Alternative Parts, Inc. offers a wide range of Amada laser equipment and accessories. They provide a wide range of machines to suit your company's needs. Contact them to know more.

2. AMADA RESPONDS OFFERS AUTOMATIC TOOL CHANGER SERIES EQUIPMENTS
• During the last decade or so the competition faced by fabricators in the sheet metal fabrication industry
heavily focuses upon their ability to rapidly respond to the frequently changing market conditions. Press
brake departments often find it difficult to handle small quantity jobs as each job requires tooling
changeover time and a combination of high part configuration variety and low count batches can make
it more difficult for the manufacturers by resulting in bottlenecks. Press brake manufacturers like
Amada has responded to this changing market requirement and Amada Press Brake and Amada Punch
Press – those available now have reduced setup time for they can manage, store and also automatically
change the upper and lower tools. This certainly makes it possible for the operators requiring less time
for the physical setup process and spend more with the actually profit-making bending process.
• Anybody acquainted with the sheet metal fabrication industry is expected to be aware of the fact that
press brake tooling setup time accounts for around 6% of the total time required for bending jobs and
the new and Used Press Brake equipments with automatic options and systems for tooling set up can
certainly save a considerable amount of time. These can also make the operators life a little easier by
reducing the margin of error and they also create less scrap making it all the more beneficial for the
fabricators.

3. • The HD Automatic Tool Changer Series Amada Press Brake machines are also available online with
reliable Amada manufactured equipments, parts and services provider like Alternative Parts, Inc.
that makes quick automatic tool changing technology available in manual machines. These
machines allow the operators to manually bend the parts with automatic tool change operation
and there is also one offline programming software for showing an interactive tool layout display
showing tool placement on the control. These Amada new and Used Press Brake and punch press
machines are loaded with dies and punches of various lengths and are also equipped with tool
layout unit that can slide over to grab the tools and place them precisely at exact positions. This
allows the operator to ready the blanks and prepare for the bending process and thus saving the
time required for these jobs. This technology which was actually a part of Amada’s robotic bending
systems is now made available to stand alone machines for robotic bending not only has limited
capability regarding the different types of parts that it can bend but a robotic arm can also never
reproduce the movements of human operators arm.
• If you are aware of Amada machinery then you are certainly aware that Amada Punch Press and
press brakes available online with trusted service providers like Alternative Parts, Inc. are the best
available in the market. With their low operational cost, higher precision, longer runtime and ability
of completing jobs faster than hydraulic machines – they are certainly the best investments that
one can make for his sheet metal fabrication business and for more information on all available
machines you can also visit http://www.altparts.com/.

4. Contact Information
Alternative Parts Inc.
Address:
7 Sawgrass Drive,
Bellport, New York,
United States, 11713
Toll Free: 888-882-6001
Email: Steveg@altparts.com
Website: http://www.altparts.com/