GSW-2824P is equipped with 24 10/100/1000BASE-T Gigabit Ethernet ports, 2 extra Gigabit TP ports and 2 1000BASE-X SFP combo interfaces with the inner power system. With a total of 250 watts of PoE budget, it features high-performance Gigabit IEEE 802.3af PoE (up to 15.4W) and IEEE 802.3at PoE+ (up to 32W) capabilities on all ports.
Perfectly Integrated Solution for IP PoE Camera and NVR System
Particularly designed for the growing popular IP Surveillance applications, the GSW-2824P 802.3at PoE Switch is positioned as a Surveillance Switch for quick and easy PoE IP camera deployment with power feeding.
Contact us
Tel: +91-7875432180 Email: sales@bbcpl.in
Website: https://bbcpl.in
6. 6
Product Comparison
Model
Features
GSW-2824P GSW-2620HP GSW-2620VHP
Product outlook
Hardware
10/100/1000T Ports 24 24 24
10/100/1000T Ports for Uplink 4 N/A N/A
1000X SFP Ports for Uplink 2 2 2
DIP Switch ■ ■ Built-in to LCD
LCD N/A N/A 2-inch
Operation Mode Standard, VLAN, Extend Standard, VLAN, Extend Standard, VLAN, Extend
Thermal Fan 2 2 3 (Smart Fan control)
ESD Protection
Contact discharge of ±6KV DC
Air discharge of ±8KV DC
Contact discharge of ±6KV DC
Air discharge of ±8KV DC
Contact discharge of ±6KV DC
Air discharge of ±8KV DC
Dimensions (W x D x H) 441.5 x 207.3 x 44 mm 440 x 208 x 44 mm 440 x 233 x 44mm
Installation Desk/Rack mount Desk/Rack mount Desk/Rack mount
7. 7
Product Comparison
Model
Features
GSW-2824P GSW-2620HP GSW-2620VHP
Product Outlook
Performance
Switch Fabric 56Gbps 52Gbps 52Gbps
MAC Table 8K 8K 8K
Jumbo Frame 9K 9K 9K
PoE Specifications
PoE Standard IEEE 802.3at PoE+ IEEE 802.3at PoE+ IEEE 802.3at PoE+
PoE Ports 24 24 24
Total PoE Budget 250 watts 240 watts 300 watts
PoE Output per Port 54V DC, 32 watts max. 52V DC, 30 watts max. 54V DC, 32 watts max.
PoE Power Supply Type End-span End-span End-span
PoE Management Power Budget Control
PD Alive Check
Power Budget Control
Power Low-voltage
PSE Over-temperature
PoE Port enable/disable
PSE Port Priority
PD Alive Check
Power Budget Control
9. 9
Front Panel
24 10/100/1000BASE-T 802.3at PoE+ ports, auto-MDI/MDI-X, auto negotiation
2 10/100/1000BASE-T copper ports for uplink
2 Gigabit TP/SFP combo ports
Hardware-based DIP switch for “Standard”, “VLAN” or “Extend” mode selection
LED Indication for system power, per port PoE-in-use, LNK/ACT
A
B
C
D
C
D A B
E
E
12. 12
Product Benefits
DIP Switch for Standard, VLAN or Extend mode selection
PD Alive Check for resetting powered device’s
PoE power
Gigabit fiber optic uplink ports for long-distance transmission
Gigabit copper uplink ports for NVR and APC management
The cost-effective 24 PoE+ ports with maximum 250W PoE budget
17. 17
Product Features
DIP Switch for “Standard” Mode Selection
The GSW-2824P operates as a normal IEEE 802.at PoE+ switch in the
“Standard” mode
Standard mode supports 32W PoE power output over a distance of up to
100 meters
18. 18
Product Features
DIP Switch for “VLAN” Mode Selection
The “VLAN” mode features port VLAN isolation function
Ports 1 to 24 will isolate respectively
Ports 1 to 24 can only communicate with ports 25 to 28 (uplink ports)
19. 19
Product Features
DIP Switch for “Extend” Mode Selection
This mode makes the GSW-2824P operate as a Long Reach PoE switch
Ports 1 to 8 support farthest transmission distance of up to 250 meters
Ports 1 to 8 data rate down to 10Mbps
All ports can communicate with each other
20. 20
Gigabit SFP & TP Combo Interfaces
Gigabit TP
Gigabit speed
SFP Port
10/100/1000BASE-T
RJ45 Ports
1000BASE-SX/LX
SFP Transceiver
support
MGB Series
21. 21
DATA
TIME
Product Features
Powered Device Alive Check
The PD alive check feature is applied in Standard, VLAN and Extend modes.
After the PoE of the port is powered on, the device starts to detect
whether the port is transmitting data. If the port does not transmit data
and the duration exceeds a specific time (e.g. 180 seconds), PoE will
automatically power off and then re-power.
* The orange curve
indicates the amount of
data being transmitted
by the port
PoE On PoE On
PWR
On
3 min
Checking
data
PWR
down
PWR
On
< 180S ≥ 180S
Delay 5S
If data (< 180S) stops and
starts transmitting again,
it shows the availability of
PoE.
If data (> 180S) stops
transmitting and won’t start
transmitting again, it shows the
unavailability of PoE.
23. 23
Providing 24 802.3at PoE+ in-
line power interfaces, the
GSW-2824P can centrally
power on enterprises’ VoIP
phone system, IP surveillance
system and wireless AP
system.
IP Office Department/Workgroup PoE Switch
24. 24
The GSW-2824P 802.3at PoE+
Switch is positioned as a
Surveillance Switch for quick
and easy PoE IP camera
deployment with power
feeding.
Perfectly Integrated Solution for
IP PoE Camera and NVR System