The document summarizes changes made in developing a magazine. The initial version used a stock photo for the main article due to a lack of a model, and the fonts and layout were modified later for improved appearance. Further revisions included changing the main article photo to the final product image for ease, adjusting the layout to better resemble professional magazines, and adding more writing to avoid an article being too short.

1. Development of
the magazine

2. As you can see my finished product is on the right and the there are many differences like
the picture is completely different because I used a fill in picture to start off with because I
didn’t have a model at the present time. The writing is different because I did the fonts and
correct placement towards the end as a few ‘tweeks’ to make it better.

3. As you can see my final product is the right. I made a lot of changes throughout this page
being produced like the main article picture because I had trouble getting models for it and
using the final product picture was much easier. I also changed the layout because I
thought when I was making the on e on the left it didn’t really look like a professional
magazine so I went back and looked through my research and found that there were some
magazines structured like the one on the right so I tried that out and it looks much better. I
also added a lot more writing because otherwise it would have too short.