This document provides details of pressure vessels and heat exchangers designed and manufactured by the company. It lists 27 heat exchangers and 13 pressure vessels along with their key parameters such as size, design conditions, materials, and year of supply. It also lists 13 jobs executed in-house such as chimneys, tanks, and equipment assemblies.
Bobcat 325 excavator parts catalogue manual sn 514011001 514012999fjkskemdmkem
This document provides a parts list for various components of an excavator. It includes 3 pages listing over 100 individual part numbers, descriptions, quantities and other details for the upperstructure, engine covers, side covers, tanks, cab, canopy, and cab insulation. The parts cover the frame, covers, brackets, seals, fasteners, insulation and other miscellaneous components that make up these areas of the excavator.
The document appears to be engineering drawings and specifications for piping and instrumentation for a gas metering and safety controls system. It includes multiple pages with detailed drawings of pipe spools, lists of items and part numbers, general notes and requirements. Revisions are noted for changes to pipe routing and component locations.
1) The document provides technical specifications for a 35 MW turbo generator including details of the turbine, generator, auxiliaries and operating parameters.
2) It also includes specifications for a 6MW turbine, 6MW generator, and their operating parameters and components like the gearbox and couplings.
3) The specifications include make, model, power rating, operating parameters, dimensions, materials and other key details of the major equipment.
This document provides information on various types of flexible grid couplings produced by CMDCouplings, including:
- The Winflex coupling, which features a special hub tooth design that increases contact surface with the grid proportionally to torque to maintain constant contact pressure.
- A range of coupling types for different applications, such as single cover, spacer, and overrunning clutch types.
- Technical specifications and dimensions for different coupling sizes, including nominal torque ratings, keyway and bore dimensions, weights, and maximum speed ratings.
- Information on selecting the proper coupling size based on calculated torque requirements and compatibility with shaft speeds and bores.
This document describes various types of vacuum cups and their specifications. It includes traditional cup-shaped vacuum cups for gripping small flat or slightly curved objects. These cups range from 4-45mm in diameter and are made from standard compounds like natural rubber, oil-resistant rubber, and silicone. They can be attached to supports made of brass or aluminum. Specifications are provided for different cup sizes, materials, and attachment options. The document also contains diagrams of the cups and supports.
Bobcat 341 Excavator Parts Catalogue Manual S/N 230611001 and Abovekjse
This is the Highly Detailed factory Parts manual for theBOBCAT 341 EXCAVATOR, this Parts Manual has detailed illustrations as well as step by step instructions,It is 100 percents complete and intact. they are specifically written for the do-it-yourself-er as well as the experienced mechanic.BOBCAT 341 EXCAVATOR Parts Manual provides step-by-step instructions based on the complete dis-assembly of the machine. It is this level of detail, along with hundreds of photos and illustrations, that guide the reader through each service and repair procedure. Complete download comes in pdf format which can work under all PC based windows operating system and Mac also, All pages are printable. Using this Parts manual is an inexpensive way to keep your vehicle working properly.
Parts Manual Covers:
Information
Main Frame
Undercarriage
Work Equipment
Controls
Hydraulic Circuitry
Electrical Systems
Power Unit
Accessories and Options
File Format: PDF
Compatible: All Versions of Windows & Mac
Language: English
Requirements: Adobe PDF Reader
NO waiting, Buy from responsible seller and get INSTANT DOWNLOAD, Without wasting your hard-owned money on uncertainty or surprise! All pages are is great to haveBOBCAT 341 EXCAVATOR Parts Manual.
Looking for some other Parts Manual,please check:
https://www.aservicemanualpdf.com/
Thanks for visiting!
8
Komatsu pc180 lc 7k crawler excavator parts catalogue manual - sn k40001 and upudfjjjskekdme
This document provides part numbers and descriptions for components related to the cooling system of a Komatsu PC180LC-7K excavator with serial number K40001 and up. It includes 52 line items describing the radiator core assembly, radiator sheets, radiator piping, oil cooler, radiator mount frames, and associated bolts, washers, caps, plugs, hoses and o-rings.
Case 410 skid steer loader service repair manualhjsnmdmme
This document provides a parts catalogue for a 410 skid steer loader. It lists parts for the radiator and coolant recovery system, fan mounting, exhaust system, air cleaner, engine mounting, oil fill, cylinder block, and cylinder head. The parts are organized by system and include the part number, quantity, and description for each component.
Bobcat 325 excavator parts catalogue manual sn 514011001 514012999fjkskemdmkem
This document provides a parts list for various components of an excavator. It includes 3 pages listing over 100 individual part numbers, descriptions, quantities and other details for the upperstructure, engine covers, side covers, tanks, cab, canopy, and cab insulation. The parts cover the frame, covers, brackets, seals, fasteners, insulation and other miscellaneous components that make up these areas of the excavator.
The document appears to be engineering drawings and specifications for piping and instrumentation for a gas metering and safety controls system. It includes multiple pages with detailed drawings of pipe spools, lists of items and part numbers, general notes and requirements. Revisions are noted for changes to pipe routing and component locations.
1) The document provides technical specifications for a 35 MW turbo generator including details of the turbine, generator, auxiliaries and operating parameters.
2) It also includes specifications for a 6MW turbine, 6MW generator, and their operating parameters and components like the gearbox and couplings.
3) The specifications include make, model, power rating, operating parameters, dimensions, materials and other key details of the major equipment.
This document provides information on various types of flexible grid couplings produced by CMDCouplings, including:
- The Winflex coupling, which features a special hub tooth design that increases contact surface with the grid proportionally to torque to maintain constant contact pressure.
- A range of coupling types for different applications, such as single cover, spacer, and overrunning clutch types.
- Technical specifications and dimensions for different coupling sizes, including nominal torque ratings, keyway and bore dimensions, weights, and maximum speed ratings.
- Information on selecting the proper coupling size based on calculated torque requirements and compatibility with shaft speeds and bores.
This document describes various types of vacuum cups and their specifications. It includes traditional cup-shaped vacuum cups for gripping small flat or slightly curved objects. These cups range from 4-45mm in diameter and are made from standard compounds like natural rubber, oil-resistant rubber, and silicone. They can be attached to supports made of brass or aluminum. Specifications are provided for different cup sizes, materials, and attachment options. The document also contains diagrams of the cups and supports.
Bobcat 341 Excavator Parts Catalogue Manual S/N 230611001 and Abovekjse
This is the Highly Detailed factory Parts manual for theBOBCAT 341 EXCAVATOR, this Parts Manual has detailed illustrations as well as step by step instructions,It is 100 percents complete and intact. they are specifically written for the do-it-yourself-er as well as the experienced mechanic.BOBCAT 341 EXCAVATOR Parts Manual provides step-by-step instructions based on the complete dis-assembly of the machine. It is this level of detail, along with hundreds of photos and illustrations, that guide the reader through each service and repair procedure. Complete download comes in pdf format which can work under all PC based windows operating system and Mac also, All pages are printable. Using this Parts manual is an inexpensive way to keep your vehicle working properly.
Parts Manual Covers:
Information
Main Frame
Undercarriage
Work Equipment
Controls
Hydraulic Circuitry
Electrical Systems
Power Unit
Accessories and Options
File Format: PDF
Compatible: All Versions of Windows & Mac
Language: English
Requirements: Adobe PDF Reader
NO waiting, Buy from responsible seller and get INSTANT DOWNLOAD, Without wasting your hard-owned money on uncertainty or surprise! All pages are is great to haveBOBCAT 341 EXCAVATOR Parts Manual.
Looking for some other Parts Manual,please check:
https://www.aservicemanualpdf.com/
Thanks for visiting!
8
Komatsu pc180 lc 7k crawler excavator parts catalogue manual - sn k40001 and upudfjjjskekdme
This document provides part numbers and descriptions for components related to the cooling system of a Komatsu PC180LC-7K excavator with serial number K40001 and up. It includes 52 line items describing the radiator core assembly, radiator sheets, radiator piping, oil cooler, radiator mount frames, and associated bolts, washers, caps, plugs, hoses and o-rings.
Case 410 skid steer loader service repair manualhjsnmdmme
This document provides a parts catalogue for a 410 skid steer loader. It lists parts for the radiator and coolant recovery system, fan mounting, exhaust system, air cleaner, engine mounting, oil fill, cylinder block, and cylinder head. The parts are organized by system and include the part number, quantity, and description for each component.
Claas xerion 5000 4000 tractor parts catalogue manual (sn 78200011-78299999)dujfjjksekmmd
The document provides parts information for engine crankcases and suspensions for various Perkins and CAT engine models. It includes the part numbers, descriptions, dimensions and quantities of individual parts as well as the equipment and machine numbers they correspond to. The parts are listed in tables organized by part number, description, and other identifying information. Notes provide additional details on the applicable equipment and conditions.
Mc cormick fxl techno tier 2 (2003 2008) - rp52 - f95 fgexl tractor service r...ufjjjsekkkem
This document contains parts listings and component information for engines. It provides replacement part numbers and kits for engine parts, indicating the component, relevant serial number ranges, and repair operations (e.g. overhaul). It also includes quantity per tractor and reference numbers for components.
Kubota g1800 riding mower lawnmower parts catalogue manualfjskekmdm
The document provides instructions for parts books. It explains that the heading on parts pages will match the picture pages. It defines the column headings for part number pages including reference number, part number, description, quantity, serial number range, interchangeability, and remarks. It notes country codes that may be included and their meanings. An example page from a parts book is then shown listing specific part numbers, descriptions, quantities and other details.
096500-3091 explodido, lista de peças e plano bomba densoJunior Iung
This document provides parts list and specifications for a fuel injection pump. It includes:
1. A parts list spanning 3 pages that includes over 70 individual parts, their part numbers, manufacturers, quantities, and other details.
2. Test specifications for the injection pump including conditions, inspection procedures, adjustment steps, and target measurement values.
3. Manufacturing details for the pump such as the manufacturer, engine compatibility, rotation direction, injection order and interval.
Three piece body valves area multi-purpose ball valves. They tend to be used in more demanding applications where maintenance will be required on a more frequent basis than 2 piece valves. The 3 piece body's center section can be removed to allow the valve end caps to be welded without the possibility of damaging the valve seats. Any combination of end connections can be supplied to meet your custom requirements.
Kubota b2150 e tractor parts catalogue manualufjjjsekkkem
The document provides instructions and definitions for parts books. It defines column headings for part number pages including reference number, part number, description, quantity, serial number range and interchangeability. It notes country codes may be included and provides examples. The second page begins a sample parts listing for a B2150E engine with over 250 individual part numbers and descriptions.
This document provides a diagram and legend for the air conditioning system at the Chamchamal passenger station. The diagram shows the layout of pipes, tanks, pumps and other components of the chilled water and hot water systems. Lines with arrows indicate the flow of water throughout the station to components like air handling units, fan coils, and radiators for heating and cooling different areas. The legend defines all symbols used on the diagram to identify the various system elements.
Bobcat 853 skid steer loader parts catalogue manual (sn 509711001 & above)jfjkskemem
This document contains parts listings for various components of a machine. It includes 3 pages listing over 100 part numbers, descriptions, quantities and other details for items such as the main frame, operator cab, seat, rear door, and other assemblies. Serial numbers and remarks are provided for some parts. References to additional pages for some assemblies like the disc brake and hood kit are also included.
Kubota b2150 hsd tractor parts catalogue manualufjjjsekkkem
The document provides instructions for parts books. It defines the column headings used on parts book pages including reference number, part number, description, quantity, serial number range, interchangeability, and remarks. It notes country codes that may be included and explains what they mean. The document then provides an example page from a parts book with the defined columns listing specific part numbers and other details.
This document provides parts lists and specifications for engines. It includes 6 pages listing parts for components like the crankcase, timing case, and flywheel housing. Each part is specified by number, description, dimensions and quantity. The parts apply to different engine models and configurations, as identified by homologation type and machine numbers.
This document provides information on a line of tropical rooftop packaged air conditioning units from DAACPT. Key details include:
- The units have cooling capacities ranging from 9.6 kW to 188.5 kW.
- They feature hermetically sealed scroll compressors, galvanized steel panels, direct expansion coils, and centrifugal/axial fans.
- Various optional accessories are available like filters, insulation, gauges, and heating coils.
- Technical specifications include dimensions, weights, sound levels, refrigerants, and performance data at designated indoor/outdoor conditions.
This document provides technical specifications for rooftop packaged air conditioning units with nominal cooling capacities ranging from 8.9 kW to 105.1 kW. It includes key performance data for each model such as cooling/heating capacities, power consumption, current draw, efficiency ratings, component details, dimensions, sound levels and other specifications. The units utilize R410a refrigerant and have centrifugal fans, direct or belt driven depending on size. Control systems include microprocessor controllers and thermal expansion valves.
This document contains calculations for determining the required thickness of a cylindrical pressure vessel based on ASME code requirements. It provides the dimensions, material properties, and calculations for a cylindrical vessel with an outside diameter of 108.661 inches, wall thickness of 0.709 inches, and length of 720 inches made of SA-516 Grade 70 steel. The calculations determine the required minimum thickness, maximum internal pressure, and check that the actual thickness and pressure are acceptable according to the ASME code requirements for a cylindrical pressure vessel.
This document summarizes the welding procedure qualification record for oxy-fuel welding of carbon steel. It includes 3 key points:
1) The welding process qualified was oxy-fuel welding of a single-V groove weld in the horizontal position using an RG 60 filler metal between 3.5mm thick carbon steel plates.
2) Mechanical testing was performed including tensile and bend tests, which met the requirements of ASME Section IX. Macro examinations also showed acceptable results.
3) Hardness testing found the weld metal had an average hardness of 186.5 HV, while the HAZ areas were 155.5 HV and the base metal was 143 HV, demonstrating acceptable hardness across the joint.
The document provides information about products offered by PT. Tri Asa Pratama including pipe fittings, valves, gaskets, tubing, pipe, and grating. The company supplies products made of materials like carbon steel, stainless steel, and cast iron. Products are specified according to standards from organizations like ASTM, ASME, API, and MSS and are available in various sizes and pressure ratings. The document lists the types of products offered along with their specifications.
This document is a Welding Procedure Specification (WPS) that specifies the welding parameters and materials for a gas tungsten arc welding and shielded metal arc welding process. It lists the base metals, filler metals, welding positions, preheat and interpass temperatures, shielding gases, and electrical characteristics for two processes. Tables provide details on joint design, recorded welding parameters for each weld layer, and guidelines for heat treatment and qualified ranges according to the ASME Boiler and Pressure Vessel Code.
The document describes different types of tank heads available from Baker Tank Head including:
1) 2:1 Semi-Elliptical tank heads available in sizes from 6-5/8 to 192 inches in diameter and thicknesses from 3/16 to 2 inches.
2) ASME flanged and dished tank heads in standard and intermediate sizes from 14 to 250 inches with thicknesses from 3/16 to 1-3/8 inches.
3) The document provides specifications on several other types of ASME and non-ASME compliant tank heads varying in size, thickness, and construction.
This document discusses welding qualification requirements and procedures. It covers the need for welding procedures to be qualified according to applicable codes and standards. It also describes the process for qualifying welding procedures, which involves preparing a welding procedure specification, making a test weld coupon according to the WPS, performing mechanical tests on the coupon, and documenting the results in a procedure qualification record. The variables that determine whether a change requires requalification are also outlined.
This document provides an agenda and overview of a training program on the ASME Boiler and Pressure Vessel Codes. It discusses the objectives of codes and standards, highlights of the ASME Code system including sections I through XI, and introduces Section VIII Division 1 which governs pressure vessels. Key points covered include material requirements, design thickness calculation, weld joint categories, non-destructive testing requirements, and post-weld heat treatment stipulations. The training aims to help participants understand the application and requirements of the ASME pressure vessel codes.
This coupon test report summarizes the results of a welding qualification test. It includes details of the welding parameters, materials used, and test results. Six coupons were welded and tested for maximum load, staincile strength, and fracture location. The welder was qualified based on meeting the minimum tensile strength requirements. Additional remarks were provided on the bead, nick-break, and tensile strength tests.
Claas xerion 5000 4000 tractor parts catalogue manual (sn 78200011-78299999)dujfjjksekmmd
The document provides parts information for engine crankcases and suspensions for various Perkins and CAT engine models. It includes the part numbers, descriptions, dimensions and quantities of individual parts as well as the equipment and machine numbers they correspond to. The parts are listed in tables organized by part number, description, and other identifying information. Notes provide additional details on the applicable equipment and conditions.
Mc cormick fxl techno tier 2 (2003 2008) - rp52 - f95 fgexl tractor service r...ufjjjsekkkem
This document contains parts listings and component information for engines. It provides replacement part numbers and kits for engine parts, indicating the component, relevant serial number ranges, and repair operations (e.g. overhaul). It also includes quantity per tractor and reference numbers for components.
Kubota g1800 riding mower lawnmower parts catalogue manualfjskekmdm
The document provides instructions for parts books. It explains that the heading on parts pages will match the picture pages. It defines the column headings for part number pages including reference number, part number, description, quantity, serial number range, interchangeability, and remarks. It notes country codes that may be included and their meanings. An example page from a parts book is then shown listing specific part numbers, descriptions, quantities and other details.
096500-3091 explodido, lista de peças e plano bomba densoJunior Iung
This document provides parts list and specifications for a fuel injection pump. It includes:
1. A parts list spanning 3 pages that includes over 70 individual parts, their part numbers, manufacturers, quantities, and other details.
2. Test specifications for the injection pump including conditions, inspection procedures, adjustment steps, and target measurement values.
3. Manufacturing details for the pump such as the manufacturer, engine compatibility, rotation direction, injection order and interval.
Three piece body valves area multi-purpose ball valves. They tend to be used in more demanding applications where maintenance will be required on a more frequent basis than 2 piece valves. The 3 piece body's center section can be removed to allow the valve end caps to be welded without the possibility of damaging the valve seats. Any combination of end connections can be supplied to meet your custom requirements.
Kubota b2150 e tractor parts catalogue manualufjjjsekkkem
The document provides instructions and definitions for parts books. It defines column headings for part number pages including reference number, part number, description, quantity, serial number range and interchangeability. It notes country codes may be included and provides examples. The second page begins a sample parts listing for a B2150E engine with over 250 individual part numbers and descriptions.
This document provides a diagram and legend for the air conditioning system at the Chamchamal passenger station. The diagram shows the layout of pipes, tanks, pumps and other components of the chilled water and hot water systems. Lines with arrows indicate the flow of water throughout the station to components like air handling units, fan coils, and radiators for heating and cooling different areas. The legend defines all symbols used on the diagram to identify the various system elements.
Bobcat 853 skid steer loader parts catalogue manual (sn 509711001 & above)jfjkskemem
This document contains parts listings for various components of a machine. It includes 3 pages listing over 100 part numbers, descriptions, quantities and other details for items such as the main frame, operator cab, seat, rear door, and other assemblies. Serial numbers and remarks are provided for some parts. References to additional pages for some assemblies like the disc brake and hood kit are also included.
Kubota b2150 hsd tractor parts catalogue manualufjjjsekkkem
The document provides instructions for parts books. It defines the column headings used on parts book pages including reference number, part number, description, quantity, serial number range, interchangeability, and remarks. It notes country codes that may be included and explains what they mean. The document then provides an example page from a parts book with the defined columns listing specific part numbers and other details.
This document provides parts lists and specifications for engines. It includes 6 pages listing parts for components like the crankcase, timing case, and flywheel housing. Each part is specified by number, description, dimensions and quantity. The parts apply to different engine models and configurations, as identified by homologation type and machine numbers.
This document provides information on a line of tropical rooftop packaged air conditioning units from DAACPT. Key details include:
- The units have cooling capacities ranging from 9.6 kW to 188.5 kW.
- They feature hermetically sealed scroll compressors, galvanized steel panels, direct expansion coils, and centrifugal/axial fans.
- Various optional accessories are available like filters, insulation, gauges, and heating coils.
- Technical specifications include dimensions, weights, sound levels, refrigerants, and performance data at designated indoor/outdoor conditions.
This document provides technical specifications for rooftop packaged air conditioning units with nominal cooling capacities ranging from 8.9 kW to 105.1 kW. It includes key performance data for each model such as cooling/heating capacities, power consumption, current draw, efficiency ratings, component details, dimensions, sound levels and other specifications. The units utilize R410a refrigerant and have centrifugal fans, direct or belt driven depending on size. Control systems include microprocessor controllers and thermal expansion valves.
This document contains calculations for determining the required thickness of a cylindrical pressure vessel based on ASME code requirements. It provides the dimensions, material properties, and calculations for a cylindrical vessel with an outside diameter of 108.661 inches, wall thickness of 0.709 inches, and length of 720 inches made of SA-516 Grade 70 steel. The calculations determine the required minimum thickness, maximum internal pressure, and check that the actual thickness and pressure are acceptable according to the ASME code requirements for a cylindrical pressure vessel.
This document summarizes the welding procedure qualification record for oxy-fuel welding of carbon steel. It includes 3 key points:
1) The welding process qualified was oxy-fuel welding of a single-V groove weld in the horizontal position using an RG 60 filler metal between 3.5mm thick carbon steel plates.
2) Mechanical testing was performed including tensile and bend tests, which met the requirements of ASME Section IX. Macro examinations also showed acceptable results.
3) Hardness testing found the weld metal had an average hardness of 186.5 HV, while the HAZ areas were 155.5 HV and the base metal was 143 HV, demonstrating acceptable hardness across the joint.
The document provides information about products offered by PT. Tri Asa Pratama including pipe fittings, valves, gaskets, tubing, pipe, and grating. The company supplies products made of materials like carbon steel, stainless steel, and cast iron. Products are specified according to standards from organizations like ASTM, ASME, API, and MSS and are available in various sizes and pressure ratings. The document lists the types of products offered along with their specifications.
This document is a Welding Procedure Specification (WPS) that specifies the welding parameters and materials for a gas tungsten arc welding and shielded metal arc welding process. It lists the base metals, filler metals, welding positions, preheat and interpass temperatures, shielding gases, and electrical characteristics for two processes. Tables provide details on joint design, recorded welding parameters for each weld layer, and guidelines for heat treatment and qualified ranges according to the ASME Boiler and Pressure Vessel Code.
The document describes different types of tank heads available from Baker Tank Head including:
1) 2:1 Semi-Elliptical tank heads available in sizes from 6-5/8 to 192 inches in diameter and thicknesses from 3/16 to 2 inches.
2) ASME flanged and dished tank heads in standard and intermediate sizes from 14 to 250 inches with thicknesses from 3/16 to 1-3/8 inches.
3) The document provides specifications on several other types of ASME and non-ASME compliant tank heads varying in size, thickness, and construction.
This document discusses welding qualification requirements and procedures. It covers the need for welding procedures to be qualified according to applicable codes and standards. It also describes the process for qualifying welding procedures, which involves preparing a welding procedure specification, making a test weld coupon according to the WPS, performing mechanical tests on the coupon, and documenting the results in a procedure qualification record. The variables that determine whether a change requires requalification are also outlined.
This document provides an agenda and overview of a training program on the ASME Boiler and Pressure Vessel Codes. It discusses the objectives of codes and standards, highlights of the ASME Code system including sections I through XI, and introduces Section VIII Division 1 which governs pressure vessels. Key points covered include material requirements, design thickness calculation, weld joint categories, non-destructive testing requirements, and post-weld heat treatment stipulations. The training aims to help participants understand the application and requirements of the ASME pressure vessel codes.
This coupon test report summarizes the results of a welding qualification test. It includes details of the welding parameters, materials used, and test results. Six coupons were welded and tested for maximum load, staincile strength, and fracture location. The welder was qualified based on meeting the minimum tensile strength requirements. Additional remarks were provided on the bead, nick-break, and tensile strength tests.
Guide to understanding welding procedure specification (wpsTonni Bruce
this is my private data, i just want to translate some of documents that i just find on the internet into my language to easy to learn, so if anyone have the same native language with me they can use my book.
thanks for all
This document defines key terms related to welder and procedure qualification including welding procedure specification (WPS), procedure qualification record (PQR), welder performance qualification (WPQ), essential variables, non-essential variables, and supplementary essential variables. It also summarizes requirements for PQR, WPS, and WPQ review and discusses validity, expiration, renewal of welder qualifications, welding repairs, and applicable Aramco engineering procedures.
This document provides information on the essential variables and requirements for welder qualification according to ASME Section IX. It lists the key variables that must be specified for a welder qualification, including welding process, type, base metal, filler metal, and weld thickness limits. It also outlines the qualification requirements and limitations for weld position, diameter, progression, backing, and which filler and base metals a welder is qualified to use based on their test.
JGB Enterprises complete line of Industrial Cleaning Hoses including Rubber, PVC & Plastic suction, Sewer cleaning, Vacuum, Water washdown & Discharge Hoses, has never made waste transfer so easy to meet the needs of every individual waste management customer. JGB Enterprises supplies a multitude of accessories including aluminum, polypropylene, & stainless camlock quick couplers, hose clamps & tools, strainers & sight glasses, valves, and more!
Standard stock-materials-for-11k v-systemRamesh Meti
This document contains a schedule of rates for standard stock materials commonly used in 11kV power distribution systems. It lists 99 items, including poles, cross arms, insulators, conductors, clamps and other hardware. For each item it provides the name, material code, unit of measurement, and Ford rates from 2016-17 and 2018-19 inclusive of taxes, freight and insurance. The rates are provided in Indian Rupees (Rs).
The document describes different types of plate heat exchangers (PHEs) offered by a company, including their construction, design features, operating conditions, materials, and applications. The Totally Welded PHEs (SUPERMAX, ULTRAMAX, MAXCHANGER) provide high efficiency in a compact footprint compared to shell and tube exchangers. They have minimal maintenance requirements and can withstand high pressures and temperatures. The PHEs find applications in industries such as chemical, marine, power, and refrigeration.
This document provides information on various automotive tools including bench vises, grease guns, sockets, wrenches, and specialty tools for working under vehicles. It lists specific tools by product code and provides details on each tool such as materials, sizes, and intended applications. Overall, the document showcases a wide selection of tools for automotive repair and maintenance.
HDOT one of the topmost Manufacturing Units in IndiaGitanjali Singh
One of the esteemed fabrication units in India part of Hindustan Dorr Oliver; it manufactures several process equipments(solid liquid separation equipments, vacuum filtration products) utilised in water treatment plants, sewage treatment plants, ETPs, Pulp and paper mills, sugar plants, mineral processing units apart from food& beverages. Over and above it fabricated PVHE equipments for refineries, fertilisers, petrochemicals etc.
This document contains a list of various part numbers and corresponding quantities of items. There are over 200 part numbers listed from various brands such as Parker, Grainger, Dixon, Eaton, and others. The parts include hydraulic hose fittings, heater elements, face shield frames and visors, filters, and other industrial equipment components. Next to some part numbers are additional details like specifications, product descriptions, or remarks. The document appears to be an inventory or stock list of maintenance, repair, and operations (MRO) parts.
This physical inventory count sheet documents inventory for a company. It lists 101 inventory items along with their item numbers, descriptions, purchase prices, quantities on hand, and locations. The sheet was performed on an unspecified date and signed by an individual.
This document provides information on the Metaloterm® US concentric flue system for balanced flue gas stoves. It is made of stainless steel and combines the air inlet and flue in a modular system suitable for high temperature, non-condensing applications. The document describes the technical specifications, components, and typical installations of the flue system.
Pipe fitting . in Pipes and tubes manufatuers, supplier, dealer in mumbai ,i...DivyaDarshanMetallic
This document provides information on various stainless steel products including tubes, pipes, and sections. It lists the chemical compositions, mechanical properties, specifications, and grades of different stainless steel materials. Key details include outside diameter and wall thickness ranges, available lengths, common grades according to international standards, supply conditions, and applications in various industries.
This document appears to be a catalog listing various tools including:
- Pipe cutters for cutting various materials like plastic, copper, steel pipes
- Tube flaring tools for flaring ends of copper and light alloy pipes
- Welding equipment like gas welding handles and burners
- Reamers and deburrers for prepping pipe ends
- Shears and snips for cutting plastic pipes
- Accessories and replacement parts for the tools listed
The document contains technical specifications like dimensions and part numbers for each tool or accessory.
KuberTENes Birthday Bash Guadalajara - K8sGPT first impressionsVictor Morales
K8sGPT is a tool that analyzes and diagnoses Kubernetes clusters. This presentation was used to share the requirements and dependencies to deploy K8sGPT in a local environment.
A review on techniques and modelling methodologies used for checking electrom...nooriasukmaningtyas
The proper function of the integrated circuit (IC) in an inhibiting electromagnetic environment has always been a serious concern throughout the decades of revolution in the world of electronics, from disjunct devices to today’s integrated circuit technology, where billions of transistors are combined on a single chip. The automotive industry and smart vehicles in particular, are confronting design issues such as being prone to electromagnetic interference (EMI). Electronic control devices calculate incorrect outputs because of EMI and sensors give misleading values which can prove fatal in case of automotives. In this paper, the authors have non exhaustively tried to review research work concerned with the investigation of EMI in ICs and prediction of this EMI using various modelling methodologies and measurement setups.
Using recycled concrete aggregates (RCA) for pavements is crucial to achieving sustainability. Implementing RCA for new pavement can minimize carbon footprint, conserve natural resources, reduce harmful emissions, and lower life cycle costs. Compared to natural aggregate (NA), RCA pavement has fewer comprehensive studies and sustainability assessments.
Literature Review Basics and Understanding Reference Management.pptxDr Ramhari Poudyal
Three-day training on academic research focuses on analytical tools at United Technical College, supported by the University Grant Commission, Nepal. 24-26 May 2024
Electric vehicle and photovoltaic advanced roles in enhancing the financial p...IJECEIAES
Climate change's impact on the planet forced the United Nations and governments to promote green energies and electric transportation. The deployments of photovoltaic (PV) and electric vehicle (EV) systems gained stronger momentum due to their numerous advantages over fossil fuel types. The advantages go beyond sustainability to reach financial support and stability. The work in this paper introduces the hybrid system between PV and EV to support industrial and commercial plants. This paper covers the theoretical framework of the proposed hybrid system including the required equation to complete the cost analysis when PV and EV are present. In addition, the proposed design diagram which sets the priorities and requirements of the system is presented. The proposed approach allows setup to advance their power stability, especially during power outages. The presented information supports researchers and plant owners to complete the necessary analysis while promoting the deployment of clean energy. The result of a case study that represents a dairy milk farmer supports the theoretical works and highlights its advanced benefits to existing plants. The short return on investment of the proposed approach supports the paper's novelty approach for the sustainable electrical system. In addition, the proposed system allows for an isolated power setup without the need for a transmission line which enhances the safety of the electrical network
ACEP Magazine edition 4th launched on 05.06.2024Rahul
This document provides information about the third edition of the magazine "Sthapatya" published by the Association of Civil Engineers (Practicing) Aurangabad. It includes messages from current and past presidents of ACEP, memories and photos from past ACEP events, information on life time achievement awards given by ACEP, and a technical article on concrete maintenance, repairs and strengthening. The document highlights activities of ACEP and provides a technical educational article for members.
International Conference on NLP, Artificial Intelligence, Machine Learning an...gerogepatton
International Conference on NLP, Artificial Intelligence, Machine Learning and Applications (NLAIM 2024) offers a premier global platform for exchanging insights and findings in the theory, methodology, and applications of NLP, Artificial Intelligence, Machine Learning, and their applications. The conference seeks substantial contributions across all key domains of NLP, Artificial Intelligence, Machine Learning, and their practical applications, aiming to foster both theoretical advancements and real-world implementations. With a focus on facilitating collaboration between researchers and practitioners from academia and industry, the conference serves as a nexus for sharing the latest developments in the field.
Understanding Inductive Bias in Machine LearningSUTEJAS
This presentation explores the concept of inductive bias in machine learning. It explains how algorithms come with built-in assumptions and preferences that guide the learning process. You'll learn about the different types of inductive bias and how they can impact the performance and generalizability of machine learning models.
The presentation also covers the positive and negative aspects of inductive bias, along with strategies for mitigating potential drawbacks. We'll explore examples of how bias manifests in algorithms like neural networks and decision trees.
By understanding inductive bias, you can gain valuable insights into how machine learning models work and make informed decisions when building and deploying them.
IEEE Aerospace and Electronic Systems Society as a Graduate Student Member
03 work experience
1. Work Experience:
PRESSURE VESSELS:
Sr
No
Equipment
Desc. & No.
Vessel
Parameter
ID x TL-TL
(in mm)
Design
Temp.
°C
Design
Pre.
Kg/cm²g
Thickness
(in mm)
Code of
Constr.
MOC TPI Wt. (MT) Year
Shell D/End
1
Storage Sloped
Vessel 161V-604
For Oil Refinery
Ø1500 x
4500
100 3.5 14 14 ASME
SA 516
Gr. 70 N
SGS 24 2009
2
HP Flare Knockout
Drum for Oil Refinery
31V-025
Ø2500 x
8000
275 6.3 12 14 ASME
SA 516
Gr. 70
SGS 11.5 2010
3
Heater Decoking
Quench Drum for Oil
Refinery 121V-124
Ø1800 x
3100
400 3.5 14 16 ASME
SA 516
Gr. 70
SGS 8.6 2010
4
Spent Caustic
separating vessel for
Oil Refinery 74V-102
Ø2500 x
10000
85 3.68 8 10 ASME
SA 516
Gr. 60
SGS 10 2011
5
Atmospheric Vessel
for Oil Refinery
Ø1000 x
3190
250 5.3
10+3
Clad
10+3
Clad
ASME
SA 516
Gr. 70 +
SB 688
Clad
SGS 4.5 2011
6 Mercury Guard
Ø3300 x
5400
165 12.5 20 25 ASME
SA 516
Gr. 70
SGS 21.5 2013
7
Glycol Bleed Flasher
II Column
Ø3400 x
11200
170 1.8
18+3
Clad
18+4
Clad
ASME
SA 516
Gr. 70 +
SS 304
SGS 35 2013
2. PRESSURE VESSELS:
Sr No
Equipment
Desc. & No.
Vessel
Parameter
ID x TL-TL
(in mm)
Design
Temp.
°C
Design
Pre.
Kg/cm²g
Thickness
(in mm)
Code of
Constr.
MOC TPI Wt. (MT) Year
Shell D/End
8
Low Temperature
Drum II
Ø2200 x
4000
50 38.74 34,32 38 ASME
SA 240
304 L
AI / Linde 15.5 2014
9
Low Temperature
Drum I
Ø3000 x
6300
50 38.74 45 26 ASME
SA 240
304 L
AI / Linde 34 2014
10
Export Steam
Deaerator A/B
Ø3200 x
25970
204 35.69
10,16,
14,22
22 &
10
ASME
SA 204
304 L
SA 516
Gr. 70
AI / Technip 71 2014
11
Process Steam
System Deaerator
(Column)
Ø3200 x
24371
204 35.69
10,12,
14,20
16 ASME
SA 204
304 L
SA 516
Gr. 70
AI / Technip 31 2014
12 VPSA Adsorber A/F
Ø3100 x
5400
18/100 8.2 18 22 ASME
SA 516
Gr. 70
SGS 94 2014
13
Diesel Maximization
Stripper Receiver
Ø 3800 x
13000
55/170 10.5 17 + 3 22 + 4 ASME
SA 516
Gr. 70 N
+ SA 240
316 L
Cladding
SGS 38 2014
3. HEAT EXCHANGERS:
Sr
No
Equipment
Desc. & No.
Code of
Constrn.
Type
ID x L
(in mm)
Shell Side
Tube
side
Tube Sheet Tubes
TPI
WT
(MT)
Year
DP MOC DP
Thk
(mm)
MOC
Nos of
Tube
OD
(mm)
Thk
(mm)
MOC
1
Isomerization unit for
Oil Refinery 31E-005
ASME /
TEMA
Shell &
Tube
Ø650 x
6450
23 CS 23 66 CS 214 19.05 2.11 CS SGS 4.6 2008
2
Isomerization unit for
Oil Refinery 31E-006
ASME /
TEMA
Shell &
Tube
Ø750 x
6385
23 CS 23 74 CS 320 19.05 2.11 CS SGS 6.8 2008
3
Isomerization unit for
Oil Refinery 31E-010
ASME /
TEMA
Shell &
Tube
Ø1050 x
6760
44 CS 41 136 CS 525 19.05 2.11 CS SGS 6.8 2008
4
Isomerization unit for
Oil Refinery 31E-011
ASME /
TEMA
Shell &
Tube
Ø1350 x
8050
43 CS 41 170 CS 900 19.05 2.11 CS SGS 24.5 2009
5
Isomerization unit for
Oil Refinery 31E-019
ASME /
TEMA
Shell &
Tube
Ø950 x
5495
5 CS 17 83 CS 388 19.05 2.11 CS SGS 7.6 2009
6
DHDT Expansion
Project for Oil
Refinery 138E-006
(with Inconel overlay)
ASME /
TEMA
Shell &
Tube
Ø1360 x
8513
72
SA
387
Gr.
11
C12
93 100
SS
304L
599 19.05 2.11
SS
304L
SGS 20 2011
7
DHDT Expansion
Project for Oil
Refinery 138E-007
ASME /
TEMA
Shell &
Tube
Ø900 x
4921
92
SA
387
Gr.
11
CL 2
118 100
SA
213
Gr.
P11
109 19.05 2.11
SA
213
Gr.
P11
SGS 24 2011
8
Hot Combined Feed
Exchanger R 0126
ASME /
TEMA
Shell &
Tube
Ø1350 x
6624
34 CS 44 175 CS 1800 19.05 2.11
SA
179
SGS 40 2012
9
Feed Pre Heater
Stack Exchanger R
0132
ASME /
TEMA
Shell &
Tube
Ø1250 x
5350
34.2
SA
387
Gr.
11
CL 2
34.2 175
SA
213
Gr.
P11
956 19.05 2.11
SA
213
Gr.
P11
SGS 40 2012
10
Overhead Condenser
Stack Exchanger R
0196
ASME /
TEMA
Shell &
Tube
Ø1074 x
5097
10 CS 12 58 CS 694 25 2
SA
213
Gr.
P11
IOCL 19.5 2013
4. HEAT EXCHANGERS:
Sr
No
Equipment
Desc. & No.
Code of
Constrn.
Type
ID x L
(in mm)
Shell Side
Tube
side
Tube Sheet Tubes
TPI
WT
(MT)
Year
DP MOC DP
Thk
(mm)
MOC
Nos of
Tube
OD
(mm)
Thk
(mm)
MOC
11
Second Stage Cooler
Exchanger R 0199
ASME /
TEMA
Shell &
Tube
Ø1200 x
8390
14 CS 6 90 CS 1128 20 1.5
SA
213
Gr.
P11
SGS 14.2 2013
12
Cracker Project
Exchanger R 0204
ASME /
TEMA
Shell &
Tube
Ø1454 x
6020
18 CS 12 103 CS 1396 25.4 2.77
SA
179
EHE
S/RI
L
21.5 2013
13
Crude/LLGO CR
Stack Exchanger – 1
R 0210
ASME /
TEMA
Shell &
Tube
Ø1395 x
11736
51.5 CS 39.6 220
SA
266
CL 4
1099 25 2.5
SA
179
EIL 100 2013
14
Crude/HN PDT
Exchanger – R 0211
ASME /
TEMA
Shell &
Tube
Ø1200 x
7641
42 CS 15.2 145
SA
266
CL 4
514 25 2.5
SA
179
EIL 17.5 2013
15
Crude/HN LGO Stack
Exchanger – R 0212
ASME /
TEMA
Shell &
Tube
Ø1158 x
8041
54.6 CS 42 155
SA
266
CL 4
1432 25 2.5
SA
179
EIL 47 2013
16
Crude/HY KERO
PDT Exchanger – R
0213
ASME /
TEMA
Shell &
Tube
Ø1118 x
7931
54.6 CS 42 155
SA
266
CL 4
625 25 2.5
SA
179
EIL 21.5 2013
17
Crude/LL VGO CR
Exchanger – R 0214
ASME /
TEMA
Shell &
Tube
Ø1639 x
5407
42 CS 32.3 220
SA
266
CL 4
1482 25 2.5
SA
179
EIL 50 2013
18
Crude/LVGO PDT
Exchanger – R 0215
ASME /
TEMA
Shell &
Tube
Ø1470 x
11309
42 CS 32.3 175
SA
266
CL 4
1139 25 2.5
SA
179
EIL 47 2013
19
Crude/LGO CR
Exchanger II – R
0216
ASME /
TEMA
Shell &
Tube
Ø1430 x
11637
51.5 CS 39.6 245
SA
266
CL 4
1097 25 2.5
SA
179
EIL 52 2013
5. HEAT EXCHANGERS:
Sr
No
Equipment
Desc. & No.
Code of
Constrn.
Type
ID x L
(in
mm)
Shell Side
Tube
side
Tube Sheet Tubes TPI
WT
(MT)
Year
DP MOC DP
Thk
(mm)
MOC
Nos of
Tube
OD
(mm)
Thk
(mm)
MOC
20
Crude/LGO CR
Exchanger I – R
0217 A/B/C/D
ASME /
TEMA
Shell
&
Tube
Ø1395
x
11736
51.5 CS 39.6 220
SA 266
CL 4
1099 25 2.5 SA 179 EIL 200 2013
21
STRIPPER
REBOILER & R
0288 A/B
ASME /
TEMA
Shell
&
Tube
Ø 3275
X
11806
6 C.S 40 300
SA 266
GR 2 N +
SA 240
304 L
(CLAD)
2376
25.0
4
1.65
SA 213
304L
S.S
M/S
SAIPEM
104 2014
22
DMW
PREHEATER &
R 0289 A/B
ASME /
TEMA
Shell
&
Tube
Ø1480
X
15016
13 S.S 40 224
SA 182
GR F 304
L
2677
19.0
5
1.65
SA 213
TP 304L
M/S
SAIPEM
84 2014
23
3RD INTER
STAGE
COOLER & R
0294 A/B
ASME /
TEMA
Shell
&
Tube
Ø 1400
X 6316
18 C.S 8 70
SA 266
GR 2
3564
12.0
7
1.65
SA
179.CS
M/S
SAIPEM
31
2014
24
1ST INTER
STAGE
COOLER & R
0296 A/B
ASME /
TEMA
Shell
&
Tube
Ø 520
X 4563
25 C.S 8 70
SA 266
GR 2
412 12.7 1.65
SA .179
CS
M/S
SAIPEM
4.2
2014
25
INERT VENT
GAS CHILLER &
R 0299 A/B
ASME /
TEMA
Shell
&
Tube
Ø 900
X 4287
25
C.S
25
49
SA 266
GR 2
208
19.0
5
2.1
SA
179.CS
M/S
SAIPEM
4.7
2014
26
AMOMONIA
PRODUCT
HEATER & R
0300 A/B
ASME /
TEMA
Shell
&
Tube
Ø 490
X 7878
25
C.S
30
52
SA 266
GR 2
230
19.0
5
2.11
SA
179.C S
M/S
SAIPEM
6
2014
27
PROCESS
CONDENSATE
FEED & R 0301
A - F
ASME /
TEMA
Shell
&
Tube
Ø 540
X 8322
49
S.S
51 100
SA 182
GR F 304
L
570
12.0
7
1.65
SA 213
TP 304L
M/S
SAIPEM
33
2014
6. Jobs Executed In House:
Sr
No
Equipment
Desc. & No.
Size
(in mm)
MOC Client TPI Quantity Year
1 Tow Cans 1900 x 1900 x 3000 Ht SS 304 + IS 2062
Alok Ind
Selvassa
Client
70 nos
(110 MT)
2012
2
Chimneys
Self-supported & Structure
supported
51 mtr H&30 mtr Ht IS 2062
Rajashree
Polyfils
Client
2 nos
(55 MT)
2011
3 Yarn Chimneys 1400 x 400 x 5000 Ht Aluminium
Kejriwal
Surat
Client 90 nos 2011
4 Metal Shell Rolls Ø 150 x 1300 L IS 2062
Rajashree
Polyfils
Client 1275 nos 2011
5 Ladders & Platforms for Columns IS 2062
RIL
Dahej
Client 22 MT 2012
6 Yarn Chimneys 1500 x 400 x 5100 Ht SS 304 Bhilosa Client 192 nos 2012
7 Impeller F/Quench Blower IS 2062 RIL Surat Client 02 2012
8 Tube Bundle Kit E 8054 Ø 211 x 1560 L x 258 nos of Tubes SS 321 RIL Surat
Bureau
Veritas
02 2013
9 Tube Bundle Complete E 8052 Ø 320 x 1412 L x 604 nos of Tubes SS 321 RIL Surat
Bureau
Veritas
02 2013
10 Heat Exchanger Complete E 8054 Ø 253 x 1828 L x 258 nos of Tubes SS 321 RIL Surat
Bureau
Veritas
02 2013
11 Tanks 130 KL, 110 KL, 95 KL, 30 KL & 9.5 KL CS & SS 304
Elixir Engg.
Mumbai
Client 05 2013
12 FD Fan Hood Assly L7.95 Mtr x W 3.85 Mtr x H 3.85 Mtr IS 2062 RIL Surat Client 01 2013
13 Dryer Feed Assly Ø 3.66 Mtr x 5.48 Mtr Long SS 304 RIL Surat Client 02 2013
14 Distributor Feed Assly Pipe Spool SS 310 RIL Surat Client 03 2013
15 Reflux Feed Assly Pipe Spool SS 310 RIL Surat Client 02 2013
16 Bare Induced Draft fan Type 4.068 Mtr x 4.1 Mtr x 2.76 Mtr IS 2062 Gr. B
Garden Silk
Mills
Client
1 -
Dynamic
Load 8
Ton
2013
7. 17 3rd Stage Spray Packed Tower Ø 1Mtr x 9Mtr Ht CS SA 516 Gr. 70 RIL Surat
Bureau
Veritas
01 2013
18 Cyclone Separator Ø .55Mtr x 1.8Mtr Ht CS SA 516 Gr. 70 RIL Surat
Bureau
Veritas
01 2013
19 Self Support Chimney Ø 4.6Mtr x 58Mtr Ht IS 2062
Rajashree
Polyfils
Client 01 2013
20
Dome Jacketed Bottom for
Preheater
Ø 1220mm x 545mm Ht CS + SS 304 RIL Surat
Bureau
Veritas
01 2014
21 Foot Over Bridge 35 Mtr L x 2.5 Mtr W x 13.5 Mtr Ht IS 2062 SMC Surat Client 01 2014
22 Tube Bundle Kit E 7028 Ø 195 x 1535 L x 60 nos of Tubes SS 321 RIL Surat
Bureau
Veritas
01 2014
23 Tube Bundle Kit E 1127 Ø 320 x 3510 L x 26 nos of Tubes
CS + CuNIi Overlay
+ Tubes Copper,
Baffles Naval Brass
RIL Surat
Bureau
Veritas
02 2014
24 Lube Oil Cooler Ø 412 x 3515 L x 278 nos of Tubes
SS 400 + CuNIi
Overlay + Finned
Tubes CuNi
RIL Surat
Bureau
Veritas
01 2014
25 Steel Structure (Pre Fab) Lot CS Gokuldham Client
200 M
Tons
2014
26 Dipping Chemical Tank (Jacketed) Ø 2.36 Mtr x 3.68 Mtr Ht CS + SS 304
Rajashree
Polyfils
Client 01 2014
27 Master Batch Tank (Jacketed) Ø 2.28 Mtr x 3 Mtr Ht CS + SS 304
Rajashree
Polyfils
Client 01 2014
28 Exhaust Ducts Lot SS 202
Rajashree
Polyfils
Client 40 Tons 2014
29 Column Ladder & Platform Lot CS RIL Surat Client 20 Tons 2014
30 Gas Liquid Separator Ø 100 x 3000 Ht SS 316L BARC Client 01 2014
31 Ammonia Condenser Ø 890 x 7315 Ht CS J & J Client 01 2014
32 Metallic Shell Rolls Ø 163 x 1600 Lg CS
Rajashree
Polyfils
Client 180 2014
33 Tow Can 1.9 x 1.9 x 2.8 Ht SS 304 Keytex Client 72 2015
34 Concentric Reducer Ø 2400/3600 x 2060 Ht CS to SS Clad MTS TUV 01 2015
35
Brine Preheater Dia 800mm M.U.W
Plant
Ø 800 x7102 L x 344 nos of Tubes
SA 516 Gr. 70
Titanium
JNJ Client 01 2015
36
Brine Preheater Dia 530mm M.U.W
Plant
Ø 530 x 6890 L x 278 152 nos of Tubes
SA 516 Gr. 70
Titanium
JNJ Client 01 2015
8. 37
Brine Preheater Dia 350mm M.U.W
Plant
Ø 350 x 6690 L x 52 nos of Tubes
SA 516 Gr. 70
Titanium
JNJ Client 01 2015
38 Dowtherm Boiler Ø 620 x 1608 L x 122 nos of “U” Tubes
SA 516 Gr. 70
SA 214
RPL Client/TUV 02 2015
39 Dowtherm Boiler Ø 850 x 3004 L x 274 nos of “U” Tubes
SA 516 Gr. 70
SA 214
RPL Client/TUV 02 2015
40 Dowtherm Boiler Ø 620 x 2313 L x 122 nos of “U” Tubes
SA 516 Gr. 70
SA 214
RPL Client/TUV 02 2015
Jobs Under Execution In House:
1
Vent Gas Scrubber Complete
Package (EPC)
Skid Mounted System CS & SS 304 Ril Client 01 2015
2 Tube Bundle for Air Cooler E8053 Ø 566 x 3000 L x 235 nos of Tubes
SA 182 F 304
SA 213 TP 304
Ril TUV 03 2015
3
Tube Bundle for Closed Loop
Water Cooler
Ø 194.5 x 1535 L x 60 nos of Tubes
SA 240 TP 321
SA 213 TP 321
Ril TUV 01 2015
4 Dome Fix Side Ø 525 x 590 Lg SA 240 TP 304 Ril TUV 01 2015
5 Stripper Bottom Flash Drum Ø 1100 x 3850 Lg SA 240 TP 316L Ril BV 01 2015
6 Freon Receiver Ø 500 x 2775 Lg SA 516 Gr. 70 JNJ Client 02 2015
7 Shell & Tube Condenser Ø 450 x 2400 L x 116 nos of Tubes
SA 516 Gr. 70
CuNi 70/30
JNJ Client 02 2015
8 SFO Tank 4KL with Limpet Coil Ø 1600 x 2968 H SA 240 TP 304 SPL Client 03 2015
9 SFO Tank 4 KL without Limpet Coil Ø 1600 x 2968 H SA 240 TP 304 SPL Client 04 2015
10
SFO Tank 650 Ltr without Limpet
Coil
Ø 800 x 1825 H SA 240 TP 304 SPL Client 03 2015
11 Dowtherm Blowdown Tank Ø 2500 x 4970 L SA 516 Gr. 70 SPL Client 01 2015