ERP System Introduction Proposal for Classical Bicycle Manufacturer

Erp Definition
` Proposal for the introduction of an ERP System in Joshua Arkwright & Sons Classical bicycle manufacturer Report Submission Data: 11th May 2010
Reported by: 09BSP046 Enterprise Resource Planning Module Group Assignment Table of Contents Section Page 1. Executive Summary 2. Company
Situation Analysis 2.1 Company background 2.2 Company situation 2.2.1. Financial Condition 2.2.2. Market Condition 2.2.3. System 2.2.4. Human
Recourse 2.3. About SAP R/3 3. Overall project goals 4. Priorities for computerisation 4.1. 4.2. 4.3. 5. Evaluation of commercial feasibility: benefits 6.
Project Plan References At... Show more content on Helpwriting.net ...
It may be because of complex, ineffective flow in communication as a result of un–integrated information system in JAS. : Low performance in
liquidity may be resulted from poor inventory management and ineffective costs control. Firstly, JAS is facing the cash flow problem because of
having too many stocks in warehouse. Secondly, un–integrated information system brings some difficulties in costs control. In–timely and inaccurate
customers' financial data makes JAS difficult to retrieve debtors effectively. 2.2.2 Market The UK Government policies encourage citizens to use
more bicycles instead of other transportations as possible as they can because of the congestion and air pollution. In addition, increasingly number of
people has treated cycling as an exercise, trip and healthy lifestyle, which promotes the consumption of bicycle. These contribute to the boost of
bicycle industry. However, JAS has gained relatively lower market share over the last few years. The level of competitive intensity has a significant
impact on JAS's sales and profit. Firstly, as a medium–sized company providing high–quality bicycles, JAS has been receiving increasing competition
from its existing rivals who offer similar products but relatively lower price because of their economies of scale. Some rivals benefit from their high
production or lower cost of material and labour, leading to competitive advantage in the marketplace, such as high quality with the relatively lower
... Get more on HelpWriting.net ...

Integrated Curriculum Paper
The objective 1(c)1.(i) was met in this course by the Inquiry and Integrated research papers that were written. The Inquiry paper assisted in meeting
this objective by addressing specific theories that helped aid in proof about inquiry teaching. The inquiry paper also assisted in meeting this objective
because it discussed different tools of inquiry that researchers discovered teachers would benefit from using inside of the classroom. The Integrated
research paper assisted in meeting objective 1(c)1.(i) by discussing how academic disciplines can be connected through a specific lesson. Integrated
curriculum was discussed in depth in the research paper and talked about the importance of facts and central concept principles.
The objective 1(c)1.(ii) was met in this course by the Biography Study. The Biography study assisted in... Show more content on Helpwriting.net ...
The integrated curriculum discusses in depth how to use the Five E lesson plan format. The Five E lesson plan format is used by Alabama teachers.
Alabama teachers also develop learning objectives based on the Alabama course of study. The integrated curriculum paper discusses the needs, interests,
and abilities of students when teachers use the integrated curriculum in the classroom.
The objective 2(c)2.(ii) was met in this course by completing the Science Investigation Project. The Science Investigation project assisted in meeting
this objective by showing strategies that promoted retention for viewers. The investigation had to include step by step procedures that included pictures
of the steps. The pictures and procedures were able to promote retention of how to conduct the investigation. The Science investigation also transferred
learning and the relationship between the two learning outcomes. The investigation did not have answers to it. The conducted investigation had to
included data gathering and final result

Integrated Delivery System Analysis
IDS: Integrated delivery system is defined as the network of healthcare organization under the parent organization or company which drives/operates
this service business. The purpose of IDS is to facilitate the health related services through the health network for the people health care. The IDS
contains either the network of hospitals and physicians or the network of only physicians sometime they contain the HMO component as well. The
purpose of the IDS is to reduce the cost of health care and improves the quality of healthcare services. The basic forms of integrated delivery system
is to provide the health care services to patients in such a way that people gets benefited from the services in better , cheaper and faster ways, so that
people

Project Management Body Of Knowledge Framework
1.Project Management
1.1 Research PRINCE 2
PRINCE 2, which stands for Projects IN Controlled Environments, is a process–based methodology for effective project management. As stated on the
website using the PRINCE 2 methodology a project "focuses on business justification, a defined organisation structure for the project team, product
based planning approach, emphasis on dividing the project in the manageable to controllable stages and flexibility that can be applied at a level
appropriate for the project (ILX Group, 2016)."
Agile
The Agile methodology is an alternative type of project management, typically used in software development. It helps project teams respond to change
and work iteratively. Throughout a project using the Agile... Show more content on Helpwriting.net ...
3.Executing: Implementing the work through labour, materials and resources.
4.Monitor & Controlling: Progress status tracking, monitoring against the original plan and taking remedial actions wherever necessary to keep the
project on track.
5.Closing: Formal acceptance of the product and documentation by client and stakeholders, formalising any warranty, service or client handovers,
documentation and summary of lessons learnt throughout the life of the project.
The five process groups are integrated with each other and overlap and interact throughout a project (Willis, 2013)."
The frame work is used to provide a set of guidelines and processes that are drawn from experience in many different sectors and industries. It is
generic and can be applied to all types of projects. It provides a standard structure and format that can be integrated with the company's processes
(Willis, 2013).
1.2 Investigate
The Information Management and Technology Group (IMTG) within Department of Social Services (DSS) uses a delivery framework based on the
Software Development Lifecycle, to support technical product delivery with the expectation that PRINCE 2 is overlaid to ensure the project is suitable
managed. This framework supports both Waterfall and AgileSystems Development Life Cycle (Department of Social Services, n.d.) . The components
that are based on PRINCE 2 are the

Project Management : Development Appraisal And Economics
BSC (HONS.) IN CONSTRUCTION PROJECT MANAGEMENT Construction Procurement Advisement SMRC Corporation, New Research Facility,
Sligo Ireland G2 Consultants G.J. GERARD S00135023 12/1/2014 Module: Development Appraisal and Economics Lecturer: Leigh McLoughlin The
purpose of this report is to summarize and analyze the various construction procurement methods used in the construction industry. This report was
commissioned by SMRC medical research corporation. This report will identify a recommended method to the commissioner for the development of
their new research facility. Table of Contents 1.0 INTRODUCTION:2 1.1 Project Brief:2 2.0 PROCUREMENT SUMMARY AND ANALYSIS:3 2.1
Procurement Methods versus Project Cost3 2.2 Procurement Methods4 2.2.1 Traditional or Design–BID–Build4 2.2.2 Design and Build5 2.2.3
Management Contracting / Construction Management.6 2.2.4 Public – Private Partnership (PPP)7 2.2.5 Private Finance Initiative (PFI)8 2.2.6
Framework Contracting9 2.3 Integrated Project Delivery (IPD) in construction procurement.9 3.0 SUMMARY CONCLUSIONS and
ASSUMPTIONS10 Item 3.1 – Ownership.11 Item 3.2 and 3.6 – Budget and Financing11 Item 3.3 and 3.4 – Quality of Design – Innovation11 Item 1.5
– Time Frame – Development Schedule11 4.0 PROCUREMENT RECOMMENDATION AND RATIONALE11 REFERENCES13 1.0
INTRODUCTION: G2 Consultants (GJ Gerard) were retained by the Sligo Medical Research Corporation (SMRC) to execute a detailed

Interim Ip Assignment
The interim Infection Preventionist (IPP) is a leader in the Infection Control and epidemiology field. The Interim IP utilizes both expert knowledge and
critical thinking skills to improve patient safety in a temporary assignment. Each assignment brings new and additional rewarding challenges. The
Interim IP works in variety of assignments including providing Infection Prevention Services during interim periods, outbreak investigation, onsite
education and training, crisis intervention, survey preparedness, surveillance and NHSN auditing in both inpatient and outpatient healthcare settings.
Each assignment is different and offers a new set of challenges and rewards. This is what attracted me to work as an Interim IP. I also prefer the
autonomy of working as an Interim IP. The flexibility to accept when and where you are going to work allows you to take control of your life. With the
ability to select assignments, you can take time off at your discretion and the tensile lifestyle allows more time with family and friends. The freshness
and variety of assignments keeps the passion for Infection Prevention alive. You are an independent consultant under contract with APIC Consultant.
Furthermore, the financial compensation is usually greater for the Interim IP than the salary of a traditional IP; thus, you can work fewer hours for the
same amount... Show more content on Helpwriting.net ...
They had a massive water leak with standing brown water in the basement of the hospital where the kitchen, sterile processing, central supply,
outpatient therapy, and morgue were located. They were desperate. So I threw new clothes in my suitcase, drove the four hours back to the hospital.
On my arrival they were desperately trying to pump the water out of the basement, and they had no idea what infection control measure to undertake.
Obviously they were very grateful that I returned back to the

Design-Build Project Delivery Method
Running Head: DESIGN–BUILD PROJECT DELIVERY METHOD
Civil Engineering: Design–Build Project Delivery Method
Design–Build Project Delivery Method Due to the economic specialization, a new method named The Design Build Project Delivery Method has been
developed. This method is found as the best alternative for delivering the public projects (Design–Build E ffectiveness Study, 2006). As per the
position of the design professional, the design build project delivery methods are suitable for the delivery of the projects. The use of this method has
become widespread in the recent times. Due to this much of application of this method, the need of the project designers is much to be involved in the
development of the projects to ensure ... Show more content on Helpwriting.net ...
в–Є Any kind of improper practices by the professionals is prohibited. в–Є The hiring of a contractor is done by conducting bidding for the completion
of the project on a set price. в–Є The hiring of the contractor does not include any kind of competitive bidding due to which, special legislations are
essential to be considered in the hiring process (Understanding Project Delivery for the Design and Construction of Public Buildings). This way,
several issues arise during the process of hiring or contracting the design professional in the given economic landscape. These issues include ethical,
financial, legal and some general as per the above discussion. According to the personal observation, the effective coordination with all these issues is
essential for an individual to have the delivery of the project on the required beneficial level.
Impact on Individual Hiring a design professional, impact the individuals from two sides positive, as well as, the negative. From the positive
perspective, all the interests of the individual or owner are protected with the assistance of the responsibilities taken by the design professional. The
quality building aspects and the other functions related to construction works are also addressed by the hiring of the design professional by the owner.
In addition to this, the time and cost of the owner are also saved by this contract between both the parties. The delivery of the

Components Of Integrated Project Delivery
What is Integrated Project Design?
There are many different business structures in place which businesses around the world are using today. One of these business structures, used in the
design and construction industry, is called Integrated Project Delivery. Integrated Project Delivery is a business style which incorporates all aspects of
design throughout the entire design process. This includes, but is not limited to, all participants, business coordination's, and business systems, and the
way they interact with the specialties of the participants, in turn producing fluidity within the design and a highly effective final product. The main
players within IPD are owners, architect, contractors, designers, sub–contractors, consultants and suppliers.
Collaboration is key within Integrated Project Delivery (4). In order to create this type of building structure all parties involved must be willing to
collaborate. When this happens the result creates an open, shared business model where no information is hidden or lost in communication. This
lessens the instance of becoming fragmented and disconnected. Early involvement of all participants from owner to supplier produces a mutual
understanding of the goal and outcome of the design and leaves everyone with an equal understanding of the project. At this point in IPD mutual trust
can be gained as well as mutual benefit while understanding everyone's role in the process. Team building is another major part of IPD. Under each
main

The American Institute Of Architects
What is IPD (Integrated Project Delivery) as it applies to construction? Generally speaking here is how it works: IPD is a process where a team of
everyone involved in the project gets together and create a plan then continue to be involved to see it through completion. The team is bound together
by contract legally and stands to gain or lose financially as a whole by the outcome of the project. The American Institute of Architects (AIA) currently
defines IPD as "a project delivery method that integrates people, systems, business structures and practices into a process that collaboratively harnesses
the talents and insights of all participants to reduce waste and optimize efficiency through all phases of design, fabrication and ... Show more content on
Helpwriting.net ...
These goals may vary, but are usually associated with cost, schedule and quality metrics commonly used to measure project success. Over time,
businesses are adopting the integrated project delivery and project partnering in place of traditional delivery methods. IPD works in a way such so
that team members integrate with each other. IPD is an effective tool because it involves all team members who work collaboratively to ensure the
success of the project. For this project delivery organization to succeed, members of the team must commit to a true partnership. IPD demands a higher
level of trust and engagement of not only the conception and construction team members, but also from the client, owner, and end users. IPD also
fosters collaboration such that schedules are not only planned, but also developed by all the members involved as well.
The difference between traditional and integrated project delivery is significant. For instance during traditional project delivery the conception and
planning stages would include a limited team such as the engineers and architects. The plans would then be passed to the construction team and from
there after groundbreaking the construction team takes over. With integrated project delivery the construction team would be present during planning
and the designers and engineers would be present during construction phase. Initially, the

Risks Facing The Construction Industry
"Risk is defined as exposure to loss/gain or the probability of occurrence of loss/gain multiplied by its respective magnitude" (3). "Risk management
is a systematic approach of dealing with different types of risks at any stage of the project" (7). There are a number of risks occurring from the
beginning of the project to the end so risk management plays a vital role throughout the project. This article is a review on the different types of risks
faced in the construction industry and whether the various solutions adopted for it are enough.
Risks can be neglected by construction firms at certain times in the construction industry which can cause other issues like finance, design failure,
accidents and many more. There are a number of articles which talk about the various types of risks in construction, some of the basic risks we come
across in most of the projects would be risk of procurement, defective design, funding problem, accidents /safety, temporary structures and risk of
unforeseen events etc.
One of the risks we come across first in the beginning a project is risk of procurement. The few types of procurement options studied are in terms of
project delivery, form of payment and use of collaboration. The method used in the article was a general condition and led to conflicts and an
increase in cost, thus this risk allocation was not enough so by opting for a collaborative method the problem was resolved (2). They could have
improved on the risk management by

The Project Of Cathedral Hill Hospital With Lean Culture
Figure 11. The Project of Cathedral Hill Hospital with Lean Culture Other Lean techniques that the researcher obtained through analyzing collected data
are "customer–supplier" standpoints and the Plan Do Study Act (PDSA) approach. Fundamentally projects utilized Lean principles will pay more
attention on the demands of customers to supply exactly what they need and require; therefore, this technique significantly reduce needlessly waste of
the project. Likewise, PDSA is mentioned in the continuous improvement of the project life cycle with the following definitions of each factor: Plan:
Adjustments or innovations in consideration of achieving the project improvement. Do: Execution of necessary changes and modifications. Study:
Outcomes of the changes. What are needed to improve? What are required to eliminate? Act: Acceptances or declines of changes. Owner participation
in LIB. The responsibility of owners unquestionably affects the project performance and objectives, particularly in LIB–cooperating ones as a result of
IPD and Lean characteristics that need to be decided as the beginning of the project. One of the owner's ability is to notice the expecting changes in
design and construction phases as well as the life–cycle and services. In reality, the early participation and well–timed decisions of the owner obviously
reduce a considerable amount of time during the whole planning, designing, and constructing processes. As reported by project team members from

Rudolph The Red-Nosed Reindeer
Rudolph The Red–Nosed Reindeer – Told From Another Point Of View ! We all know the tale of Rudolph the Red
–Nosed Reindeer; the pariah of the
Reindeer. But, nobody ever cares to hear the other side of the story. Today I'll clear up the ambiguous tale of Rudolph the Red
–Nosed Reindeer.
Rudolph was not the resilient little reindeer that he is always portrayed as. This is due to the fact that he had nothing to be resilient about. The other
reindeer never even called him names! I can hear you all yelling, "You guys made fun of his nose!" It is just not true though, many of the other
reindeer even admired his bright red nose, I personally thought it gave him an aura of panache. The foremost reason why Rudolph was the outcast of
the group was his... Show more content on Helpwriting.net ...
Santa was quite the enigma, he smelt of pungent onions, he was a voracious reader during his 11 months of paid holiday, he had an affinity with
George Orwell, I guess that does explain his verbose and somewhat ostentatious vocabulary. But, he also had an idiosyncrasy to always use
neologisms, his often abridged english was quite annoying. His ubiquitous influence was felt among the reindeer though, they all would listen to him,
even Rudolph. So I asked Santa if I could speak to him about Rudolph. "What about the new reindeer Dasher?" He stated. "Well, Santa he is kinda
morose and vindictive. I don't think he should lead the sle–" "Lol don't be facetious Dasher, the sleigh has two broken head lights! And it's going to be
foggy out. Now go on, get back to the other reindeer." Well, that went well, he always was a poignant smelling man and a frugal old one at that, it's
almost as if he doesn't get paid for the other 11 months of the year. His prudent and tactful attempt to not offend either party worked well, it was quite
proactive, albeit a little brusque.It Pappano !2 must have been serendipitous for Rudolph, when I told him and the others that Santa said Rudolph would
lead the

Cis 517 Prairie Waters Project
PMI 2011 Project Of The Year Award Winner The Prairie Waters Project Prairie Waters Project (PWP) was the largest water project of its type
completed in more than 30 years in Colorado. The efforts and unwavering ethics of the project team members resulted in delivering outstanding water
quality to the city of Aurora. A severe drought in 2002–2004 left the city of Aurora with only a 9–month supply of water. The Leaders of the city
considered over 40 optional ways and methods to get additional water to customers of Aurora. They considered importing additional water from across
the continental divide. After careful review, the city decided on what is now known as the Prairie Waters Project. This water delivery system brought in
... Show more content on Helpwriting.net ...
3). The final factor that led to the great success of the PWP dealt with risk management. The team used early risk identification and mitigation to
minimize the effects of any possible risks. The risk management process also provided assurance to Aurora Water that risks were properly evaluated
and could be contained from a financial standpoint. A formal risk management plan was developed in early 2007, with a focus on controlling the
project cost. The risk analysis process provided an extra benefit to the PMT by highlighting the need to manage project risks such as environmental
mishaps to avoid actions that would trigger regulatory enforcement action. A proper risk analysis reduced cost increases due to change orders and
avoided permitting and land acquisition delays. There were several obstacles that had the potential to impact the scope, time, and the cost of the PWP.
According to Schwalbe (2011), "Managing the triple constraint involves making trade–offs between scope, time, and cost goals for a project" (p. 8).
The PWP required over 400 owner–acquired and overseeing permits. Any delay in obtaining a permit would cause the time schedule to slip. This
massive project required

Caltrans Strategic Management Plan Analysis
I have a vast knowledge of the Caltrans' Strategic Management Plan, its purpose, and federal and state regulations that apply to and impact the work of
the Department. These regulations led to the prudent decision of the Department to change its mission, vision, and goals to maintain and optimize the
performance of its vast transportation system to align itself with the current federal and state laws and regulations to deliver its programs efficiently and
effectively in accordance with continuously improving policies and procedures. Moreover, the new mission and goals address the Department and
local transportation partners' ever changing role where demands and expectations for efficiency and accountability are at an all time high. In addition,

Integrated Project Delivery Paper
Integrated Project Delivery or IDP is a one of the newest project delivery methods in the US construction industry. This method focusses on the
collaboration of all the parties involved during the entire process of construction. As all the teams work together, the risks, liabilities, incentives and
responsibilities are equally shared by everyone. Even associates having more than 5% of share in the total cost of the construction project are equally
liable as any other members of the entire group.
Building Information Modelling or BIM is usage of various soft wares which are flexible, highly detailed, contain extensive data and can efficiently
help in simulation the activities of construction. This simulation can be rendered in various dimensions. ... Show more content on Helpwriting.net ...
This helps in making the project extremely cost and time effective. The construction manager can provide design timelines to all the participating
members of the project. Once the designs are ready, the design conflicts can be solved in group meetings. The traditional method of construction is
inefficient in this matter as the problems in design will be faced on site and corrections to this can be extremely costly and inefficient.
IDP is a signed contract between all the participating parties. Therefore, the BIM designs can work as legal documents if any issues arise. The amount
of importance given to these drawings and other policies can be decided in group meeting of the various parties. This helps in making the contract
clearer. Also, the designers can copyright or have mutual understandings between the constructors regarding the sharing of their designs with any third
party or using the designs in any future

Mace Group Ltd Company Analysis
Mace Group Ltd 1.Introduction The Mace Group Ltd was formed in 1990 by a small team of construction professionals in London, United Kingdom.
It has over 4,000 employees. The company has three strategic sectors serving clients in the private, public and infrastructure sectors and five strategic
hubs in Europe, Middle East & North Africa, the Americas, Asia Pacific and Sub–Sahara Africa that service over 70 countries. By the end of 2013,
there were 214 operations directors, 82 directors and yearly turnover was 2.5 billion dollars. Today Mace is an international consultancy and
construction company, offering integrated services across the full property and infrastructure life cycle. In North America area, Mace provides project
management, cost consultancy and facilities management services across the country. It has regional hubs in New York, Newark, Atlanta, Chicago
and San Francisco. In Engineering News Record's Top 250 Global Contractors List for 2014, Mace has been ranked 10th in the list of top 20 non–U.S
firms in international construction management and programme management fees, 9th in the list of the top 20 non–U.S. firms in total global
construction management and programme management fees and 166th in the overall list of top 250 international contractors. Safety first. Second
nature, client focus, pursuit of a better way, integrity, opportunity and one Mace are company's core values. The Center of the Company's business is
client focus. Hence

What Is Ipd ( Integrated Project Delivery?
What is IPD (Integrated Project Delivery)? The American Institute of Architects (AIA) currently defines IPD as "a project delivery method that
integrates people, systems, business structures and practices into a process that collaboratively harnesses the talents and insights of all participants to
reduce waste and optimize efficiency through all phases of design, fabrication and construction (Wikipedia, The Free Encyclopedia 2015). .
Over time, businesses are adopting the integrated project delivery and project partnering in place of traditional delivery methods. Adopting integrated
project delivery methods are advantageous since they help reduce costs, do away with waste as well as improving productivity hence positive project
outcomes (Burcin &Karen, 2010). IPD works in a way such as all team members integrate with each other. For instance, the owner, construction
manager, architect, engineers, subcontractors, and even technical vendors work together. IPD is an effective tool because it involves all team
members who work collaboratively to ensure the success of the project. In the construction industry, IPD goes hand in hand with BIM. The alignment
of the software BIM is leading the path for collaboration and the merging of all facets of project delivery – architectural, engineering, mechanical,
construction, costing, programming, and life cycle management. The ability to unite all facets of the design and construction into a shared model is
beneficial from numerous

Integrated Project Delivery For Construction
INTEGRATED PROJECT DELIVERY IN CONSTRUCTION
Saveesna Pricella Baskaran, M.Eng.
Construction Engineering and Management, Zachry Department of Civil Engineering
Texas A&M University, College Station, TX 77840.
Email: sbaskaran90@tamu.edu
Phone: 480.438.2721
Abstract:
The productivity decline in the construction industry in recent years is mainly due to the schedule and cost overruns, poor coordination between the
project participants and ineffective planning. Integrated project delivery (IPD) solves these issues by integrating project participants, processes,
practices, systems, business and work structures into a process that collaboratively harnesses the talents, ideas and insights of everyone involved in the
project. This method ... Show more content on Helpwriting.net ...
The paper ends with a discussion on the pros and cons of Integrated Project Delivery followed by future scope of the same.
Introduction
An Integrated Project Delivery team consists of key project stakeholders who come together during the commencement of the project to set up a open
collaborative process. As opposed to traditional delivery methods, Integrated Project Delivery is a concurrent and mutli–level leading to sharing of
knowledge and expertise. Much of this sharing happens through the digital media through Building Information Modeling. This is a very comfortable
means to share resources amongst the team. Thus, the process builds a lot of stakeholder trust and respect where success and risks are shared amongst
everyone. Beyond all these benefits, Integrated Project Delivery presents a lot of positive propositions to the major stakeholders, the owners, the
constructors and the designers by bringing them together very early into the process and the resulting a better understanding of the goals, the logistics,
the cost and the timeline of the project. Integrated Project Delivery, thus adds the following characteristics to a project.
1.Mutual Trust: All involved parties are brought together at the start itself to build trust and make them understand each other's strengths and
weaknesses.
2.Mutual Benefit and

Sutter Health Case Study
I learned that Sutter Health has an opening position for a Project Manager. I am applying for this position and submitting my resume for your
review. I am a registered architect and project manager with 18 years experience, and have been focused on healthcare projects for last 16 years. I
have been involved in acute care general hospitals, outpatient surgery center and medical office building projects of various sizes. I have been
responsible for delivering projects from planning to construction and close–out using various project delivery methods including Design Build and
Integrated Project Delivery. I have in–depth knowledge of health care construction building codes and regulations, space programming, discretionary
approval processes,

Applicability Of 4d Modeling For Resource Allocation Of...
a) I read an article named "applicability of 4D modeling for resource allocation in mega liquefied natural gas plant construction" in Automation in
Construction. The authors are Ying Zhou (Huazhong University of Science &Technology), Lieyun Ding Huazhong (University of Science
&Technology), Xiangyu Wang (Curtin University), Martijn Truijens (Australasian Joint Research Centre for Building Information Modeling), Hanbin
Luo (Kyung Hee University). b) This paper presented that four–dimensional (4D) modeling has gained much potential in improving construction
process design and planning. It gave readers a description about the tradition approach in Liquefied Natural Gas (LNG) plant construction and the
development of it. Then the author described a process of an example where 4D models were applied to an offshore LNG plant construction project.
At last the paper made a conclusion that the 4D models played an important tool for LNG construction projects and planning and the scheduling of
resources. The focus of this article is similar to a topic covered in CVEN 638. The topic is "Digital Cities". In the class, the professor gave us the
concept of digital cities. A digital city platform allow for heterogeneous 2D, 3D and 4D temporal data to be brought together in a comprehensive
format. Here the 4D model means the time streamline will be added in the model visualization in order to improve the efficiency of scheduling,
planning and cite communication. It's

Supply Chain Six Sigma in Rmg Sector
Supply chain Management six sigma at RMG
Prepared by
Mohammad Mesbah Uddin,
ID–2013–3–5–019, MBA@BUTEX
1
27–12–2014
ID–2013–3–5–019, MBA@BUTEX
TABLE OF CONTENTS
S.I
PAGE
0
ABSTRACT
3
1
INTRODUCTION

4
2
SIX SIGMA APPROACH
TO DESIGN
5
3
ANANLYSIS OF SUPPLY
CHAIN DELIVERY
PERFRMANCE
6–7
4
DESIGN OF SIX SIGMA
SUPPLY CHAIN
8
5
OUTLINE OF THE
PACKAGE
9–10
6
SMMARY AND FUTURE

WORK
11
7
2
NAME OF ARTICLE
REFERENCES
12
ID–2013–3–5–019, MBA@BUTEX
ABSTRACT
The ready–made garment (RMG) industry has recently occupied the largest part of exports and foreign currency in Bangladesh and has been for more
than a decade the second largest contributor to gross domestic product ... Show more content on Helpwriting.net ...
This metric is most important in supply chain management as it integrates the measurement of performance right from supplier end to the customer
end. Present research is focused on a case study conducted in a leading Apparel manufacturing firm in Bangladesh and analysis of elemental
performances in overall delivery performance of an entire supply chain in an integrated approach.
3
ID–2013–3–5–019, MBA@BUTEX
INTRODUCTION
Supply chains provide the backbone for manufacturing,service, and E–business companies. The supply–chain process is a complex, composite business
process comprising a hierarchy of different levels of value–delivering business processes. Achieving superior delivery performance is the primary
objective of any industry supply chain. Quick and timely deliveries entail high levels of synchronization among all business processes from sourcing

to delivery. This in turn calls for variability reduction all along the supply chain. Variability reduction and businessprocess synchronization are
therefore acknowledged as key to achieving superior levels of delivery performance in supply–chain networks.
Delivery performance can be defined as the level up to which products and services supplied by an organization meet the customer expectation. It
provides an indication of the potentiality of the supply chain in providing products and services to the customer. This metric is most important in supply

A Results Oriented Hybrid It Project Manager With...
CAREER SUMMARY
I am a results oriented Hybrid IT Project manager with experience in developing and incorporating business requirements and change request. I have
analysed the present situation and then made future projections based on this knowledge and expertise. I have developed a variety of case studies and
focused on user experience for Agile based projects. I have led meetings with stakeholders and then managed the business requirement and specification
process. I have planned projects, prioritized sprint releases, prepared files and dispatched the business requirement and specification process documents
and implement the CRM Siebel and Salesforce applications. I perform my project management using MS project plan and Sprint Plan.
KEY CAPABILITIES
Integration Management: Integrated project plan, scope ,time, cost and quality expectation of project to meet the stakeholder expectation and on time
delivery.
Communication Management: Managed multiple communication plan with severity and priority basis of communication to stakeholder, vendor, team
and escalation to reduce the communication gap of project failures.
Vendor Management: Managed to deliver vendor services with under pining contact and service level agreement
Release Management: Expert in project planning with release plan target and execute the project according to the release plan.
Risk Management: Managed project risk registry implementing RADAR meeting to update project risk

Integrated Project Delivery Method For Construction
Integrated Project Delivery Method
What is IPD (Integrated Project Delivery) as it applies to construction? Generally speaking here is how it works: IPD is a process where a team of
everyone involved in the project gets together and create a plan then continue to be involved to see it through completion. The team is bound together
by contract legally and stands to gain or lose financially as a whole by the outcome of the project. The American Institute of Architects (AIA) currently
defines IPD as "a project delivery method that integrates people, systems, business structures and practices into a process that collaboratively harnesses
the talents and insights of all participants to reduce waste and optimize efficiency through all phases of design, fabrication and construction
(Wikipedia, The Free Encyclopedia 2015). Instead of each stakeholder having their own side projects all members are stationed in the same pool where
they can exchange ideas. At this point, the project depends on collaboration and team building (Burcin &Karen, 2010).
In a bit more detail, the team can be owner, construction manager, architect, engineers, builders, contractor, subcontractors, designers and even
technical vendors depending on the project. They are legally bound by a contract from the concept phase through the completion of the project. Each
member of the team is involved has a say in all phases and has a responsibility for completion and quality of all phases. Unlike traditional

What Is Oracle Primavera Unifier
White Paper
Oracle's Primavera Unifier – The best–in–class project lifecycle management solution
December,2015
Table of Contents
Abstract1
1. Introduction1
2.Why Oracle Primavera Unifier ? 1
3.Key Benefits............................................................1
5. The Challenges of Enterprises Today2
6.Solution to Over come Risks4
7.Conclusion5
8. References5
9.About the Authors5
Abstract
With the ever changing dynamics of industries and a need to maintain a cohesive project management processes in Project based enterprises, PPM
solution has been become very critical for companies to maintain control and visibility on the projects. Oracle is competing with number of
companies to maintain its leadership and to keep hold of its customers who are either using standalone applications for Project management or using
ERP for Financials or new customers who are still on legacy systems. In the last few years, Oracle has acquired Primavera, then Skire and then
acquired company called Instantis and also has built ... Show more content on Helpwriting.net ...
So to improve project visibility and implement better financial controls for capital projects totaling US$900 million, the University of Utah in Salt
Lake City replaced its in–house database for tracking construction projects with the cloud–based Oracle's Primavera Unifier project management
system. The result: the university recently completed two large–scale projects on or before their deadlines at a total of US$11.5 million under budget.
Paul Bender, Oracle's director of public administration strategy, explains how the university achieved these impressive outcomes.

One of the projects was the 156,000 square foot Huntsman Cancer Center Phase IIB expansion. What was the impact on that project of having
improved financial controls and better

Cathedral Hill Hospital
Cathedral Hill hospital
Client's requirements:
The owner California pacific medical center, an affiliate of Sutter health came up with the project of building a new medical center known as the
Cathedral Hill Hospital within the San Francisco metro area. In 2002, California pacific medical center hired the architecture firm, Smith group under
the Sutter's multiparty contract, integrated form of agreement (IFOA) to design the 860,000 sf, 14 level hospital that could house 555 beds. Sutter was
also involved in cost predictability and hence they used Integrated Project Delivery (IPD) as a company. In addition to this, Schedule predictability
was also a vital reason for using IPD to encounter the various critical variables of the project. The client also wanted to implement and execute BIM
so as to achieve the designated goals. As per the requirement following are the list of owner's design goals:
Excellence in clinical care
Education
Community Service
Patient satisfaction
Family involvement with the patient
Private room
With the progress of the project, the owner (Client) came up with various additional items they desired to add, mainly referred to as the value added
items and stalked them on separate budget line because they were not intended in the original program or estimated maximum cost. As the team
reduced costs through innovation, coordination and teamwork, they were able to incorporate some of the value added items the client desired.
Project

IPD: Mutual Benefit And Reward
1.1Mutual Benefit and reward: All parties of construction project will benefit from IPD. The integrated process required more participants'
involvement at early stage, because the IPD structure will recognize the compensation and reward at early involvement. The compensation will be
based on adding value to the project and it will rewards what's the best for the project instead of individual benefit. For example providing incentives
tied to achieving project objectives and goals. The concept is to use innovative business models to enhance collaboration and efficiency.
1.2Mutual respect and trust: The IPD requires from all participants such as owner, designer, consultants, constructor and suppliers to understand the...
Show more content on Helpwriting.net ...
1.6Intensified planning: By increasing the effort in planning, the efficiency and saving during execution will be increased. So the concept is to improve
the design results as well as smoothing and shortening the much more expensive construction effort, not to reduce the design effort.
1.7Appropriate Technology: One of the successful key in the integration project approach now a day is that the integrated project based on cutting edge
technology. So it is vital to specify the technologies at the project initiation to maximize functionality, generality and interoperability. The IPD approach
is coordination and collaboration process, for that it is essential to support it with open and interoperable data exchanges based on disciplined and
transparent data structures where the technology is appears. This type of practice is called open standards which enable communications among all
participants, so the technology used should comply with the open standards whenever available.
1.8Open communication: The IPD based on team performance which requires open, direct, and honest communication among all participants. It is
important that the responsibilities are clearly defined in a no–blame culture between the participants which will leads to identify and resolve the
problems, not to determine of liability.
1.9Organization and leadership: The IPD approach is an organization in its self and all team members are committed

M6 Toll Road Construction
The design and construction of buildings can be a complicated business involving different professions, contractors, sub–contractors and operatives.
This type of work is varied and employs many construction personnel with different roles and responsibilities, working together to complete a project
in as successful way– on time, on budget and to the right specification. A largeproject would involve a great number of different activities:
Building
Architecture
Planning
Surveying
Civil engineering
Structural engineering
Building Services engineering
Facilities and Estates Management
The type of client involved in a large building project would be called a commercial client. The client has to draw up a procurement path, the most ...
Show more content on Helpwriting.net ...
The first stage allows the contractor to start the work followed by the second stage whereby a fixed price is negotiated for the contract. It can be
used to appoint a main contractor early or as a means of appointing a specialist contractor early. It can also be used on a design and build project
whereby an employer's requirements are not expanded on enough for a contractor to come up with a realistic price. The first stage can be a 'custom
made' agreement, a consultancy agreement or a pre–construction services agreement (PCSA). The early involvement of a contractor improves the
construction and cost certainty of the project and for a more integrated project team, thus reducing likelihood of disputes. The second stage is a
mathematical exercise. In two stage tendering, design risk is transferred to the contractor but the client can lose hold, as competition becomes less of a

Designing A Project Management Software
Should every building business invest in the latest integrated construction management software or are construction software solutions considered an
unnecessary business expenditure? Innovative construction accounting software plays an important role and today the majority of companies organize,
plan and estimate project costs using a project management software solution. This sophisticated software, designed especially for the construction
industry, aids communication and decision making and helps with budget management, scheduling and cost control. But, how can a construction
software package boost business and what are the top ten benefits of construction management software?
Effective Construction Software Makes Management Easier
Construction management software helps managers to adopt a systematic approach and the best construction software is easy to understand; enabling
staff to ensure every project goes according to plan. Project management is a skilled task, but construction management software allows staff to create
professional RFIs, transmittals, submittals, business letters and change requests. Clients, consultants, subcontractors and project managers can
instantly share valuable information and the project budget can be tracked using integrated construction accounting software. So, in a nutshell,
construction software promotes your business and helps you to build brand awareness.
Construction Management Software Controls Documents
Construction companies create

Dell Project Management Approach
DELL DEpLoymEnt DESIGn AnD ImpLEmEntAtIon Let Dell Services help eliminate complexity and accelerate deployment. our ApproAch IS
DESIGnED to ImprovE SpEED AnD rEDucE rISk The Dell Project and Program Management approach enables the alignment of all elements of a
client deployment. This standardized and easy–to–understand framework can be tailored as necessary to complement and integrate with existing
customer processes. From the beginning, we work collaboratively with our customers in a formal workshop to capture the detailed requirements and
commence planning/design . To ensure seamless execution, we have identified four critical and universal checkpoints where we apply controls and
measures so that disparate types of... Show more content on Helpwriting.net ...
Pilot and review: An essential part of any deployment is testing of all elements of the agreed approach to reduce the risk of
compromisingasuccessfuloutcomefortheprojectandtoidentifyareasforimprovement.Ourtried–and–testedapproachis designed to ensure all areas are
reviewed, with any lessons learned fed back to improve the approach and the likelihood of a successful outcome. eploy: Wherever possible, deployment
tools may be used to automate the process and reduce manual intervention. D Where manual intervention is required, processes will be documented,
tested and signed off to ensure consistency of approach.
Considerationisgiventothelevelofuserintervention,interactionanddisruptiontoensurethedeploymentapproach fits your requirements. This may be within
or outside normal working hours, and could be integrated with a formal training and communications program. Tools are available to assist with user
and data migration if required. ser sign–off: CustomerexperienceiscentraltoeverythingwedoatDellanditisvitaltoensuretheuserexperienceisU consistent. To
achieve this, a formal sign–off process agreed upon and documented. This can be integrated with tailored satisfaction surveys to ensure user experience
and comments are captured and

Current Trends On The Construction Industry
Current Trends in the Construction Industry
Beginning a new year of the construction industry with a report of 6% growth (achieved approximately $712 billion) in the financial profit of
construction from Dodge Data & Analytics ' 2016 Construction Outlook, many analysts and experts predict that potential values for the construction
business will be progressively increased with extensions of modern technologies and state–of–the–art concepts for improving construction performance,
especially in project cost and schedule achievements (Peiffer, 2016). Although it is noticeable that diverse tendencies, including prefabrication or
offsite constructions, green buildings, remodeling, etc., are taking higher place in the next decades, true collaborations, sophisticated building modeling
tools, and practical value–boosted procedures are always bottom lines for a blossoming construction project. It is unquestionable that construction
project costs and schedule are spectacularly difficult to predict by reason of complexity of building procedures and presence of thousands of dependent
variables throughout a project. As a result, duties and responsibilities of forecasting and envisioning project cost and schedule performance are
considered as momentous challenges and complicated issues for all construction experts and professionals (Ai et al., 2015). Growing from these
concerns, a suggestion of synergizing components that particular affect the cost and schedule efficiency is becoming an

Benefits Of Integrated Healthcare Models
Prior research of geriatric access to behavioral health services shows that the primary care provider is typically the provider to assess, diagnosis,
and manage medication for depression (CDC, 2010). However, not all seniors have access to a primary care physician or are seen in a traditional
clinic due to physical or cognitive impairment. Behavioral health services are one of the largest gaps in geriatric care yet to be closed because of the
difficulty in identifying a behavioral health need, referring clients to the appropriate provider, and following through on that referral. Past research has
collected useful and informative data from seniors in varying types of healthcare settings (Bayliss, 2015), but has not captured much data from... Show
more content on Helpwriting.net ...
There are several housecalls programs in North Texas. The program covering the largest geographical area, Organization A, will provide the sample
for this study. Time series design is applicable because of the number of influencing factors in identifying and treating depression. For example, stress,
brain chemistry, or genetics may contribute to the occurrence of depression in older adults (NIMH, 2016). "Depression can also co–occur with other
serious medical illnesses such as diabetes, cancer, heart disease, and Parkinson's disease" (NIMH, 2016). Organization A is affiliated with the
largest hospital system in North Texas. This allows the researchers to gather data from a diverse population of participants and test the
effectiveness of an integrated healthcare system when applied to the care of homebound seniors. Seniors over the age of 65 who are admitted to the
affiliated hospital with one or more chronic disease, have Medicare, Medicaid, or are unfunded, and meet homebound criteria will be referred to
Organization A by the hospital Social Work and Care Coordination team. The referred senior will be contacted within 48 hours of hospital discharge
and informed of the housecalls program and asked if they want to be admitted for primary care. At the time of admission to the program by a Nurse
Practitioner (NP) or Medical Doctor (MD) a patient health questionnaire will be

Eastlink Project Stakeholders
The project stakeholder refers to individuals, groups or organizations that are actively involved with/in the work of project or who may affect, be
affected by, or perceive itself to be affected by decision, execution, completion and outcome of a project ( ). Project stakeholders have an impact on the
purpose and results of the project. The project management team must identify the project stakeholders, determine their needs and expectations, and
manage the demand–related impact to the greatest extent possible to achieve project success. The following are the major stakeholders of the Eastlink
project:
Thiess John Holland
Thiess John Holland is an unincorporated joint venture between two of Australia's largest construction and engineering ... Show more content on
Helpwriting.net ...
It is responsible for the financing, design, construction, maintenance and operation of Melbourne's EastLink tollway project. It won the $2.5 billion
tender in 2004 and became the franchisor with rights to operate the newly–constructed motorway for 39 years. Principal stakeholders in ConnectEast
included Macquarie Bank, Thiess and John Holland. As a project contractor, the most interest of the ConnectEast is the general profit and the valuable
work experience. Meanwhile, the construction of the nation's biggest road project can attain a high reputation which is benefit for the company and
can promote company development.
Southern and Eastern Integrated Transport Authority (SEITA):
The Southern and Eastern Integrated Transport Authority (SEITA) is the independent statutory authority established by the Victorian Government in
2003, to facilitate delivery of the EastLink project on behalf of the Victorian Government. The responsibility of the SEITA is to manage the process of
selecting a private sector bidder and oversees the State's ongoing interest in this landmark Project. Consequently, the interest of the SELTA is to
increase the economy, promote the development and attain a high reputation and the support of the

The Construction Of A Construction Project Delivery
Research Scopes and Goals
Depended upon developing trends of not only the U.S. construction industry, also the worldwide one in general, this research is precisely about the
cooperating relationships and efficiencies of a full collaboration, including Integrated Project Delivery (IPD), Lean Construction, and Building
Information Modeling (BIM) in intensifying performance of plenty construction project types. Specifically, this research investigates and analyzes
numerous necessary means and techniques used for a true collaboration of cooperation of IPD, Lean, and BIM (or ILB in short); additionally, the
efficiency of full–ILB cooperation is proved by the examination of two important variables of a construction project, which are Cost Performance
Index (CPI) and Schedule Performance Index (SPI), with participation of more than 75 projects and case studies. Technically, three essential phases of
a construction project, such as pre–construction (planning, pre–design, estimating costs, schematic design, and constructability review), construction
(managing constructing process, tracking project schedule, and controlling costs), and post–construction (closeout work and final completion) are
specifically investigated together with proposed conceptually synergistic models of these factors. Investigating all possible components for a perfect
ILB and evaluating this partnership's effects on project cost and schedule performance are spreading more and more knowledge and applications of

Sarbanes-Oxley Act Section 404 Analysis
The main idea behind the PCI–DSS is that a standard is made to help the controls of the card holder data and it is primarily done to divert the credit
card blunder by introduction. The primary thought behind the Payment Card Industry Data Secured Standard commonly called as PCI–DSS is that the
standard is made to help the controls of the card holder information also, its chiefly done to the turn away the credit card misinterpretation by exposure.
The PCI–DSS was introduced by four prime credit card organizations in particular Visa, Master Card, Discover and American Express. Financial
Sector: Summarize the main idea of Sarbanes–Oxley Act Section 404 The essential thought behind the Sarbanes–Oxley Act Section 404 is that an
interior control

Logistics And Supply Chain Management
Logistics and supply chain management is an important aspect of a firm's strategy for the business to achieve success by creating value throughout the
logistics and supply chain. The research paper will outline the concepts that are involved in creating the logistics and supply management framework.
The logistics and supply chain management strategies will drive success for the company towards fulfilling and supporting customer needs, procurement
and manufacturing operations of the firm.
This research project is significant and important because it will allow the company to identify gaps in the supply chain as well as opportunities to
improve on the logistics and supply chain. The complete operation of the firm is integrated from acquired ... Show more content on Helpwriting.net ...
John's, NL and operates out of 10,000 square foot building. The building consists of manufacturing plant, warehouse, sales, distribution and corporate
office. The building has a top of the line freezer and cooler that is able to store inventory and raw materials.
The company manufactures ground beef and cured beef products. The company sells and distributes its products to supermarkets, local food stores as
well as direct sale and deliveries to customers from our warehouse and distribution center.
The company has approximately sixty members on staff which includes sales, operations and marketing team. DRT Food Manufacturing and
Distribution Limited represents 20% of the market. The major categories of our product line include:
Cured Navel Beef
Cured Pork Riblets
Ground Beef
DRT Food Manufacturing and Distribution Company is dedicated to providing safe quality beef products to our customers. The manufacturing and
distribution arm is totally committed to meeting customer requirements in a fast, efficient and timely manner through our state of the art
manufacturing, warehouse and distribution facility.
The goal of DRT Food Manufacturing and Distribution Company is to provide high quality product to our customers in an efficient and cost effective
manner thereby providing value to our logistics and supply chain.
To provide efficient and timely delivery of our products through superior quality customer service at

Problems Associated With Flood Patterns And Poor Water...
Introduction
The River Churn has various issues associated with flood patterns and poor water quality, affected by continually changing land–use patterns. A
bi–product is the negative impact that poor water quality has had on ecology. The main aim therefore was to improve the water quality and
biodiversity in order to meet the demands of EU Legislation, during a three–year pilot project. The approach was provided by the WILD Project (Water
with Integrated Local Delivery). The WILD Project was initiated in 2013, by FWAG (The Farming and Wildlife Advisory Group), set within the
Cotswold Water Park (FWAG South West, 2015).
The EU Legislative Body is the Water Framework Directive (WFD) defining a water body as 'not a commercial product like any others, but instead a
heritage which must be protected, defended and treated as such' (European Parliament and the Council of the European Union, 2000). Under the
Community Water Policy Seminar (1998), the need for 'Community' legislation covering ecological quality was established. Therefore an integrated
'Community' policy on water was developed, an area that the WILD Project has incorporated, using an 'Integrated Local Delivery' method integrated
with a 'Catchment Based Approach'. The main objective was achieving the 'good ecological status' on all surface and groundwater, or in heavily
modified sections the river must achieve 'good ecological potential' (European Parliament and the Council of the European Union, 2000). The

Enterprise Resource Planning : Effective Communication And...
Enterprise Resource Planning The success of any business lies in effective communication and proper data exchange within internal departments.
Delayed in latest information is a remarkable obstacle in failure of any business. To overcome this problem, a proficient solution "ERP" came into
existence. The vast tool, capable of integrating internal business processes of any organization, is so called termed as Enterprise Resource Planning.
ERP is an approach of amalgamating the various departments of an enterprise such as Sales, HR, Finance, Marketing, Production, Warehouse, etc. The
single source where internal departments can share and access information quickly is ERP. In actual, ERP is a wide centralized database where all the
inter–departmental data is stored. It is capable of performing multiple operations in a single time and can be used by various enterprise units at the same
time. Major benefits are: Provides integration of various departments, third party tools, etc and allowing easy communication between them. It saves
time as users need not to wait for latest informations. Eliminates duplication, discontinuity and redudancy in data. Ease of upgradation of entire system.
Facilitates data exchange. Odoo The concept of high–level integrated architecture, to satisfy the needs of fetching inter–connected information, within
various departments of an organization, has given a great relief to millions of users. Odoo is a license free software combining all the

Company Analysis : Ryan Company
Individual Research Paper: Ryan Companies
Overview
Ryan is a construction company that specializes in integrated project delivery, building information modeling (BIM), Lean construction practices and
sustainable design for office, retail, industrial, public sector, alternative energy (biomass and gasification,[2] wind, solar), health care, higher education,
hospitality, mission critical, multi–family and senior housing and mixed–use projects. With in–house construction, design, development, capital markets
and real estate management, Ryan uses integrated project delivery (IPD) as a preferred method for and delivering design and construction projects and
organizing project teams.
Ryan Companies US, Inc., a nationally recognized developer, design–builder and real estate manager, has specialized in fully integrated solutions for
more than 75 years. Ryan builds 'lasting relationships ' with a project delivery model based on full–service customized solutions and total collaboration
–– pairing the customer 's needs and expectations with the talents of a team of developers, financiers, architects, engineers, constructors and property
managers.
Company history
Ryan Companies US, Inc. was founded in Hibbing, Minnesota, by James Henry Ryan. Forming a partnership with his sons Francis and Russell, James
bought the Frederick Lumber Company and renamed it Ryan Lumber and Coal in 1938. In 1949, Russell and Francis formed Ryan Realty Company to
own, finance and manage the real estate

Executive Summary For Business Planning
SUMMARY
I am a Strategy Analyst/Consultant with tertiary qualifications in Business Management and an international certification as a Change Management
Practitioner. I have more than five–years of experience in assisting companies in Strategic Planning, Business and Cultural Transformation,
Organisational Design, and Leadership Development projects across a number of sectors in Australia and abroad, including Higher Education,
Automotive, Government, Healthcare, and Agribusiness. I have a solid understanding on how to develop a multi–year strategy and planning process
by coordinating and liaising with the relevant key stakeholders, create a system and organisational dashboard to ensure performance accountability,
lead and deliver strategic ... Show more content on Helpwriting.net ...
Facilitation skill: ability to guide and direct key parts of organising work with the relevant stakeholders, including the senior leadership/management
team in meetings, planning sessions, and training classes, for high–level decision making
Leadership skill: ability to develop and motivate team members and resolve conflicts
Project management: strong ability to independently deliver quality output within set timelines and manage competing priorities
IT/Computer skill: highly competent in utilising the Microsoft Office suite (e.g., Excel, Word, PowerPoint, Outlook, Project, and Visio) as well as
other analytical and reporting tools (e.g., DAPPER/Tableau, SPSS, SQL, and Business Objects)
PROFESSIONAL EXPERIENCE (SELECTED)
DWS Ltd Jan '18 – Apr '18
CHANGE ANALYST/CONSULTANT
Assessed the client's change readiness in implementing the Agile Methodology in their project delivery, and accordingly, crafted a Change Plan
Improved the schedule and project timeline, and monitored and created a report on project progress
Organised and executed the Change Requests to meet project goals and performed risk management
Coordinated Process Analysis and Process Improvement

ERP System Introduction Proposal for Classical Bicycle Manufacturer

Recommended

Recommended

More Related Content

Similar to ERP System Introduction Proposal for Classical Bicycle Manufacturer

Similar to ERP System Introduction Proposal for Classical Bicycle Manufacturer (16)

More from Debbie Beason

More from Debbie Beason (10)

Recently uploaded

Recently uploaded (20)

ERP System Introduction Proposal for Classical Bicycle Manufacturer