The document outlines the specifications and features of the tuboretm series of sterile ball valves designed for industries such as pharmaceutical and bioprocessing. These valves comply with ASME BPE standards, ensuring sterility and cleanability, and utilize compliant materials to minimize contamination risks. Key attributes include a wide range of sizes, customizable surface finishes, and options for various actuation methods.

1. Inspired By Challenge
TuBore™
sanitary valves

2. 2
Floating Ball Valves
TuBore™ valves
TuBore™ valves General
ASME BPE
standard
DIN 11850
standard
ISO 1127
standard
Ordering code
system
Introduction
48 series - the TuBore™ line
The TuBore™ series is Habonim’s line of sterile ball valves for the pharmaceutical, bioprocessing, food and beverage
industries. The valves comply with ASME BPE standard for applications in which sterility, cleanability and drainability are
essential for product quality.
Because the TuBore™ valve port diameter is identical to the tube inner diameter, no expansion or contraction can take
place inside the system resulting in full drainage and no traces that could cause contamination. The TuBore™ line excels at
maximum flow capacity and minimum pressure drop and provides low-torque tight shutoff.
The TuBore™ series is grouped into three geometric designs according to the ASME BPE, DIN 11850 and ISO 1127 tube
dimension specifications.
Only FDA and USP Class VI compliant polymers or elastomers are used in the TuBore™ series.
To avoid rouging on austenitic stainless steel surfaces and corrosion attack on welding areas, low ferrite cast or forged bar
materials are used and polished. Upon request, electro-polished surface finishes are available.
Purge and drain ports are available upon request to facilitate CIP/SIP operation.
Diverter and various multiportconfigurations based on the TuBore™ model are also available.
Technical summary
48 series TuBore™
Size range 1/4"- 6" (DN8 - DN150) Series depended
Pressure range Vacuum 10-6
Tor to 50 bar (750 psi)
Temperature range -60 °C to +230 °C (-76 °F to +446 °F)
Materials Stainless steel A351 CF3M, A479 316L, EN 10222-5 1.4435, Alloy C22, Alloy C276
End connections Welded, clamped
Operation Lever or gear operated, pneumatic or electric actuation
Service Pharmaceutical , bioprocessing, cosmetics, food & beverage
Standards of compliance
Factory certification ISO 9001-2008 Quality management system
Valve design & tests ASME BPE Valve design
DIN 11850 (Range 2) Stainless steel tubes - Dimensions and tolerances
ISO 1127 Stainless steel tubes - Dimensions and tolerances
EN 12266-1, API 598 Testing of metallic valves - Pressure tests, test procedures and
acceptance criteria.
Certifications API 607, ISO 10497 Testing of valves - Fire type-testing requirements
ISO 15848-1 Industrial valves - measurement, test and qualification
procedures for fugitive emissions
PED 97/23/EC Module H Pressure equipment directive
ATEX 94/9/EC Equipment and protective systems intended for use in
potentially explosive atmospheres (optional for actuated unit
only)
Documentation EN 10204 2.2 / 3.1 / 3.2 Metallic materials - types of inspection documents

3. 3
TuBore™ valves
TuBore™ valves
Polishing and Electro-polishing
To minimize contamination and to avoid corrosion/rouging problems, inner
surfaces which come into direct or indirect contact with the flow media are
polished and, upon request, electro-polished.
For cast/forged valves the body, ball, seat retainer (2”size and above) and
the end connections are polished internally. For rolled bar valves, additional
polishing is carried out the body and end connections outer surfaces.
When requested, electro-polishing is carried out on the body, ball, seat retainer
(2”size and above) and end connections.
The standard TuBore™ line polishing level is 0.625 µ-m (25 µ-in) Ra max. Higher
levels of surface finish up to 0.375 µ-m (15 µ-in) Ra max are available, including
internal and external electro-polishing.
Habonim does not use Animal Derived Ingredients (ADI's) in its surface
finishing processes.
General
HermetiX™ TFM stem seal
Durable polymer anti-abrasion ring
Durable polymer thrust seal
FDA approved material
seats and seals
Sanitary clamp end
SF2 - Standard internal
polishing level of 0.625 μ-m
(25 μ-in) Ra max
Austenitic cast
materials with
ferrite content < 2%
Extended aend for
orbital welding
End-to-End continuous and
identical bore diameter
Castings or forgings are only
applicable to ASME BPE standard
Austenitic materials with
controlled Sulfur
0.005% < S < 0.017 %
Ra Reading for Metallic Contact Surfaces
Product
ASME BPE
Surface designation
Ra Max. Habonim
µ-in. µ-m Code
SF1 20 0.51 G32
SF2* 25 0.64 G24
Mechanically Polished and Electropolished
ASME BPE
Surface designation
Ra Max. Habonim
µ-in. µ-m Code
SF4 15 0.38 E32
SF5 20 0.51 E24
SF6 25 0.64 E18
* SF2 is the TuBore™ line standard surface finish,
no need to add 'G24' suffix
48X series TuBore™
with ISO 15848-1 certified stem seal

4. 4
Floating Ball Valves
TuBore™ valves
TuBore™ valves General
ASME BPE
standard
DIN 11850
standard
ISO 1127
standard
Ordering code
system
Austenitic ferrite content
To avoid rouging on austenitic stainless steel surfaces and corrosion attack on welding areas, low ferrite cast or forged bar
materials are used. The standard TuBore™ cast valves have a ferrite level of < 2%, and the TuBore™ forged bar valves < 1%.
Effect of sulfur % on orbital welds
Orbital welding provides precise control of the arc gap and thus better control of the heat input, allowing for uniform
penetration. Orbital welds are typically carried out as a single-pass weld using a square-butt end preparation. The TuBore™
one-piece, solid, extended welded ends are accurately machined and designed with sufficient length to allow free
movement of the orbital welding machine around the circumference. The result: a quality weld and minimum labor time.
For critical applications using small-diameter, thin-walled tubing, low-sulfur materials with sulfur concentrations of 0.001-
0.005% are routinely and successfully welded, including allowances made for higher weld bead width-to-depth ratio.
However, the more complex welding procedures and the specialized personnel required to achieve these exceptional
surface finish and corrosion resistance specifications involve extra costs. Thus the standard Habonim’s TuBore™ 316L/CF3M
welded ends have a controlled sulfur content of 0.005-0.017%.
TF316 slide bearing
Durable polymer anti-abrasion ring
Durable polymer anti-abrasion ring
HermetiX™ TFM stem seal
Durable polymer thrust seal
SF2 - Standard internal
polishing level of 0.625 μ-m
(25 μ-in) Ra max
Extended tube end
for orbital welding
End-to-End continuous and
identical bore diameter
One size up short bolts minimizes
thermal expansion
Austenitic forged
materials with ferrite
content < 2%
FDA approved seats material
Secondary graphite seal encapsulated
in a dry unpressurized area
FDA approved primary seals material
48G series - Graphite-free fire safe
and ISO 15848-1 certified valve
Austenitic materials
with controlled Sulfur
0.005% < S < 0.017 %

5. 5
TuBore™ valves
TuBore™ valves
General
Cleaning and Assembling
Habonim’s meticulous cleaning, assembly and inspection procedure for the TuBore™ line ensures the stringent cleanliness
required by Bioprocessing, Pharmaceutical and Oxygen services.
Habonim uses a state of the art, environmentally friendly, alkaline-based automatic degreasing system with multiple stages
of cleaning, rinsing and drying chambers to ensure that particles, grease, metal chips and other contamination hazards that
can be introduced by a poor debarring process or shop dirt are removed thoroughly before the assembly process begins.
Upon completion of the cleaning process, the valves are assembled in an oil free restricted area by qualified personnel
who are specially trained to perform this task. The employees wear clean working clothes and latex gloves throughout the
procedure. The equipment and tools are cleaned before use and the work surfaces are covered with a clean polyethylene
sheet before performing the valve assembly.
Testing and packaging
All valves are 100% helium leak tested according to the EN 1779 vacuum test method - A.3 Leakage ≤ 1E-6 Pa*m3/sec.
Packaging is done in the same cleanroom where the cleaning process was completed. Finished (dry, completed, inspected
and approved) valve end connections are capped with non-shedding end caps. Finished valves are removed from the
cleanroom environment only after being bagged and sealed in a clean polyethylene bag.
TF316 slide bearing
Durable polymer thrust seal
SF2 - Standard internal
polishing level of 0.625 μ-m
(25 μ-in) Ra max
Austenitic rolled bar
materials with ferrite
content < 1%
Standard external polishing
level of 0.8 μ-m Ra max
Valve design to tube dimensions
according to DIN 11850 and ISO 1127
standard are made from rolled bar only
Austenitic materials
with controlled Sulfur
0.005% < S < 0.017 %
Secondary graphite seal encapsulated in
a dry unpressurized area
One size up short bolts minimizes thermal expansion
FDA approved primary seals material
HermetiX™ TFM stem seal
FDA approved seats material
End-to-End continuous
and identical bore diameter
48G series - External and internal polish bar
made valve line, Graphite-free fire safe
and ISO 15848-1 certified valve

6. S
H
D
C
K
OD
B
A-ETO
ID
A-TC
R
TxL thread
F PCD
ø W
TuBore™ valves General
ASME BPE
standard
DIN 11850
standard
ISO 1127
standard
Ordering code
system
6
Floating Ball Valves
TuBore™ valves
Valve dimensions
Size 1
⁄2”- 11
⁄2” | DN15-DN40 | Class 300 | 48X/48(1)
Series
TuBore™
size Unit OD ID A ETO A TC B C D H K S W R TC M N P F TxL
Weight
kg/lb
Kv
Cv
DN15 mm 12.70 9.40 137.00 89.00 20.60 29.00 38.00 61.60 41.50 150.00 31.80 25.20 5.54 3/8"
UNF
6.50 (F03) 36.00
M5X10
0.90 8
1/2" inch 0.50 0.37 5.39 3.50 0.81 1.14 1.50 2.42 1.63 5.91 1.25 0.99 0.22 0.26 1.42 2.00 9
DN20 mm 19.05 15.75 147.00 102.00 24.60 36.00 45.00 67.90 43.90 150.00 38.10 25.20 5.54 3/8"
UNF
7.10 (F03) 36.00
M5X10
1.00 29
3/4" inch 0.75 0.62 5.79 4.00 0.97 1.42 1.77 2.67 1.73 5.91 1.50 0.99 0.22 0.28 1.42 2.10 34
DN25 mm 25.40 22.10 168.00 118.00 35.50 43.50 61.00 84.80 43.90 187.00 44.50 50.40 7.54 7/8"
UNF
9.20 (F04) 42.00
M5X10
1.70 53
1" inch 1.00 0.87 6.61 4.65 1.40 1.71 2.41 3.34 1.73 7.36 1.75 1.98 0.30 0.36 1.65 3.80 62
DN40 mm 38.10 34.80 186.00 141.00 50.00 55.50 85.00 107.10 44.00 236.00 57.20 50.40 8.71 9/16"
UNF
13.00 (F05) 50.00
M6X12
3.50 150
11/2" inch 1.50 1.37 7.31 5.57 1.97 2.19 3.35 4.22 1.73 9.29 2.25 1.98 0.34 0.51 1.97 7.70 175

7. 8
17
18
3
1
5
6
2
19
14
15
13
12
10
16
7
4
9
11
2
2
2
6
5
7a
7
TuBore™ valves
TuBore™ valves
Components & materials
Size 1
⁄2”- 11
⁄2” | DN15-DN40 | Class 300 | 48X/48(1)
Series
Item Description Material specification Qty.
10 Follower B783 316L 1
11 Disc spring A693 631 17-7PH 2
12 Stem nut DIN 3506 A4-80, A194 Gr 8M 1
13 Locking clip A164 8, 8A 1
14 Handle S.St. A240 430 1
15 Serrated washer A194 6 1
16 Handle nut DIN 3506 A4-80, A194 Gr 8M 1
17 Sleeve PVC 1
18 Body bolt EN 3506-1 A4-80, A193 Gr B8M 4
19 Body nut DIN 3506 A4-80, A194 Gr 8M 4
20 Anti static spring A313 302 1
21 Anti static plunger A479 304 1
23 Tag (not shown) A167 304 1
* Repair kit components
** Only with HermetiX™ stem seal
Item Description Material specification Qty.
1
Body A351 CF3M, EN 10222-5 1.4435, A494
CW-12MW, A494 CX-2MW
1
2
Ends A351 CF3M, EN 10222-5 1.4435, A494
CW-12MW, A494 CX-2MW
2
3
Ball A351 CF3M, A479 316L, B574 N06022,
B574 N10276,
1
4
Stem A479 316L, A564 Gr.630 H1150D 17-
4PH, B574 N06022, B574 N10276
1
5* Seat TFM, Virgin PEEK 2
6* Body seal PTFE 2
7* Stem thrust seal Virgin PEEK, TFM(2)
1
7a** Anti-abrasion ring Virgin PEEK, TFM(2)
1
8 Stop pin A582 303 1
9* Stem seal TFM 1
(1)
48 Series is Habonim's standard valve design without the HermetiX™
stem seal construction.
(2)
This material cannot be used as part of the 48X or 48G design.

8. TxL thread
F PCD
ø W
S
H
D
C
K
OD
B
A-ETO
ID
A-TC
R
Preparation
for actuation
DD
P
Stem grooves
show valve
ball position
Square
N thread N thread
Q M M
M
8
Floating Ball Valves
TuBore™ valves
Valve dimensions
TuBore™
size Unit OD ID A ETO A TC B C D H K S W R TC M M-DD N P F TxL
Weight
kg/lb
Kv
Cv
DN50 mm 50.80 47.50 223.00 184.00 72.70 70.00 112.10 143.10 45.00 256.00 84.00 64.20 - 13.90
M20
31.15 (F07) 70.00
M8X10
9.40 410
2" inch 2.00 1.87 8.77 7.23 2.86 2.76 4.41 5.63 1.77 10.08 3.31 2.53 - 0.55 1.23 2.76 20.80 480
DN65 mm 63.50 60.20 250.40 169.10 83.35 98.30 144.90 185.10 57.20 401.00 139.70 77.40 18.90 15.90 1" -14
UNS-2A
16.60 (F10) 102.00
M10X10
13.70 581
21/2" inch 2.50 2.37 10.00 6.66 3.28 3.87 5.70 7.29 2.25 15.79 5.50 3.05 0.74 0.63 0.65 4.02 30.30 680
DN80 mm 76.20 72.90 302.00 193.00 96.40 105.50 152.20 192.40 70.00 401.00 160.00 90.90 18.90 15.90 1" -14
UNS-2A
16.60 (F10) 102.00
M10X10
17.70 748
3" inch 3.00 2.87 11.90 7.60 3.80 4.15 5.99 7.57 2.75 15.79 6.30 3.58 0.74 0.63 0.65 4.02 39.10 875
DN100 mm 101.60 97.38 317.50 236.20 123.00 124.00 170.60 210.80 61.00 619.00 200.00 118.90 18.90 15.90 1" -14
UNS-2A
16.60 (F10) 102.00
M10X12
31.30 1333
4" inch 4.00 3.83 12.50 9.30 4.84 4.88 6.71 8.30 2.40 24.37 7.87 4.68 0.74 0.63 0.65 4.02 69.20 1560
DN150 mm 152.40 146.86 460.00 328.00 180.00 179.00 248.50 303.00 82.00 916.50 380.00 166.50 28.45 23.75 11/2"-12
UNF-1A
16.60 (F12) 125.00
M12X20
78.00 3218
6" inch 6.00 5.78 18.11 12.91 7.09 7.05 9.78 11.93 3.23 36.08 14.96 6.56 1.12 0.94 0.65 4.92 172.00 3765
TuBore™ valves General
ASME BPE
standard
DIN 11850
standard
ISO 1127
standard
Ordering code
system
Size 2”- 6” | DN50-DN150 | Class 300 | 48X/48(1)
Series

9. 8
17
18
3
1
5
6
2
19
14A
14
13
12
10
16
7
4
9
2
2
2
6
5
7a
14A
6A
9
TuBore™ valves
TuBore™ valves
Components & materials
Size 2”- 6” | DN50-DN150 | Class 300 | 48X/48(1)
Series
Item Description Material specification Qty.
10 Follower B783 316L 1
11 Disc spring A693 631 17-7PH 2
12 Stem nut DIN 3506 A4-80, A194 Gr 8M 1
13 Tab lock washer A240 304 1
14 Handle S.St. A240 316/316L 1
14A Stop plate A240 430 1
14B Wrench head A351 CF8M 1
16 Wrench bolt A194 B8, DIN 3506 A2-70 1
17 Sleeve PVC 1
18 Body bolt EN 3506-1 A4-80, A193 Gr B8M 4
19 Body nut DIN 3506 A4-80, A194 Gr 8M 4
20 Anti static spring A313 302 1
21 Anti static plunger A479 304 1
23 Tag (not shown) A167 304 1
* Repair kit components
** Only with HermetiX™ stem seal
Item Description Material specification Qty.
1
Body A351 CF3M, EN 10222-5 1.4435, A494
CW-12MW, A494 CX-2MW
1
2
Ends A351 CF3M, EN 10222-5 1.4435, A494
CW-12MW, A494 CX-2MW
2
3
Ball A351 CF3M, A479 316L, B574 N06022,
B574 N10276,
1
4
Stem A479 316L, A564 Gr.630 H1150D 17-
4PH, B574 N06022, B574 N10276
1
5* Seat TFM, Virgin PEEK 2
6* Body seal PTFE 2
6A Support ring A479 316L, B574 N06022 1
7* Stem thrust seal Virgin PEEK, TFM(2)
1
7a** Anti-abrasion ring Virgin PEEK, TFM(2)
1
8 Stop pin A582 303 1
9* Stem seal TFM 1
(1)
48 Series is Habonim's standard valve design without the HermetiX™
stem seal construction.
(2)
This material cannot be used as part of the 48X or 48G design.

10. S
H
D
C
K
OD
B
A-ETO
ID
A-TC
R
ø W
TxL thread
F PCD
Preparation
for actuation
M
N thread
P
P
Stem flats
show valve
ball position
½”, ¾"
without nut
1" - 1½”
with nut
Size 1
⁄2”- 11
⁄2” | DN15-DN40 | Class 300 | 48G Series
10
Floating Ball Valves
TuBore™ valves
Valve dimensions
TuBore™
size Unit OD ID A ETO A TC B C D H K S W R TC M N P F TxL
Weight
kg/lb
Kv
Cv
DN15 mm 12.70 9.40 137.00 89.00 20.60 29.00 38.00 61.60 41.50 150.00 31.80 25.20 5.54 3/8"
UNF
6.50 (F03) 36.00
M5X10
0.90 8
1/2" inch 0.50 0.37 5.39 3.50 0.81 1.14 1.50 2.42 1.63 5.91 1.25 0.99 0.22 0.26 1.42 2.00 9
DN20 mm 19.05 15.75 147.00 102.00 24.60 36.00 45.00 67.90 43.90 150.00 38.10 25.20 5.54 3/8"
UNF
7.10 (F03) 36.00
M5X10
1.00 29
3/4" inch 0.75 0.62 5.79 4.00 0.97 1.42 1.77 2.67 1.73 5.91 1.50 0.99 0.22 0.28 1.42 2.10 34
DN25 mm 25.40 22.10 168.00 118.00 35.50 43.50 61.00 84.80 43.90 187.00 44.50 50.40 7.54 7/8"
UNF
9.20 (F04) 42.00
M5X10
1.70 53
1" inch 1.00 0.87 6.61 4.65 1.40 1.71 2.41 3.34 1.73 7.36 1.75 1.98 0.30 0.36 1.65 3.80 62
DN40 mm 38.10 34.80 186.00 141.00 50.00 55.50 85.00 107.10 44.00 236.00 57.20 50.40 8.71 9/16"
UNF
13.00 (F05) 50.00
M6X12
3.50 150
11/2" inch 1.50 1.37 7.31 5.57 1.97 2.19 3.35 4.22 1.73 9.29 2.25 1.98 0.34 0.51 1.97 7.70 175
TuBore™ valves General
ASME BPE
standard
DIN 11850
standard
ISO 1127
standard
Ordering code
system

11. Size 1
⁄2”- 11
⁄2” | DN15-DN40 | Class 300 | 48G Series
8
17
18
3
1
5
6
2
1814
15
13
12
10
16
7
4
9
11
2
2
2
6
5
7a
10A
6A
6A
11
TuBore™ valves
TuBore™ valves
Components & materials
Item Description Material specification Qty.
10 Follower B783 316L 1
10A* Slide bearing TF316 1
11 Disc spring A693 631 17-7PH 2
12 Stem nut DIN 3506 A4-80, A194 Gr 8M 1
13 Locking clip A164 8, 8A 1
14 Handle S.St. A240 430 1
15 Serrated washer A194 6 1
16 Handle nut DIN 3506 A4-80, A194 Gr 8M 1
17 Sleeve PVC 1
18 Body bolt EN 3506-1 A4-80, A193 Gr B8M 8
20 Anti static spring A313 302 1
21 Anti static plunger A479 304 1
23 Tag (not shown) A167 304 1
* Repair kit components
Item Description Material specification Qty.
1
Body A351 CF3M, EN 10222-5 1.4435, A494
CW-12MW, A494 CX-2MW
1
2
Ends A351 CF3M, EN 10222-5 1.4435, A494
CW-12MW, A494 CX-2MW
2
3
Ball A351 CF3M, A479 316L, B574 N06022,
B574 N10276
1
4
Stem A479 316L, A564 Gr.630 H1150D 17-
4PH, B574 N06022, B574 N10276
1
5* Seat TFM, Virgin PEEK 2
6* Body inner seal PTFE 2
6B* Body outer seal Graphite 2
7* Stem thrust seal Virgin PEEK 1
7a* Anti-abrasion ring Virgin PEEK 1
8 Stop pin A582 303 1
9* Stem seal TFM 1

12. TxL thread
F PCD
ø W
S
H
OD
B
A-ETO
ID
A-TC
R
K
D
C
Preparation
for actuation
DD
P
Stem grooves
show valve
ball position
Square
N thread N thread
Q M M
M
12
Floating Ball Valves
TuBore™ valves
Valve dimensions
Size 2”- 6” | DN50-DN150 | Class 300 | 48G Series
TuBore™
size Unit OD ID A ETO A TC B C D H K S W R TC M M-DD N P F TxL
Weight
kg/lb
Kv
Cv
DN50 mm 50.80 47.50 223.00 184.00 72.70 70.00 112.10 143.10 45.00 256.00 84.00 64.20 - 13.90
M20
31.15 (F07) 70.00
M8X10
9.40 410
2" inch 2.00 1.87 8.77 7.23 2.86 2.76 4.41 5.63 1.77 10.08 3.31 2.53 - 0.55 1.23 2.76 20.80 480
DN65 mm 63.50 60.20 250.40 169.10 83.35 98.30 144.90 185.10 57.20 401.00 139.70 77.40 18.90 15.90 1" -14
UNS-2A
16.60 (F10) 102.00
M10X10
13.70 581
21/2" inch 2.50 2.37 10.00 6.66 3.28 3.87 5.70 7.29 2.25 15.79 5.50 3.05 0.74 0.63 0.65 4.02 30.30 680
DN80 mm 76.20 72.90 302.00 193.00 96.40 105.50 152.20 192.40 70.00 401.00 160.00 90.90 18.90 15.90 1" -14
UNS-2A
16.60 (F10) 102.00
M10X10
17.70 748
3" inch 3.00 2.87 11.90 7.60 3.80 4.15 5.99 7.57 2.75 15.79 6.30 3.58 0.74 0.63 0.65 4.02 39.10 875
DN100 mm 101.60 97.38 317.50 236.20 123.00 124.00 170.60 210.80 61.00 619.00 200.00 118.90 18.90 15.90 1" -14
UNS-2A
16.60 (F10) 102.00
M10X12
31.30 1333
4" inch 4.00 3.83 12.50 9.30 4.84 4.88 6.71 8.30 2.40 24.37 7.87 4.68 0.74 0.63 0.65 4.02 69.20 1560
DN150 mm 152.40 146.86 460.00 328.00 180.00 179.00 248.50 303.00 82.00 916.50 380.00 166.50 28.45 23.75 11/2"-12
UNF-1A
16.60 (F12) 125.00
M12X20
78.00 3218
6" inch 6.00 5.78 18.11 12.91 7.09 7.05 9.78 11.93 3.23 36.08 14.96 6.56 1.12 0.94 0.65 4.92 172.00 3765
TuBore™ valves General
ASME BPE
standard
DIN 11850
standard
ISO 1127
standard
Ordering code
system

13. 8
17
18
3
1
5
6
2
18
14A
14
13
12
10
16
7
4
9
2
2
2
6
5
7a
14B
10A
6A
6A
6B
13
TuBore™ valves
TuBore™ valves
Components & materials
Size 2”- 6” | DN50-DN150 | Class 300 | 48G Series
Item Description Material specification Qty.
10 Follower B783 316L 1
10A* Slide bearing TF316 1
11 Disc spring A693 631 17-7PH 2
12 Stem nut DIN 3506 A4-80, A194 Gr 8M 1
13 Tab lock washer A240 304 1
14 Handle S.St. A240 316/316L 1
14A Stop plate A240 430 1
14B Wrench head A351 CF8M 1
16 Wrench bolt A194 B8, DIN 3506 A2-70 1
17 Sleeve PVC 1
18 Body bolt EN 3506-1 A4-80, A193 Gr B8M 4
20 Anti static spring A313 302 1
21 Anti static plunger A479 304 1
23 Tag (not shown) A167 304 1
* Repair kit components
Item Description Material specification Qty.
1
Body A351 CF3M, EN 10222-5 1.4435, A494
CW-12MW, A494 CX-2MW
1
2
Ends A351 CF3M, EN 10222-5 1.4435, A494
CW-12MW, A494 CX-2MW
2
3
Ball A351 CF3M, A479 316L, B574 N06022,
B574 N10276
1
4
Stem A479 316L, A564 Gr.630 H1150D 17-
4PH, B574 N06022, B574 N10276
1
5* Seat TFM, Virgin PEEK 2
6* Body seal PTFE 2
6A Support ring A479 316L, B574 N06022 1
6B* Body outer seal Graphite 2
7* Stem thrust seal Virgin PEEK 1
7a** Anti-abrasion ring Virgin PEEK 1
8 Stop pin A582 303 1
9* Stem seal TFM 1

14. S
H
D
C
K
OD
B
A-ETD
ID
A-TCD
R
TxL thread
F PCD
ø W F2
F1
Preparation
for actuation
M
N thread
P
P
Stem flats
show valve
ball position
½”, ¾"
without nut
1" - 1½”
with nut
14
Floating Ball Valves
TuBore™ valves
Valve dimensions
TuBore™ valves General
ASME BPE
standard
DIN 11850
standard
ISO 1127
standard
Ordering code
system
Size 1
⁄2”- 11
⁄2” | DN15-DN40 | 48X / 48(1)
Series
TuBore™
size Unit OD ID A ETO A TC B C D H K S W R TC M N P F1 F2 TxL
Weight
kg/lb
Kv
Cv
DN10 mm 13.00 10.00 100.00 90.00 20.60 29.00 38.00 46.30 41.50 115.00 69.00 34.00 5.54 3/8" UNF
7.20 - 32.00
M5X6
1.00 9
3/8" inch 0.51 0.39 3.94 3.54 0.81 1.14 1.50 1.82 1.63 4.53 2.72 1.34 0.22 0.28 - 1.26 2.20 10
DN15 mm 19.00 16.00 110.00 95.00 24.60 36.00 45.00 49.40 44.00 115.00 69.00 34.00 5.54 3/8" UNF
7.20 15.00 32.00
M5X6
1.30 30
1/2" inch 0.75 0.63 4.33 3.74 0.97 1.42 1.77 1.94 1.73 4.53 2.72 1.34 0.22 0.28 0.59 1.26 2.85 35
DN20 mm 23.00 20.00 120.00 110.00 31.70 36.00 45.00 61.00 44.00 146.00 79.00 34.00 7.54 7/8" UNF
7.20 20.00 36.00
M5X8
2.20 48
3/4" inch 0.91 0.79 4.72 4.33 1.25 1.42 1.77 2.40 1.73 5.75 3.11 1.34 0.30 0.28 0.79 1.42 4.85 56
DN25 mm 29.00 26.00 180.00 130.00 41.30 43.50 61.00 85.00 44.00 187.00 94.00 50.50 7.54 7/8" UNF
7.20 29.70 29.70
M5X8
2.80 97
1" inch 1.14 1.02 7.09 5.12 1.63 1.71 2.41 3.35 1.73 7.36 3.70 1.99 0.30 0.28 1.17 1.17 6.20 114
DN32 mm 35.00 32.00 190.00 140.00 48.40 55.50 85.00 99.00 46.00 237.00 99.00 50.50 8.71 9/16" UNF
8.00 35.35 35.35
M6X10
4.40 145
11/4" inch 1.38 1.26 7.48 5.51 1.91 2.19 3.35 3.90 1.73 9.33 3.90 1.99 0.34 0.31 1.39 1.39 9.70 170
DN40 mm 41.00 38.00 200.00 150.00 56.30 103.00 46.00 237.00 109.00 50.50 8.71 9/16" UNF
8.00 35.35 35.35
M6X10
5.70 168
11/2" inch 1.61 1.50 7.87 5.91 2.22 4.06 1.73 9.33 4.29 1.99 0.34 0.31 1.39 1.39 12.60 196

15. 8
17
18
3
1
5
2
19
7
4
9
2
2
2
6
5
7a
6
14
15
13
12
10
16
11
15
TuBore™ valves
TuBore™ valves
Components & materials
Size 1
⁄2”- 11
⁄2” | DN15-DN40 | 48X / 48(1)
Series
Item
Description Material specification Qty.
11 Disc spring A693 631 17-7PH 2
12 Stem nut DIN 3506 A4-80, A194 Gr 8M 1
13 Locking clip A164 8, 8A 1
14 Handle S.St. A240 430 1
15 Serrated washer A194 6 1
16 Handle nut DIN 3506 A4-80, A194 Gr 8M 1
17 Sleeve PVC 1
18 Body bolt EN 3506-1 A4-80, A193 Gr B8M 4
19 Body nut DIN 3506 A4-80, A194 Gr 8M 4
20 Anti static spring A313 302 1
21 Anti static plunger A479 304 1
23 Tag (not shown) A167 304 1
21 Anti static plunger A479 304 1
23 Tag (not shown) A167 304 1
* Repair kit components
** Only with HermetiX™ stem seal
Item
Description Material specification Qty.
1
Body A479 316L, EN 10222-5 1.4435, Alloy
C22 B574 N06022, Alloy C276 B574
N10276
1
2
Ends A479 316L, EN 10222-5 1.4435, Alloy
C22 B574 N06022, Alloy C276 B574
N10276
2
3 Ball A351 CF3M, A479 316L, B574 N06022,
B574 N10276 1
4 Stem A479 316L, A564 Gr.630 H1150D
17-4PH, B574 N06022, B574 N10276 1
5* Seat TFM, Virgin PEEK 2
6* Body seal PTFE 2
7* Stem thrust seal Virgin PEEK, TFM(2)
1
7a** Anti-abrasion ring Virgin PEEK, TFM(2)
1
8 Stop pin A582 303 1
9* Stem seal TFM 1
10 Follower B783 316L 1
(1)
48 Series is Habonim's standard valve design without the HermetiX™
stem seal construction.
(2)
This material cannot be used as part of the 48X design.

16. TxL thread
ø W F2
F1
S
H
K
OD
B
A-ETD
ID
A-TCD
R
D
C
Preparation
for actuation
DD
P
Stem grooves
show valve
ball position
Square
N thread N thread
Q M M
M
16
Floating Ball Valves
TuBore™ valves
Valve dimensions
Size 2”- 4” | DN50-DN100 | 48X / 48(1)
Series
TuBore™ valves General
ASME BPE
standard
DIN 11850
standard
ISO 1127
standard
Ordering code
system
TuBore™
size Unit OD ID A ETO A TC B C D H K S W R TC M N P F TxL
Weight
kg/lb
Kv
Cv
DN15 mm 12.70 9.40 137.00 89.00 20.60 29.00 38.00 61.60 41.50 150.00 31.80 25.20 5.54 3/8"
UNF
6.50 (F03) 36.00
M5X10
0.90 8
1/2" inch 0.50 0.37 5.39 3.50 0.81 1.14 1.50 2.42 1.63 5.91 1.25 0.99 0.22 0.26 1.42 2.00 9
DN20 mm 19.05 15.75 147.00 102.00 24.60 36.00 45.00 67.90 43.90 150.00 38.10 25.20 5.54 3/8"
UNF
7.10 (F03) 36.00
M5X10
1.00 29
3/4" inch 0.75 0.62 5.79 4.00 0.97 1.42 1.77 2.67 1.73 5.91 1.50 0.99 0.22 0.28 1.42 2.10 34
DN25 mm 25.40 22.10 168.00 118.00 35.50 43.50 61.00 84.80 43.90 187.00 44.50 50.40 7.54 7/8"
UNF
9.20 (F04) 42.00
M5X10
1.70 53
1" inch 1.00 0.87 6.61 4.65 1.40 1.71 2.41 3.34 1.73 7.36 1.75 1.98 0.30 0.36 1.65 3.80 62
DN40 mm 38.10 34.80 186.00 141.00 50.00 55.50 85.00 107.10 44.00 236.00 57.20 50.40 8.71 9/16"
UNF
13.00 (F05) 50.00
M6X12
3.50 150
11/2" inch 1.50 1.37 7.31 5.57 1.97 2.19 3.35 4.22 1.73 9.29 2.25 1.98 0.34 0.51 1.97 7.70 175

17. 8
17
18
3
1
5
6
2
18
14A
14
13
12
10
16
7
4
9
2
2
2
6
5
7a
14B
6A
17
TuBore™ valves
TuBore™ valves
Components & materials
Size 2”- 4” | DN50-DN100 | 48X / 48(1)
Series
Item
Description Material specification Qty.
10 Follower B783 316L 1
10A* Slide bearing TF316 1
11 Disc spring A693 631 17-7PH 2
12 Stem nut DIN 3506 A4-80, A194 Gr 8M 1
13 Tab lock washer A240 304 1
14 Handle S.St. A240 316/316L 1
14A Stop plate A240 430 1
14B Wrench head A351 CF8M 1
16 Wrench bolt A194 B8, DIN 3506 A2-70 1
17 Sleeve PVC 1
18 Body bolt EN 3506-1 A4-80, A193 Gr B8M 4-8-12
20 Anti static spring A313 302 1
21 Anti static plunger A479 304 1
23 Tag (not shown) A167 304 1
* Repair kit components
** Only with HermetiX™ stem seal
Item
Description Material specification Qty.
1
Body A479 316L, EN 10222-5 1.4435, Alloy
C22 B574 N06022, Alloy C276 B574
N10276
1
2
Ends A479 316L, EN 10222-5 1.4435, Alloy
C22 B574 N06022, Alloy C276 B574
N10276
2
3 Ball A351 CF3M, A479 316L, B574 N06022,
B574 N10276 1
4 Stem A479 316L, A564 Gr.630 H1150D
17-4PH, B574 N06022, B574 N10276 1
5* Seat TFM, Virgin PEEK 2
6* Body seal PTFE 2
6A Support ring A479 316L, B574 N06022 1
7* Stem thrust seal Virgin PEEK, TFM(2)
1
7a** Anti-abrasion ring Virgin PEEK, TFM(2)
1
8 Stop pin A582 303 1
9* Stem seal TFM 1
(1)
48 Series is Habonim's standard valve design without the HermetiX™
stem seal construction.
(2)
This material cannot be used as part of the 48X or 48G design.

18. S
H
D
C
L
OD
B
A-ETD
ID
A-TCD
R
TxL thread
F PCD
ø W
Preparation
for actuation
M
N thread
P
P
Stem flats
show valve
ball position
½”, ¾"
without nut
1" - 1½”
with nut
18
Floating Ball Valves
TuBore™ valves
Valve dimensions
Size 1
⁄2”- 11
⁄2” | DN15-DN40 | 48G Series
TuBore™ valves General
ASME BPE
standard
DIN 11850
standard
ISO 1127
standard
Ordering code
system
TuBore™
size Unit OD ID A ETO A TC B C D H K S W R TC M N P F TxL
Weight
kg/lb
Kv
Cv
DN15 mm 12.70 9.40 137.00 89.00 20.60 29.00 38.00 61.60 41.50 150.00 31.80 25.20 5.54 3/8"
UNF
6.50 (F03) 36.00
M5X10
0.90 8
1/2" inch 0.50 0.37 5.39 3.50 0.81 1.14 1.50 2.42 1.63 5.91 1.25 0.99 0.22 0.26 1.42 2.00 9
DN20 mm 19.05 15.75 147.00 102.00 24.60 36.00 45.00 67.90 44.00 150.00 38.10 25.20 5.54 3/8"
UNF
7.10 (F03) 36.00
M5X10
1.00 29
3/4" inch 0.75 0.62 5.79 4.00 0.97 1.42 1.77 2.67 1.73 5.91 1.50 0.99 0.22 0.28 1.42 2.10 34
DN25 mm 25.40 22.10 168.00 118.00 35.50 43.50 61.00 84.80 44.00 187.00 44.50 50.40 7.54 7/8"
UNF
9.20 (F04) 42.00
M5X10
1.70 53
1" inch 1.00 0.87 6.61 4.65 1.40 1.71 2.41 3.34 1.73 7.36 1.75 1.98 0.30 0.36 1.65 3.80 62
DN40 mm 38.10 34.80 186.00 141.00 50.00 55.50 85.00 107.10 44.00 236.00 57.20 50.40 8.71 9/16"
UNF
13.00 (F05) 50.00
M6X12
3.50 150
11/2" inch 1.50 1.37 7.31 5.57 1.97 2.19 3.35 4.22 1.73 9.29 2.25 1.98 0.34 0.51 1.97 7.70 175

19. 8
17
18
3
1
5
6A
2
18
14
15
13
12
10
16
7
4
9
11
2
2
2
6
5
7a
10A
6
6A
19
TuBore™ valves
TuBore™ valves
Components & materials
Size 1
⁄2”- 11
⁄2” | DN15-DN40 | 48G Series
Item
Description Material specification Qty.
10 Follower B783 316L 1
10A* Slide bearing TF316 1
11 Disc spring A693 631 17-7PH 2
12 Stem nut DIN 3506 A4-80, A194 Gr 8M 1
13 Locking clip A164 8, 8A 1
14 Handle S.St. A240 430 1
15 Serrated washer A194 6 1
16 Handle nut DIN 3506 A4-80, A194 Gr 8M 1
17 Sleeve PVC 1
18 Body bolt EN 3506-1 A4-80, A193 Gr B8M 4
19 Body nut DIN 3506 A4-80, A194 Gr 8M 4
20 Anti static spring A313 302 1
21 Anti static plunger A479 304 1
23 Tag (not shown) A167 304 1
* Repair kit components
Item
Description Material specification Qty.
1
Body A479 316L, EN 10222-5 1.4435, Alloy
C22 B574 N06022, Alloy C276 B574
N10276
1
2
Ends A479 316L, EN 10222-5 1.4435, Alloy
C22 B574 N06022, Alloy C276 B574
N10276
2
3 Ball A351 CF3M, A479 316L, B574 N06022,
B574 N10276
1
4 Stem A479 316L, A564 Gr.630 H1150D
17-4PH, B574 N06022, B574 N10276
1
5* Seat TFM, Virgin PEEK 2
6* Body inner seal PTFE 2
6B* Body outer seal Graphite 2
7* Stem thrust seal Virgin PEEK 1
7a* Anti-abrasion ring Virgin PEEK 1
8 Stop pin A582 303 1
9* Stem seal TFM 1

20. TxL thread
F PCD
ø W
S
H
D
C
OD
B
A-ETD
ID
A-TCD
R
L
Preparation
for actuation
DD
P
Stem grooves
show valve
ball position
Square
N thread N thread
Q M M
M
20
Floating Ball Valves
TuBore™ valves
Valve dimensions
Size 2”- 4” | DN50-DN100 | 48G Series
TuBore™ valves General
ASME BPE
standard
DIN 11850
standard
ISO 1127
standard
Ordering code
system
TuBore™
size Unit OD ID A ETO A TC B C D H K S W R TC M M-DD N P F1 F1 TxL
Weight
kg/lb
Kv
Cv
DN50 mm 53.00 50.00 100.00 90.00 72.70 70.00 112.10 129.30 45.00 401.00 139.00 64.00 - 13.90
M20
49.50 49.50
M8X10
12 385
2" inch 2.09 1.97 3.94 3.54 2.86 2.76 4.41 5.09 1.77 15.79 5.47 2.52 - 0.55 0.00 1.95 1.95 25 450
DN65 mm 70.00 66.00 110.00 95.00 83.40 98.30 144.90 169.20 57.20 401.00 164.00 91.00 18.90 15.90 1" -14
UNS-2A
16.70 50.00100.00
M10X14
19 581
21/2" inch 2.76 2.60 4.33 3.74 3.28 3.87 5.70 6.66 2.25 15.79 6.46 3.58 0.74 0.63 0.66 1.97 3.94 41 680
DN80 mm 85.00 81.00 120.00 110.00 112.00 105.50 152.20 184.50 70.00 401.00 199.00 106.00 18.90 15.90 1" -14
UNS-2A
16.70 70.00120.00
M10X16
30 1060
3" inch 3.35 3.19 4.72 4.33 4.41 4.15 5.99 7.26 2.75 15.79 7.83 4.17 0.74 0.63 0.66 2.76 4.72 66 1240
DN100 mm 104.00 100.00 180.00 130.00 123.00 179.00 248.50 193.50 61.00 401.00 224.00 119.00 18.90 15.90 1" -14
UNS-2A
16.70 80.00140.00
M10X16
40 1402
4" inch 4.09 3.94 7.09 5.12 4.84 7.05 9.78 7.62 2.40 15.79 8.82 4.69 0.74 0.63 0.66 3.15 5.51 88 1640

21. 8
17
18
3
1
5
6
2
18
14A
14
13
12
10
16
7
4
9
2
2
2
6
5
7a
14B
6A
10A
6A
6B
21
TuBore™ valves
TuBore™ valves
Components & materials
Size 2”- 4” | DN50-DN100 | 48G Series
Item
Description Material specification Qty.
10 Follower B783 316L 1
10A* Slide bearing TF316 1
11 Disc spring A693 631 17-7PH 2
12 Stem nut DIN 3506 A4-80, A194 Gr 8M 1
13 Tab lock washer A240 304 1
14 Handle S.St. A240 316/316L 1
14A Stop plate A240 430 1
14B Wrench head A351 CF8M 1
16 Wrench bolt A194 B8, DIN 3506 A2-70 1
17 Sleeve PVC 1
18 Body bolt EN 3506-1 A4-80, A193 Gr B8M 4-8-12
20 Anti static spring A313 302 1
21 Anti static plunger A479 304 1
23 Tag (not shown) A167 304 1
* Repair kit components
Item
Description Material specification Qty.
1
Body A479 316L, EN 10222-5 1.4435, Alloy
C22 B574 N06022, Alloy C276 B574
N10276
1
2
Ends A479 316L, EN 10222-5 1.4435, Alloy
C22 B574 N06022, Alloy C276 B574
N10276
2
3 Ball A351 CF3M, A479 316L, B574 N06022,
B574 N10276 1
4 Stem A479 316L, A564 Gr.630 H1150D
17-4PH, B574 N06022, B574 N10276 1
5* Seat TFM, Virgin PEEK 2
6* Body inner seal PTFE 2
6A Support ring A479 316L, B574 N06022 1
6B* Body outer seal Graphite 2
7* Stem thrust seal Virgin PEEK 1
7a* Anti-abrasion ring Virgin PEEK 1
8 Stop pin A582 303 1
9* Stem seal TFM 1

22. S
H
D
C
K
OD
B
A-ETD
ID
A-TCD
R
TxL thread
F PCD
ø W F2
F1
Preparation
for actuation
M
N thread
P
P
Stem flats
show valve
ball position
½”, ¾"
without nut
1" - 1½”
with nut
22
Floating Ball Valves
TuBore™ valves
Valve dimensions
TuBore™ valves General
ASME BPE
standard
DIN 11850
standard
ISO 1127
standard
Ordering code
system
Size 1
⁄2”- 2” | DN15-DN50 | 48X Series
TuBore™
size Unit OD ID A ETO A TC B C D H K S W R TC M N P F1 F2 TxL
Weight
kg/lb
Kv
Cv
DN10 mm 13.00 10.00 100.00 90.00 20.60 29.00 38.00 46.30 41.50 115.00 69.00 34.00 5.54 3/8" UNF
7.20 - 32.00
M5X6
1.00 9
3/8" inch 0.51 0.39 3.94 3.54 0.81 1.14 1.50 1.82 1.63 4.53 2.72 1.34 0.22 0.28 - 1.26 2.20 10
DN15 mm 19.00 16.00 110.00 95.00 24.60 36.00 45.00 49.40 44.00 115.00 69.00 34.00 5.54 3/8" UNF
7.20 15.00 32.00
M5X6
1.30 30
1/2" inch 0.75 0.63 4.33 3.74 0.97 1.42 1.77 1.94 1.73 4.53 2.72 1.34 0.22 0.28 0.59 1.26 2.85 35
DN20 mm 23.00 20.00 120.00 110.00 31.70 36.00 45.00 61.00 44.00 146.00 79.00 34.00 7.54 7/8" UNF
7.20 20.00 36.00
M5X8
2.20 48
3/4" inch 0.91 0.79 4.72 4.33 1.25 1.42 1.77 2.40 1.73 5.75 3.11 1.34 0.30 0.28 0.79 1.42 4.85 56
DN25 mm 29.00 26.00 180.00 130.00 41.30 43.50 61.00 85.00 44.00 187.00 94.00 50.50 7.54 7/8" UNF
7.20 29.70 29.70
M5X8
2.80 98
1" inch 1.14 1.02 7.09 5.12 1.63 1.71 2.41 3.35 1.73 7.36 3.70 1.99 0.30 0.28 1.17 1.17 6.20 114
DN32 mm 35.00 32.00 190.00 140.00 48.40 55.50 85.00 99.00 46.00 237.00 99.00 50.50 8.71 9/16" UNF
8.00 35.35 35.35
M6X10
4.40 145
11/4" inch 1.38 1.26 7.48 5.51 1.91 2.19 3.35 3.90 1.73 9.33 3.90 1.99 0.34 0.31 1.39 1.39 9.70 170
DN40 mm 41.00 38.00 200.00 150.00 56.30 103.00 46.00 237.00 109.00 50.50 8.71 9/16" UNF
8.00 35.35 35.35
M6X10
5.70 168
11/2" inch 1.61 1.50 7.87 5.91 2.22 4.06 1.73 9.33 4.29 1.99 0.34 0.31 1.39 1.39 12.60 196

23. 8
17
18
3
1
5
2
19
7
4
9
2
2
2
6
5
7a
6
14
15
13
12
10
16
11
23
TuBore™ valves
TuBore™ valves
Components & materials
Size 1
⁄2”- 2” | DN15-DN50 | 48X Series
Item
Description Material specification Qty.
11 Disc spring A693 631 17-7PH 2
12 Stem nut DIN 3506 A4-80, A194 Gr 8M 1
13 Locking clip A164 8, 8A 1
14 Handle S.St. A240 430 1
15 Serrated washer A194 6 1
16 Handle nut DIN 3506 A4-80, A194 Gr 8M 1
17 Sleeve PVC 1
18 Body bolt EN 3506-1 A4-80, A193 Gr B8M 4
19 Body nut DIN 3506 A4-80, A194 Gr 8M 4
20 Anti static spring A313 302 1
21 Anti static plunger A479 304 1
23 Tag (not shown) A167 304 1
21 Anti static plunger A479 304 1
23 Tag (not shown) A167 304 1
* Repair kit components
** Only with HermetiX™ stem seal
Item
Description Material specification Qty.
1
Body A479 316L, EN 10222-5 1.4435, Alloy
C22 B574 N06022, Alloy C276 B574
N10276
1
2
Ends A479 316L, EN 10222-5 1.4435, Alloy
C22 B574 N06022, Alloy C276 B574
N10276
2
3 Ball A351 CF3M, A479 316L, B574 N06022,
B574 N10276 1
4 Stem A479 316L, A564 Gr.630 H1150D
17-4PH, B574 N06022, B574 N10276 1
5* Seat TFM, Virgin PEEK 2
6* Body seal PTFE 2
7* Stem thrust seal Virgin PEEK, TFM(2)
1
7a** Anti-abrasion ring Virgin PEEK, TFM(2)
1
8 Stop pin A582 303 1
9* Stem seal TFM 1
10 Follower B783 316L 1
(1)
48 Series is Habonim's standard valve design without the HermetiX™
stem seal construction.
(2)
This material cannot be used as part of the 48X or 48G design.

24. TxL thread
ø W F2
F1
S
H
K
OD
B
A-ETD
ID
A-TCD
R
D
C
Preparation
for actuation
DD
P
Stem grooves
show valve
ball position
Square
N thread N thread
Q M M
M
24
Floating Ball Valves
TuBore™ valves
Valve dimensions
Size 2”- 4” | DN50-DN100 | 48X Series
TuBore™ valves General
ASME BPE
standard
DIN 11850
standard
ISO 1127
standard
Ordering code
system
TuBore™
size Unit OD ID A ETO A TC B C D H K S W R TC M M-DD N P F1 F1 TxL
Weight
kg/lb
Kv
Cv
DN50 mm 53.00 50.00 100.00 90.00 72.70 70.00 112.10 129.30 45.00 401.00 139.00 64.00 - 13.90 9/16"
UNF
49.50 49.50
M8X10
12 385
2" inch 2.09 1.97 3.94 3.54 2.86 2.76 4.41 5.09 1.77 15.79 5.47 2.52 - 0.55 0.00 1.95 1.95 25 450
DN65 mm 70.00 66.00 110.00 95.00 83.40 98.30 144.90 169.20 57.20 401.00 164.00 91.00 18.90 15.90 1" -14
UNS-2A
16.70 50.00100.00
M10X14
19 581
21/2" inch 2.76 2.60 4.33 3.74 3.28 3.87 5.70 6.66 2.25 15.79 6.46 3.58 0.74 0.63 0.66 1.97 3.94 41 680
DN80 mm 85.00 81.00 120.00 110.00 112.00 105.50 152.20 184.50 70.00 401.00 199.00 106.00 18.90 15.90 1" -14
UNS-2A
16.70 70.00120.00
M10X16
30 1060
3" inch 3.35 3.19 4.72 4.33 4.41 4.15 5.99 7.26 2.75 15.79 7.83 4.17 0.74 0.63 0.66 2.76 4.72 66 1240
DN100 mm 104.00 100.00 180.00 130.00 123.00 179.00 248.50 193.50 61.00 401.00 224.00 119.00 18.90 15.90 1" -14
UNS-2A
16.70 80.00140.00
M10X16
40 1402
4" inch 4.09 3.94 7.09 5.12 4.84 7.05 9.78 7.62 2.40 15.79 8.82 4.69 0.74 0.63 0.66 3.15 5.51 88 1640

25. 8
17
18
3
1
5
6
2
18
14A
14
13
12
10
16
7
4
9
2
2
2
6
5
7a
14B
6A
25
TuBore™ valves
TuBore™ valves
Components & materials
Size 2”- 4” | DN50-DN100 | 48X Series
Item
Description Material specification Qty.
10 Follower B783 316L 1
10A* Slide bearing TF316 1
11 Disc spring A693 631 17-7PH 2
12 Stem nut DIN 3506 A4-80, A194 Gr 8M 1
13 Tab lock washer A240 304 1
14 Handle S.St. A240 316/316L 1
14A Stop plate A240 430 1
14B Wrench head A351 CF8M 1
16 Wrench bolt A194 B8, DIN 3506 A2-70 1
17 Sleeve PVC 1
18 Body bolt EN 3506-1 A4-80, A193 Gr B8M 4-8-12
20 Anti static spring A313 302 1
21 Anti static plunger A479 304 1
23 Tag (not shown) A167 304 1
* Repair kit components
** Only with HermetiX™ stem seal
Item
Description Material specification Qty.
1
Body A479 316L, EN 10222-5 1.4435, Alloy
C22 B574 N06022, Alloy C276 B574
N10276
1
2
Ends A479 316L, EN 10222-5 1.4435, Alloy
C22 B574 N06022, Alloy C276 B574
N10276
2
3 Ball A351 CF3M, A479 316L, B574 N06022,
B574 N10276 1
4 Stem A479 316L, A564 Gr.630 H1150D
17-4PH, B574 N06022, B574 N10276 1
5* Seat TFM, Virgin PEEK 2
6* Body seal PTFE 2
6A Support ring A479 316L, B574 N06022 1
7* Stem thrust seal Virgin PEEK, TFM(2)
1
7a** Anti-abrasion ring Virgin PEEK, TFM(2)
1
8 Stop pin A582 303 1
9* Stem seal TFM 1
(1)
48 Series is Habonim's standard valve design without the HermetiX™
stem seal construction.
(2)
This material cannot be used as part of the 48X or 48G design.

26. S
H
D
C
L
OD
B
A-ETD
ID
A-TCD
R
TxL thread
F PCD
ø W
Preparation
for actuation
M
N thread
P
P
Stem flats
show valve
ball position
½”, ¾"
without nut
1" - 1½”
with nut
26
Floating Ball Valves
TuBore™ valves
Valve dimensions
Size 1
⁄2”- 2” | DN15-DN50 | 48G Series
TuBore™ valves General
ASME BPE
standard
DIN 11850
standard
ISO 1127
standard
Ordering code
system
TuBore™
size Unit OD ID A ETO A TC B C D H K S W R TC M N P F1 F2 TxL
Weight
kg/lb
Kv
Cv
DN10 mm 13.00 10.00 100.00 90.00 20.60 29.00 38.00 46.30 41.50 115.00 69.00 34.00 5.54 3/8" UNF
7.20 - 32.00
M5X6
1.00 9
3/8" inch 0.51 0.39 3.94 3.54 0.81 1.14 1.50 1.82 1.63 4.53 2.72 1.34 0.22 0.28 - 1.26 2.20 10
DN15 mm 19.00 16.00 110.00 95.00 24.60 36.00 45.00 49.40 44.00 115.00 69.00 34.00 5.54 3/8" UNF
7.20 15.00 32.00
M5X6
1.30 30
1/2" inch 0.75 0.63 4.33 3.74 0.97 1.42 1.77 1.94 1.73 4.53 2.72 1.34 0.22 0.28 0.59 1.26 2.85 35
DN20 mm 23.00 20.00 120.00 110.00 31.70 36.00 45.00 61.00 44.00 146.00 79.00 34.00 7.54 7/8" UNF
7.20 20.00 36.00
M5X8
2.20 48
3/4" inch 0.91 0.79 4.72 4.33 1.25 1.42 1.77 2.40 1.73 5.75 3.11 1.34 0.30 0.28 0.79 1.42 4.85 56
DN25 mm 29.00 26.00 180.00 130.00 41.30 43.50 61.00 85.00 44.00 187.00 94.00 50.50 7.54 7/8" UNF
7.20 29.70 29.70
M5X8
2.80 98
1" inch 1.14 1.02 7.09 5.12 1.63 1.71 2.41 3.35 1.73 7.36 3.70 1.99 0.30 0.28 1.17 1.17 6.20 114
DN32 mm 35.00 32.00 190.00 140.00 48.40 55.50 85.00 99.00 46.00 237.00 99.00 50.50 8.71 9/16" UNF
8.00 35.35 35.35
M6X10
4.40 145
11/4" inch 1.38 1.26 7.48 5.51 1.91 2.19 3.35 3.90 1.73 9.33 3.90 1.99 0.34 0.31 1.39 1.39 9.70 170
DN40 mm 41.00 38.00 200.00 150.00 56.30 103.00 46.00 237.00 109.00 50.50 8.71 9/16" UNF
8.00 35.35 35.35
M6X10
5.70 168
11/2" inch 1.61 1.50 7.87 5.91 2.22 4.06 1.73 9.33 4.29 1.99 0.34 0.31 1.39 1.39 12.60 196

27. 8
17
18
3
1
5
6
2
18
14
15
13
12
10
16
7
4
9
11
2
2
2
6
5
7a
10A
6B
6B
27
TuBore™ valves
TuBore™ valves
Components & materials
Size 1
⁄2”- 2” | DN15-DN50 | 48G Series
Item Description Material specification Qty.
10 Follower B783 316L 1
10A* Slide bearing TF316 1
11 Disc spring A693 631 17-7PH 2
12 Stem nut DIN 3506 A4-80, A194 Gr 8M 1
13 Locking clip A164 8, 8A 1
14 Handle S.St. A240 430 1
15 Serrated washer A194 6 1
16 Handle nut DIN 3506 A4-80, A194 Gr 8M 1
17 Sleeve PVC 1
18 Body bolt EN 3506-1 A4-80, A193 Gr B8M 4
19 Body nut DIN 3506 A4-80, A194 Gr 8M 4
20 Anti static spring A313 302 1
21 Anti static plunger A479 304 1
23 Tag (not shown) A167 304 1
* Repair kit components
Item Description Material specification Qty.
1
Body A479 316L, EN 10222-5 1.4435, Alloy
C22 B574 N06022, Alloy C276 B574
N10276
1
2
Ends A479 316L, EN 10222-5 1.4435, Alloy
C22 B574 N06022, Alloy C276 B574
N10276
2
3 Ball A351 CF3M, A479 316L, B574 N06022,
B574 N10276 1
4 Stem A479 316L, A564 Gr.630 H1150D
17-4PH, B574 N06022, B574 N10276 1
5* Seat TFM, Virgin PEEK 2
6* Body inner seal PTFE 2
6B* Body outer seal Graphite 2
7* Stem thrust seal Virgin PEEK 1
7a* Anti-abrasion ring Virgin PEEK 1
8 Stop pin A582 303 1
9* Stem seal TFM 1

28. TxL thread
F PCD
ø W
S
H
D
C
OD
B
A-ETD
ID
A-TCD
R
L
Preparation
for actuation
DD
P
Stem grooves
show valve
ball position
Square
N thread N thread
Q M M
M
28
Floating Ball Valves
TuBore™ valves
Valve dimensions
Size 2”- 4” | DN50-DN100 | 48G Series
TuBore™ valves General
ASME BPE
standard
DIN 11850
standard
ISO 1127
standard
Ordering code
system
TuBore™
size Unit OD ID A ETO A TC B C D H K S W R TC M M-DD N P F1 F1 TxL
Weight
kg/lb
Kv
Cv
DN50 mm 53.00 50.00 100.00 90.00 72.70 70.00 112.10 129.30 45.00 401.00 139.00 64.00 - 13.90 9/16"
UNF
49.50 49.50
M8X10
12 385
2" inch 2.09 1.97 3.94 3.54 2.86 2.76 4.41 5.09 1.77 15.79 5.47 2.52 - 0.55 0.00 1.95 1.95 25 450
DN65 mm 70.00 66.00 110.00 95.00 83.40 98.30 144.90 169.20 57.20 401.00 164.00 91.00 18.90 15.90 1" -14
UNS-2A
16.70 50.00100.00
M10X14
19 581
21/2" inch 2.76 2.60 4.33 3.74 3.28 3.87 5.70 6.66 2.25 15.79 6.46 3.58 0.74 0.63 0.66 1.97 3.94 41 680
DN80 mm 85.00 81.00 120.00 110.00 112.00 105.50 152.20 184.50 70.00 401.00 199.00 106.00 18.90 15.90 1" -14
UNS-2A
16.70 70.00120.00
M10X16
30 1060
3" inch 3.35 3.19 4.72 4.33 4.41 4.15 5.99 7.26 2.75 15.79 7.83 4.17 0.74 0.63 0.66 2.76 4.72 66 1240
DN100 mm 104.00 100.00 180.00 130.00 123.00 179.00 248.50 193.50 61.00 401.00 224.00 119.00 18.90 15.90 1" -14
UNS-2A
16.70 80.00140.00
M10X16
40 1402
4" inch 4.09 3.94 7.09 5.12 4.84 7.05 9.78 7.62 2.40 15.79 8.82 4.69 0.74 0.63 0.66 3.15 5.51 88 1640

29. 8
17
18
3
1
5
6
2
18
14A
14
13
12
10
16
7
4
9
2
2
2
6
5
10A
14B
6A
7a
6B
6B
29
TuBore™ valves
TuBore™ valves
Components & materials
Size 2”- 4” | DN50-DN100 | 48G Series
Item Description Material specification Qty.
9* Stem seal TFM 1
10 Follower B783 316L 1
10A* Slide bearing TF316 1
11 Disc spring A693 631 17-7PH 2
12 Stem nut DIN 3506 A4-80, A194 Gr 8M 1
13 Tab lock washer A240 304 1
14 Handle S.St. A240 316/316L 1
14A Stop plate A240 430 1
14B Wrench head A351 CF8M 1
16 Wrench bolt A194 B8, DIN 3506 A2-70 1
17 Sleeve PVC 1
18 Body bolt EN 3506-1 A4-80, A193 Gr B8M 4-8-12
20 Anti static spring A313 302 1
21 Anti static plunger A479 304 1
23 Tag (not shown) A167 304 1
* Repair kit components
Item Description Material specification Qty.
1
Body A479 316L, EN 10222-5 1.4435, Alloy
C22 B574 N06022, Alloy C276 B574
N10276
1
2
Ends A479 316L, EN 10222-5 1.4435, Alloy
C22 B574 N06022, Alloy C276 B574
N10276
2
3 Ball A351 CF3M, A479 316L, B574 N06022,
B574 N10276 1
4 Stem A479 316L, A564 Gr.630 H1150D
17-4PH, B574 N06022, B574 N10276 1
5* Seat TFM, Virgin PEEK 2
6* Body inner seal PTFE 2
6A Support ring A479 316L, B574 N06022 1
6B* Body outer seal Graphite 2
7* Stem thrust seal Virgin PEEK 1
7a* Anti-abrasion ring Virgin PEEK 1
8 Stop pin A582 303 1

30. TuBore™ valves General
ASME BPE
standard
DIN 11850
standard
ISO 1127
standard
Ordering code
system
30
Floating Ball Valves
TuBore™ valves
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 . . 30
2 0 F 4 8 G - 6 6 6 6 A T / E T O - E 3 2
Size Features Series Design Body / Ends Ball / Stem Seat Seal End connections Special features
Size
Code inch mm
02 1/4” 8
03 3/8” 10
05 1/2” 15
07 3/4” 20
10 1” 25
12 11/4” 32
15 11/2” 40
20 2” 50
25 21/2” 65
30 3” 80
40 4” 100
60 6” 150
Series
48 3 piece TuBore™
Design
Basic design
X HermetiX™ stem seal
W
HermetiX™ graphite-free fire
safe stem seal
G
HermetiX™ graphite-free fire
safe stem seal, FDA compliant
wetted parts
Body / Ends
3 S. St. EN10222-5 1.4435 Forged
6 S. St. A351 CF3M/ A479 316L
P S. St. A182 316L Forged
C Alloy-C276 A494 CW-12MW
W Alloy-C22 A494 CX-2MW
Ball / Stem
6 S. Steel A479 316L
M 17-4PH A564 Gr 630 H1150D
C Alloy-C276 B574 N10276
W Alloy-C22 B574 N06022
Seat
A TFM
L Virgin PEEK
Seal
T PTFE
G Expended Graphite
I Impregnated Graphite
End connections
Welded
BWO Buttweld tube ASME BPE
ETO Extended tube ASME BPE
BWD Buttweld tube DIN 11850
ETD Extended tube DIN 11850
BWI Buttweld tube ISO 1127
ETI Extended tube ISO 1127
Clamp
TC Tri-clamp ASME BPE
TCD Tri-clamp DIN 32676
TCI Tri-clamp ISO 2852
In some applications the available options above are limited to specific sizes please consult with Habonim for details
Ordering code system
The HABONIM TuBore™ ball valve identification code
Special features
G.. Internal surface finish (G32)
E.. Electropolish (E24,E32)
B Valve made from rolled bar
J2N05 Jacketed valve - Number of ports
(2), type (NPT) and size (1/2")
WR DD stem
Valve special stem seals
HC High cycle service
ORV Viton O-ring based
ORB NBR O-ring based
ORE EPDM O-ring based
LAX FDA compliant HermetiX™
Features
F Fire safe
Q Cavity filler seats
D Diverter, Bottom entry
S Diverter, Side entry

31. 31
TuBore™ valves
TuBore™ valves

32. w w w . h a b o n i m . c o m
ISRAEL
Habonim Headquarter
Tel: +972-4-6914911 / 6914903
Fax: +972-4-6914935
sales_international@habonim.com
USA
Habonim USA
Toll Free Phone: 1-866-261-8400
Toll Free Fax: 1-866-243-9959
sales_usa@habonim.com
China
Habonim China
Tel: + 86 21 64453190 *146
Fax: + 86 21 64453191
sales_china@habonim.com
UK
Habonim UK
Tel: +44-1633-484554
Fax: +44-1633-482252
sales_uk@habonim.com
Australia
Habonim Australia
Tel: +61 3 9556 5428
sales_au@habonimau.com
www.habonim.com
TuBore™10/15