1. 1°step:
On the desktop will be displayed the icon “Video01.mp4”.

2. 2° step:
Set the flash drive inside the computer USB port

3. 3°step:
At this point you have just to drag the file “Video01.mp4” into the USB pen driver.

4. 4°step:
Inside the pen driver the file is now ready to use.

5. 5°step:
At this point just insert the USB Flash Drive in the provided plug on the back on the
screen. Please note you should build the base on the pillar with the screen and run the
eletrical after the Flash Drive is in place. Do not build the top part of the pillar until the
video is on, because the remote signal can not go through the metal.

6. 6° step:
Press the power button on the remote.

7. Once the monitor has booted up, you will see this on the screen. Press the
right arrow on the remote to select English. Press OK on the remote to go to
the next screen.

8. This should be what you see next.

9. Press MENU on the remote to skip Channel Tuning.

10. Press left arrow on your remote to select YES.

11. NO SIGNAL should appear on the screen. Now press the yellow USB button on
the remote.

12. Press the left arrow on the remote to go from PHOTO to MOVIE.

13. Press OK on the remote to select.

14. Use arrows on the remote to select the Video file.

15. .
Then Press the PLAY symbol on the
remote to play the video full screen.

16. 1°step:
emember to select the “repeat all” function on the screen and press ok with the remote.
he video will be sected in loop mood.

17. Video in Full Screen format!