedures, responsibilities, and resources for additional information. The goal is to introduce new employees to workplace safety policies and ensure all staff are aware of hazards and follow proper procedures to minimize risks.
Happy National Safety Day
National Safety Day/Week is celebrated annually in India from March 4-11 to raise awareness about safety in workplaces and reduce industrial accidents. The campaign has been spearheaded for nearly three decades by the National Safety Council to mark its foundation day on March 4. The objectives of the campaign are to promote safety, health, and environment movements across different industrial sectors and involve employees in safety activities through a participatory approach. The 2016 theme is "Strengthen Safety Movement To Achieve Zero Harm." Previous themes focused on building a safety culture, managing workplace stress, ensuring safe workplaces, and establishing a preventative safety culture.
Horrible Crane accident , 2 people died include one safety officer in RIL Jam...
A crane accident at a Reliance Industries site in Jamnagar, Gujarat, India on June 29, 2015 resulted in two deaths, including a safety officer. The crane operator failed to fully extend the outriggers of the 70-ton crane and did not account for uneven ground conditions, causing the crane to tip over during lifting operations and crush a nearby container with people inside. The accident took the lives of the crane operator helper and two other individuals, demonstrating the risks of operating heavy machinery without proper safety precautions.
Safety harness - fall protection - Wessam Atif
A brief presentation on how and when to use fall arrest system, how to don full body harness, when to use shock absorber and what to do if someone falls while wearing harness and lanyard to rescue them. Dr. Wessam Atif.
Power tools safety
Power tools can cause serious injuries if not properly maintained and safely operated. Workers should inspect tools for defects before each use, only use tools for their intended purposes, and wear appropriate personal protective equipment. Following manufacturers' instructions and maintaining good footing can help prevent accidents and injuries when operating power tools. Defective tools should be immediately taken out of service and reported to supervisors.
Near miss
Near Miss are warning that some one is not doing his job properly, the only difference between an accident and near miss is LUCK
What's hot (20)
Hazards in steel plant and their control, By B C das
Hazards in steel plant and their control, By B C das
Horrible Crane accident , 2 people died include one safety officer in RIL Jam...
Horrible Crane accident , 2 people died include one safety officer in RIL Jam...
Similar to 100 Amazing safety slogans
Safety is one of the most important topic in the all industry .pptx
The document discusses the importance of safety in the workplace and provides several safety slogans to help promote safety. It notes that maintaining safety can be challenging but posting safety slogans can help protect workers from risks and prevent accidents. It then shares over 30 catchy safety slogans focused on topics like using proper tools, accident prevention, being aware and careful, the importance of protective equipment, addressing unsafe conditions, and prioritizing safety.
Safety Thoughts
The document provides simple messages to instill the value of safety. It emphasizes that safety should always come first and is never worth risking for a reward. Safety is important for a happy and healthy future and should be practiced at all times, not just on the job but as a lifestyle and personal responsibility. Practicing safety pays off with avoiding pain and injuries and ensures well-being for the future.
8 tips for women safety
Personal safety is an important issue for everyone, but especially for women. Here are 8 things you need to know about personal safety.
HSE Presentation
This document from SCOMI OILTOOLS provides information about workplace safety. It discusses the importance of following safety rules, wearing protective equipment, and keeping work areas safe to avoid injuries. Various hazards are defined such as things that can cut, burn, or crush workers. It also covers safety signs and their meanings, proper protective gear for different tasks, manual handling techniques like proper lifting, and evacuation procedures during drills. The overall message is that taking safety seriously helps ensure no one gets hurt on the job.
Working safely powerpoint_presentation
This document provides information and instructions about workplace safety. It discusses why safety is important, common hazards, required personal protective equipment, safety signs, manual handling, machine safety, waste disposal, and evacuation procedures. The goal is to educate workers about hazards and safety rules so they can work safely and prevent injuries.
working_safely_powerpoint_presentation.ppt
The "Working Safely Handbook" is a comprehensive document designed to provide employees with essential guidelines and protocols to ensure their safety in the workplace. This handbook covers a wide range of topics related to workplace safety.The "Working Safely Handbook" serves as a vital resource for both new hires and existing employees, fostering a culture of safety and accountability throughout the organization. By following the guidelines outlined in this document, employees can contribute to a safer and healthier work environment for themselves and their colleagues.
Working safely powerpoint_presentation
This document provides information and instructions about workplace safety. It discusses why safety is important, common hazards, required personal protective equipment, safety signs, manual handling, machine safety, waste disposal, and evacuation procedures. The goal is to educate workers about hazards and safety rules so they can work safely and prevent injuries.
Working safely presentation
This document provides information and instructions about workplace safety. It discusses why safety is important, common hazards, required personal protective equipment, safety signs, manual handling, machine safety, waste disposal, and evacuation procedures. The goal is to educate workers about hazards and safety rules so they can work safely and prevent injuries.
Similar to 100 Amazing safety slogans (8)
Safety is one of the most important topic in the all industry .pptx
Safety is one of the most important topic in the all industry .pptx
More from UBONG EDET
How Often Should Health And Safety Policy Be Reviewed.pdf
Health and safety policy should be reviewed on a regular basis in order to ensure that the workplace is as safe as possible for everyone who works there, and this includes contractors, visitors and any other people who might find themselves there during their working day. The exact schedule will vary depending on the nature of the workplace, with construction sites requiring more frequent reviews than offices, but once or twice per year will usually be sufficient in most situations.
How often should health and safety policy be reviewed?
The answer to this question depends on many different factors, including the industry you are in, the size of your company, and how you are managing your health and safety compliance program.
This article will discuss the factors that can determine when you should do your health and safety policy review, as well as some useful tips that you can use to make the process easier and more effective.
Confined Space Entry Permit Requirements.pdf
Confined Space Entry Permit Requirements -Entry into confined spaces can be a dangerous and potentially fatal process if done incorrectly. As such, the Occupational Safety and Health Administration (OSHA) has strict regulations in place regarding confined space entry, requiring all employers to inform workers of the risks of entering these areas and to obtain entry permits prior to entering them. If you want to learn more about confined space entry permit requirements, including who must obtain one and what must be included in your permit application, keep reading!
Why Are Confined Space Entry Permit Required?
There are many situations where a confined space entry permit may be required. First and foremost, there are several common hazards that make confined spaces potentially dangerous places for workers. Confined spaces often contain airborne particles, noxious fumes, or other harmful chemicals or gases. There is also a risk of electrical shock when working in a confined space due to exposed wiring and equipment that poses an electrocution hazard.
When workers must enter a confined space, there are certain procedures that must be followed. These procedures include how to prepare for entering and exiting a confined space as well as how workers should enter and exit. In addition, many confined spaces require specialized equipment in order for entry or exit to occur safely. Finally, a permit is required because all workers involved with an entry or exit procedure must be trained on it and receive instruction on what to do if anything goes wrong during the procedure.
A confined space entry permit is a document that contains essential information on how entry and exit should occur as well as any specific requirements that may apply. It will also include where a copy of the confined space entry procedure is located so that workers can review it before entering or exiting.
Obtaining a confined space entry permit is a two-step process. The first step involves determining whether or not entry is required. In order for an entry permit to be required, certain conditions must be met including that there is no other means of entering or exiting and only trained workers may enter.
What Is Required On A Confined Space Entry Permit: A confined space entry permit will include essential information about how workers should proceed when entering or exiting a confined space. These procedures typically include special safety precautions such as wearing personal protective equipment like hard hats, goggles, and gloves. There may also be instructions about how to maintain proper ventilation inside the confined space. Other instructions might include how workers should dress for the job (safety vests or reflective clothing) and where they can find additional resources such as copies of confined space entry permits or confined space evacuation plans.
OSHA Confined Space Air Monitoring Requirements.pdf
How much air do you need in your confined space? The answer to this question depends on a variety of factors, but OSHA has some requirements about how you monitor the air quality in your confined spaces, and that process starts with knowing what your acceptable levels are and what action to take when they’re not met. Here’s what you need to know about the Osha Confined Space Air Monitoring Requirements, including how it affects workers in non-permit required spaces.
How To Report Accident At Work Properly.pdf
How To Report Accident At Work – There are many accidents that happen in the workplace, and they can range from minor incidents to fatal disasters. No matter what kind of accident occurs, however, it is important to report it if you want your company to avoid future liability issues or be protected by workers’ compensation laws.
It is essential that you know how to report it properly in order to receive the benefits that come with being covered under workers compensation laws. If you do not report your accident correctly, you could end up paying far more out of pocket than what you would have had to pay otherwise if you properly reported your accident from the beginning. Make sure to follow these instructions if you ever find yourself in this situation.
Mechanical Hazards And Common Mechanical Injuries.pdf
Mechanical hazards are hazards created by the use of or exposure to either powered or manually operated equipment, machinery and plant. Mechanical injuries are mostly caused either by contact or entanglement with machinery. Part of the machinery that could be hazardous to workers include sharp edges, hot surfaces, moving parts, flywheel, pulley, belt, etc.
Where Mechanical Hazards Occur
It occurs majorly in three (3) area:
The point of operation: Point where work is performed on the material, such as cutting, shaping, boring, etc.
Power transmission apparatus: Components of the mechanical system that transmit energy to the part of the machine performing the work. Example, flywheels, pulleys, belts, connecting rods, couplings, cams, spindles, chains, cranks, gears, etc.
Machine moving parts: Parts of the machine that move while the machine is working. These may include reciprocating, rotating, and transverse moving parts, as well as feed mechanisms and auxiliary parts of the machine.
8 Types of Permit To Work (PTW.pdf
In this article, we will be discussing on the “Types of Permit to Work“. There are several types of permit to work, but within the scope of this article, we will talk about eight (8) types.
Before we get into the types of work permit let us remind ourselves of what a Work Permit is.
What is a Work Permit
Work Permit or Permit To Work (PTW) is a safety program initiated for high risk activities. It is a core element of integrated safe system of work (ISSOW) systems, along with risk assessment and isolation planning. It enables as low as reasonably practicable (ALARP) reduction of unsafe activities in non-trivial work environments. Permit to work adherence is essential in process safety management.
Occupational Hazard.pdf
Occupational hazard is a hazard experienced in the workplace, it can encompass many types of hazards, including chemical hazards, biological hazards (biohazards), psychosocial hazards, and physical hazards.
In other words, occupational hazard explains the risks of illnesses or accidents in the workplace. An occupational hazard is something unpleasant that a person experiences or suffers as a result of doing their job. Some dictionaries say that the term also includes hazards that people experience as a result of working on their hobbies.
Occupational hazard as a term signifies both long-term and short-term risks associated with the workplace environment and is a field of study within occupational safety and health and public health. Short term risks may include physical injury, while long-term risks may be increased risk of developing cancer or heart disease.
6 Methods Of Risk Assessment You Should Know.pdf
Methods of risk assessment differs in different sectors and organisations, but a method adopted should best suit the organization process.
Before we get into the subject of the article, let use refresh our minds on what risk assessment entails.
Risk assessment is the determination of quantitative or qualitative estimate of risk related to a well-defined situation and a recognized threat (also called hazard).
Mathematically:
Quantitative risk assessment requires calculations of two components of risk (R)
The magnitude of the potential loss (L), and
The probability (p) that the loss will occur.
In summary, to conduct risk assessment, 5 main steps are always adopted.
Identify the hazard: Be it physical, mental, chemical or biological.
Decide who could be harm
Assess the risk
Make record of findings
21 Important Safety Signs & Symbols And Their Meanings.pdf
Safety Symbols are labels portraying graphics set forth by the International Standards Organization (ISO) which are recognized internationally. This helps ensure the dangers present are understood by an increasingly multi-lingual workforce. The shapes and colours of the safety symbols distinguish the hazard type or hazard instruction.
These Safety symbols are divides into four (4) categories:
1. Prohibition Sign
2. Warning Signs
3. Mandatory Sign
4. Emergency Sign
21 top health and safety twitter handles you should follow
In this article, I will mention top health and safety twitter handles you should follow as a health and safety professional.
The list will be made up of top players in the Health and safety profession. Following them will link you up with current trends and innovations in the Health and safety profession.
What is a near miss
A near miss is an incident which results to no injury, no damage to property/equipment/machinery, and no environmental effect but has the potential for all those. It is mostly overlooked on site because it presents no negative impact. Though it poses no immediate negative impact, it can present us with trend of events which may result to serious damage and losses if properly investigated.
Fire extinguisher service; how it is done
Fire extinguisher service is needful to ensure that fire extinguishers installed in our organization are in a workable state; however, the NFPA (National Fire Prevention Association) requires inspection of your extinguisher every month. Also as part of the annual maintenance, it is required by I.S. 291:2015 that at least one third of all water, foam, dry powder and carbon dioxide extinguishers will be test discharged and refilled annually.
Fire tetrahedron
A tetrahedron can be described as a pyramid which is a solid having four plane faces. When we talk about the fire tetrahedron, it is symbolically used to express all four essential elements that must be present for fire to occur – fuel, heat, oxygen, and a chemical chain reaction. Removal of any one of these essential elements will result in the fire being extinguished.
100 Amazing safety slogans
Here is a list of "100 Amazing safety slogans". Safety Slogan is a short, striking and memorable phrase use to convey important safety information. Safety slogan is used in our workplaces to pass important safety information to the workers. It helps keep the workers in-check, helping them avoid unsafe acts and condition thereby reducing accident onsite.
More from UBONG EDET (14)
How Often Should Health And Safety Policy Be Reviewed.pdf
How Often Should Health And Safety Policy Be Reviewed.pdf
OSHA Confined Space Air Monitoring Requirements.pdf
OSHA Confined Space Air Monitoring Requirements.pdf
Mechanical Hazards And Common Mechanical Injuries.pdf
Mechanical Hazards And Common Mechanical Injuries.pdf
21 Important Safety Signs & Symbols And Their Meanings.pdf
21 Important Safety Signs & Symbols And Their Meanings.pdf
21 top health and safety twitter handles you should follow
21 top health and safety twitter handles you should follow
Recently uploaded
Travis Hills' Endeavors in Minnesota: Fostering Environmental and Economic Pr...
Travis Hills of Minnesota developed a method to convert waste into high-value dry fertilizer, significantly enriching soil quality. By providing farmers with a valuable resource derived from waste, Travis Hills helps enhance farm profitability while promoting environmental stewardship. Travis Hills' sustainable practices lead to cost savings and increased revenue for farmers by improving resource efficiency and reducing waste.
Randomised Optimisation Algorithms in DAPHNE
Slides from talk:
Aleš Zamuda: Randomised Optimisation Algorithms in DAPHNE .
Austrian-Slovenian HPC Meeting 2024 – ASHPC24, Seeblickhotel Grundlsee in Austria, 10–13 June 2024
https://ashpc.eu/
THEMATIC APPERCEPTION TEST(TAT) cognitive abilities, creativity, and critic...
THEMATIC APPERCEPTION TEST(TAT) cognitive abilities, creativity, and critic...Abdul Wali Khan University Mardan,kP,Pakistan
hematic appreciation test is a psychological assessment tool used to measure an individual's appreciation and understanding of specific themes or topics. This test helps to evaluate an individual's ability to connect different ideas and concepts within a given theme, as well as their overall comprehension and interpretation skills. The results of the test can provide valuable insights into an individual's cognitive abilities, creativity, and critical thinking skillsDeep Software Variability and Frictionless Reproducibility
Deep Software Variability and Frictionless ReproducibilityUniversity of Rennes, INSA Rennes, Inria/IRISA, CNRS
The ability to recreate computational results with minimal effort and actionable metrics provides a solid foundation for scientific research and software development. When people can replicate an analysis at the touch of a button using open-source software, open data, and methods to assess and compare proposals, it significantly eases verification of results, engagement with a diverse range of contributors, and progress. However, we have yet to fully achieve this; there are still many sociotechnical frictions.
Inspired by David Donoho's vision, this talk aims to revisit the three crucial pillars of frictionless reproducibility (data sharing, code sharing, and competitive challenges) with the perspective of deep software variability.
Our observation is that multiple layers — hardware, operating systems, third-party libraries, software versions, input data, compile-time options, and parameters — are subject to variability that exacerbates frictions but is also essential for achieving robust, generalizable results and fostering innovation. I will first review the literature, providing evidence of how the complex variability interactions across these layers affect qualitative and quantitative software properties, thereby complicating the reproduction and replication of scientific studies in various fields.
I will then present some software engineering and AI techniques that can support the strategic exploration of variability spaces. These include the use of abstractions and models (e.g., feature models), sampling strategies (e.g., uniform, random), cost-effective measurements (e.g., incremental build of software configurations), and dimensionality reduction methods (e.g., transfer learning, feature selection, software debloating).
I will finally argue that deep variability is both the problem and solution of frictionless reproducibility, calling the software science community to develop new methods and tools to manage variability and foster reproducibility in software systems.
Exposé invité Journées Nationales du GDR GPL 2024
Thornton ESPP slides UK WW Network 4_6_24.pdf
ESPP presentation to EU Waste Water Network, 4th June 2024 “EU policies driving nutrient removal and recycling
and the revised UWWTD (Urban Waste Water Treatment Directive)”
SAR of Medicinal Chemistry 1st by dk.pdf
In this presentation include the prototype drug SAR on thus or with their examples .
Syllabus of Second Year B. Pharmacy
2019 PATTERN.
Describing and Interpreting an Immersive Learning Case with the Immersion Cub...
Current descriptions of immersive learning cases are often difficult or impossible to compare. This is due to a myriad of different options on what details to include, which aspects are relevant, and on the descriptive approaches employed. Also, these aspects often combine very specific details with more general guidelines or indicate intents and rationales without clarifying their implementation. In this paper we provide a method to describe immersive learning cases that is structured to enable comparisons, yet flexible enough to allow researchers and practitioners to decide which aspects to include. This method leverages a taxonomy that classifies educational aspects at three levels (uses, practices, and strategies) and then utilizes two frameworks, the Immersive Learning Brain and the Immersion Cube, to enable a structured description and interpretation of immersive learning cases. The method is then demonstrated on a published immersive learning case on training for wind turbine maintenance using virtual reality. Applying the method results in a structured artifact, the Immersive Learning Case Sheet, that tags the case with its proximal uses, practices, and strategies, and refines the free text case description to ensure that matching details are included. This contribution is thus a case description method in support of future comparative research of immersive learning cases. We then discuss how the resulting description and interpretation can be leveraged to change immersion learning cases, by enriching them (considering low-effort changes or additions) or innovating (exploring more challenging avenues of transformation). The method holds significant promise to support better-grounded research in immersive learning.
Applied Science: Thermodynamics, Laws & Methodology.pdf
When I was asked to give a companion lecture in support of ‘The Philosophy of Science’ (https://shorturl.at/4pUXz) I decided not to walk through the detail of the many methodologies in order of use. Instead, I chose to employ a long standing, and ongoing, scientific development as an exemplar. And so, I chose the ever evolving story of Thermodynamics as a scientific investigation at its best.
Conducted over a period of >200 years, Thermodynamics R&D, and application, benefitted from the highest levels of professionalism, collaboration, and technical thoroughness. New layers of application, methodology, and practice were made possible by the progressive advance of technology. In turn, this has seen measurement and modelling accuracy continually improved at a micro and macro level.
Perhaps most importantly, Thermodynamics rapidly became a primary tool in the advance of applied science/engineering/technology, spanning micro-tech, to aerospace and cosmology. I can think of no better a story to illustrate the breadth of scientific methodologies and applications at their best.
Unlocking the mysteries of reproduction: Exploring fecundity and gonadosomati...
The pygmy halfbeak Dermogenys colletei, is known for its viviparous nature, this presents an intriguing case of relatively low fecundity, raising questions about potential compensatory reproductive strategies employed by this species. Our study delves into the examination of fecundity and the Gonadosomatic Index (GSI) in the Pygmy Halfbeak, D. colletei (Meisner, 2001), an intriguing viviparous fish indigenous to Sarawak, Borneo. We hypothesize that the Pygmy halfbeak, D. colletei, may exhibit unique reproductive adaptations to offset its low fecundity, thus enhancing its survival and fitness. To address this, we conducted a comprehensive study utilizing 28 mature female specimens of D. colletei, carefully measuring fecundity and GSI to shed light on the reproductive adaptations of this species. Our findings reveal that D. colletei indeed exhibits low fecundity, with a mean of 16.76 ± 2.01, and a mean GSI of 12.83 ± 1.27, providing crucial insights into the reproductive mechanisms at play in this species. These results underscore the existence of unique reproductive strategies in D. colletei, enabling its adaptation and persistence in Borneo's diverse aquatic ecosystems, and call for further ecological research to elucidate these mechanisms. This study lends to a better understanding of viviparous fish in Borneo and contributes to the broader field of aquatic ecology, enhancing our knowledge of species adaptations to unique ecological challenges.
Micronuclei test.M.sc.zoology.fisheries.
Current Ms word generated power point presentation covers major details about the micronuclei test. It's significance and assays to conduct it. It is used to detect the micronuclei formation inside the cells of nearly every multicellular organism. It's formation takes place during chromosomal sepration at metaphase.
Equivariant neural networks and representation theory
Or: Beyond linear.
Abstract: Equivariant neural networks are neural networks that incorporate symmetries. The nonlinear activation functions in these networks result in interesting nonlinear equivariant maps between simple representations, and motivate the key player of this talk: piecewise linear representation theory.
Disclaimer: No one is perfect, so please mind that there might be mistakes and typos.
dtubbenhauer@gmail.com
Corrected slides: dtubbenhauer.com/talks.html
Immersive Learning That Works: Research Grounding and Paths Forward
We will metaverse into the essence of immersive learning, into its three dimensions and conceptual models. This approach encompasses elements from teaching methodologies to social involvement, through organizational concerns and technologies. Challenging the perception of learning as knowledge transfer, we introduce a 'Uses, Practices & Strategies' model operationalized by the 'Immersive Learning Brain' and ‘Immersion Cube’ frameworks. This approach offers a comprehensive guide through the intricacies of immersive educational experiences and spotlighting research frontiers, along the immersion dimensions of system, narrative, and agency. Our discourse extends to stakeholders beyond the academic sphere, addressing the interests of technologists, instructional designers, and policymakers. We span various contexts, from formal education to organizational transformation to the new horizon of an AI-pervasive society. This keynote aims to unite the iLRN community in a collaborative journey towards a future where immersive learning research and practice coalesce, paving the way for innovative educational research and practice landscapes.
The debris of the ‘last major merger’ is dynamically young
The Milky Way’s (MW) inner stellar halo contains an [Fe/H]-rich component with highly eccentric orbits, often referred to as the
‘last major merger.’ Hypotheses for the origin of this component include Gaia-Sausage/Enceladus (GSE), where the progenitor
collided with the MW proto-disc 8–11 Gyr ago, and the Virgo Radial Merger (VRM), where the progenitor collided with the
MW disc within the last 3 Gyr. These two scenarios make different predictions about observable structure in local phase space,
because the morphology of debris depends on how long it has had to phase mix. The recently identified phase-space folds in Gaia
DR3 have positive caustic velocities, making them fundamentally different than the phase-mixed chevrons found in simulations
at late times. Roughly 20 per cent of the stars in the prograde local stellar halo are associated with the observed caustics. Based
on a simple phase-mixing model, the observed number of caustics are consistent with a merger that occurred 1–2 Gyr ago.
We also compare the observed phase-space distribution to FIRE-2 Latte simulations of GSE-like mergers, using a quantitative
measurement of phase mixing (2D causticality). The observed local phase-space distribution best matches the simulated data
1–2 Gyr after collision, and certainly not later than 3 Gyr. This is further evidence that the progenitor of the ‘last major merger’
did not collide with the MW proto-disc at early times, as is thought for the GSE, but instead collided with the MW disc within
the last few Gyr, consistent with the body of work surrounding the VRM.
bordetella pertussis.................................ppt
Bordettela is a gram negative cocobacilli spread by air born drop let
Phenomics assisted breeding in crop improvement
As the population is increasing and will reach about 9 billion upto 2050. Also due to climate change, it is difficult to meet the food requirement of such a large population. Facing the challenges presented by resource shortages, climate
change, and increasing global population, crop yield and quality need to be improved in a sustainable way over the coming decades. Genetic improvement by breeding is the best way to increase crop productivity. With the rapid progression of functional
genomics, an increasing number of crop genomes have been sequenced and dozens of genes influencing key agronomic traits have been identified. However, current genome sequence information has not been adequately exploited for understanding
the complex characteristics of multiple gene, owing to a lack of crop phenotypic data. Efficient, automatic, and accurate technologies and platforms that can capture phenotypic data that can
be linked to genomics information for crop improvement at all growth stages have become as important as genotyping. Thus,
high-throughput phenotyping has become the major bottleneck restricting crop breeding. Plant phenomics has been defined as the high-throughput, accurate acquisition and analysis of multi-dimensional phenotypes
during crop growing stages at the organism level, including the cell, tissue, organ, individual plant, plot, and field levels. With the rapid development of novel sensors, imaging technology,
and analysis methods, numerous infrastructure platforms have been developed for phenotyping.
Recently uploaded (20)
Travis Hills' Endeavors in Minnesota: Fostering Environmental and Economic Pr...
Travis Hills' Endeavors in Minnesota: Fostering Environmental and Economic Pr...
THEMATIC APPERCEPTION TEST(TAT) cognitive abilities, creativity, and critic...
THEMATIC APPERCEPTION TEST(TAT) cognitive abilities, creativity, and critic...
Deep Software Variability and Frictionless Reproducibility
Deep Software Variability and Frictionless Reproducibility
Describing and Interpreting an Immersive Learning Case with the Immersion Cub...
Describing and Interpreting an Immersive Learning Case with the Immersion Cub...
Applied Science: Thermodynamics, Laws & Methodology.pdf
Applied Science: Thermodynamics, Laws & Methodology.pdf
Unlocking the mysteries of reproduction: Exploring fecundity and gonadosomati...
Unlocking the mysteries of reproduction: Exploring fecundity and gonadosomati...
Equivariant neural networks and representation theory
Equivariant neural networks and representation theory
mô tả các thí nghiệm về đánh giá tác động dòng khí hóa sau đốt
mô tả các thí nghiệm về đánh giá tác động dòng khí hóa sau đốt
Immersive Learning That Works: Research Grounding and Paths Forward
Immersive Learning That Works: Research Grounding and Paths Forward
aziz sancar nobel prize winner: from mardin to nobel
aziz sancar nobel prize winner: from mardin to nobel
The debris of the ‘last major merger’ is dynamically young
The debris of the ‘last major merger’ is dynamically young
bordetella pertussis.................................ppt
bordetella pertussis.................................ppt
100 Amazing safety slogans
- 1. Here are amazing SafetySlogans 1. Your SafetyYourresponsibility 2. Your safetyandmine…oursharedresponsibility 3. Safety doesnotdependonluck 4. Safetydependsonyou 5. Safetystartswithyou 6. Safetyisnot precious,itispriceless 7. Hard hats; theyare notjustfor decoration 8. Safety isno accident 9. Standup for safety 10. Safetyglasses:All infavoursay “Eye” 11. Protectyour hand……Use yourhead 12. Stop!Think! Thenact 13. Safetyfirst 14. Leave sooner,drive slower,livelonger 15. Safety…Doitfor life 16. Safetypays 17. Your health,yourwealth 18. You getwhat youinspect,notwhatyou expect 19. Alwayskeepyoureyesonthe ball 20. The safety riskis the one youdidn’ttake 21. Make yourplan the best– Saferthan all the rest 22. Get the safetyhabit 23. Don’tfix the blame,fix the problem 24. Hearingprotectionisa soundinvestment 25. One safe act can leadtoanother 26. Tell me – I forget;Showme – I remember;Involve me –Am committed 27. Short cuts,cut live short 28. No safety,knowpain;Knowsafety,nopain 29. It isbetterto correct an unsafe friendthantoburryone 30. Be a safety hero 31. Score an accidentzero 32. Safety – It’sa tool forLIFE 33. Safetycomesina can – I can, youcan, we can be safe. 34. Whenyougamble withsafety,youbetyourlife 35. Safety hasno time out 36. Safety – Live withit 37. Safety – Every ones full time job 38. Whenindoubt,get out 39. Your goodhealthisyour greatestwealth 40. Accidentprevention –Your No1 intention
- 2. 41. Work safely,somebodywantsyoubackhome 42. Don’tCrawfishonsafety 43. Safetyiseverybody’sresponsibility 44. Safetyisour investment 45. Safetyfirst,safetyalways 46. Tomorrow – Your rewardof workingsafelytoday 47. Safetyfirsteverywhere 48. A spill,A slipahospital trip 49. Is bettertolose a minute thanto lose a life 50. That call can wait 51. Safetyisan act 52. You live towork,you don’twork to live 53. Safetybeginswithteamwork 54. Safetyisgainful,accidentispainful 55. Think safety,actsafety 56. Stay alert, don’tgethurt 57. Neverforgetthe A,B, C of safety 58. Everydayisa safetyday. 59. Watch your steps 60. Safetyisn’tjusta slogan, it’saway of life 61. Accidentbringstears,safetybringcheers 62. Practice safetyaroundthe clock 63. Abide safety,avoidcasualty 64. Climbladdersslowly anduse bothhands 65. Safetyneverhurts 66. Betterto be safe than to be sorry 67. Safetyhasno quittingtime 68. Safe today= Safe tomorrow 69. Safetyrules,yourbesttools 70. Thinksafetybefore you start 71. Don’ttry to liftmore than youare able 72. Safetyever,accidentnever 73. Feel safety,free accident 74. Safetyshoes first,stepsnext 75. Safetypaysincountlessways 76. Impatientonroad,patientinhospital 77. Impatientonroad,patientinpolice cell 78. Eyesare priceless,eyeprotectionischeap 79. You can’t gethome safe,if youdon’tworksafely 80. Don’tput your life onthe line,thinksafety 81. Done be safetyblinded,be safetyminded 82. Alerttoday,alive tomorrow
- 3. 83. Betterlate thanbe late 84. You won’tfeel soincredible afterbeingexposedtohazardouschemical 85. Afterthe ball comesthe boy 86. Talk the talk – walk the walk 87. Shortcutis a killer 88. Hurry up can hurt 89. Safetyisa choice youmake 90. Do the do’s,not the don’ts 91. Nevergive safety adayoff 92. Neverallowlucktorun out – Choose safety 93. Had I knownisa cry of the losers 94. Think – Safety beginswithyou 95. You betterbeginthanbe gone 96. Neverassume,be sure 97. Short cutsleadsto deepcuts 98. Safetyisa priority,qualityisastandard 99. Safetyisa full time job, don’tmake ita part time practice 100. Ignore hazardtoday, invite accidenttomorrow