2. As you can see my finished product is on the right and the there are many differences like
the picture is completely different because I used a fill in picture to start off with because I
didn’t have a model at the present time. The writing is different because I did the fonts and
correct placement towards the end as a few ‘tweeks’ to make it better.
3. As you can see my final product is the right. I made a lot of changes throughout this page
being produced like the main article picture because I had trouble getting models for it and
using the final product picture was much easier. I also changed the layout because I
thought when I was making the on e on the left it didn’t really look like a professional
magazine so I went back and looked through my research and found that there were some
magazines structured like the one on the right so I tried that out and it looks much better. I
also added a lot more writing because otherwise it would have too short.
4. My double page spread needed more pictures to make it look less bland and boring, so
I added more pictures and colours (whilst sticking to the colour scheme in my style
sheet) which gave me my final product. I think it changed a lot from the initial design.
It is much more colourful and the article is much longer giving the reader more
information.
