Harsh Mathur Final Year Project Report on Restaurant Billing System

Project report on
Restaurant Billing System
Submitted To
Dezyne E’cole College
Towards
The Partial Fulfilment
Of 2019 Year, Bachelor of Computer Application
By
Harsh Mathur
106/10, Civil Line, Ajmer
www.dezyneecole.com

GRADE SHEET
This project report has been made under the guidance of Mr. Tarun Sharma faculty of Bachelor
of Computer Application. This project focus on various parameter of Restaurant Billing System
The overall project report is________________________________________________
___________________________________________________________________________
___________________________________________________________________________
___________________________________________________________________________
_________________.
Principal Signature __________________
Date __________________

Contents
Acknowledgement................................................................................................................................... 1
Synopsis .................................................................................................................................................. 2
Chapter – 1 Introduction of Information Technology (IT) ..................................................................... 5
Chapter – 2 Introduction to Project......................................................................................................... 7
Chapter – 3 Project & Their Facilities .................................................................................................... 9
Chapter – 4 Project Design ................................................................................................................... 10
Chapter – 5 Database Development...................................................................................................... 14
Chapter – 6 System Requirements of PC............................................................................................ 113
Chapter – 7 Conclusion....................................................................................................................... 114
Bibliography........................................................................................................................................ 115

Page | 1
Acknowledgement
The satisfaction that accompanies that the successful completion of any task would be incomplete
without the mention of people whose ceaseless co-operation made it possible, whose constant guidance
and encouragement crown all efforts with success.
The project on Restaurant Billing System was developed in Visual Basic Language at Dezyne E’cole
College.
During the making of this project we have learnt a lot and we are extremely grateful and remain indebted
to our guide MR. Tarun Sharma for being a source of inspiration and for his constant support in the
design, implementation and evaluation of the project.
We are thankful to them for their constant constructive criticism and invaluable suggestions, which
benefited us a lot while developing the project on “Restaurant Billing System”.
He has been a constant source of inspiration and motivation for hard work. He has been very cooperative
throughout this project work.
Through this column, we express our warm thanks to him for their encouragement, co-operation and consent
without which we mightn’t be able to accomplish this project.
I cannot move on beloved without thank beloved Principal Mrs. Vinita Mathur for creating the required
academic environment which made my task appreciable.
We would like to thank the other faculty member also, at this occasion. Last but not the least, we would
like to thank our friends & family for support and encouragement they have given us during the course
of our work.
With due regards
Mr. Harsh Mathur
BCA 3rd Year

Page | 2
Synopsis
The project Restaurant Billing System gives us the facility to manage the Restaurants billing system.
This application is helpful for staff or admin for billing of food order and managing customers details.
This application is access by only staff and admin. Members can’t access it directly.
The project is very useful for those who want to know about Restaurants Billing System.
This application maintains the records related to Customers, and Sales etc.
We can enter the details of new food items and retrieve the details of food items and employees
available in the System. We can generate the bills for the customers. We can generate the membership
card for the customers. We can also maintain the records of customers .In this project we can maintain
the GST calculation of every food item. GST can be issued according to Govt. specified categories of
all the food itmes. Total sales can also be maintain in this project. All necessary requirements for the
Restaurants Billing System has presented in this project.

Page | 3
Introduction Page of Student
Qualification School/College Board/University Year Percentage
BCA-3rd
Year
Dezyne E’cole
College
M.D.S. University 2018-19 Pursuing
BCA-2nd
Year
Dezyne E’cole
College
M.D.S. University 2017-18 72.3%
BCA-1st
Year
Dezyne E’cole
College
M.D.S. University 2016-17 68.8
12th
MAPS CBSE 2015-16 63.8
10th
MAPS CBSE 2013-14 5.8(CGPA)
Harsh Mathur
Contact Information:
207/38,Rajoriya Building
Kayasth Mohlla,Purani
Mandi Ajmer (Raj.)
Phone:
0145-2624679
9509842953
E-mail:
E-mail:
mharsh631@gmail.comm
Personal Data:
Professional Qualification:
Pursuing Bachelor Degree in Computer Application from Dezyne E’cole
College, Ajmer Affiliated from Maharshi Dayanand Saraswati University, I
have mastered the basic languages and created lot of projects during my
study period to hone my skills.
Academic Qualification:
Date of birth: 18-Dec-1997
Nationality: Indian.
Date of birth: 18/09/1996
Technical Skills:
• Good command on the programming languages learnt in the first year of BCA, C,
,HTML, CSS,
MS Office and Data Structure.
• Good command on the programming languages learnt in the second year of BCA,
C++, JAVA,PHP
and Data Base Management System.
• Good command on the programming languages learnt in the third year of BCA,
VB, Relational
Data Base Management System, Oracle 10g, and Java Script.
Certifications:
• Two Months HTML and CSS Course Certifications.
• One Month PHP Course Certifications.
• One Month Android Develpoment Course Certifications.

Page | 4
Co-Curricular and Achievements:
• Participated in the Annual Identity Exhibition, 2016 at College on the concept of Rise of the robot.
• Participated in the Annual Identity Exhibition, 2017 at College on the concept Hooked and presented Project
on Banking System.
• Participated in the Annual Identity Exhibition, 2018 at College on the concept Future of me and
presented Project on Alert System and Holography.
• Participated in College Annual Event Kaleidoscope 2016 and 2017.
• Received 1st prize for Identity Exhibition in year 2017.
• Received 1st prize for Identity Exhibition in year 2018.
Main Projects Undertaken (During College Study):
Project made using languages HTML&CSS
• A website was created using HTML&CSS during my First year based on the concept Big Data.
You can see my work on the following link:
https://www.slideshare.net/dezyneecolebca3yrsprogram/harsh-mathur-bca-second-year-dezyne-ecole-
college?qid=040d9fb4-f1bc-4fc5-b181-80c63381a99e&v=&b=&from_search=3
Project made using languages HTML&CSS with PHP
• A website was created using HTML&CSS during my First year based on the concept Student
Management System.
You can see my work on the following link:
https://www.slideshare.net/harshmathur18/student-management-system-sms
Declaration: I hereby declare that particulars given here are true and complete to the best of my knowledge and
belief.

Page | 5
Chapter – 1 Introduction of Information Technology (IT)
Information Technology –
Set of tools, processes, and methodologies (such as coding, programming, data communication, data conversion,
storage & retrieval, system analysis & design, system control) and associated equipment employee to collect
process and present information. In broad terms, it also includes office automation, multimedia and Tele –
communication.
Information Technology, a source we call the “computer”, that can show you what information via Tele-portal,
scoping, working calibration for transmitting throughout the world.
More commonly known as I.T. is the most popular career and the fastest growing industry in the world. There
are several success stories about people who choose this field for a career and are now on top of their game.
Few reasons for why people choose IT -
 Low cost of education
The biggest advantage of choosing information technology for a career is that it has very low cost
of education as compared to many other career choices. You don’t need degree to become an I.T.
professional. Instead, you can get quick training to be certified in specific areas of information
technology. This way you save huge amounts of money that you may have otherwise spent on
years of college tuition.
 Fastest changing industry
The information technology industry operates at a speed much faster than any other industry and
for this reason, there’s always a significant demand for highly skilled workers with the innovations
in cloud computing, big data and cyber security an aspiring I.T. professional has many avenues to
pursue and grow from and I.T. professional never stops learning, and must always stay on top of
the latest technology trend in order to be successful in the field. The more training and knowledge
the I.T. professional has the more employable he or she will be.
 Better income
It is well known fact that information technology professionals are paid well, compared to other
professionals. An I.T. professional with the right mix of certifications & experience can find a
permanent position in either the public or private sector. Recently many companies have been
extensively hiring experts in cloud computing, cyber security and network security to help enhance
their current systems.
Bachelor of Computer Application
BCA is a part of information technology. In this age of computers and everything being digitalized,
knowledge about machines is very important. It helps the person have a distinct advantage over the others who
do not have a degree in computer applications. The domain is growing a rapid pace. In the 1990’s with the advent
of globalization computers grew in prominence and slowly started to replace the paper and files in offices. It
brought down the cost to quite an exist.

Page | 6
BCA is a three year undergraduate degree course. Students will be taught subjects which are related to the
technological applications that are requires in today’s practical work field.
1. Skills to be learnt –
Students who study for a bachelor of computer application (BCA) will get skills and information
not only about computer and information technology but also in communication, organization and
management.
One also get to learn programming languages such as C, C++, JAVA, JavaScript, HTML&CSS,
SQL, Foxpro etc.
2. Career opportunities –
BCA given a number of opportunities to individuals to go ahead and shine in their lives. The
opportunities available for people doing BCA are galore. A few of them like software programmer,
system and network administrator, web designer, faculty for computer science / communication
technology etc. the range of chances in information technology are immense.
According to our MDS University we have learnt many theory & practical subjects –
• First Year
o Management and accounting
o Computer fundamental
o PC software
o Fundamentals of C Programming
o Data structure and algorithm
o Multimedia Basic
• Second year
o Communication skills
o Database management system
o Client server technology
o Java Programming
o C++ Programming
o Computer Graphics
• Third year
o Visual Basic Programming
o Relational database management system
ORACLE / SQL)
o E - Commerce
o Computer Network and Mobile Computing
o Internet tools & website development
(JavaScript, ASP)
o Management Information System

Page | 7
Chapter – 2 Introduction to Project
The project is “Restaurant Billing System” software for monitoring and controlling the transactions in a
Restaurant.
The project Restaurant Billing System is developed on visual basic language which mainly focuses on basic
operation in a Restaurant like – Book Table,View Menu, Select Order, View Order, adding new member, &
updating new information,Generate Bill, Calculate Discount and Tax, Select Payment Mode ,Generate Report.
Restaurant Billing System is a windows application designed to help users maintain & organize Restaurant. Our
application is easy to use for both beginners & advanced users. It features a familiar and well thought – out, an
attractive user interface, combined with strong searching, insertion & deletion capabilities. It can generate a
Membership card for member of Restaurant.
The application Restaurant Billing system has four main module –
 Insertion, Deletion, Updation to database module – User friendly input screen.
 Extracting from the database module –Attractive output screen.
 Generate Membership card module – Further Discount though card.
 Search facility system Module – Search for members.
The Restaurant Billing System is designed and develop for a receipt and of book tables in the restaurants along
with the member’s details.
Why it is made –
The main objective of this project is to provide a friendly environment to maintain the details of restaurants and
library members. The main purpose of this project is replace the manually work.
What Language –
Visual Basic 6.0 Language
Visual basic (VB) is a 3rd
generation event-driven programming language developed by Microsoft for their
operating system windows. Visual basic is a widely understood high level programming language, written using
simple English. Like – words & syntax.
It is an interpreted language. Code can be run immediately after being written. Having an interpreter makes its
simpler to use, as there is no need for the computer to compile the code, possibly finding errors to fix, before the
compiled version can be run. Once the code is working, it can be compiled into an .exe file so that it will run on
all modern windows computers, whether VB is installed or not. The language allows a beginning programmer to
produce professional – looking windows applications, as its include drawing tools to create normal windows and
structures which allow programs to be adapted for use with the internet. VB will not run on operating systems
other than windows.
Visual Basic has its origin in basic which was developed round about the year 1960, when high level languages
were just being introduced to the computer community. Microsoft has made it extremely powerful by gearing all
its good features to the windows environment.

Page | 8
Evaluation of Visual Basic –
VB 1.0 was introduced in 1991. The drag and drop design for creating the user interface is derived from prototype
from generator developed by Allan cooper and his company called Tripod. Microsoft contracted with cooper and
his associates to develop Tripod into a programmable form system for windows 3.0, under the code name Ruby
(no relation to the Ruby programming language). Tripod did not include a programming language at all. Microsoft
decided to combine Ruby with the basic language to create Visual Basic.
Need of Visual Basic –
Visual Basic is easy to learn programming language. With Visual Basic you can develop windows based
applications and Games. Visual Basic is much easier to learn than others language (like Visual C++), and yet it’s
powerful programming language. Visual Basic suite more for desktop application developing than for Games
developing. You can create sophisticated games using Visual Basic, Visual Basic will be probably powerful
enough to suite all your application and games programming needs.
Integrated Development Environment –
The working environment in VB is often referred to as the Integrated Development Environment or IDE,
because it integrates many different functions such as design, editing,
compiling and debugging within a common environment. Since all our projects are developed only in the IDE.

Page | 9
Chapter – 3 Project & Their Facilities
Restaurant Billing System is a project which aims in developing a computerized system to maintain all the daily
work of library. This project has many features which are generally not available in normal Restaurant Billing
System like – Staff login. It has also a facility where member issue a book so all details of restaurant issue date
and return date show. It has a facility where we add a new member so member card will be create for member.
Overall this project is ours is being developed to help the schools, organizations, college to maintain the
library in the best way possible and also reduce the human efforts.
Here is a list of some features which are in provided in this application –
 Keep records of different categories like – Customers Name, Phone Number etc.
 Classify the customers Name wise.
 Easy way to enter new Customers.
 Easy way to Log-In and Log-Out.
 Automatic GST calculation.
 Different criteria for searching a Customers.
Objective of Restaurant Billing System –
1. Automation –The application automates each and every activity of the manual system and increases its
throughput. Thus the response time of the system is very less and it works very fast.
2. Accuracy – The application provides the user a quick response with very accurate information regarding the
user etc. any details or system in an accurate manner, as when required.
3. User Friendly – The application Restaurant Billing System has a very user friendly interface. Thus the users
will full very easy to work on it. The application provides accuracy along with a pleasant interface. Make the
present manual system more interactive, speedy and user friendly.
4. Availability – The all transaction of restaurant stored permanently in the database admin can see the data in
the availability of any information, whatever needed.
5. Maintain Cost – Reduce the cost of maintenance. It is standalone application so no required of cost for
maintain it.

Page | 10
Chapter – 4 Project Design
The project design process is not a step by step. But still much of design work depends on knowledge and
experience of the designs, when we start working on project design, we will face different types of problems.
However, following considerations should be kept in mind during the project design phase:
Design Objectives –
The primary objective of the design of course, is to deliver the requirements as specified already. In
general the following design objectives kept in mind. Practically –
The system must be stable and can be operated by people with average.
Efficiency –
This involves accuracy, timeliness, and comprehensiveness to the system output.
Cost –
It is desirable to aim for a system with a minimum cost subject to the condition that it must satisfy all
requirements & maintain maintenance.
Flexibility –
The system should be modifiable depending on the changing needs if the user. It should also be portable
to different computer system but not other than Windows OS.
Security –
This is very important aspect of the design and should cover areas of hardware reliability, fall back
procedures, physical security if the data. System design involves first logical design and then physical
construction of the system.
Major Project Design Activities –
Several development activities are carried out during structured design. They are database design,
implementation planning, and system interface.
Design Process –
The system design process is an exercise of specifying how, the system will work. It is an interactive
process which is based on what the system will be do as shown in the report. Mainly following two parts have
been included in the system design process.
1. Output Design –

Page | 11
The starting point of the design process is the proper knowledge of system requirements which
will normally be converted on terms of output.
2. Input Design –
Once the output requirements have been finalized the next step in to find out what data need to
be made available to the system to procedure the desired outputs.
Data Flow Diagrams of Restaurant Billing System
 DFD Level 0
Admin Restaurant Billing
SystemSystem
Request
Response
 DFD Level 1
System Database
Request Request
Response Response
 DFD Level 2
System
Database
Interaction Store in MS Access

Page | 12
 DFD Level 3
System
Database
Interaction Store in MS
Access
Display Message
Configuration
Book Table View Food Select Food Enter Quantity
Create Membership
Card
Select Payment
Mode
Proceed
Bill Payment
Invoice Generated
View Ordered
Food
Insert, Save, Update, Save Update, Delete, Search

Page | 13
 DFD Level 4
System
Database
Interaction Store in MS
Access
Display Message
Configuration
Membership Cards
Create
Membership
Security
Exists
Customer
New
Customer
Update
Existing
Data

Page | 14
Chapter – 5 Database Development
This activity deals with the design of the physical database. A key is to determine how the access path art to be
implemented.
As a programmer, we are expected to design and develop any program that works correctly efficiently and the
time is easy to be used by every person, who may or may not be well versed with computer and its capabilities.
The project is based on the Library Management System, Being the Information System it requires extensive use
of some Database Management System to store, manipulate & handle the huge and complex record. In DBMS
we can act various attributes with the database like editing the records, modifications, deletions of the records,
view the records in various formats, listing the database etc.
MS Access –
Microsoft Access is an office product that allows the user to create relational databases that have tables of data.
MS Access stores data in its own format based on the Access Jet Database Engine. It can also import or link
directly to data stored in other applications & databases. It’s an easy to use tool for quickly creating browser based
database applications.
In very simple term, MS Access is an Information Management tool that helps you store information for
reference, reporting & analysis.
Microsoft Access helps you analyze large amount of information, and manage related data more efficient than
MS Excel or other spreadsheet applications.
In our project we create 10 tables in MS Access-
 Table Number
Field Name Data Type
ID Short Text
Name Short Text
Price Short Text
Category Short Text

Page | 15
 Bill
ID Short Text
Date Short Text
Name Short Text
Phone Short Text
Total_Item Short Text
Total_qty Short Text
Sub_Total Short Text
Cgst Short Text
Sgst Short Text
Total_gst Short Text
After_tax_amt Short Text
Dis_amt Short Text
Grand_total Short Text
Payment_mode Short Text
Time Short Text
Day Short Text
Month Short Text
Year Short Text
 Bill Detail
B_ID Short Text
Item_id Short Text
Item_name Short Text
Item_qty Short Text
Item_price Short Text
Item_amount Short Text

Page | 16
 Customer
Name Short Text
Phone Short Text
 Membership Card
M_no Short Text
Name Short Text
Phone Short Text
Issue Short Text
Valid Short Text
 Menu
ID Short Text
Name Short Text
Price Short Text
Category Short Text

Page | 17
All Forms and Coding of our project:
Front Page
private Sub Close_Click()
Unload Me
End Sub
Private Sub Close_MouseMove(Button As Integer, Shift As Integer, X As Single, Y As Single)
Shape1.BackColor = RGB(185, 0, 0)
End Sub
Private Sub CLOSEL_Click()
Unload Me
Unload BILLFORM
Unload BOOKTABLEFORM

Page | 18
Unload MENUFORM
Unload VIEWORDERFORM
Unload MEMBERSHIPFORM
End Sub
Private Sub CLOSEL_MouseMove(Button As Integer, Shift As Integer, X As Single, Y As Single)
CLOSES.BackColor = vbRed
End Sub
Private Sub Form_MouseMove(Button As Integer, Shift As Integer, X As Single, Y As Single)
CLOSES.BackColor = RGB(180, 180, 180)
For i = 0 To 3
BTS(i).BorderColor = vbBlack
Next
End Sub
Private Sub Form_Load()
'MsgBox Screen.Width * 0.4 & Screen.Height * 0.4
With me
.Width = Screen.Width * 0.6
.Height = Screen.Height * 0.73
.Left = Screen.Width * 0.2
.Top = Screen.Height * 0.1
'.BackColor = RGB(20, 180, 248)
End With
With Image1
.Width = Me.Width
.Height = Me.Height
.Left = 0 .Top = 0
.Picture = LoadPicture(".databack.jpg")
'.Enabled = False

Page | 19
End With
With CLOSES
.Width = 650
.Height = 350
.Left = Me.Width - 640
.Top = 10
.BackColor = RGB(180, 180, 180)
End With
With CLOSEL
.Width = 650
.Height = 350
.Top = 20
End With
For i = 0 To 2
With BTS(i)
.Width = Me.Width * 0.27
.Height = Me.Height * 0.05
.Top = Me.Height * 0.025
If i = 0 Then
.Left = Me.Width * 0.04
ElseIf i = 1 Then
ElseIf i = 2 Then
End If
End With
Next
For i = 0 To 2
With Label1(i)

Page | 20
.Alignment = 2
If i = 0 Then
ElseIf i = 1 Then
ElseIf i = 2 Then
ElseIf i = 3 Then
End If
End With
Next
'
End Sub
Private Sub Image1_Click()
Unload BILLFORM
'Unload BOOKTABLEFORM
Unload MENUFORM
For i = 0 To 2
BTS(i).BackStyle = 0
Label1(i).ForeColor = vbBlack
Next
End Sub
Private Sub Image1_MouseMove(Button As Integer, Shift As Integer, X As Single, Y As Single) CLOSES.BackColor =
RGB(180, 180, 180)

Page | 21
For i = 0 To 2
Next
End Sub
Private Sub Label1_Click(Index As Integer)
If Index = 0 Then
BOOKTABLEFORM.Show
Unload MENUFORM
ElseIf Index = 1 Then
MENUFORM.Show
ElseIf Index = 2 Then
VIEWORDERFORM.Show
Unload MENUFORM
End If
For i = 0 To 2
BTS(i).BackStyle = 0
Label1(i).ForeColor = vbBlack
Next
With BTS(Index)
.BackStyle = 1
.BackColor = vbBlack
End With
Label1(Index).ForeColor = vbWhite
End Sub
Private Sub Label1_MouseMove(Index As Integer, Button As Integer, Shift As Integer, X As Single, Y As Single)

Page | 22
For i = 0 To 2
Next
BTS(Index).BorderColor = vbWhite
End Sub
Book Table
Private Sub Form_Activate() Call connect rs1.Close rs1.Open
"select distinct t_no from tablenumber"
'MsgBox rs1.RecordCount
If rs1.RecordCount = 0 Then
For i = 0 To 10
With TL1(i)
.Caption = ""
.Enabled = False
.Tag = "0"
End With

Page | 23
Next
End If
While Not rs1.EOF
For i = 0 To 10
If Image3(i).Tag = rs1.Fields(0) Then
With TL1(i)
.Caption = "Booked!!"
.Enabled = True
.Tag = "1"
End With
'MsgBox rs1.Fields(0)
End If
Next rs1.MoveNext Wend
End Sub
With Me
.BackColor = vbWhite
End With
With Image2
.Width = Me.Width
.Height = Me.Height
.Left = 0
.Top = 0
.Picture = LoadPicture(".databack11.jpg")
End With

Page | 24
With LWAITER
.Stretch = True
.LoadAnimatedGIF_File (".DataLwaiter.gif")
End With
With RWAITER
.Stretch = True
.LoadAnimatedGIF_File (".DataRwaiter.gif")
End With
For i = 0 To 10
With Image3(i)
.Stretch = True
.LoadAnimatedGIF_File (".Datatable.gif")
.ToolTipText = "Table No : " & i + 1
.Tag = i + 1
If i = 0 Then
ElseIf i = 1 Then
ElseIf i = 2 Then
ElseIf i = 3 Then
ElseIf i = 4 Then

Page | 25
i = i + 1
ElseIf i = 6 Then
ElseIf i = 7 Then
ElseIf i = 8 Then
ElseIf i = 9 Then
ElseIf i = 10 Then
End If
End With
Next
With Image3(5)
.Stretch = True
.ToolTipText = "Table No : " & 6
.Tag = 6
.LoadAnimatedGIF_File (".Databigtable1.gif")
End With
For i = 0 To 10

Page | 26
With Label1(i)
.BackStyle = 1
.FontSize = 12
.BackColor = RGB(255, 100, 0)
.ForeColor = vbWhite
If i = 0 Then
ElseIf i = 1 Then
ElseIf i = 2 Then
ElseIf i = 3 Then
ElseIf i = 4 Then
.Top = Me.Height * 0.52 .Left =
Me.Width * 0.21
ElseIf i = 5 Then
ElseIf i = 6 Then
ElseIf i = 7 Then

Page | 27
ElseIf i = 8 Then
ElseIf i = 9 Then
ElseIf i = 10 Then
End If
End With
Next
For i = 0 To 10
With TL1(i)
.Enabled = False
.BackStyle = 0
.Alignment = 2
.FontName = "consolas"
.FontBold = True
.FontSize = 15
If i = 0 Then
ElseIf i = 1 Then

Page | 28
ElseIf i = 2 Then
ElseIf i = 3 Then
ElseIf i = 4 Then
ElseIf i = 5 Then
ElseIf i = 6 Then
ElseIf i = 7 Then
ElseIf i = 8 Then
ElseIf i = 9 Then
ElseIf i = 10 Then
End If
End With

Page | 29
Next
End Sub
Private Sub Close_Click()
Me.Hide
End Sub
Private Sub Close_MouseMove(Button As Integer, Shift As Integer, X As Single, Y As Single) Shape1.BackColor =
RGB(185, 0, 0)
End Sub
Private Sub Image3_Click(Index As Integer) i = Index
TL1(i).Enabled = True
TL1(i).Caption = "Booked!!"
TL1(i).Tag = "1"
End Sub
Private Sub Label2_Click()
Form1.Show
End Sub

Page | 30
View Menu
Dim l As ListItem
Dim TABLENO, I_ID, I_NAME, ITEM_NAME, I_PRICE As Variant
Dim I_QTY, AVAILABEL_QTY As Integer
Private Sub ATF_Click()
End Sub
Private Sub CANCELQTYBTN_Click()
QTYTEXT = ""
Frame1.Visible = False 'Frame1 for Take Input Qty from User
End Sub

Page | 31
Me.Hide
MENULISTFORM.Hide 'Add Itmes In Order List.
'OPTIONFORM.Show
End Sub
Shape2.BackColor = RGB(185, 0, 0) 'Shape2 for Close Button
End Sub
Private Sub Command1_Click()
MENUF2.Visible = True 'Secound Form of Menu
MENUF1.Visible = False 'First Form Of Menu
End Sub
MENUF2.Visible = False
MENUF1.Visible = True
End Sub
Private Sub Form_Activate()
Call connect rs1.Close rs1.Open "select distinct t_no from
tablenumber"
While Not rs1.EOF
For i = 0 To 10
If BOOKTABLEFORM.Image3(i).Tag = rs1.Fields(0) Then
With BOOKTABLEFORM.TL1(i)
.Enabled = True
.Tag = "1"

Page | 32
End With
End If
Next rs1.MoveNext
Wend
For i = 0 To 10
If BOOKTABLEFORM.TL1(i).Tag = "1" Then
With TNL(i)
.Enabled = True
.ForeColor = vbBlack
Shape1(i).BackStyle = 1
Shape1(i).BackColor = vbWhite
End With
Else
With TNL(i)
.Enabled = False
Shape1(i).BackColor = RGB(200, 200, 200)
End With
End If
Next
End Sub
Private Sub Form_Click()
Unload Me
End Sub

Page | 33
Me.FontName = "century gothic"
Label3(0).Tag = "ATF"
Label3(1).Tag = "Sandwich"
Label3(2).Tag = "Burger"
Label3(3).Tag = "Pizza"
Label3(4).Tag = "Noodle"
Label3(5).Tag = "Chats"
With Me
.FontSize = 12
.FontName = "century gothic"
.BackColor = vbRed
End With
For i = 0 To 1
With Image1(i)
.Width = Me.Width
.Height = Me.Height
.Left = 0 .Top = 0
.Stretch = True
End With
Next
With MENUF1
.Width = Me.Width
.Height = Me.Height
.Left = 0 .Top = 0
.BorderStyle = 0

Page | 34
End With
With MENUL
.Top = Me.Height * 0
.Caption = "MENU"
.Alignment = 2
.BackStyle = 0
End With
' Table Number label
For i = 0 To 10
With TNL(i)
.Enabled = False
.BackStyle = 0
End With
Next
With MENUF2
.Width = Me.Width
.Height = Me.Height
.Left = 0 .Top = 0
.BorderStyle = 0
.Visible = False
End With
With Frame1

Page | 35
.Left = Me.Width / 2 - Frame1.Width / 2
.Top = Me.Height / 2 - Frame1.Height / 2
.BorderStyle = 0
.BackColor = RGB(210, 255, 255)
End With
With FRAMEBACK
.Width = Frame1.Width
.Height = Frame1.Height
.Left = 0 .Top = 0
.Stretch = True
End With
With ENTERQTYLABEL
.Height = Frame1.Height * 0.15
.Top = Frame1.Height * 0.1
.Alignment = 2
.Left = 0
.BackStyle = 0
End With
With ERRMSG
.Alignment = 2
.Left = 0
.BackStyle = 0
.Caption = ""
.ForeColor = vbRed
End With

Page | 36
With QTYTEXT
.Width = Frame1.Width * 0.4
.Left = Frame1.Width * 0.3
End With
With CANCELQTYBTN
End With
With OKQTYBTN
End With
.Caption = "All Time Favourite"
ElseIf i = 1 Then
.Caption = "Sandwich"
ElseIf i = 2 Then
.Caption = "Burger"
ElseIf i = 3 Then
.Caption = "Pizza"

Page | 37
ElseIf i = 4 Then
.Caption = "Noodle"
ElseIf i = 5 Then
.Caption = "Chats"
End If
End With
Next
With LV1
.ColumnHeaders(1).Width = 3000
End With
With LV2
End With
With LV3

Page | 38
End With
With LV4
End With
With LV5
End With
With LV6
End With
For i = 0 To 5
With Label1(i)
.Alignment = 2
.ForeColor = vbBlack 'RGB(255, 100, 0)
End With

Page | 39
If i < 3 Then
With Label1(i)
End With
End If
If i < 6 And i > 2 Then
With Label1(i)
End With
End If
Next h = Me.Height * 0.02 For i = 0
To 2
With Label1(i)
.Top = h
End With h = h + Me.Height * 0.32
Next h = Me.Height * 0.02
For i = 3 To 5
With Label1(i)
.Tag = "Ice_Cream"
End With
With LV7
End With
With LV8

Page | 40
End With
With LV9
End With
With LV10
End With
With LV11
rs.MoveNext Next
rs.Close rs.Open "select name,price from menu where category='" & Label3(2).Tag & "'"
For i = 1 To rs.RecordCount
Set l = LV3.ListItems.Add(, , rs.Fields(0))
l.SubItems(1) = rs.Fields(1) rs.MoveNext
Next
l.SubItems(1) = rs.Fields(1)
rs.MoveNext Next

Page | 41
l.SubItems(1) = rs.Fields(1) rs.MoveNext Next rs.Close rs.Open "select name,price from
menu where category='" & Label3(5).Tag & "'"
rs.MoveNext Next rs.Close
rs.Open "select name,price from menu where category='" & Label1(1).Tag & "'"
rs.MoveNext Next
rs.MoveNext Next
rs.MoveNext Next

Page | 42
rs.Close rs.Open "select name,price from menu where category='" & Label1(5).Tag & "'" For i =
1 To rs.RecordCount
rs.MoveNext Next
rs.Close
End Sub
Private Sub STARTERL_Click()
End Sub
Private Sub Frame1_MouseMove(Button As Integer, Shift As Integer, X As Single, Y As Single)
QTYTEXT.SetFocus
End Sub
MENULISTFORM.Show
End Sub
Private Sub LV1_ItemClick(ByVal Item As ComctlLib.ListItem)
'MsgBox TABLENO & Item
If TABLENO = 0 Then
MsgBox "SELECT YOUR TABLE"
Else
ITEM_NAME = Item
Frame1.Visible = True
QTYTEXT.Text = ""
End If
End Sub

Page | 43
If TABLENO = 0 Then
Else
ITEM_NAME = Item
QTYTEXT.Text = ""
End If
End Sub
If TABLENO = 0 Then
Else
ITEM_NAME = Item
QTYTEXT.Text = ""
End If
End Sub
Sub additem()
'On Error Resume Next
Call connect
rs.Close
rs.Open "select * from menu where name='" & ITEM_NAME & "' "
If rs.RecordCount = 1 Then
I_ID = rs.Fields(0)
I_NAME = rs.Fields(1)
I_PRICE = rs.Fields(2) End If
rs1.Close
rs1.Open "select * from tablenumber where item_name='" & ITEM_NAME & "' and t_no= '" & TABLENO
& "'"

Page | 44
If rs1.RecordCount >= 1 Then 'MsgBox
rs1.RecordCount
rs1.Close
rs1.Open "update tablenumber set item_qty = item_qty + '" & I_QTY & "' where item_name='" & ITEM_NAME
& "' and t_no= '" & TABLENO & "'" MENULISTFORM.ORDERVIEW.ListItems.Clear
rs1.Open "select * from tablenumber where t_no='" & TABLENO & "'"
For j = 1 To rs1.RecordCount
Set l = MENULISTFORM.ORDERVIEW.ListItems.Add(, , rs1.Fields(2))
l.SubItems(1) = rs1.Fields(4)
l.SubItems(2) = rs1.Fields(3) rs1.MoveNext
Next
Else
With rs1
.Close
.Open "select * from tablenumber"
.AddNew
.Fields(0).Value = TABLENO
.Fields(1).Value = I_ID
.Fields(2).Value = I_NAME
.Fields(3).Value = I_PRICE
.Fields(4).Value = I_QTY
.Update
End With
MENULISTFORM.ORDERVIEW.ListItems.Clear
rs1.Close

Page | 45
Next
End If
End Sub
Private Sub OKQTYBTN_Click()
If QTYTEXT = "" Or Val(QTYTEXT) < 1 Then
ERRMSG.Caption = "error : ENTER QTY !!"
Else
I_QTY = QTYTEXT.Text
Frame1.Visible = False
Call additem
End If
End Sub
Private Sub TNL_Click(Index As Integer)
For i = 0 To 10
With TNL(i)
.Enabled = True
End With
Else
With Shape1(i)
.BackStyle = 0
.BackColor = RGB(200, 200, 200)
End With
End If
Next

Page | 46
For i = 0 To 10
If Index = i Then
With Shape1(Index)
.BackStyle = 1
TNL(i).ForeColor = vbWhite Call connect
rs1.Close rs1.Open "select * from tablenumber"
TABLENO = Index + 1
MENULISTFORM.TABLENOLABEL.Caption = "Table No : " & TABLENO
End With
End If
Next rs1.Close
MENULISTFORM.ORDERVIEW.ListItems.Clear rs1.Open "select * from
tablenumber where t_no='" & TABLENO & "'"
Next
rs1.Close
End Sub
Order Food

Page | 47
Me.Hide
End Sub
With Me
.FontSize = 12
End With
With Image1
.Width = Me.Width
.Height = Me.Height
.Top = 0 .Left = 0

Page | 48
.Stretch = True
End With
With TABLENOLABEL
.Font.Name = "Rockwell"
.Alignment = 2
.FontSize = 20
.BackStyle = 0
.Caption = ""
End With
With ORDERVIEW
.ColumnHeaders(1).Width = ORDERVIEW.Width * 0.47
.Font.Name = "Rockwell"
End With
End Sub
View Order

Page | 49
Public TABLENUMBER As Variant
Dim l As ListItem
Dim TOTAL_AMOUNT, TABLENO As Variant
Unload Me
End Sub
CLOSESH.BackColor = RGB(185, 0, 0)
End Sub
Call connect rs1.Close
rs1.Open "select distinct t_no from tablenumber"

Page | 50
While Not rs1.EOF For i = 0 To 10
If BOOKTABLEFORM.Image3(i).Tag = rs1.Fields(0) Then
With BOOKTABLEFORM.TL1(i)
.Enabled = True
.Tag = "1"
End With
End If
Next rs1.MoveNext Wend
For i = 0 To 10
With TNL(i)
.Enabled = True
End With
End If Next
TABLENO = 0
End Sub
With Me
.FontSize = 12

Page | 51
.BackColor = RGB(240, 240, 240)
End With
With Image1
.Width = Me.Width
.Height = Me.Height
.Left = 0 .Top = 0
.Stretch = True
End With
For i = 0 To 10
With TNL(i)
.Enabled = False
.BackStyle = 0
End With
Next
For i = 0 To 3
With Label1(i)
If i = 0 Then
ElseIf i = 1 Then
ElseIf i = 2 Then
ElseIf i = 3 Then

Page | 52
End If
End With
Next
With ORDERVIEW
.ColumnHeaders(4).Width = ORDERVIEW.Width * 0.185 End With
With TOTALAMOUNTS
.BorderWidth = 2
'.Visible = False End With
With TOTALAMOUNTL
End With
'SHAPE
With GENERATEBILLS

Page | 53
.BorderWidth = 2
End With
'LABEL
With GENERATEBILLL
.Caption = "NEXT"
End With
End Sub
Private Sub GENERATEBILLL_Click()
If TABLENO > 0 Then
TABLENUMBER = TABLENO
Me.Hide
'MsgBox TABLENUMBER
MEMBERSHIPFORM.Show
End If
End Sub
Private Sub GENERATEBILLL_MouseDown(Button As Integer, Shift As Integer, X As
Single, Y As Single)
GENERATEBILLL.BackColor = RGB(255, 100, 0)
End Sub
Private Sub GENERATEBILLL_MouseUp(Button As Integer, Shift As Integer, X As Single, Y As Single)
GENERATEBILLL.BackColor = RGB(255, 180, 0)

Page | 54
End Sub
Private Sub TNL_Click(Index As Integer)
For i = 0 To 10
With TNL(i)
.Enabled = True
End With
End If
Next
TOTALAMOUNTS.Visible = True
ORDERVIEW.ListItems.Clear
For i = 0 To 10
If Index = i Then
With Shape1(Index)
.BackStyle = 1
TNL(i).ForeColor = vbWhite
TABLENO = Index + 1 Call
connect rs1.Close
TOTAL_AMOUNT = 0
Set l = ORDERVIEW.ListItems.Add(, , rs1.Fields(2)) l.SubItems(1) =
rs1.Fields(4)
l.SubItems(3) = l.SubItems(1) * l.SubItems(2)
TOTAL_AMOUNT = TOTAL_AMOUNT + l.SubItems(3)

Page | 55
rs1.MoveNext
Next
End With
End If Next
TOTALAMOUNTL.Caption = "Total Amount : " & TOTAL_AMOUNT rs1.Close End
Sub
Membership Card
Public GETNAME, GETPHONE, GETDISCOUNT As Variant
Dim CARD_NUMBER, CHECK, GET_M_NO, COUNTER As Variant
Private Sub Check1_Click()
NAMETEXT = ""
PHONETEXT = ""
MEMBERSHIPNOTEXT = ""
MSGLABEL.Visible = False

Page | 56
If Check1.Value = 1 Then
CHECK = 1
Check2.Value = 0
Check3.Value = 0
MEMBERSHIPNOLABEL.Visible = True
MEMBERSHIPNOTEXT.Visible = True
Check2.Top = Me.Height * 0.45
Else
Check2.Top = Me.Height * 0.3
MEMBERSHIPNOLABEL.Visible = False
MEMBERSHIPNOTEXT.Visible = False
End If
End Sub
NAMETEXT = ""
PHONETEXT = ""
CHECK = 2
Check1.Value = 0
Check3.Value = 0
With NAMELABEL
End With
With NAMETEXT
End With

Page | 57
With PHONELABEL
End With
With PHONETEXT
End With
NAMELABEL.Visible = True
NAMETEXT.Visible = True
PHONELABEL.Visible = True
PHONETEXT.Visible = True
Else
NAMELABEL.Visible = False
NAMETEXT.Visible = False
PHONELABEL.Visible = False
PHONETEXT.Visible = False
End If
End Sub
NAMETEXT = ""
PHONETEXT = ""
Check3.Tag = 3
Check1.Value = 0
Check2.Value = 0
NEXTBTN.Visible = False
Shape2.Visible = False
With NAMELABEL

Page | 58
End With
With NAMETEXT
End With
With PHONELABEL
End With
With PHONETEXT
End With
Card.Visible = True
CREATECARD.Visible = True
Shape3.Visible = True
Call connect
If MS.RecordCount = 0 Then
CARDNUMBER.Caption = "1001"
VALIDDATE.Caption = Month(Date) + 2 & "/" & Mid(Year(Date), 3, 2)
Else
While Not MS.EOF
CARD_NUMBER = MS.Fields(0)
MS.MoveNext

Page | 59
Wend
CARDNUMBER.Caption = CARD_NUMBER + 1
VALIDDATE.Caption = Month(Date) + 2 & "/" & Mid(Year(Date), 3, 2) End If
Else
NEXTBTN.Visible = True
NAMELABEL.Visible = False
PHONELABEL.Visible = False
Card.Visible = False
CREATECARD.Visible = False
End If
End Sub
End Sub
End Sub
Private Sub CREATECARD_Click()
If NAMETEXT = "" Or PHONETEXT = "" Then
With MSGLABEL .Visible = True
.Caption = "Err 10: Enter name and phone"
End With
Else

Page | 60
CNAME.Caption = UCase(NAMETEXT)
Call connect
With MS
.AddNew
.Fields(0) = CARDNUMBER.Caption
.Fields(1) = NAMETEXT
.Fields(2) = PHONETEXT
.Fields(3) = Date
.Fields(4) = Month(Date) + 2 & "/" & Day(Date) & "/" & Year(Date)
.Update
End With
CHECK = 3
GETNAME = NAMETEXT
GETPHONE = PHONETEXT
GETDISCOUNT = 0.05
End If
End Sub
Private Sub EDITBTN_Click()
If EDITBTN.Caption = "Update" And Check1.Value = 1 Or Check3.Value = 1 Then
Call connect
MS.Close
MS.Open "update membershipcard set name='" & NAMETEXT.Text & "' where phone='" & PHONETEXT &
"'"
ElseIf EDITBTN.Caption = "Update" And Check2.Value = 1 Then
Call connect
CUS.Close

Page | 61
CUS.Open "update customer set name='" & NAMETEXT.Text & "' where phone='" &
PHONETEXT & "'"
End If
End Sub
End Sub
Unload Me
VIEWORDERFORM.Show
End Sub
EDITBTN.Visible = False
With Me
'.BackColor = RGB(178, 150, 150)
End With
With BACK
.Width = Me.Width
.Height = Me.Height
.Left = 0 .Top = 0
'.BackColor = RGB(178, 150, 150)
End With
With Check1

Page | 62
.Caption = "Membership Card"
'.BackColor = RGB(47, 150, 248)
End With
With Check3
.Caption = "Create Membership Card"
'.BackColor = RGB(47, 150, 248)
End With
With MEMBERSHIPNOLABEL .Width = Me.Width
* 0.3
.Caption = "Enter Number"
.Visible = False
End With
With MEMBERSHIPNOTEXT
.Visible = False
End With

Page | 63
With Check2
.Caption = "Customer"
'.BackColor = RGB(47, 150, 248)
End With
With PHONELABEL
.Caption = "Enter Mobile No"
.Visible = False
End With
With PHONETEXT
.Visible = False
End With
With NAMELABEL .Width = Me.Width *
0.3
.Caption = "Enter Name"
.Visible = False End With
With NAMETEXT .Width = Me.Width *
0.4
.Visible = False
End With

Page | 64
With Card
.Visible = False
End With
With Image2
.Width = Card.Width
.Height = Card.Height
.Left = 0 .Top = 0
.Stretch = True
.Picture = LoadPicture(".datacard1.jpg")
End With
With CARDNAME
.Width = Card.Width * 0.9
.Height = Card.Height * 0.2
.Left = Card.Width * 0.05
.Top = Card.Height * 0.075
.BackStyle = 0
'.LoadAnimatedGIF_File (".datacardname.gif")
End With
With MEMBERSHIP
.BackStyle = 0
'.LoadAnimatedGIF_File (".datacardname.gif")

Page | 65
End With
With CARDNUMBER
.BackStyle = 0
End With
With VALIDLABEL(0)
.BackStyle = 0
End With
With VALIDLABEL(1)
.BackStyle = 0
End With
With VALIDDATE
.BackStyle = 0
End With

Page | 66
With CNAME .Width = Card.Width * 0.9
.BackStyle = 0
End With
End Sub
MsgBox "M"
ElseIf Check2.Value = 1 Then
MsgBox "C"
MsgBox "M"
Else
MsgBox "SELECT"
End If
End Sub
End Sub
Private Sub MEMBERSHIPNOTEXT_Change()
If Len(MEMBERSHIPNOTEXT) = 4 Then
Call connect
MS.Close
MS.Open "select * from membershipcard where m_no='" & MEMBERSHIPNOTEXT & "'"

Page | 67
'MsgBox MS.RecordCount
EDITBTN.Visible = True
NAMETEXT = MS.Fields(1)
PHONETEXT = MS.Fields(2)
With NAMELABEL
.Caption = "YOUR NAME"
End With
With NAMETEXT
End With
With PHONELABEL
.Caption = "YOUR MOBILE NUMBER"
End With
With PHONETEXT
End With
End If
Else

Page | 68
With NAMELABEL .Visible = False
.Caption = "Enter Name "
End With
With PHONELABEL .Visible = False
.Caption = "Enter Phone Number"
End With
End If
End Sub
Private Sub MEMBERSHIPNOTEXT_GotFocus()
End Sub
Private Sub NAMETEXT_GotFocus()
End Sub
Private Sub NEXTBTN_Click()
If CHECK = 1 Then
If MEMBERSHIPNOTEXT = "" Then
With MSGLABEL
.Caption = "Enter Membership Number"
.Visible = True
End With
Else
Call connect
MS.Close
MS.Open "select * from membershipcard where m_no='" & MEMBERSHIPNOTEXT
& "'"

Page | 69
GETNAME = MS.Fields(1)
GETPHONE = MS.Fields(2)
GETDISCOUNT = 0.1
BILLFORM.Show
Else
With MSGLABEL
.Visible = True
.Caption = "Membership Number is Wrong"
End With
End If
End If
ElseIf CHECK = 2 Then
If NAMETEXT = "" Or PHONETEXT = "" Then
With MSGLABEL .Visible = True
.Caption = "Err 10: Enter name and phone"
End With
ElseIf COUNTER = 0 Then
Call connect
With CUS
.AddNew
.Fields(1) = PHONETEXT
.Update
End With
GETNAME = NAMETEXT
GETDISCOUNT = 0
BILLFORM.Show
Else

Page | 70
GETNAME = NAMETEXT
GETDISCOUNT = 0
BILLFORM.Show
End If
ElseIf CHECK = 3 Then
BILLFORM.Show
GETNAME = NAMETEXT
GETDISCOUNT = 0.1
BILLFORM.Show
End If
End Sub
Private Sub PHONETEXT_Change()
If Len(PHONETEXT) = 10 And Check2.Value = 1 Then
Call connect
CUS.Close
CUS.Open "select * from customer where phone='" & PHONETEXT & "'"
'MsgBox CUS.RecordCount
If CUS.RecordCount = 1 Then
COUNTER = 1
NAMETEXT.Text = CUS.Fields(0)
EDITBTN.Caption = "Update"
Else
COUNTER = 0
End If

Page | 71
ElseIf Len(PHONETEXT) = 10 And Check3.Value = 1 Then
Call connect
MS.Close
MS.Open "select * from membershipcard where phone='" & PHONETEXT & "'"
'MsgBox MS.RecordCount
GET_M_NO = MS.Fields(0)
NAMETEXT.Text = MS.Fields(1)
Else
End If
ElseIf Len(PHONETEXT) = 10 And Check1.Value = 1 Then
Call connect
MS.Close
MS.Open "select * from membershipcard where phone='" & PHONETEXT & "'" 'MsgBox MS.RecordCount
GET_M_NO = MS.Fields(0)
NAMETEXT.Text = MS.Fields(1)

Page | 72
Else
End If
Else
EDITBTN.Caption = "Edit"
NAMETEXT.Text = ""
End If
End Sub
Private Sub PHONETEXT_GotFocus()
End Sub

Page | 73
Invoice
Dim BILL_NUMBER, TOTAL_AMOUNT, TOTAL_QTY As Variant
Dim l As ListItem
Private Sub Combo1_Change()
If Combo1.Text = "Cash" Then
Command1.Caption = "Pay"
Else
Command1.Caption = "Next"
End If
End Sub
Private Sub Combo1_Click()
Command1.Caption = "Pay"
Else

Page | 74
Command1.Caption = "Next"
End If
End Sub
If Command1.Caption = "Pay" Then
Call Billinsert
End If
ElseIf Combo1.Text = "Credit Card" Then creditfrm.Show
ElseIf Combo1.Text = "Debit Card" Then debitfrm.Show
ElseIf Combo1.Text = "UPI" Then
UPI.Show
ElseIf Combo1.Text = "Paytm" Then
PAYTM.Show
End If
End Sub
Sub Billinsert()
Call connect
With B_L
.AddNew
.Fields(0) = BILLNO
.Fields(1) = DATETEXT
.Fields(3) = MOBILETEXT
.Fields(4) = FTOTALITEM(1).Caption
.Fields(5) = FTOTALQTY(1).Caption .Fields(6) =
FSUBTOTAL(1).Caption .Fields(7) =
Round(Val(FCGSTTAX(1).Caption))
.Fields(8) = Round(Val(FSGSTTAX(1).Caption))
.Fields(9) = Round((Val(FCGSTTAX(1).Caption) + Val(FSGSTTAX(1).Caption)))
.Fields(10) = Round(Val(FAFTERTAX(1).Caption))

Page | 75
.Fields(11) = Round(Val(FDISCOUNT(1).Caption))
.Fields(12) = Round(FGRANDTOTAL(1).Caption)
.Fields(13) = Combo1.Text
.Fields(14) = Time
.Fields(15) = Day(DATETEXT)
.Fields(16) = Month(DATETEXT)
.Fields(17) = Year(DATETEXT)
.Update
End With
For i = 1 To LV.ListItems.Count
With B_D
.AddNew
.Fields(0) = BILLNO
.Fields(1) = LV.ListItems(i).SubItems(1)
.Update
End With Call connect
rs1.Close
rs1.Open "delete * from tablenumber where t_no='" &
VIEWORDERFORM.TABLENUMBER & "'"
DONEFORM.Show
Next
End Sub
Call BILLING
End Sub

Page | 76
End With
With DATETEXT
End With
With NAMED
End With
With NAMETEXT .Width = Me.Width *
0.2
End With
With MOBILE
End With
With MOBILETEXT

Page | 77
End With
With SNO
End With
With ID
End With
With INAME
End With
With QTY
End With
With PRICE
.Width = Me.Width * 0.084 .Height = Me.Height * 0.05
End With

Page | 78
With AMOUNT
End With
With LV
.ColumnHeaders(1).Width = LV.Width * 0.05
End With
With FRAME
End With
With BILLDETAILSHAPE
End With

Page | 79
'BILL_NUMBER = B_L.Fields(0)
'MsgBox BILL_NUMBER
'MsgBox B_L.RecordCount
'For i = 1 To B_L.RecordCount
' BILL_NUMBER = B_L.Fields(0)
' B_L.MoveNext
'Next
' MsgBox BILL_NUMBER & " " & B_L.Fields(0).Value
BILLNO.Text = BILL_NUMBER + 1
End If
TOTAL_AMOUNT = 0 TOTAL_QTY = 0
rs1.Close
rs1.Open "select * from tablenumber where t_no='" &
VIEWORDERFORM.TABLENUMBER & "' "
If rs1.RecordCount > 0 Then
FTOTALITEM(1).Caption = rs1.RecordCount
For i = 1 To rs1.RecordCount Set l =
LV.ListItems.Add(, , i) l.SubItems(1) =
rs1.Fields(1)
TOTAL_QTY = TOTAL_QTY + l.SubItems(3) l.SubItems(4) =
rs1.Fields(3)
l.SubItems(5) = l.SubItems(3) * l.SubItems(4)
TOTAL_AMOUNT = TOTAL_AMOUNT + l.SubItems(5) rs1.MoveNext
Next
FTOTALQTY(1).Caption = TOTAL_QTY
FSUBTOTAL(1).Caption = TOTAL_AMOUNT
FCGSTTAX(1).Caption = Round(TOTAL_AMOUNT * 0.025, 2)
FSGSTTAX(1).Caption = Round(TOTAL_AMOUNT * 0.025, 2)
FAFTERTAX(1).Caption = Round(TOTAL_AMOUNT + TOTAL_AMOUNT * 0.025 +
TOTAL_AMOUNT * 0.025, 2)

Page | 80
FDISCOUNT(1).Caption = Round(Val(FAFTERTAX(1).Caption) *
MEMBERSHIPFORM.GETDISCOUNT, 2)
FROUNDOFF(1).Caption = Round(Val(FAFTERTAX(1).Caption) -
Val(FDISCOUNT(1).Caption))
FGRANDTOTAL(1).Caption = FROUNDOFF(1).Caption
End If
End Sub
Private Sub Form_Unload(CANCEL As Integer)
Unload creditfrm
Unload debitfrm
Unload PAYTM
Unload UPI
Unload UPIPASS
End Sub
Payment Using UPI

Page | 81
Private Sub CANCEL_Click()
Unload UPI
End Sub
If UPITEXT.Text = "" Then
ERRORMSG.Caption = "Enter UPI"
ElseIf UPITEXT.Text = "rahul@paytm" Then
'UPI.Hide
UPIPASS.Show
Else
ERRORMSG.Caption = "Enter Valid UPI"
End If
End Sub
Me.DrawWidth = 2
Me.Line (20, 20)-(Me.Width - 20, Me.Height - 20), vbCyan, B
Me.Line (40, 40)-(Me.Width - 40, Me.Height - 40), vbBlack, B
Me.Line (40, Me.Height * 0.17)-(Me.Width - 40, Me.Height * 0.17), vbBlack
End Sub
Me.Top = Screen.Height * 35 / 100
Me.Left = Screen.Width * 35 / 100
Me.Width = Screen.Width * 25 / 100
Me.Height = Screen.Height * 30 / 100
Me.BackColor = vbWhite
With CANCEL
.Top = 40

Page | 82
.Width = 600
.Height = 400
.Caption = "X"
.Font.Name = "Century Gothic"
.Font.Size = 16
End With
With AMOUNT
.Caption = " AMOUNT TO BE PAY : " & BILLFORM.FGRANDTOTAL(1)
.Alignment = 0
.BackStyle = 0
.Font.Size = 12
.Font.Name = "rockwell"
End With
With UPIIMAGE
.Picture = LoadPicture("E:ID PROJECTPROJECTBank imageUPIFORM.jpg")
.Top = UPI.Height * 0.15
.Width = UPI.Width * 0.6
.Height = UPI.Width * 0.2
.Left = UPI.Width * 0.2
End With
With UPILABEL .BackStyle = 0
.Caption = "ENTER UPI ID"
.Font.Size = 15

Page | 83
.Width = UPI.Width
.Left = 0
End With
With ERRORMSG .Caption =
""
.BackStyle = 0
.Font.Size = 12
.Alignment = 2
.ForeColor = vbRed
End With
With UPITEXT .FontSize = 15
.Font.Name = rockwell
End With
With Command1 .Top = UPI.Height * 0.78
.Caption = "Make Payment"
.Font.Size = 15

Page | 84
End With
End Sub
Private Sub UPITEXT_Change()
ERRORMSG.Caption = ""
End Sub

Page | 85
UPI Password
Dim c, cli As Integer
End Sub
Private Sub DELETE_Click()
WRONGINPUT.Caption = ""
'MsgBox c
If c = 1 Then
PIN1.Text = ""
End If
If c = 2 Then
PIN2.Text = ""
End If

Page | 86
If c = 3 Then
PIN3.Text = ""
End If
If c = 4 Then
PIN4.Text = ""
End If
If c >= 1 Then c = c - 1 End If
End Sub
Private Sub DELETE_MouseDown(Button As Integer, Shift As Integer, X As Single, Y As Single)
DELETE.Picture = LoadPicture("E:ID
PROJECTPROJECTNUMBERCOLORGREENdelete.jpg")
End Sub
Private Sub DELETE_MouseUp(Button As Integer, Shift As Integer, X As Single, Y As Single)
DELETE.Picture = LoadPicture("E:ID PROJECTPROJECTNUMBERNUMBERdelete.jpg") End Sub
Me.DrawWidth = 1
Me.Line (5, 5)-(Me.Width - 10, Me.Height - 10), vbGreen, B
End Sub
With Me
End With
.FontSize = 17

Page | 87
End With
With PIN3
.MaxLength = 1
.Alignment = 2
.FontSize = 17
End With
With PIN4
.MaxLength = 1
.Alignment = 2
.FontSize = 17
End With
With WRONGINPUT
.Caption = ""
.BackStyle = 0
.Alignment = 2
.FontSize = 13

Page | 88
End With
For i = 0 To 9
With Image2(i)
.Stretch = True
.BorderStyle = 0
End With
Next
l = 0.21
For i = 0 To 2
With Image2(i)
.Left = Me.Width * l
.Tag = i + 1 End With l = l
+ 0.22
Next
l = 0.21 For i = 3 To 5
With Image2(i)
.Tag = i + 1 End With l = l
+ 0.22 Next
l = 0.21 For i = 6 To 8
With Image2(i)

Page | 89
.Tag = i + 1
End With
l = l + 0.22
Next
With SHOWPASS
.Picture = LoadPicture("E:ID
PROJECTPROJECTNUMBERNUMBERHIDEPASSWORD.jpg")
.BorderStyle = 0
End With
With Image2(9)
.Tag = 0 End With
For i = 0 To 9
Image2(i).Picture = LoadPicture("E:ID PROJECTPROJECTNUMBERNUMBER" &
Image2(i).Tag & ".jpg")
Next

Page | 90
With DELETE
.Picture = LoadPicture("E:ID PROJECTPROJECTNUMBERNUMBERdelete.jpg") .Top = Me.Height *
0.74
.BorderStyle = 0
End With
With PROCEED
.Top = UPIPASS.Height * 0.87
.Width = UPIPASS.Width * 0.4
.Left = UPIPASS.Width * 0.3
.Caption = "Proceed"
.Font.Size = 15
End With
cli = 0 c = 0 End Sub
Private Sub Image2_Click(Index As Integer)
WRONGINPUT.Caption = ""
If c <= 3 Then c = c + 1 End If
'MsgBox c
If c = 1 Then
PIN1.Text = Image2(Index).Tag
End If
If c = 2 Then

Page | 91
End If
If c = 3 Then
End If
If c = 4 Then
PIN4.Text = Image2(Index).Tag 'WRONGINPUT.Caption = PIN1 & PIN2 & PIN3 & PIN4
End If
End Sub
Private Sub Image2_MouseDown(Index As Integer, Button As Integer, Shift As Integer, X
As Single, Y As Single)
Image2(Index).BorderStyle = 1
Image2(Index).Picture = LoadPicture("E:ID
PROJECTPROJECTNUMBERCOLORGREEN" & Image2(Index).Tag & ".jpg")
End Sub
Private Sub Image2_MouseUp(Index As Integer, Button As Integer, Shift As Integer, X As
Single, Y As Single)
Image2(Index).BorderStyle = 0
Image2(Index).Picture = LoadPicture("E:ID PROJECTPROJECTNUMBERNUMBER" &
Image2(Index).Tag & ".jpg")
End Sub
Unload UPIPASS
End Sub
Private Sub PROCEED_Click()
If PIN1 <> "" And PIN2 <> "" And PIN3 <> "" And PIN4 <> "" Then
'MsgBox "a"

Page | 92
End If
If PIN1 = "1" And PIN2 = "2" And PIN3 = "4" And PIN4 = "5" Then
BILLFORM.Billinsert
With WRONGINPUT
.Caption = "PIN MATCHED" .ForeColor = RGB(0,
255, 0)
End With
Me.Hide
UPI.Hide
'MsgBox "done"
Else
With WRONGINPUT
.Caption = "WRONG INPUT"
.ForeColor = RGB(255, 0, 0)
End With
End If
End Sub
Private Sub SHOWPASS_Click()
cli = cli + 1
If cli = 1 Then
PIN1.PasswordChar = ""
SHOWPASS.Picture = LoadPicture("E:ID
PROJECTPROJECTNUMBERNUMBERSHOWPASSWORD.jpg")
End If
If cli = 2 Then
PIN1.PasswordChar = "*"

Page | 93
cli = 0
SHOWPASS.Picture = LoadPicture("E:ID
PROJECTPROJECTNUMBERNUMBERHIDEPASSWORD.jpg")
End If
End Sub
Payment Using Credit Card
Unload creditfrm
End Sub
Me.DrawWidth = 2

Page | 94
End Sub
If Len(CARDTEXT.Text) = 16 And MONTHBOX <> " " And YEARBOX <> " " And PINTEXT <>
"" Then otpfrm.Show otpgen.Show
creditfrm.Enabled = False
Else
MsgBox "PLEASE FILL CORRECT", , "INFORMATION"
End If
End Sub
With AMOUNT
.Caption = " AMOUNT TO BE PAY : " & BILLFORM.FGRANDTOTAL(1)
.Alignment = 0
.BackStyle = 0
.Font.Size = 14
End With

Page | 95
With CANCEL
.Top = 40
.Width = 600
.Height = 400
.Caption = "X"
.Font.Name = "Century Gothic"
.Font.Size = 16
End With
With debit
.Caption = "Crebit Card"
.Font.Size = 25
.Alignment = 2
.FontBold = True
.Width = Me.Width .Left = 0
End With
With CARDNO
.Font.Size = 18
.Width = Me.Width
.Alignment = 2
.Caption = "Crebit Card Number*"
.Left = 0

Page | 96
End With
With CARDTEXT
.Font.Size = 16
'.Height = Me.Height * 0.04
End With
With MONTHLABEL .Caption = "
Month *"
.Alignment = 0
.Font.Size = 14
End With
With YEARLABEL .Caption = " Year *"
.Alignment = 0
.Font.Size = 14
End With With MONTHBOX
.Text = " "
.Font.Size = 12

Page | 97
End With
For i = 1 To 12
MONTHBOX.additem i
Next
With YEARBOX
.Text = " "
.Font.Size = 12
End With
For i = 2018 To 2030
YEARBOX.additem i
Next
With PINLABEL
.Caption = "PIN *"
.Alignment = 0
.Font.Size = 15
End With

Page | 98
With PINTEXT
.FontBold = True
.Font.Size = 14
End With
With PROCEEDSHAPE
.Width = Me.Height * 0.35
.BorderWidth = 2
.BorderColor = vbRed
End With
With PROCEED
.Caption = "PROCEED"
.Font.Size = 12
.FontBold = True
.BackStyle = 0
.Alignment = 2
End With

Page | 99
End Sub
Enter OTP
Dim a, h As Integer
Dim c As Integer
Me.DrawWidth = 1
Me.Line (8, 8)-(Me.Width - 30, Me.Height - 30), vbBlue, B
Timer1.Enabled = True
End Sub
Private Sub Form_Load() c = 0
Me.Refresh
With Me

Page | 100
.Top = Screen.Height
End With
With Label1
.Left = 0
.Caption = "Your OTP is"
.Alignment = 2
.Font.Size = 20
.BackStyle = 0
End With
With OTP .BackStyle = 0
.Left = otpgen.Width * 0.6
.ForeColor = RGB(0, 255, 255)
.Font.Size = 20
.BackColor = vbWhite a = Format(Rnd * 10000 + 2,
"00000")
.Caption = a
End With h = Screen.Height
End Sub
Private Sub Timer1_Timer() If c < 15 Then c
= c + 1 Me.Top = h h = h - 140 End If

Page | 101
If c = 15 Then
Timer1.Enabled = False
End If
End Sub
Payment Using Debit Card
Unload debitfrm
End Sub
Private Sub CARDTEXT_Change()
With ERRORMSG .Caption = ""
End With
If Len(CARDTEXT) = 3 Or Len(CARDTEXT) = 0 Then

Page | 102
CARDIMG.Picture = LoadPicture("")
End If
If CARDTEXT.Text = "1234" Then
CARDIMG.Picture = LoadPicture(".Datavisa.jpg")
End If
CARDIMG.Picture = LoadPicture(".Datarupay.jpg")
End If
CARDIMG.Picture = LoadPicture(".Datamastercard.jpg")
End If
CARDIMG.Picture = LoadPicture(".dataMaestro.jpg")
End If
End Sub
Private Sub CVPTEXT_Change()
With ERRORMSG
.Caption = ""
End With
End Sub
Me.DrawWidth = 2
End Sub
Private Sub MONTHBOX_Click()

Page | 103
End With
End Sub
Private Sub YEARBOX_Click()
'MsgBox "a"
With ERRORMSG
.Caption = ""
End With
End Sub
If Len(CARDTEXT.Text) = 16 And MONTHBOX <> " " And YEARBOX <> " " And
Len(CVPTEXT.Text) = 3 Then
End With otpfrm.Show otpgen.Show
debitfrm.Enabled = False
Else
With ERRORMSG
.Caption = "PLEASE FILL CORRECT"
.ForeColor = vbRed
End With
End If
End Sub
With CANCEL .Top = 40

Page | 104
With CARDNO
.Font.Size = 18
.Width = debitfrm.Width
.Alignment = 2
.Caption = "Debit Card Number *"
.Left = 0
End With
With CARDTEXT
.Font.Size = 16
.Width = debitfrm.Width * 0.6
.Left = debitfrm.Width * 0.2
.Top = debitfrm.Height * 0.46
End With
With CARDIMG .Stretch = True
.BorderStyle = 0
End With
With MONTHLABEL
.Caption = " Month *"
.Alignment = 0
.Font.Size = 14

Page | 105
End With
With YEARLABEL .Caption = " Year
*"
.Alignment = 0
.Font.Size = 14
.Width = debitfrm.Width * 0.2 .Left = debitfrm.Width
* 0.425
End With
With CVPLABEL .Caption = " CVV
*"
.Alignment = 0
.Font.Size = 14
End With
With MONTHBOX .Text = " "
.Font.Size = 16
End With

Page | 106
For i = 1 To 12
MONTHBOX.additem i
Next
With YEARBOX .Text = " "
.Font.Size = 16
End With
For i = 2018 To 2030
YEARBOX.additem i
Next
With CVPTEXT
.Font.Size = 15
End With
.Alignment = 2
.BackStyle = 0
.Font.Size = 12

Page | 107
End With
With PROCEEDSHAPE .Left = Me.Width
* 0.65
.BorderWidth = 2
.BorderColor = vbRed
End With
With PROCEED
.Caption = "PROCEED"
.Font.Size = 12
.FontBold = True
.BackStyle = 0
.Alignment = 2
End With
End Sub

Page | 108
Enter OPT
Dim a As Variant
Me.DrawWidth = 1
End Sub
With Me
.BackColor = RGB(200, 255, 255)

Page | 109
Payment Using Paytm

Page | 110
With Me
End With
With ucAniGIF1
End With
With Label1
End With
With Label2
.Caption = BILLFORM.FGRANDTOTAL(1)
End With
With Shape1

Page | 111
End With
With Label3
End With
End Sub
End Sub
BILLFORM.Billinsert
'MsgBox "done"
End Sub
Private Sub Label3_MouseMove(Button As Integer, Shift As Integer, X As Single, Y As Single)
End Sub

Page | 113
Chapter – 6 System Requirements of PC
Processor Core 2 Dual / 4.3 more
RAM 1, 2 GB or more
HDD 500 GB / 1 TB or more
OS Window 7 or Later
Database MS Access 2003

Page | 114
Chapter – 7 Conclusion
After we have completed the project we are sure the problems in the existing system world overcome. The
“Restaurant Billing System” process made computerized to reduce human errors & to increase the efficiency.
The main focus of this project is to less human efforts. The maintenance of the records is made efficient, as all
the records are stored in the Access Database, through which data can be retrieved easily. The navigation control
is provided in all the forms to navigate through the large amount of records. If the numbers of records are very
large than user has to just type in the search string & user gets the results immediately. The editing is also made
simples. The user has to just type in the required field & process the update button to update the desired field.
The customers are given a particular unique id no. so that they can be access correctly & without errors. Our main
aim of the project is to get the correct information about a customer visit in the Restaurant.

Page | 115
Bibliography
 www.google.com
 www.youtube.com
 www.stackoverflow.com
 www.slideshare.com
VB Black Book (Author: Steven Holzner)
MS Visual Basic 2010 step by step (Author: Michael Halverson)
The Complete Reference Visual Basic 6 (Author: Noel Jerk) College Notes

Page | 116
Thank You…
Harsh Mathur
Bachelor of Computer Application
106/10, CIVIL LINES
AJMER
RAJASTHAN - 305001 (INDIA)
(JANUARY, 2019)
www.dezyneecole.com

Harsh Mathur Final Year Project Report on Restaurant Billing System

More Related Content

What's hot

Similar to Harsh Mathur Final Year Project Report on Restaurant Billing System

More from Harsh Mathur

Recently uploaded

Harsh Mathur Final Year Project Report on Restaurant Billing System