2. Saudi Aramco: Company General Use
2
SAFETYā¦..is part of everyday living. It is an important consideration for
everyone in everything he does, in the home, at work or play, on streets and
highways ā wherever he goes.
Safe operating practices and procedures are vital in the Oil Industry business
because the work is hazardous, involving massive machinery, heavy tools and
great physical strength.
Always give careful consideration to:
Manā¦..
Machineā¦..
Environmentā¦..
And, the interaction of each with the other!!
3. Saudi Aramco: Company General Use
ā¢ Using the wrong tool for
the job
ā¢ Using a cutter as a
screwdriver
ā¢ Hammering a cutter
through thick material
ā¢ Modifying cutters to defeat
safety devices
Hand injuries are likely when the wrong tool is used
or the right tool is used improperly
Unsafe Work Practice!!
4. Saudi Aramco: Company General Use
They all involved hand tools, BUT the right procedures or best work methods were
not always followed
RESULTING IN
THIS! OR EVEN THIS!THIS!
5. Saudi Aramco: Company General Use
ļ½ Hand injuries can be associated with working with
machinery or equipment
ļ½ The materials being used or the job process
might be hazardous
ļ½ Hand tools or powered hand tools may be faulty or
improperly used
6. Saudi Aramco: Company General Use
The most common causes of hand injuries are:
ā¦ Carelessness
ā¦ Lack of awareness
ā¦ Boredom
ā¦ Disregard for safety procedures
ā¦ Distractions
7. Saudi Aramco: Company General Use
To avoid hand injuries:
ā¦ Know the hazards and dangers in the job to be done
ā¦ Be aware of pinch points
ā¦ Be aware of hot areas
ā¦ Be aware of rotating or moving surfaces
ā¦ Automated machinery may be controlled by remote
control, or delayed timing devices that cause the machine
to start automatically
ā¦ Loose clothing and jewelry may be caught up in moving
machinery
ā¦ Never remove machine safeguards or operate machinery
with safeguards removed
8. Saudi Aramco: Company General Use
Punctures
Extreme
temperatures
Cuts
Pinch points
ChemicalsRotating
equipment
Vibrating
equipment
Insect bites
9. Saudi Aramco: Company General Use
Some real life pictures
Now look and discuss the procedures for the following pictures.
Give additional ideas to make them correct
incorrect Better
If you saw practices like these, what would you do?
PINCH
POINT
Pinch point
STOP
ā¦for Safety
10. Saudi Aramco: Company General Use
Never dispose of used razor blades, broken glass, or other
sharp objects in regular trash cans! Keep a metal can
specifically for disposal of sharp objects.
11. Saudi Aramco: Company General Use
Glove Uses
Cotton Light duty material handling and cleanup work
Leather Equipment handling, general construction, heavy
cleanup, welding, moderately hot or cold material
handling
High Voltage tested Normally for Electrical works
Rubber, nitrile,
neoprene, PVC,
PVA .
Chemical gloves must be chosen for the specific
chemical being used
Insulated Extreme high and low temperatures
12. Saudi Aramco: Company General Use
With a little time and consideration we have the ability to
reduce or eliminate a high proportion of these injuries,
Hand tools have been designed with a special purpose, use
these tools as they have been designed, if the job requires a
specific tool use that tool do not improvise.
If you see someone doing it wrong STOP the job and explain
why a few minutes now saves a long time to heal later
How many times have you used tools and pinched your fingers at work or at home?.
There are many ways to keep your hands out of harms way. Lets discuss the at-risk behaviors that some exhibit while working on site. Many will use tools for uses other than those recommended by the manufacturer who designed them. For example, using an unguarded utility knife to cut weatherproofing places the employee at greater risk of a laceration to the hand or puncture to the arm or cut thick material by hammering a safety cutter through it. It is also important that you never modify your safety cutter in any way. This can result in a serious malfunction of the tool.
This slide will run automatically when slide is clicked onto this one is an attention grabber and shock tactics do work extremely well.
When the main text is showing click on the space bar to start the injuries sequence.
This slide needs to be linked to the finger injuries campaign run last year.it is important to explain to the crews that most tool injuries are to hands and fingers (this is why they are called HAND tools)
Please be sure to warn them that there are some graphic pictures on this slide
The first slide is a man using a punch, the incorrect and better pictures will be displayed. Look at the incorrect picture and get class feed back as to the hazards.
When this is complete click the mouse and the next slide will appear. There is a total of 4 slides to look at give some emphasis to the man using the drill as he already has a sticky plaster on his finger from doing it wrong before.
When all the 4 slides are finished, click mouse-space-or direction arrow to get the bottom line come up. Get crew to give you the answer (by using the stop system).then click on mouse again and the stop sign emphasis on the stop system needs to be given here. Some slides have additional pointers with regard to pinch points and tool direction arrows the better slides are not perfect as you can see more hazards in the back ground this could also be pointed out as an exercise by getting crews to give the correct practice.
This is the final slide and should be read through with some conviction especially emphasizing the stop section
Always remember that without hand tools we cannot perform the tasks we do BUT tools can be dangerous so beware!
Ask the question
how many times have you used tools and pinched your fingers at work or at home?.