6. Open the PowerPoint file that you will be narrating.
Click the Slide Show tab at the top of the screen.
(MS Office 2007) PPT
7. Click on the Record Narration.
And set the resolution.
8. Set Microphone level and change quality.
After that press ok.
Select Narration start from the beginning slide or first
slide.
Now you can speak for every slide step by step.
In Last there is a option for saving.
9. Open the PowerPoint file that you will be narrating.
Click the Slide Show tab at the top of the screen.
(MS Office 2010 or above) PPT
10. Click on the Record Slide Show Tab on the
navigation panel (usually from the beginning)
A Record Slide Show box will open, Click Start
Recording
The slide show will open in full screen mode
and begin recording.
11. You will also see a tool bar in the top left‐hand
side of the screen (see below).
If at any time you need to stop recording, Click
the Pause button on the recording tool button.
To begin recording again, click Resume Recording
and the audio will pick up where it left off.
12. The Repeat Button allows you erase the
current slide and restart the recording from
the slide you have erased
Once you have recorded content on a slide,
Advance to the next slide by pressing the Space
Bar.
Proceed with recording all slides and hit Esc to
end the slide show
Save your Narrated PPT on your Desktop
13. Next Step: Review Recording
Review all slides to ensure timing is associated with each
slide.
If no timing exists, audio was not captured.
To review presentation from beginning to end to ensure
audio and presentation quality, select Slide Show then
from Beginning
14. How to Convert to Video Using PowerPoint
Open the PowerPoint presentation you’d like
to convert.
Click on File.
The next step will differ based on which
version of PowerPoint you’re using. Click on
Save & Send, in PowerPoint 2010.
Export, in version 2013 and above.
Save as Movie, if using PowerPoint for Mac.
16. Select Create a Video in Windows or Save as
Movie in the Mac OS.
Proceed to the conversion process and wait
for the output video to be created.