2. Unit 04: Operational Amplifier Applications.
Unit 4_Module2 Matoshri College of Engineering & Research Center Nashik 2
1. Introduction to Op-Amp
2. Op-Amp as zero crossing detector (ZCD) and comparator.
3. Op-Amp as Schmitt trigger.
4. Op-Amp as V-I and I-V converters.
5. Op-Amp as Instrumentation amplifier.
6. Waveform generation using Op-Amp - sine, square, saw
tooth and triangular generator.
3. Op-Amp as zero crossing detector (ZCD)
and comparator.
Unit 4_Module2 Matoshri College of Engineering & Research Center Nashik 3
4. zero crossing detector (ZCD)
Unit 4_Module2 Matoshri College of Engineering & Research Center Nashik 4
Inverted ZCD Non-inverted ZCD
+Vsat for Vd < 0
-V sat for Vd > 0
+Vsat for Vd > 0
-V sat for Vd < 0
5. Inverted ZCD
Unit 4_Module2 Matoshri College of Engineering & Research Center Nashik 5
+Vsat for Vd < 0
-V sat for Vd > 0
6. Non-inverted ZCD
Unit 4_Module2 Matoshri College of Engineering & Research Center Nashik 6
+Vsat for Vd > 0
-V sat for Vd < 0
Draw input
output
waveform
7. Application of ZCD
1. Square wave generator
2. In the main supply synchronizing circuit.
3. Microprocessor based triggering circuit for thyristors.
Unit 4_Module2 Matoshri College of Engineering & Research Center Nashik 7
10. Inverted Comparator
Unit 4_Module2 Matoshri College of Engineering & Research Center Nashik 10
+ Vsat for Vin < Vref
- V sat for Vin > Vref
11. Thank you
Mr. C. R. Shinde
Electrical Engineering Department
Matoshri College of Engineering & Research centre, Nashik
If you have any query, ask me anytime on…… … .. . . .
cshinde58@gmail.com
chandrakant.shinde@matoshri.edu.in
9970031353
Unit 4_Module2 Matoshri College of Engineering & Research Center Nashik 11