MILLING MACHINE PPT 4: MILLING CUTTERS BY POLAYYA CHINTADA

1. LENDI INSTITUTE OF ENGINEERING
AND TECHNOLOGY
METAL CUTTING AND MACHINE TOOLS
COURSE CODE: C302
REGULATION: R16
3rd BTECH 1st SEM
PREPARED BY :
POLAYYA CHINTADA M.TECH,M.B.A,(PhD)
ASSISTANT PROFESSOR
TOPIC:
MILLING CUTTERS

2. MILLING CUTTERS:

3. PLAINMILLING CUTTERS :
MILLING CUTTERS:

4. PLAINMILLING CUTTERS :
MILLING CUTTERS:

5. Side MILLING CUTTERS :
MILLING CUTTERS:

6. Side MILLING CUTTERS :
MILLING CUTTERS:
Half Side MILLING CUTTERS:

7. Side MILLING CUTTERS :
MILLING CUTTERS:
StaggeredteethMILLING CUTTERS:
These cutters may carry alternate cutters on the
periphery
These alternate teethes are of opposite helix angle,
staggered from side to side just as the teeth of wood
saw, and cut alternatively on one side and on the other
 used for keyway and slot cutting
 they prove very efficient in milling deep slots but
narrow in width

8. Side MILLING CUTTERS :
MILLING CUTTERS:
Inter locking teeth MILLING CUTTERS:

9. MILLING CUTTERS:
End MILLING CUTTERS :

10. MILLING CUTTERS:
End MILLING CUTTERS :
Some of the end milling cutters are as follows
Common type
Two lipped end milling cutter
Shell end milling cutter

11. MILLING CUTTERS:
End MILLING CUTTERS :
Twolippedendmillingcutter

12. MILLING CUTTERS:
End MILLING CUTTERS :
Shell endmillingcutter

13. MILLING CUTTERS:
FACE MILLING CUTTERS:

14. MILLING CUTTERS:
METAL SLITTINGSAW MILLING CUTTERS:

15. MILLING CUTTERS:
ANGLE MILLING CUTTERS:

16. MILLING CUTTERS:
ANGLE MILLING CUTTERS:
DOUBLEANGLE MILLING CUTTERS:

17. MILLING CUTTERS:
T-SLOTMILLING CUTTERS:

18. MILLING CUTTERS:
WOOD RUFFKEY MILLING CUTTERS:

19. MILLING CUTTERS:
Form MILLING CUTTERS :

20. MILLING CUTTERS:
FormMILLING CUTTERS:
Corner rounding CUTTERS:

21. MILLING CUTTERS:
FormMILLING CUTTERS:
Concaveand convexCUTTERS:

22. MILLING CUTTERS:
FormMILLING CUTTERS:
Gear CUTTERS :

23. MILLING CUTTERS:
FormMILLING CUTTERS:
Tap & reamer fluting cutter:

24. MILLING CUTTERS:
FormMILLING CUTTERS:
Flycutter:

25. Yours:
POLAYYA CHINTADA M.TECH,M.B.A,(PhD)
ASSISTANT PROFESSOR