Parker manufactures one of the widest offerings of quick connect hose fittings available, with variants, options, and specialized products to suit almost every application.
Bls-series Double-Acting Climbing Jacks include integral tilt saddles with maximum tilt angles up to 5˚ and large base with anti-rotation rod for stability.
This document provides guidelines for selecting dampers, actuators, and valves for HVAC control applications. It includes sections on damper and actuator sizing, types of actuators, valve selection criteria, product specifications, wiring diagrams, accessories, and competitive cross references. Contact information is provided for technical support and ordering. Product information, literature, pricing and selection tools are available on Honeywell's customer website.
The document outlines requirements and procedures for liquid penetrant examination, including:
- Referencing other documents for details on techniques and definitions
- Requiring procedures to be written and include processing details
- Certification of contaminant content is needed for materials used on certain alloys to limit sulfur, chlorine, and fluorine
- Surface preparation, application of penetrant, removal of excess penetrant, developing, interpretation and cleaning are described
Stl cnx - weld - solutions to design of weldments - blodgettDurim Bajrami
This document provides guidance on permissible stresses for weld metal in various types of welds, including complete penetration groove welds, partial penetration groove welds, fillet welds, and plug and slot welds. It specifies the required strength levels for weld metal based on the type of stress it experiences. It also provides a table matching weld metal strength levels to common base metal grades. The document aims to help engineers properly design welded connections and ensure welds have sufficient strength.
Alternative Replacement Cross Reference for Vishayhvccapacitor
HVC Capacitor announces a range of custom high voltage ceramic disc and doorknob capacitors to replace various Vishay models from 1kV to 50kV. HVC claims to offer technical support for component selection, higher customization rates, shorter lead times from 3-8 weeks depending on model, and a global sales network for easier purchasing. The document provides a table cross-referencing over 100 Vishay part numbers with HVC replacement recommendations and contact information for additional details.
This document outlines requirements and procedures for liquid penetrant examination, which is used to detect surface-breaking discontinuities in nonporous metals. It specifies that procedures must be written and include details of materials, cleaning, penetrant application, developer application, and interpretation. Materials must be controlled for contaminants like sulfur, chlorine, and fluorine when examining nickel alloys, stainless steels, and titanium to prevent corrosion. Equipment, techniques, and documentation requirements are also defined.
Deutz fahr serie 1000 3 cylinders euro 2 engine service repair manualfjjsefkkertsemme
This document provides instructions for servicing and overhauling Deutz-Fahr 1000/3-4-6 cylinder engines. It includes sections on engine disassembly, component inspection and testing procedures, and engine reassembly. Detailed specifications and torque values are provided for each engine component. Updates to the manual will be provided to authorized service centers.
Bls-series Double-Acting Climbing Jacks include integral tilt saddles with maximum tilt angles up to 5˚ and large base with anti-rotation rod for stability.
This document provides guidelines for selecting dampers, actuators, and valves for HVAC control applications. It includes sections on damper and actuator sizing, types of actuators, valve selection criteria, product specifications, wiring diagrams, accessories, and competitive cross references. Contact information is provided for technical support and ordering. Product information, literature, pricing and selection tools are available on Honeywell's customer website.
The document outlines requirements and procedures for liquid penetrant examination, including:
- Referencing other documents for details on techniques and definitions
- Requiring procedures to be written and include processing details
- Certification of contaminant content is needed for materials used on certain alloys to limit sulfur, chlorine, and fluorine
- Surface preparation, application of penetrant, removal of excess penetrant, developing, interpretation and cleaning are described
Stl cnx - weld - solutions to design of weldments - blodgettDurim Bajrami
This document provides guidance on permissible stresses for weld metal in various types of welds, including complete penetration groove welds, partial penetration groove welds, fillet welds, and plug and slot welds. It specifies the required strength levels for weld metal based on the type of stress it experiences. It also provides a table matching weld metal strength levels to common base metal grades. The document aims to help engineers properly design welded connections and ensure welds have sufficient strength.
Alternative Replacement Cross Reference for Vishayhvccapacitor
HVC Capacitor announces a range of custom high voltage ceramic disc and doorknob capacitors to replace various Vishay models from 1kV to 50kV. HVC claims to offer technical support for component selection, higher customization rates, shorter lead times from 3-8 weeks depending on model, and a global sales network for easier purchasing. The document provides a table cross-referencing over 100 Vishay part numbers with HVC replacement recommendations and contact information for additional details.
This document outlines requirements and procedures for liquid penetrant examination, which is used to detect surface-breaking discontinuities in nonporous metals. It specifies that procedures must be written and include details of materials, cleaning, penetrant application, developer application, and interpretation. Materials must be controlled for contaminants like sulfur, chlorine, and fluorine when examining nickel alloys, stainless steels, and titanium to prevent corrosion. Equipment, techniques, and documentation requirements are also defined.
Deutz fahr serie 1000 3 cylinders euro 2 engine service repair manualfjjsefkkertsemme
This document provides instructions for servicing and overhauling Deutz-Fahr 1000/3-4-6 cylinder engines. It includes sections on engine disassembly, component inspection and testing procedures, and engine reassembly. Detailed specifications and torque values are provided for each engine component. Updates to the manual will be provided to authorized service centers.
The document provides an overview of various flow control solutions from Pentair Valves & Controls, including valves, actuators, instrumentation and controls from numerous brands. It lists specific product lines for different valve types like ball valves, butterfly valves, check valves and more. Key details are provided on size ranges, pressure and temperature ratings, materials of construction and major markets served. The company aims to be a total solutions provider for flow control applications across many industries.
Apex Power Tools 2016 Gi 1250-eu-en0316 03Sean Ibrahim
The new catalogue GI-1250 shows the most important Industrial Power Tools of the brands Airetool, Apex, Dotco, Master Power, and Cleco. New Industrial Power Tools for Professionals.
The document provides an overview of industrial power tools from several brands, including Airetool, Apex, Dotco, Master Power, and Cleco. It describes various types of power tools such as tube rolling systems, tube expanders, sockets, drills, grinders, sanders, and assembly tools. The tools are intended for professional users and applications like manufacturing, maintenance, fastening, drilling, cutting, grinding, and finishing. Specifications and features are provided for each product line.
This catalog from U.S. Seal Mfg provides information for selecting replacement mechanical seals for pumps. It includes cross-reference tables to identify the correct U.S. Seal Mfg part number based on the pump manufacturer's part number. The catalog also details the various seal types and materials offered by U.S. Seal Mfg as well as installation instructions and troubleshooting guidance. Customers can use this catalog to find replacement seals for pumps from manufacturers in various industries such as water, petrochemical, food processing, and more.
The document is an expansion joint design guide from Metraflex that provides data on various expansion joint models for pipes. It includes specifications for the Metragator and compensator models, which are suitable for long axial movements and small diameter pipes respectively. The guide discusses bellows designs, applications, engineering data, and how to order Metraflex expansion joints. It aims to help users select the appropriate expansion joint for their piping system based on factors like pressure, temperature, movement needs, and pipe size.
The document provides information on tools for preparing electric utility distribution and transmission cables. It includes tools for stripping insulation from secondary distribution cables, mid-span stripping of overhead primary distribution cables, insulation stripping and jacket stripping for underground cables, removing insulation shields from underground and transmission cables, pencilling transmission cables, and other specialty distribution tools. Tables provide part numbers and specifications for various cable end strippers and other tools to prepare different cable types.
APP 1.5, APP 1.8, APP 2.2, APP 2.5, APP 3.0 and APP 3.5 pumps are designed to supply low viscosity and corrosive fluids under high pressure, e.g. in seawater reverse osmosis
filtration applications and for high-pressure saltwater pumping.
The pumps are based on the axial piston principle enabling a very light and compact design. The design ensures that lubrication of the moving parts in the pumps is provided by
the fluid itself. No oil lubrication is thus required
Read more at - http://www.danfoss.in/
Anderson Greenwood is a world class manufacturer of industrial pressure relief valves, providing protection from system overpressure in vessels, tanks, piping, and other closed systems.
With CrystalCalHP, you can do a 10 point up and down calibration in less than three minutes, including printing out a calibration certificate.
The CrystalCalHP includes our GaugeCalHP pressure comparator, FastCalXP calibration software, XP2i digital test gauges, and CPF high pressure fittings.
Learn more on http://www.crystalengineering.net/crystalcalhp
This document is a catalog for PANDUCT wiring duct products. It includes sections that describe different types of wiring ducts for control panel applications, special environments, voice and data communications applications, as well as tools and accessories. Each section provides an overview and details individual product lines with part numbers, specifications and installation guidance. The document contains technical information sections with dimensions, fill capacities, material specifications and color options.
This document provides an overview of Panduct wiring duct products including:
- Sections on new products, control panel wiring ducts, special environment wiring ducts, voice and data wiring ducts, tools and accessories.
- Details on specific wiring duct types, accessories, installation tools and technical specifications.
- Contact information for technical support and a table of contents for navigating the document sections.
The Variable Area flowmeter is an instrument for metering the flowrate of liquids and gases in a pipeline. It includes a vertically oriented conical tube, whose diameter is larg- er at the top than at the bottom, through which the fluid flows upward and in which a vertically moving float is positioned.
This document provides information on RIVNUT® brand blind rivet nuts, including:
- RIVNUT® is the original internally threaded blind rivet invented in 1936 for aircraft applications.
- It describes various RIVNUT® product lines that are designed for different materials and applications, including the Original, PLUSNUT®, RIVKLE®, TW, and HRT models.
- It provides specifications and dimensions for each product line as well as information on compatible tools and applications in industries like transportation, construction, and electronics.
Jetronics India, established as manufacturers of connectors in 1985, has grown into a leading producer and
exporter of MILC5015 grade electrical connectors and related accessories.
Trident Pneumatics is India's largest exporter of compressed air treatment products with over 200,000 installations. They produce automatic drain valves under their EDV-X series that reliably drain sludge and rust from condensate tanks. The valves have adjustable timers and indicators for power and drain status. Trident Pneumatics has sales and service outlets in major Indian cities and their automatic drain valves are suitable for applications like air receivers, drop legs, and air dryers.
PR Electronics Signal Conditioning & Communication Interfaces Product CatalogPower Specialties, Inc.
Offering a wide range of analog and digital devices covering over a thousand applications in industrial and factory automation: Temperature transmitters and sensors.; I.S. Interfaces; Communication Interfaces ; Multifunctional signal conditioning devices; Isolation.
EagleBurgmann_Catalog Mechanical seals- Magnetic couplings_EN_22.07.2015Can ?irin
This document provides an overview of various mechanical seals and related products from EagleBurgmann including: mechanical seals for pumps, agitators, compressors, split seals, gas-lubricated seals, dry-running seals, standard cartridge seals, elastomer bellows seals, and magnetic couplings. It also briefly describes EagleBurgmann as a leading manufacturer of industrial sealing solutions offering a wide portfolio of standard and custom seals for applications across many industries.
This document provides installation and operation instructions for a Vortex Flow Meter. It discusses general information about the product, technical specifications, model selection details, cautions for installation, electrical wiring, programming and setup, and troubleshooting. The key points are that the flow meter works based on the Karman vortex principle, requires a minimum of 10 diameters of straight pipe upstream and 5 diameters downstream to achieve accurate measurements, and the installation must ensure the pipes remain fully filled with liquid to avoid measurement errors.
The document summarizes a portable blast machine system that:
1. Is rated for 150 psi and holds 2 cubic feet of blast media.
2. Comes equipped with pneumatic remote controls and includes an Apollo 600 HP respirator.
3. Is a high-performance blast cleaning system that removes corrosion and coatings from surfaces using abrasive media.
NORMA MANUAL PARA DETERMINAR REMANENTE ASME B31G-2023.pdfgerencia52
This document is the 2023 revision of the ASME B31G standard for determining the remaining strength of corroded pipelines. It provides evaluation methods and tables of allowable lengths of corrosion for various pipe sizes. The standard was developed by the ASME B31 Committee on Pressure Piping and is intended as a supplement to the ASME B31 Code for Pressure Piping.
Flow & Pressure Instrumentation for Biopharmaceuticals & Life SciencesMiller Energy, Inc.
Producing biopharmaceuticals is one of the world’s most demanding manufacturing processes. Brooks Instrument’s mass flow and pressure control technology helps maximize cell culture yields and control bioprocess costs. Brooks flow and pressure controllers set global standards for reliability, repeatability and long-term stability.
One Series Safety Transmitter - Pressure and Temperature Transmitter-SwitchMiller Energy, Inc.
The One Series Safety Transmitter simplifies installation, improves productivity, and eliminates nuisance trips. Sensor diagnostics with redundant data processing detect open, shorted, and plugged sensing elements.
More Related Content
Similar to Quick Coupling Products Guide - Commercial & Industrial
The document provides an overview of various flow control solutions from Pentair Valves & Controls, including valves, actuators, instrumentation and controls from numerous brands. It lists specific product lines for different valve types like ball valves, butterfly valves, check valves and more. Key details are provided on size ranges, pressure and temperature ratings, materials of construction and major markets served. The company aims to be a total solutions provider for flow control applications across many industries.
Apex Power Tools 2016 Gi 1250-eu-en0316 03Sean Ibrahim
The new catalogue GI-1250 shows the most important Industrial Power Tools of the brands Airetool, Apex, Dotco, Master Power, and Cleco. New Industrial Power Tools for Professionals.
The document provides an overview of industrial power tools from several brands, including Airetool, Apex, Dotco, Master Power, and Cleco. It describes various types of power tools such as tube rolling systems, tube expanders, sockets, drills, grinders, sanders, and assembly tools. The tools are intended for professional users and applications like manufacturing, maintenance, fastening, drilling, cutting, grinding, and finishing. Specifications and features are provided for each product line.
This catalog from U.S. Seal Mfg provides information for selecting replacement mechanical seals for pumps. It includes cross-reference tables to identify the correct U.S. Seal Mfg part number based on the pump manufacturer's part number. The catalog also details the various seal types and materials offered by U.S. Seal Mfg as well as installation instructions and troubleshooting guidance. Customers can use this catalog to find replacement seals for pumps from manufacturers in various industries such as water, petrochemical, food processing, and more.
The document is an expansion joint design guide from Metraflex that provides data on various expansion joint models for pipes. It includes specifications for the Metragator and compensator models, which are suitable for long axial movements and small diameter pipes respectively. The guide discusses bellows designs, applications, engineering data, and how to order Metraflex expansion joints. It aims to help users select the appropriate expansion joint for their piping system based on factors like pressure, temperature, movement needs, and pipe size.
The document provides information on tools for preparing electric utility distribution and transmission cables. It includes tools for stripping insulation from secondary distribution cables, mid-span stripping of overhead primary distribution cables, insulation stripping and jacket stripping for underground cables, removing insulation shields from underground and transmission cables, pencilling transmission cables, and other specialty distribution tools. Tables provide part numbers and specifications for various cable end strippers and other tools to prepare different cable types.
APP 1.5, APP 1.8, APP 2.2, APP 2.5, APP 3.0 and APP 3.5 pumps are designed to supply low viscosity and corrosive fluids under high pressure, e.g. in seawater reverse osmosis
filtration applications and for high-pressure saltwater pumping.
The pumps are based on the axial piston principle enabling a very light and compact design. The design ensures that lubrication of the moving parts in the pumps is provided by
the fluid itself. No oil lubrication is thus required
Read more at - http://www.danfoss.in/
Anderson Greenwood is a world class manufacturer of industrial pressure relief valves, providing protection from system overpressure in vessels, tanks, piping, and other closed systems.
With CrystalCalHP, you can do a 10 point up and down calibration in less than three minutes, including printing out a calibration certificate.
The CrystalCalHP includes our GaugeCalHP pressure comparator, FastCalXP calibration software, XP2i digital test gauges, and CPF high pressure fittings.
Learn more on http://www.crystalengineering.net/crystalcalhp
This document is a catalog for PANDUCT wiring duct products. It includes sections that describe different types of wiring ducts for control panel applications, special environments, voice and data communications applications, as well as tools and accessories. Each section provides an overview and details individual product lines with part numbers, specifications and installation guidance. The document contains technical information sections with dimensions, fill capacities, material specifications and color options.
This document provides an overview of Panduct wiring duct products including:
- Sections on new products, control panel wiring ducts, special environment wiring ducts, voice and data wiring ducts, tools and accessories.
- Details on specific wiring duct types, accessories, installation tools and technical specifications.
- Contact information for technical support and a table of contents for navigating the document sections.
The Variable Area flowmeter is an instrument for metering the flowrate of liquids and gases in a pipeline. It includes a vertically oriented conical tube, whose diameter is larg- er at the top than at the bottom, through which the fluid flows upward and in which a vertically moving float is positioned.
This document provides information on RIVNUT® brand blind rivet nuts, including:
- RIVNUT® is the original internally threaded blind rivet invented in 1936 for aircraft applications.
- It describes various RIVNUT® product lines that are designed for different materials and applications, including the Original, PLUSNUT®, RIVKLE®, TW, and HRT models.
- It provides specifications and dimensions for each product line as well as information on compatible tools and applications in industries like transportation, construction, and electronics.
Jetronics India, established as manufacturers of connectors in 1985, has grown into a leading producer and
exporter of MILC5015 grade electrical connectors and related accessories.
Trident Pneumatics is India's largest exporter of compressed air treatment products with over 200,000 installations. They produce automatic drain valves under their EDV-X series that reliably drain sludge and rust from condensate tanks. The valves have adjustable timers and indicators for power and drain status. Trident Pneumatics has sales and service outlets in major Indian cities and their automatic drain valves are suitable for applications like air receivers, drop legs, and air dryers.
PR Electronics Signal Conditioning & Communication Interfaces Product CatalogPower Specialties, Inc.
Offering a wide range of analog and digital devices covering over a thousand applications in industrial and factory automation: Temperature transmitters and sensors.; I.S. Interfaces; Communication Interfaces ; Multifunctional signal conditioning devices; Isolation.
EagleBurgmann_Catalog Mechanical seals- Magnetic couplings_EN_22.07.2015Can ?irin
This document provides an overview of various mechanical seals and related products from EagleBurgmann including: mechanical seals for pumps, agitators, compressors, split seals, gas-lubricated seals, dry-running seals, standard cartridge seals, elastomer bellows seals, and magnetic couplings. It also briefly describes EagleBurgmann as a leading manufacturer of industrial sealing solutions offering a wide portfolio of standard and custom seals for applications across many industries.
This document provides installation and operation instructions for a Vortex Flow Meter. It discusses general information about the product, technical specifications, model selection details, cautions for installation, electrical wiring, programming and setup, and troubleshooting. The key points are that the flow meter works based on the Karman vortex principle, requires a minimum of 10 diameters of straight pipe upstream and 5 diameters downstream to achieve accurate measurements, and the installation must ensure the pipes remain fully filled with liquid to avoid measurement errors.
The document summarizes a portable blast machine system that:
1. Is rated for 150 psi and holds 2 cubic feet of blast media.
2. Comes equipped with pneumatic remote controls and includes an Apollo 600 HP respirator.
3. Is a high-performance blast cleaning system that removes corrosion and coatings from surfaces using abrasive media.
NORMA MANUAL PARA DETERMINAR REMANENTE ASME B31G-2023.pdfgerencia52
This document is the 2023 revision of the ASME B31G standard for determining the remaining strength of corroded pipelines. It provides evaluation methods and tables of allowable lengths of corrosion for various pipe sizes. The standard was developed by the ASME B31 Committee on Pressure Piping and is intended as a supplement to the ASME B31 Code for Pressure Piping.
Similar to Quick Coupling Products Guide - Commercial & Industrial (20)
Flow & Pressure Instrumentation for Biopharmaceuticals & Life SciencesMiller Energy, Inc.
Producing biopharmaceuticals is one of the world’s most demanding manufacturing processes. Brooks Instrument’s mass flow and pressure control technology helps maximize cell culture yields and control bioprocess costs. Brooks flow and pressure controllers set global standards for reliability, repeatability and long-term stability.
One Series Safety Transmitter - Pressure and Temperature Transmitter-SwitchMiller Energy, Inc.
The One Series Safety Transmitter simplifies installation, improves productivity, and eliminates nuisance trips. Sensor diagnostics with redundant data processing detect open, shorted, and plugged sensing elements.
Magnetrol Guide Wave Radar Level Transmitter For Hygienic ApplicationsMiller Energy, Inc.
This document provides information on the Eclipse Model 705 level transmitter for hygienic applications, including its features, descriptions, technology, applications, specifications, agency approvals, probe types, and remote assembly option. The transmitter is a loop-powered, 24 VDC level transmitter that uses guided wave radar technology to measure level, interface or volume. It has digital communication protocols, does not require calibration, and is designed for hygienic applications in the food and beverage industries.
Solenoid Valves for Water Conditioning and Purification Systems and EquipmentMiller Energy, Inc.
New composite valve technologies can offer notable benefits
when improved valves are specified for membrane-based filtration like reverse osmosis systems. Advantages include current certifications, ready availability, high reliability in challenging applications, ease of installation and use, and a choice of normally open and normally closed versions
Special RTD Temperature Sensor Configuration for Heat Trace ApplicationsMiller Energy, Inc.
Heat traced piping requires a means of temperature measurement to assure control of heat input to minimize energy consumption and maximize pipe and fluid temperature.
Maintenance Procedures for Yokogawa ADMAG TI Series AXW Magnetic Flow MeterMiller Energy, Inc.
The AXW series is ideal for industrial process lines, and water supply and sewage applications. With outstanding reliability and ease of operation, developed on decades of field-proven experience, the AXW will increase user benefits while reducing total cost of ownership.
Regulatory modifications have raised important issues in design and use of industrial safety systems. Certain changes in IEC 61508, now being widely implemented, mean that designers and users who desire full compliance must give new consideration to topics such as SIL levels and the transition to new methodologies.
Eclipse Model 706 High Performance Guided Wave Radar Level TransmitterMiller Energy, Inc.
The Eclipse® Model 706 high performance transmitter is a loop-powered, 24 VDC level transmitter that is based upon the proven and increasingly accepted technology of guided wave radar (GWR). Encompassing a number of significant engineering accomplishments, this leading edge level transmitter is designed to provide measurement performance well beyond that of many of the more traditional technologies.
Schubert & Salzer is a fast growing high-tech company, that develops, produces and distributes highly precise control and stop valves which are applied in the process industry.
Achieve superior accuracy and unmatched zero stability in ultra-low-flow gas and liquid measurement and control with the Quantim® Coriolis mass flow controllers and meters from Brooks Instrument. Brooks has taken the lead in driving improvements in Coriolis flow technology: Our patented Coriolis sensor design measures low flows independent of fluid type or process variables. The result: unsurpassed performance - the most accurate, stable, repeatable and reproducible mass flow measurement and control, even under changing conditions.
Verbatim Gateway is a field-proven, stand-alone alarm monitoring and reporting solution. More reliable than PC-based alarm systems, you can depend on it to perform in mission-critical applications due to its fault tolerance and internal battery backup. Robust yet affordable, Verbatim Gateway monitors operations and notifies personnel of problem conditions — anytime, anywhere — for a one-time cost. No extra service contracts or plug-ins required!
Rugged, NEMA 4X, epoxy coated enclosure
SPDT or DPDT switch output
Easy access wiring
Single switch output
Internal reference scale and adjustable deadband available
Adjustable ranges: ◦30 "Hg Vac to 5000 psi
• 1 bar Vac to 344 bar
• 0.2 "wcd to 500 psid
• 0,5 mbar d to 34,5 bar d
• -180 to 650 ºF
• -117 to 340ºC
Approvals: UL, CSA, CE, TUV
A straight forward device, the current to pneumatic converter produces a pneumatic output signal that is proportional to an electrical control level input signal of 4 to 20 mA or 10 to 50 mA. This provides a useful interface between electronic controllers and pneumatically operated valves, air cylinders, or other air operated control elements.
The Vanguard WirelessHART gas detector is ideal for the monitoring of toxic and combustible gases without the need for costly and fixed wiring. With a five year battery life and one button calibration, the Vanguard detector is easy to operate and maintain.
Each Vanguard detector has a WirelessHART transceiver, an antenna, a display, a long life power module, a gas sensor, and a signal processor for the gas sensor. Vanguard uses a sensor architecture trademarked “Flexsense,” which allows the sensor to identify its target gas and self-configure to a Vanguard transmitter upon connection.
Magnetrol is a globally recognized manufacturer of level and flow measurement instrumentation and devices. Technologies include inferential and direct measurement.
Making the best instrument selection for a flow measurement application should include an assessment of what the operators really need in order to safely and effectively run the process or perform the task related to the measurement of fluid flow.
Habonim Valves & Actuators is a leading manufacturer of ball valves and pneumatic actuators with over 50 years' experience and a worldwide reputation for its high quality, innovation and engineering expertise. Habonim supplies a wide range of 3-piece and flanged ball valves, as well as tailor-made solutions, generating significant cost and space savings for its customers.
Magnetrol International has launched the PULSAR Model R86 Non-Contact Radar transmitter, an advanced level control solution that offers radar technology with improved performance for a wide range of level measurement applications.
The PULSAR Model R86 is designed to provide
outstanding accuracy, reliability and safety for
virtually all process industries.
Utilizing an Aluminum Oxide sensor 600 times more sensitive than conventional sensors
The 8800 series uses field proven aluminum oxide (Al2O3) sensing technology to accurately detect trace moisture on either a continuous or spot checking basis.
ISO/IEC 27001, ISO/IEC 42001, and GDPR: Best Practices for Implementation and...PECB
Denis is a dynamic and results-driven Chief Information Officer (CIO) with a distinguished career spanning information systems analysis and technical project management. With a proven track record of spearheading the design and delivery of cutting-edge Information Management solutions, he has consistently elevated business operations, streamlined reporting functions, and maximized process efficiency.
Certified as an ISO/IEC 27001: Information Security Management Systems (ISMS) Lead Implementer, Data Protection Officer, and Cyber Risks Analyst, Denis brings a heightened focus on data security, privacy, and cyber resilience to every endeavor.
His expertise extends across a diverse spectrum of reporting, database, and web development applications, underpinned by an exceptional grasp of data storage and virtualization technologies. His proficiency in application testing, database administration, and data cleansing ensures seamless execution of complex projects.
What sets Denis apart is his comprehensive understanding of Business and Systems Analysis technologies, honed through involvement in all phases of the Software Development Lifecycle (SDLC). From meticulous requirements gathering to precise analysis, innovative design, rigorous development, thorough testing, and successful implementation, he has consistently delivered exceptional results.
Throughout his career, he has taken on multifaceted roles, from leading technical project management teams to owning solutions that drive operational excellence. His conscientious and proactive approach is unwavering, whether he is working independently or collaboratively within a team. His ability to connect with colleagues on a personal level underscores his commitment to fostering a harmonious and productive workplace environment.
Date: May 29, 2024
Tags: Information Security, ISO/IEC 27001, ISO/IEC 42001, Artificial Intelligence, GDPR
-------------------------------------------------------------------------------
Find out more about ISO training and certification services
Training: ISO/IEC 27001 Information Security Management System - EN | PECB
ISO/IEC 42001 Artificial Intelligence Management System - EN | PECB
General Data Protection Regulation (GDPR) - Training Courses - EN | PECB
Webinars: https://pecb.com/webinars
Article: https://pecb.com/article
-------------------------------------------------------------------------------
For more information about PECB:
Website: https://pecb.com/
LinkedIn: https://www.linkedin.com/company/pecb/
Facebook: https://www.facebook.com/PECBInternational/
Slideshare: http://www.slideshare.net/PECBCERTIFICATION
Beyond Degrees - Empowering the Workforce in the Context of Skills-First.pptxEduSkills OECD
Iván Bornacelly, Policy Analyst at the OECD Centre for Skills, OECD, presents at the webinar 'Tackling job market gaps with a skills-first approach' on 12 June 2024
How to Setup Warehouse & Location in Odoo 17 InventoryCeline George
In this slide, we'll explore how to set up warehouses and locations in Odoo 17 Inventory. This will help us manage our stock effectively, track inventory levels, and streamline warehouse operations.
Philippine Edukasyong Pantahanan at Pangkabuhayan (EPP) CurriculumMJDuyan
(𝐓𝐋𝐄 𝟏𝟎𝟎) (𝐋𝐞𝐬𝐬𝐨𝐧 𝟏)-𝐏𝐫𝐞𝐥𝐢𝐦𝐬
𝐃𝐢𝐬𝐜𝐮𝐬𝐬 𝐭𝐡𝐞 𝐄𝐏𝐏 𝐂𝐮𝐫𝐫𝐢𝐜𝐮𝐥𝐮𝐦 𝐢𝐧 𝐭𝐡𝐞 𝐏𝐡𝐢𝐥𝐢𝐩𝐩𝐢𝐧𝐞𝐬:
- Understand the goals and objectives of the Edukasyong Pantahanan at Pangkabuhayan (EPP) curriculum, recognizing its importance in fostering practical life skills and values among students. Students will also be able to identify the key components and subjects covered, such as agriculture, home economics, industrial arts, and information and communication technology.
𝐄𝐱𝐩𝐥𝐚𝐢𝐧 𝐭𝐡𝐞 𝐍𝐚𝐭𝐮𝐫𝐞 𝐚𝐧𝐝 𝐒𝐜𝐨𝐩𝐞 𝐨𝐟 𝐚𝐧 𝐄𝐧𝐭𝐫𝐞𝐩𝐫𝐞𝐧𝐞𝐮𝐫:
-Define entrepreneurship, distinguishing it from general business activities by emphasizing its focus on innovation, risk-taking, and value creation. Students will describe the characteristics and traits of successful entrepreneurs, including their roles and responsibilities, and discuss the broader economic and social impacts of entrepreneurial activities on both local and global scales.
Level 3 NCEA - NZ: A Nation In the Making 1872 - 1900 SML.pptHenry Hollis
The History of NZ 1870-1900.
Making of a Nation.
From the NZ Wars to Liberals,
Richard Seddon, George Grey,
Social Laboratory, New Zealand,
Confiscations, Kotahitanga, Kingitanga, Parliament, Suffrage, Repudiation, Economic Change, Agriculture, Gold Mining, Timber, Flax, Sheep, Dairying,
1. Quick Coupling Products
Quick Reference Guide
Bulletin 3800-QRG USA | April 2014
Miller Energy, Inc. | South
Plainfield, NJ | 800-631-5454
www.millerenergy.com
2. 10 Series
20 Series
50 Series
70 SeriesPneumatic Couplings
Pneumatic couplings, also referred to as single shut-off (SSO)
couplings, are typically used in compressed air applications to
connect air tools, equipment and hoses. Additional applications
include other gases and low pressure liquids. Parker pneumatic
couplings are offered in a wide range of interchanges, sizes,
materials, ports and other options to satisfy most every
pneumatic application.
Operation:..............................Manual Sleeve, Push-To-Connect
Size:...........................................................................1/4” to 3/4”
Material:....................................................... Brass and/or Steel
Locking Mechanism:............................ Fingers, Ball, Pawl Lock
Rated Pressure:..................................................... Up to 300 psi
Industrial Interchange
RF SeriesHF Series
HA Series
30 Series
TL Series
Parker’s E-z-mate coupler incorporates a secondary valve
sleeve that allows trapped internal pressure to be exhausted
prior to disconnect. Tool-Mate Couplers are made of a durable
composite yet are lightweight and non-marking.
Interchange:....................................................Industrial and RF
Operation:.......................................................Push-To-Connect
Size:.......................................................................... 1/4” to 3/4”
Material:.. Steel(E-z-mate Series), Polyamide (Tool-Mate Series)
Locking Mechanism:...............................Ball Lock and Fingers
Rated Pressure:.............................................................. 300 psi
Exhaust Type Couplers
E-z-mate Series
(Industrial
Interchange)
Tool-Mate
Series (PER)
Tool-Mate
Series (PBH)Universal
Series
Universal
Series
Operation:............................. Manual Sleeve, Push-To-Connect
Size:.......................................................................... 1/4” to 1/2”
Material:.......................................................Brass and/or Steel
Locking Mechanism:............................................................ Ball
Rated Pressure:.....................................................Up to 300 psi
Tru-Flate Interchange
Universal
Series
Operation:..............................Manual Sleeve, Push-To-Connect
Size:...................................................................................... 1/4”
Material:....................................................... Brass and/or Steel
Locking Mechanism:.............................................................Ball
Rated Pressure:..................................................... Up to 300 psi
ARO 210 Interchange
Operation:............................................................Manual Sleeve
Size:......................................................................................1/4”
Material:.......................................................Brass and/or Steel
Locking Mechanism:............................................................Ball
Rated Pressure:..............................................................300 psi
Lincoln Interchange
Operation:.......................................................Push-To-Connect
Size:.......................................................................... 1/4” & 3/8”
Material:.......................................................Brass and/or Steel
Locking Mechanism:...........................................Fingers & Ball
Rated Pressure:..............................................................300 psi
Common High Flow European Interchange
Operation:.......................................................Push-To-Connect
Size:.......................................................................... 1/4” & 1/2”
Material:.......................................................Brass and/or Steel
Locking Mechanism:...........................................................Cam
Rated Pressure:..............................................................300 psi
Schrader Twist-Lock Interchange
Tool-Mate Series
(PBS & PES)
Operation:............................................................Manual Sleeve
Size:...................................................................... 1/4” to 1-1/4”
Material:............................................................................Brass
Locking Mechanism:............................................................Ball
Rated Pressure:...............................................................0.5 psi
Special Purpose-Propane & Natural Gas
GF Series
3. Hydraulic Couplings
A wide variety of designs each tailored to a particular application.
Based on valving, hydraulic couplings generally are either Double
Shot-Off or Straight-Thru. Double Shut-Off couplings contain
shut-off valves in both halves, body and nipple. Used extensively
when loss of fluid is undesirable. Straight-Thru couplings have no
valves in either half and are ideal for maximum flow applications.
Used primarily for transfer of hydraulic fluid and also used
with chemicals, water, steam and some gases.
Size:.......................................................................1/8” to 2-1/2”
Material:..................................Brass, Steel and Stainless Steel
Locking Mechanism:................................................... Ball Lock
Rated Pressure:..................................................Up to 6,000 psi
Rated Flow:..........................................................Up to 200 GPM
General Purpose Hydraulic
60 Series
4000 Series
60 Series
Steam
6600 Series
4200 Series
HP SeriesSM Series
Used in rugged high pressure applications:
Portable hydraulic rams, construction, railway maintenance
and jacking equipment.
Size:.........................................................................1/4” to 1/2”
Material:................... Steel, Stainless Steel and Brass & Steel
Locking Mechanism:...........Ball Lock (FH, HO, TC, 71 Series)
Threaded (3000, 1141, 75 Series)
Rated Pressure:.............................................. Up to 15,000 psi
Rated Flow:..........................................................Up to 12 GPM
High Pressure Hydraulic
3000 Series
FH Series
TC Series
HO Series
1141 Series
Used extensively where hydraulic oil spillage could cause
safety hazards. Push-to-connect. Sleeve locking prevents
accidental disconnection. Employs flush valving for non-spill
connecting and disconnecting.
Size:............................................................................. 1/4” to 2”
Material:................................................... Steel, Stainless Steel
Polypropylene (PF Series only)
Locking Mechanism:................................................... Ball Lock
Rated Pressure:................................................Up to 10,000 psi
Rated Flow:............................................................Up to 50 GPM
Non-Spill Hydraulic
FH Series
FF Series
with FC
Connect-
Under-
Pressure
Nipple
Adapters
FEM (ISO 16028)
6600 series
(ISO 7241-1,
Series A)
FEM Series
with FEC
Connect-
Under-
Pressure
Nipple
Used where heavy duty, high pressure, mobile or maintenance
equipment is required. Push to connect and thread to connect
styles.
Size:..................................................................... 1/2” to 1-1/2”
Material:..............................................Steel, and Brass & Steel
Locking Mechanism:.... Ball Lock (9200 Lever 8200 and 5000
Series) Threaded (6100 Series)
Rated Pressure:.................................................Up to 3,000 psi
Rated Flow:.........................................................Up to 100 GPM
Connect Under Pressure Hydraulic
5000 Series
9200 Lever
8200 Series
6100 Series
Snap-tite
71 Series
Snap-tite
75 Series
FET Series
NS Series
Snap-tite
71 Series
PF Series
Chemical Transfer
FS Series
FET Series
Snap-tite
H Series
EA Series
4. Parker’s thermoplastic couplings offer light weight design
and chemical resistance to meet a broad range of coupling
applications. Valved and non-valved options on Spectrum and
PPA, PPM/PPL. PF is non-spill with flush valves.
Size:............................................................................ 1/8” to 2”
Material:........................... Acetal/SS, PVDF/SS, PVDF/PEEK™,
Polypropylene/SS
Locking Mechanism:........................... Finger Lock, Pawl Lock,
Push-Button Latch
Rated Pressure:................................................... Up to 145 psi
Rated Flow:.......................................................... Up to 50 GPM
Temp. Range:....................................................... Up to +250° F
PPM/PPL/PPA, Spectrum and PF Series
Thermoplastic Couplings
PF Series
Chemical Transfer
Spectrum Series
PPM/PPL/PPA
Series
Size:........................................................................... 1/4” to 2”
Material:................................................. Steel, Stainless Steel
Configurations:............................... Inline and 90° (PS Series)
90° (S Series)
Rated Pressure:.................................................Up to 5000 psi
Plating:................ Standard zinc and clear trivalent chromate
Port Options:.............................. NPTF, JIC 37° Flare, Female
NPSM Pipe Swivel, SAE O-Ring Boss
PS and S Series Swivels
Swivels
PS Series is ideal for an array
of dynamic high pressure
applications.
A wide variety of port options
are available.
S Series swivels offer a
pressure balanced, compact
forged body design.
A wide variety of port options
are available.
Used where maximum flow with lowest pressure drop is
desired - high pressure washers, mobile water tank lines or
connecting hose lines to hydro-blasting equipment.
Size:.......................................................................1/8” to 1-1/2”
Material:...Brass, Steel, Nickle Plated Steel and Stainless Steel
Locking Mechanism:....................................................Ball Lock
Rated Pressure:................................................ Up to 15,000 psi
Rated Flow:.......................................................... Up to 100 GPM
High Flow Hydraulic
1163 Series HO Series
ST Series
Specifically designed for connecting coolant lines to molds
and dies on injection molding machinery. Straight through/
Single Shut-Off. Extensions are available in various lengths.
Size:...........................................................................1/4” to 1/2”
Material:.............................................................................Brass
Locking Mechanism:.................................................... Ball Lock
Rated Pressure:...............................................................200 psi
Rated Flow:............................................................ Up to 12 GPM
Mold Coolant Couplings
Moldmate Series
Extension Nippples
Parker’s DM Series features double shut off valving in a
small envelope size.
Operation:........................................................Push-To-Connect
Size:.......................................................................................1/8”
Material:...................................................... Nickel Plated Brass
Locking Mechanism:.................................................... Ball Lock
Rated Pressure:...............................................................250 psi
Miniature Coupling
DM Series
Dust Plugs/Caps
Keep mating surfaces clean and free of contamination.
Size:.......................................................................1/8” to 1-1/2”
Material:....................................................... Aluminum, Rubber
5. Valves
CV, DT, DC and 2600 Series are unidirectional flow control
devices used primarily in hydraulic systems to eliminate
potential damage caused by fluid back pressure. CPIFF and
3C/S6C are soft seat check valves.
Size:........................................................................1/4” to 2”
Material:...........................Aluminum, Steel, Stainless Steel
Operating Pressure:...................................... Up to 6,000 psi
Crack Pressure:............................................... Up to 200 psi
Check Valves
H1, HM1 and PV Series are used to maintain positive
pressure in hydraulic tanks and reservoirs.
Filter Rating:..........................................10 micron, nominal
Pressure Relief Settings:.................................. Up to 50 psi
Vacuum Relief Settings:..............................................0.3 psi
Pressure/Vacuum Relief Valves
TH Series will modulate fluid temperature by shifting
return line flow through the cooler or bypassing it back to
the reservoir.
Port Size:....................................................................1” ORB
Shift Temps:....................100°F, 120°F, 140°F, 160°F, 180°F
Relief Valve Setting:..............................................5 to 85 psi
Rated Flow:................................................................60 GPM
Thermal Bypass Valves
Diagnostic Products
CV Series DT Series DC Series
2600 Series
H1/HM1 Series
TH Series
Parker’s Diagnostic equipment can identify hard-to-
detect variations in pressure, temperature and flow
quickly and easily.
Size:.....................................................1/8” (PD, PDP Series)
1/8” and 9/16 (EMA-3 Series)
Material:.........................................................................Steel
Locking Mechanism:......................Threaded (EMA-3 Series
Ball Lock (PD, PDP Series)
Rated Pressure:..................up to 6000 psi (PD, PDP Series)
Up to 9000 (EMA-3 Series)
SensoControl®
Products
• The Parker Service Master Plus,
Parker Service Master Easy
and Serviceman Plus Test
Meters
• ServiceJunior Digital Pressure
Gauges
Test Port/Fluid Sampling Couplings
• Transducers
• Flow Sensors
• Temperature Probes
• Test Meter Kits
PD Series
EMA-3 Series
PDP Series
PV Series Pressure
Vac Relief Valves
S6C/3C Series
CPIFF Series
6. Air Inclusion: The ambient atmosphere forced into the system
during the connection of the quick disconnect halves.
Break-Away: Automatic disconnection of a coupling when an
axial separation force is applied.
Brinelling: Dimples or grooves worn into the shoulder of a
male half by the locking balls in the female half.
Burst Pressure: The pressure at which a device loses the
capability to retain pressure.
Case Hardening: Hardening the surface of low carbon steel.
Cold Flow: Continued deformation under load.
Connect Under Pressure: Ability to connect coupling halves
with internal line pressure applied to either both sides or
one side.
Coupling, Female Half: Other nomenclature “coupler”,
“socket”, “body”.
Coupling, Male Half: Other nomenclature “nipple”, “plug”,
“adapter”.
Coupling, Quick Disconnect: A component which can
quickly join or separate a fluid line without the use of tools
or special devices.
Differential Pressure (ÆP): The difference in pressure
between any two points of a system or a component.
Double-Acting Sleeve: Permits push-to-connect and pull-to-
disconnect convenience on implement line when female half
is clamp mounted and connected with a hose.
Dust Cap: Dust or dirt repelling enclosure for both halves.
Dust Plug: Dust or dirt repelling enclosure both halves.
Flow Checking: Occurs when a nipple valve closes during
flow conditions, such as when quickly lowering a heavy
implement.(Also called Check Off, Back Checking or Lock-up.)
Flush Position (Valve): When the coupler valve is fully open,
allowing maximum oil flow.
Force to Connect: Axial and/or rotational force required to
make a complete connection.
Force to Disconnect: The reverse of the above.
Induction Hardening: Localized hardening of medium
carbon steel.
Peak Pressure: Maximum momentary pressure encountered
in the operation of a component.
Pressure Cap: Cap which incorporates a seal capable of
withstanding the rated pressures on the male half.
Pressure Impulse Test: Subjecting a component to a specified
pressure at a specified rate of increase or decrease for a
specified time limit.
Pressure Operating: The pressure at which a system
is operated.
Pressure Plug: Plug which incorporates a seal capable of
withstanding the rated pressures on the female half.
Proof Pressure: The non-destructive test pressure in excess
of the maximum rated operating pressure.
Push To Connect (Auto Lock): Locking arrangement which
permits one handed connection by pushing the nipple into
the coupler.
Rated Pressure: The maximum pressure at which a product
is designed to operate.
Single-Acting Sleeve: Permits pull-to-disconnect convenience
on implement line when female body is clamp mounted.
Making connection requires manually pulling female body
forward, inserting male tip, then allowing body and tip to return
to original position in the clamp.
Sleeve Lock: Arrangement which provides an additional
lock which must be actuated before the locking sleeve can
be retracted.
Spillage: The fluid removed from the system due to
disconnection of a coupling assembly. This is the fluid
trapped between the mating seal and the valve seal of the
coupling halves.
Surge Pressure: The pressure existing from surge conditions.
Surge Flows: A rapid increase in fluid flow.
Thermal Build-Up: Hydraulic pressure caused by expansion of
the fluid due to heat from an external source such as sunlight.
Trapped Pressure: Pressurized hydraulic fluid trapped behind
closed coupling valve.
Twist Lock: A locking arrangement which requires a rotational
actuation to unlock the mating halves.
Types of Quick Disconnect Coupling Valves:
Straight-Thru (ST): This provides straight through flow.
Double Shut-off Valve (DSO): A valve in the female half and a
valve in the male half.
Single Shut-off Valve (SSO): Generally, a valve in the female
half with no valve in the male half.
NOTE: Refer to Parker’s Publication No. 3800-B1.0: Safety
Guide for Selecting and Using Quick Action Couplings and
Related Accessories.
Glossary of Terms
Coupler Nipple Coupling
7. q What are the functional requirements of the coupling?
q What is the maximum working pressure of the application?
q Which seals and body material are compatible with the system’s fluid?
q Is the application static or dynamic?
q What size coupler/hose is required?
q What is the maximum pressure drop suitable for the application?
q Does the application require the ability to connect and disconnect under pressure?
q What is the media temperature and ambient temperature?
q What end configurations are required?
q Is an industry interchange coupler required?
q Is air inclusion and fluid loss a concern in the application?
FAILURE OR IMPROPER SELECTION OR IMPROPER USE OF THE PRODUCTS DESCRIBED HEREIN OR RELATED ITEMS
CAN CAUSE DEATH, PERSONAL INJURY AND PROPERTY DAMAGE.
• This document and other information from Parker-Hannifin Corporation, its subsidiaries and authorized distributors
provide product or system options for further investigation by users having technical expertise.
• The user, through its own analysis and testing, is solely responsible for making the final selection of the system and
components and assuring that all performance, endurance, maintenance, safety and warning requirements of the
0 are met. The user must analyze all aspects of the application, follow applicable industry standards, and follow the
information concerning the product in the current product catalog and in any other materials provided from Parker or its
subsidiaries or authorized distributors.
• To the extent that Parker or its subsidiaries or authorized distributors provide component or system options based upon
data or specifications provided by the user, the user is responsible for determining that such data and specifications are
suitable and sufficient for all applications and reasonably foreseeable uses of the components or systems.
Offer of Sale
The items described in this document are hereby offered for sale by Parker Hannifin Corporation, its subsidiaries or its
authorized distributors. This offer and its acceptance are governed by the provisions stated in the “Offer of Sale.”
Parker’s Quick Coupling Division, established in 1968, has been
supplying quality products to the marketplace since it’s inception.
With manufacturing facilities on two continents, Parker QCD
produces hydraulic and pneumatic products designed to meet the
demanding requirements of a wide variety of applications in a host
of markets including Agriculture, Automotive, Chemical, Off-Shore
Oil, Pulp and Paper, Food Processing, Printing and Publishing,
Plastics, Public Utilities, Construction, Alternative Fuels and others.
Quick Couplings are available in a variety of sizes and end
configurations ranging from 1/8 inch to 2-1/2 inches to
accommodate a broad spectrum of design requirements. Pressure
capabilities to 10,000 psi working pressure, port configurations
including metrics, body materials ranging from brass to 316
stainless steel to polypropylene, to the forefront of the Fluid
Connector Industry.
As the world’s largest manufacturer of Quick Couplings,
Parker QCD’s commitment is to the customer. The Quick
Coupling Division strives to improve by providing new products
and solutions to the market and developing state-of-the-art
technologies to provide the highest quality products at a
competitive price. Quality products not limited to standards,
but inclusive of many non-standard products designed to
meet specific customer requirements.
At Parker Quick Coupling, we view our customers as vital
partners. It is for this reason we will continue to develop
innovative solutions for our customers’ complex applications
and provide them with the very best in customer service.
Introduction
Checklist for Selecting Quick Couplings
Refer to Parker Catalog 3800 for more detailed product information.
Call Parker Information Center Toll Free: 1-800-C Parker (1-800-272-7537)
for catalogs, literature or additional information.
www.parker.com/quickcouplings