The document provides a specification warranty for VIRO products from Polymindo Permata, PT. It warrants that VIRO products will be free from defects like cracking, peeling, and breaking for 3 years and resistant to fading, weathering, and aging for 3 years. However, slight color variations may occur between batches. The company is not liable for indirect damages and the sole remedy is a refund of the purchase price. Test reports from several institutions confirm the mechanical properties and weather resistance of VIRO products.
This presentation contains basic information about cast iron and galvanized iron pipes, with their sizes, manufacturing method and types available in market.
All the information has been taken and compiled from various sources only for educational purpose
Similarities and Differences in the university education for architectsDebbie Bentley
Extract of Academic Research paper discussing the difference between NAAB and RIBA validation (2014). Presented at RIBA-USA New York. Questions the cost of UK architectural education and the validation/ accreditation process in both countries vs what is actually being taught in architecture schools.
Various types of gates, their important componentsIEI GSC
Presentation on Various types of gates, their important components was done by Shri D.K.Mehta, Retired Chief Engineer, CWC, during One Day Seminar on Safety Inspection and O & M of gates for dams, canals etc conducted by Gujarat State Center of The Institution of Engineers (India) at Ahmedabad on July 3, 2015.
Video of this presentation can be seen on facebook as well as Youtube page of IEIGSC.
A building is provided with a drainage system to discharge effectively the sewage of the building into the public sewer. Domestic sewage from a building includes human excreta as well as discharge from the bathroom, kitchen, etc. and collected by building sewers and finally discharged into the public sewer.
Causes for Pressure Surge
Consequences of Surge
Few Definitions
Analysis of Pressure Surge
Variation of wavespeed with pipeline characteristics
System Protection against Surge
System Design Solutions
Selection of System for Surge Protection
Performance of condenser and effect of vacuum in 120MW thermal power plant.pp...ali13jf1a0321
the purpose of present project is to analyze the performance of condenser at 120MW thermal power plant and comparisons made with partial loads 116 MW and 110MW.
by ujjawal sharma
What is MEPIn the construction world, MEP stands for “mechanical, electrical and plumbing.” MEP engineering is the science and art of planning, designing and managing the MEP systems of a building. MEP systems:MEP (Mechanical, Electrical & Plumbing) covers the whole range of building services. Building services are the systems, installed in buildings that make them comfortable, functional, efficient, and safe. MEP systems are generally not part of the constructional elements of a building, but do interfere with the building envelope. Also, MEP components like piping and ducts can be integrated in (prefab) building elements
This presentation contains basic information about cast iron and galvanized iron pipes, with their sizes, manufacturing method and types available in market.
All the information has been taken and compiled from various sources only for educational purpose
Similarities and Differences in the university education for architectsDebbie Bentley
Extract of Academic Research paper discussing the difference between NAAB and RIBA validation (2014). Presented at RIBA-USA New York. Questions the cost of UK architectural education and the validation/ accreditation process in both countries vs what is actually being taught in architecture schools.
Various types of gates, their important componentsIEI GSC
Presentation on Various types of gates, their important components was done by Shri D.K.Mehta, Retired Chief Engineer, CWC, during One Day Seminar on Safety Inspection and O & M of gates for dams, canals etc conducted by Gujarat State Center of The Institution of Engineers (India) at Ahmedabad on July 3, 2015.
Video of this presentation can be seen on facebook as well as Youtube page of IEIGSC.
A building is provided with a drainage system to discharge effectively the sewage of the building into the public sewer. Domestic sewage from a building includes human excreta as well as discharge from the bathroom, kitchen, etc. and collected by building sewers and finally discharged into the public sewer.
Causes for Pressure Surge
Consequences of Surge
Few Definitions
Analysis of Pressure Surge
Variation of wavespeed with pipeline characteristics
System Protection against Surge
System Design Solutions
Selection of System for Surge Protection
Performance of condenser and effect of vacuum in 120MW thermal power plant.pp...ali13jf1a0321
the purpose of present project is to analyze the performance of condenser at 120MW thermal power plant and comparisons made with partial loads 116 MW and 110MW.
by ujjawal sharma
What is MEPIn the construction world, MEP stands for “mechanical, electrical and plumbing.” MEP engineering is the science and art of planning, designing and managing the MEP systems of a building. MEP systems:MEP (Mechanical, Electrical & Plumbing) covers the whole range of building services. Building services are the systems, installed in buildings that make them comfortable, functional, efficient, and safe. MEP systems are generally not part of the constructional elements of a building, but do interfere with the building envelope. Also, MEP components like piping and ducts can be integrated in (prefab) building elements
Inventa compounding group -june-2016 m-web & linked inAsis Banerjie
Leading Innovation with Engineered Plastics for Performance and Cost reduction. We do most complex Polymer compounding research to commercialization. INVENTA Polymer is an agile & flexible company with practical economics in mind. Client satisfaction via continuous Learning and Improvement is our work policy.
Radiation-Cured Components & Their Use in Hard, Scratch Resistant Coating App...Sartomer
This presentation covers the following topics:
- Current and potential hard coat applications
- Description of products tested and their attributes
- Taber haze and Taber abrasion resistance
- Weathering resistance
- Barrier properties of a typical hard coat formulation
- Polyurethane dispersion products (PUDs)
You can visit Sartomer at Sartomer.com and follow them on Twitter @SartomerGlobal and on LinkedIn.
The Eco protect pp cartridge filters are designed using thermally bonded 100% polypropylene microfiber for superior chemical resistance and high purity filtration. The spun filter cartridge is an economical variant that is widely used for taste, odour and colour removal from liquids. It has a broad thermal and chemical compatibility; hence is a popular choice for applications that involve chemicals or operations at high temperatures. The cartridge filter is not only economical but also leaves a smaller footprint as it is very easy and safe to dispose the equipment via incineration, shredding and compaction.
Why Western Polyrub tubing?
Which is available from Peroxide and Platinum Cured Rubber Compound.
Available in Colored or Translucent Material and also metal detachable
We can extrude smallest size tubing from 0.020 ID x 0.050 OD.
We can extrude larger size tubing from 6inch Outsize Diameter.
Available Wall Thickness of tubing 0.015 to 0.625.
Available Hardness range of tubing 20 to 80 shores A.
Tubing available in cut to length.
Tubing available in following grade to Complies FDA 21 CFR177.2600, USP CL-VI, NSF STD-51, UL, A-A59588 EC1935/2004, Military/Industrial, and Commercial specification.
* Most standard size of tubing is available in stock. Please feel free to request a free quotation.
RO Protect Extreme is a Spun filter cartridge with a sturdy core and a graded pore structure for extreme filtration efficiency. This is a Weld free continuous length filter variant with thermal seal caps free of binders and adhesives. The variant is also available in a grooved pattern with increased surface area for a lower clean pressure drop, increased dirt holding capacity and longer life.
Momentive has launched two new products, ECC3011 and ECC3051S conformal coatings that can withstand harsh operating conditions, helping to prevent the occurrence of corrosion on vital PCB components and surfaces.
This data sheet and properties information has been uploaded and shared by Emco Industrial Plastics. This plastics distributor, manufacturer and fabrication company has everything that you need for your engineering and tooling needs.
To purchase Delrin AF visit http://www.emcoplastics.com/materials/delrin/delrin-af-100/
ORDERING INFORMATION
No minimum quantity orders, all orders are accepted. Until credit is established, all orders are shipped on a pre-pay basis. We accept most major credit cards including Visa, Master Card and American Express. Check and C.O.D. are also accepted.
To order call: 773-283-2914
You may also fax your order to 773-283-3085 at any time.
OR e-mail your order to primedental@hotmail.com
Office Hours: Monday through Friday: 7:00am – 5:00pm CST
PLEASE SELECT A CATEGORY FROM THE RIGHT COLUMN TO VIEW ITS PRODUCTS.
ViroBuild @V2|Studio Bali ...
Virofiber, the leading maker of synthetic wicker,
has launch an innovative synthetic thatch solution that is Fire Retardant, Pest Free and 100% Recyclable.
Virothatch uses a reproduction process that replicates Balinese thatch-work artistry.
Why is Virothatch better than natural thatching synthetic
products?
• Totally maintenance free ...
• Does not mold, rot, decay or shed ...
• Resists termites, birds and other pests ...
• Installation costs are low, since no specialized craftsmen are needed for installation ...
• Low wind load rating makes it breathable in high winds ...
• Does not fade or discolor ...
• Built-in fire retardant ...
• 100% recyclable since it’s made of one material, HDPE (Not usege PVC Material) ...
ViroBuild @V2|Studio Bali ...
Virofiber, the leading maker of synthetic wicker,
has launch an innovative synthetic thatch solution that is Fire Retardant, Pest Free and 100% Recyclable.
Virothatch uses a reproduction process that replicates Balinese thatch-work artistry.
Why is Virothatch better than natural thatching synthetic
products?
• Totally maintenance free ...
• Does not mold, rot, decay or shed ...
• Resists termites, birds and other pests ...
• Installation costs are low, since no specialized craftsmen are needed for installation ...
• Low wind load rating makes it breathable in high winds ...
• Does not fade or discolor ...
• Built-in fire retardant ...
• 100% recyclable since it’s made of one material, HDPE (Not usege PVC Material) ...
1. VIRO SPECIFICATION WARRANTY
Polymindo Permata, PT provides the Specification Warranty of VIRO
products as follows :
● Polymindo Permata, PT warrants that under normal use and proper care,
VIRO products will be free from defects of cracking, peeling and
breaking for 3 (three) years from time of delivery. The above warranty
does not cover failure or damage caused by improper applications, and
unreasonable, or abusive use.
● Polymindo Permata, PT warrants that under normal use and proper care,
VIRO products are designed to withstand fading, weathering and ageing
for 3 (three) years from time of delivery. However, color pigmentation
can affect the color consistency of VIRO products, so there may be
slight color variations between production batches. Such variations are
unavoidable, but Polymindo Permata, PT will exert its best efforts to
ensure color consistency and keep the variations to an acceptable level.
● Polymindo Permata, PT will not be liable for incidental, consequential or
indirect damages for negligence, infringement of warranty, strict
liability or contract arising in connection with VIRO products.
● The customer’s sole remedy and Polymindo Permata, PT’s sole liability
for any claims will be the customer’s purchase price.
NOTE : VIRO’s test reports are provided by Sentra Teknologi Polimer
(Polymer Technology Center), Indonesia, The Productivity and
Standards Board (PSB), Singapore and Q-LAB Weathering Research
Service, Arizona USA.
IMPORTANT : This document must be read in conjunction with our
conditions of sale. As a condition of a placement of any
order, we assume that the customer has fully read and
agreed to all of the above conditions.
2. MECHANICAL AND PHYSICAL PROPERTY SPECIFICATIONS
OF POLYROD AND POLYPEEL
The mechanical and physical properties of POLYROD and POLYPEEL have
been tested by the Sentra Teknologi Polimer (Polymer Technology Center),
Indonesia and the Productivity and Standard Board (PSB), Singapore in
accordance with the test methods issued by the American Society for
Testing and Materials (ASTM) and the International Organization for
Standardization (ISO).
The mechanical and physical properties of POLYROD and POLYPEEL have
been tested as follows:
MECHANICAL PROPERTY
TYPE OF TEST VALUE UNIT TEST METHOD
Tensile strength 33.44 MPa ASTM D638 – 98
Elongation at break 772.6 % ASTM D638 – 98
Tensile modulus 957 MPa ASTM D638 – 98
Yield stress 24.55 MPa ASTM D638 - 98
Charpy impact strength 84.80 KJ/m2
ISO 179 – 97
Shore D hardness (1 second) 67.8 ASTM D 2240 – 95
Shore D hardness (15 second) 58.3 ASTM D 2240 – 95
Vicat softening point (50 N load) 84.25 0
C ASTM D 1525 – 95
Flexural modulus 2,036 MPa ASTM D790 – 98
Flexural strength 29.24 MPa ASTM D790 – 98
Compressive strength 169.7 MPa ASTM D695 – 96
Yield stress (compressive) 48.91 MPa ASTM D695 - 96
Heat deflection temperature
(Heating rate : 120 o
C/hour)
46.4 0
C ASTM D648 – 96
Glass Transition Temperature - 95 0
C
Differential scanning
Calorimetric analysis
(DSC)
Coefficient of thermal
expansion
(30 – 60 0
C)
(100 – 113 0
C)
108
750
10-6
/K
10-6
/K
ASTM E831 – 93
ASTM E831 – 93
3. PHYSICAL PROPERTY
PROPERTY VALUE UNIT TEST METHOD
Density 0.9545 g/cm3
ASTM D792 – 98
Flammability (burning rate of
sample)
19.9 mm/min ASTM D635 – 98
Water absorption 51
ppm
weight
ASTM D570 – 95
Chemical resistance (change in
weight)
a. Sea water (pH.7.6)
b. Swimming pool water (pH 7.1)
c. 2 % detergent (pH 7.6)
d. 5 % citric acid
e. 5 % NH4 OH (ammonium
hydroxide)
f. 20 % sulfuric acid
0.0216
0.0259
0.0115
0.0023
0.0076
0.0006
%
%
%
%
%
%
ASTM D543 - 95
Chemical resistance (change in
volume)
a. Sea water (pH.7.6)
b. Swimming pool water (pH 7.1)
c. 2 % detergent (pH 7.6)
d. 5 % citric acid
e. 5 % NH4 OH (ammonium
hydroxide)
f. 20 % sulfuric acid
0.2279
0.2507
0.4206
0.1260
0.1426
0.2403
%
%
%
%
%
%
ASTM D543 - 95
4. ACCELERATED WEATHERING TEST
Polyrod and Polypeel products were tested for accelerated weathering by the
Singapore Productivity and Standards Board in accordance with the test
methods issued by the International Organization for Standardization (ISO) and
the American Society for Testing and Materials (ASTM). The test condition and
results are as follows:
Test Method:
1. ISO 4892- 2: 1994
Test Condition:
Apparatus used : Xenon test Beta LM
Operating Cycle : 5 mins rain followed by 25 mins rainfree
Light source (Continuous) : Xenon lamps NXE 2200
Filter system : Xenochrome 300 in suprax cylinder
UV irradiance : 80± 5 W/m2
at 300 to 400 nm
Black standard temperature : 55 ± 5° C (dry cycle)
Air temperature in test enclosure : 30 ± 3° C
Relative humidity in test enclosure : 75 ± 5%
Test duration : 2000 hours
2. ISO 105A02: 1993
“Grey Scale for Assessing Change in Color”
3. ASTM D523- 89 (Reapproved 1999)
“Specular Gloss”
Geometry: 60°
ACCELERATED WEATHERING (XENON ARC) TEST
Test Duration
(Light hours)
Result
1000
No change in color (Grey Scale 5)
99.2% gloss retention
2000
No change in color (Grey scale 5)
3.4% gloss retention
Remarks:
The Grey Scale for assessing color change ranges from 1 to 5:
5: No perceived difference in color between the tested
and untested specimens.
1: Greatest contrast in color between the tested and
untested specimens.
5. FAQ
Q : Is VIRO suitable for year-round outdoor use?
A : Yes. VIRO is designed to be insensitive to temperature differences
ranging from -70° to 80° C.
Q : Won’t the color of VIRO fade?
A : No. VIRO fiber won’t fade, even if it’s exposed to extreme weather
conditions during summer and winter. It’s been proven in laboratory
tests that VIRO can withstand UV exposure for three years.
Q : Is VIRO safe for the environment?
A : Yes. VIRO fiber is made from polyethylene, which is non-toxic (even
when burned, no toxic substances are generated) and 100% recyclable.
Q : Does VIRO require special cleaning and maintenance?
A : No special maintenance is required. Simply clean using a wet cloth.
an occasional cleaning using soap or a mild detergent is also
recommended.
Q : Does VIRO offer a broad range of colors, shapes and textures?
A : Yes! VIRO offers many different choices for our customers.
Q : Can we put VIRO in outdoor for the whole year?
A : Yes, VIRO is designed to be insensitive to temperature differences
ranging from – 70 o
C to 80 o
C