Pyrolysis is the process of making fuel plastic plastic waste. in this process plastic waste are involve in endothermic reaction. the waste plastic are collected from various sources and get shredded . after that they are allow to heat at the temperature of ranging from 500 to more than 900 degree. bye this method the waste plastic are get converted into the usable fuel.

2.  From the literature review it is not a new technology ,
nowadays very famous for the purpose of making fuel.
 From the literature review, the pyrolysis reaction
consists of three progressive steps:
1.initiation
2.propagation,
3.termination.

3.  It is an method of producing fuel from
the plastic waste.
 Plastic waste are collected from various
places.
 Method involve in this process is
PYROLYSIS

4.  Greek word i.e. PYRO – heat , LYSIS – break down.
 Endothermic reaction
 Normally pyrolysis is carried out in two ranges:-
 Low temperature pyrolysis
 High temperature pyrolysis

5. We can not burn.
We can not dispose
Cause the pollution.
Not degradable
product.

6. Product obtained
are:-
Fuel
Gas
char

8.  The main objectives of this study
were to understand and optimize
the processes of plastic
pyrolysis.
 To maximizing the diesel range
products.
 to design a continuous pyrolysis
apparatus as a semi-scale
commercial plant.
 To study effects of other factors
like type of reactor, catalyst,
pressure and reflux rate .

9.  Low temperature pyrolysis in which the average reaction temperature is around 500 ° C.
 High temperature pyrolysis in which the average reaction temperature is around 900° C.
 Following are the methods of use:-
1. Destrugas system.
2. Garetts flash pyrolysis process
3. Process develop by ERCBM, Pittsburg.

10. • Pyrolysis has been attracting much attention due to high
efficiency & good environmental performance
characteristics.
• It also provides an opportunity for the processing of solid waste
into clean energy.