Mate Precision Tooling

1. Bending
Solutions
© Mate Precision Tooling Inc. All rights reserved.
FOR YOUR INSPIRATION

2. FOR YOUR INSPIRATION!
Fabricating jobs often require the
bending of parts. Typically,
fabricators use press brakes for
these operations.
Sometimes using a press brake
seems like overkill, especially on
smaller parts. A press brake adds
a secondary operation and cost to
a job that really may not need it.
Bending parts by hand could help
lower manufacturing costs and
speed time to delivery.
This folio shows actual customer
parts bending solutions that were
developed by Mate. We hope
they inspire you to do more with
your punch press.
© Mate Precision Tooling Inc. All rights reserved. 2

3. Bending Tool
3© Mate Precision Tooling Inc. All rights reserved.

4. Bending Tool
4© Mate Precision Tooling Inc. All rights reserved.

5. Border Bending Tool
5© Mate Precision Tooling Inc. All rights reserved.

6. EasyBend™ for manual
bending eliminates press
brake operation and allows
shipping in flat condition.
EasyBendTM Solutions
6© Mate Precision Tooling Inc. All rights reserved.
EasyBend Down
EasyBend Up

7. EasyBendTM Solutions
Special Solution in thick material:
EasyBend™ can help make sharp and
straight bends.
7© Mate Precision Tooling Inc. All rights reserved.

8. EasySnapTM Solutions
- V-line incision on top and bottom of
sheet
- Ideal for separation of parts
- Microjoint solution for smoother
edges 8© Mate Precision Tooling Inc. All rights reserved.

9. Bending lines
EasySnap lines
EasySnap can solve bending problems
… without burrs
V-die for bending
EasySnapTM Solutions
9© Mate Precision Tooling Inc. All rights reserved.

10. Short bends normally made on the
press brake are now
made possible with EasySnap
EasySnapTM Solutions
10© Mate Precision Tooling Inc. All rights reserved.

11. VariBendTM Bending Tool
11© Mate Precision Tooling Inc. All rights reserved.

12. VariBendTM Bending Tool
12© Mate Precision Tooling Inc. All rights reserved.

13. VariBendTM Bending Tool
13© Mate Precision Tooling Inc. All rights reserved.

14. Z-Bend Tool
(Etch #09138051)
14© Mate Precision Tooling Inc. All rights reserved.

15. © Mate Precision Tooling Inc. All rights reserved.
LIT01311