2. Computer Systems Servicing – Grade 11
Quarter 1 – Module 17: DOS commands in preparing bootable device
First Edition, 2020
Republic Act 8293, Section 176 states that no copyright shall subsist in any
work of the Government of the Philippines. However, prior approval of the
government agency or office wherein the work is created shall be necessary for
exploitation of such work for profit. Such agency or office may, among other things,
impose as a condition the payment of royalties.
Borrowed materials (i.e., songs, stories, poems, pictures, photos, brand
names, trademarks, etc.) included in this module are owned by their respective
copyright holders. Every effort has been exerted to locate and seek permission to use
these materials from their respective copyright owners. The publisher and authors
do not represent nor claim ownership over them.
Published by the Department of Education - Schools Division of Pasig City
Printed in the Philippines by Department of Education – Schools Division of
Pasig City
Development Team of the Self-Learning Module
Writer: Ronald S. Bobis
Editor: Lerma I. Cantanero
Reviewers: Felix C Vergara Jr. (content)
Illustrator: Name
Layout Artist: Name
Management Team: Ma. Evalou Concepcion A. Agustin
OIC-Schools Division Superintendent
Aurelio G. Alfonso EdD
OIC-Assistant Schools Division Superintendent
Victor M. Javeña EdD
Chief, School Governance and Operations Division and
OIC-Chief, Curriculum Implementation Division
Education Program Supervisors
Librada L. Agon EdD (EPP/TLE/TVL/TVE)
Liza A. Alvarez (Science/STEM/SSP)
Bernard R. Balitao (AP/HUMSS)
Joselito E. Calios (English/SPFL/GAS)
Norlyn D. Conde EdD (MAPEH/SPA/SPS/HOPE/A&D/Sports)
Wilma Q. Del Rosario (LRMS/ADM)
Ma. Teresita E. Herrera EdD (Filipino/GAS/Piling Larang)
Perlita M. Ignacio PhD (EsP)
Dulce O. Santos PhD (Kindergarten/MTB-MLE)
Teresita P. Tagulao EdD (Mathematics/ABM)
4. Introductory Message
For the Facilitator:
Welcome to the Computer Systems Servicing Grade 11 Self-Learning Module
on DOS commands in preparing bootable devices!
This Self-Learning Module was collaboratively designed, developed and
reviewed by educators from the Schools Division Office of Pasig City headed by its
Officer-in-Charge Schools Division Superintendent, Ma. Evalou Concepcion A.
Agustin, in partnership with the City Government of Pasig through its mayor,
Honorable Victor Ma. Regis N. Sotto. The writers utilized the standards set by the K
to 12 Curriculum using the Most Essential Learning Competencies (MELC) in
developing this instructional resource.
This learning material hopes to engage the learners in guided and independent
learning activities at their own pace and time. Further, this also aims to help learners
acquire the needed 21st century skills especially the 5 Cs, namely: Communication,
Collaboration, Creativity, Critical Thinking, and Character while taking into
consideration their needs and circumstances.
In addition to the material in the main text, you will also see this box in the
body of the module:
As a facilitator you are expected to orient the learners on how to use this
module. You also need to keep track of the learners' progress while allowing them to
manage their own learning. Moreover, you are expected to encourage and assist the
learners as they do the tasks included in the module.
Notes to the Teacher
This contains helpful tips or strategies that
will help you in guiding the learners.
5. For the Learner:
Welcome to the Computer Systems Servicing Grade 11 Self-Learning Module
on DOS commands in preparing bootable devices!
This module was designed to provide you with fun and meaningful
opportunities for guided and independent learning at your own pace and time. You
will be enabled to process the contents of the learning material while being an active
learner.
This module has the following parts and corresponding icons:
Expectations - This points to the set of knowledge and skills
that you will learn after completing the module.
Pretest - This measures your prior knowledge about the lesson
at hand.
Recap - This part of the module provides a review of concepts
and skills that you already know about a previous lesson.
Lesson - This section discusses the topic in the module.
Activities - This is a set of activities that you need to perform.
Wrap-Up - This section summarizes the concepts and
application of the lesson.
Valuing - This part integrates a desirable moral value in the
lesson.
Posttest - This measure how much you have learned from the
entire module.
6. At the end of this module, learners should be able to:
1. explain DOS commands in preparing bootable devices;
2. follow DOS commands in preparing bootable devices;
3. appreciate the importance of DOS commands in preparing bootable devices.
Directions: Read carefully the following questions. Choose the letter of the best
answer and write it on your notebook.
1. Commands used to communicate with the operating system and other
command line-based applications.
A. POS C. BOS
B. DOS D. SOS
2. A mechanism where computer hardware can be used instead of a hard
disk or a CD drive to access all the important machine booting information
and data.
A. DVD boot C. USB boot
B. POST boot D. Flash boot
3. This is the command to view active disks on your machine.
A. diskpart B. active C. list disk D. clean
4. The command for formatting current partition as NTFS file system quickly.
A. format fs=fat quick C. format fs=active quick
B. format fs=clean quick D. format fs=ntfs quick
5. By default, the active Administrator Permission directory of Command
Prompt is located at?
A. C:WindowsSystem32 > C. A:WindowsSystem32 >
B. D:WindowsSystem32 > D. B:WindowsSystem32 >
EXPECTATIONS
PRETEST
7. In the previous module, you have learned about introduction to bootable
software’s. You were made aware about the 10 best USB applications for Windows /
Mac to help you build a USB bootable Drive. Yet we will need a Bootable Program to
allow a USB bootable usable. Also, to complete the process, you'll need a web-
connected Windows or MacOS computer, A flash drive with at least 8 GB of space,
And a disk image (iso file). With these, you are a step closer to create a bootable drive
with the said bootable software’s.
This module is a continuation of the previous topic where you will know what
are the DOS commands in preparing bootable devices.
DOS commands - are the MS-DOS (Microsoft-Disk Operating System)
commands used to communicate with the operating system and other command line-
based applications. Unlike in Windows, the primary way you use the operating
system is by DOS commands. Windows and other current OSs use a touch or mouse-
based, graphics-based interface. When you're using Windows (like Windows 10, 8, 7,
etc.), you don't require DOS instructions, since you don't have MS-DOS.
Whether you've just set up your new PC or upgraded your old PC to a newer
version of Windows, you may like a bootable pendrive that has Windows Operating
System on it. A USB boot is a mechanism where computer hardware can be used
instead of a hard disk or a CD drive to access all the important machine booting
information and data.
For Dos, command-prompt is readily accessible in all Dos models. It's actually
a simpler job to build a bootable USB with a command prompt. To get your USB
bootable you can follow the steps given below.
LESSON
RECAP
8. Using DISKPART Command
1. Insert your flash drive onto your computer running. We need to run Command
Prompt as your administrator as the first step. To do so, we need to find cmd
by entering 'cmd' in the Windows Start Menu search window. Once 'cmd' has
been scanned, right-click it and pick "Run as administrator."
2. In Command Prompt type 'diskpart' (without quotes) and press Enter. Wait a
bit, before the system runs DISKPART.
Image 1.1 command prompt
Image 1.2 diskpart
9. 3. To view active disks on your machine, type 'list disk' and press Enter. It can
be shown that with their overall size, the active disks seen as Disk 0 for hard
drive and Disk 1 for your USB flash drive.
4. Type 'select disk 1' to decide the operation of disk 1 in the next stage, and
then press Enter.
5. Type 'clean' and hit Enter to delete all data from the drive.
Image 1.3 list disk
Image 1.4 select disk 1
Image 1.5 clean
10. 6. Select 'create partition primary' and press Enter. Creating a main partition,
and being known as 'partition 1' by Windows.
7. Type 'select partition 1' and hit Enter. Choosing the partition 1 for setting
up it as an active partition.
8. Type 'active' and hit Enter. Activating current partition.
Image 1.6 create partition primary
Image 1.7 select partition 1
Image 1.8 active
11. 9. Type 'format fs=ntfs quick' and hit Enter. Formatting current partition as
NTFS file system quickly.
10.Type 'exit' button and hit Enter. Exit DISKPART program but then do not
close the Prompt button. Still, we will need it for the next step.
Creating Boot sector
Suppose the flash / USB drive is D: drive and the ISO image or DVD driver on
drive F:, The first step is to navigate Command Prompt to set ISO image or DVD as
its active directory for installation.
1. By default, the active Administrator Permission directory of Command Prompt
is on C:WindowsSystem32 >. We'll be using Command Prompt to install as
the working directory on ISO image or DVD (F:). Only click 'f:' then press
Enter, and changed the active directory to F.
2. Type 'cd boot' button and press Enter. Changed Active Directory to F:boot
>.
3. Type the bootsect /nt60 d: and press Enter. Creating boot sector on D: drive
(USB flash drive).
Image 1.9 format fs=ntfs quick
Image 1.10 exit
12. 4. Type 'exit' and tap Enter to close the Prompt command. At this phase, we
have successfully made a bootable USB disk, and the flash drive is ready for
use as a boot device.
Copying Installation Files
To install Windows from a bootable USB drive, we merely need to transfer to
flash drive the entire installation files found on the ISO image or DVD installer. To
do so, open the Prompt button, as in previous steps. Upon opening, type 'xcopy f:*.
* d: /E/H/F' then click Enter. Stay before the ISO image or DVD installer transfers
all files to the flash drive. Then you're ready to use bootable USB drive to load
Windows from your flash drive and you're done!
A. Direction: Rearrange the following procedures in their proper order. Use
numbers to indicate their order of precedence. The first number is done for
you.
Using DISKPART Command
5 1. Type 'clean' and hit Enter.
___2. Type 'active' and hit Enter.
___3. Select 'create primary partition' and press Enter.
___4. Type 'select partition 1' and hit Enter.
___5. Insert your flash drive onto your computer running. find cmd by entering
'cmd' in the Windows Start Menu search window.
___6. In Command Prompt type 'diskpart' (without quotes) and press Enter.
___7. type 'list disk' and press Enter.
___8. Type 'select disk 1' to decide the operation of disk 1 in the next stage,
and then press Enter.
___9. Type 'format fs=ntfs quick' and hit Enter.
___10. Type 'exit' button and hit Enter.
B. Direction: Match Column A with Column B. Write the letter of your answer
in a separate paper.
ACTIVITIES
A
1. to view active disks on your
machine
2. to delete all data from the drive.
3. to activate current partition.
4. to create main partition
5. to exit diskpart program
B
a. active
b. list disk
c. clean
d. exit
e. creates primary
partition
13. This module talked about DOS commands in preparing bootable devices.
Specifically, it discussed the procedures in using diskpart command, creating boot
sector and copying installation files from ISO image or DVD installer. In addition,
unlike in Windows, the primary way you use the operating system is by DOS
commands. Windows and other current OSs use a touch or mouse-based, graphics-
based interface. When you're using Windows (like Windows 10, 8, 7, etc.), you don't
require DOS instructions, since you don't have MS-DOS.
Now, as learners, aside from the several points mentioned above. You can use the
blank spaces provided in the next page to answer and react to the following cases or
scenarios:
Would you be able to make use of this knowledge obtained in this module?
In what particular scenario would it be?
__________________________________________________________________________
__________________________________________________________________________
__________________________________________________________________________
What do you think is the essence of following the correct procedures of
DOS commands in preparing bootable devices?
___________________________________________________________________________
___________________________________________________________________________
___________________________________________________________________________
DIRECTION: Read and answer the following questions carefully in two to three
sentences each number.
1. How will you use the knowledge you acquired about DOS commands in
preparing bootable devices?
___________________________________________________________________
___________________________________________________________________
___________________________________________________________________
___________________________________________________________________
___________________________________________________________________
___________________________________________________________________
WRAP-UP
VALUING
14. 2. Cite a situation in which you can apply the knowledge of understanding DOS
commands in preparing bootable devices?
___________________________________________________________________
___________________________________________________________________
___________________________________________________________________
___________________________________________________________________
___________________________________________________________________
___________________________________________________________________
___________________________________________________________________
Direction: Write T on the line if the statement is correct and F if the statement is
wrong.
___1. The Windows and other current OSs use a touch or mouse-based, graphics-
based interface.
___2. MS-DOS (Microsoft-Disk Operating System) commands used to communicate
with the operating system and other command line-based applications.
___3. When you're using Windows (like Windows 10, 8, 7, etc.), you don't require
DOS instructions, since you don't have MS-DOS.
___4. A SATA boot is a mechanism where computer hardware can be used instead of
a hard disk or a CD drive to access all the important machine booting information
and data.
___5. Make It's actually a simpler job to build a bootable USB with a command
prompt.
___6. The Type 'select partition' and hit Enter. Choosing the partition 1 for setting
up it as an active partition.
___7. Select 'create primary partition' and press Enter. Creating a main partition,
and being known as 'partition 1' by Windows.
___8. By default, the active Administrator Permission directory of Command Prompt
is on C:WindowsSystem32 >.
___9. Type the bootsect /nt64 d: and press Enter. Creating boot sector on D: drive
(USB flash drive).
___10. To install Windows from a bootable USB drive, we merely need to transfer to
flash drive the entire installation files found on the ISO image or DVD installer
POSTTEST
15. References
Google.” List of MS-DOS commands” Accessed July 20, 2020
https://bit.ly/2ZOvgrN
Google.” How to create bootable without using any software” Accessed July 20,
2020
https://www.instructables.com/id/How-to-Create-a-Bootable-USB-Drive-
Without-Using-A/
Google.” Create bootable pendrive using cmd” Accessed July 21, 2020
https://techrrival.com/create-bootable-pendrive-windows-cmd/
Google.” How to create a bootable pendrive using command prompt” Accessed
July 21, 2020
https://www.geeksforgeeks.org/how-to-create-a-bootable-pendrive-using-
cmdcommand-prompt/
KEY TO CORRECTION
Pretest
key
to
correction
Posttest
key
to
correction
1.
B
1.
T
6.
F
2.
C
2.
T
7.
T
3.
C
3.
T
8.
T
4.
D
4.
F
9.
T
5.
A
5.
T
10.
T
Activity
key
to
correction
A.
B.
1.
5
6.
2
1.
b
2.
8
7.
3
2.
c
3.
6
8.
4
3.
a
4.
7
9.
9
4.
e
5.
1
10.
10
5.
d
