New technology for Side Stand Repossess System.

1. AUTOMATIC SIDE STAND REPOSSESS SYSTEM

2. ABSTRACT
• In this project we are going to introduce a new technique to repossess the
side stand, while the vehicle starts based when the force act on the seat. In
the existing system, the retrieve system is only based on the movement of
the front wheel or back wheel.
• The implementation of electronic sensors helps to reduce the complexity
of system made existing system. The proposed system working based, that
the force sensors placed in the down state of the seat and interlinked with
the controller and driving motors

3. • The force sensor sensed the maximum force above 40kg. It gives a signals
to the controller and starts to drive the system based on the program
dumped in the controller. The rotation of the motor is depend upon the
height of the stand. The prototype model is gives the clear out look of this
project and proceeding the process to the next level for the future role.

4. EXISTING SYSTEM
 Side Stand Retrieval System:
1. The stand is fixed in the plate with the help of spring arrangement and a
rod is used to block the stand in one position. A clutch wire is tied at the
one end of the rod and the other end of the wire is connected with the
clutch lever by means of a pulley. The movement of the rod depends upon
the lever operation. The rod moves forward when the clutch lever is
released and the rod moves backward when the lever is pressed. The
movement of the rod is carried out by means of a pulley and spring
arrangement. There are two wheels attached front and rear end of the
model.

5. 2. Sprocket side stand retrieve system retrieves the side stand
automatically if the rider forgets to lift the side stand while moving the bike.
It works based on the working principle of the two-wheelers .every bikes
transmit power from engine’s pinion to the rear wheel i.e. rotary motion of
the pinion makes the linear motion of the chain. That linear motion of the
chain is absorbed by rear wheel’s sprocket and converted into rotary motion.
That rotary motion of the rear wheel makes the bikes to move. Based on this
Sprocket side stand retrieve system is designed.

6.  Side stand Returning system based speed sensor:
1. In this mechanism consists of D.C. motor powered by motorcycles battery.
Connected to the worm and worm gear mechanism for reduction of
speed of motor and multiply the torque. The motor is actuated by the
Rotation sensor which is mounted on the front of the wheel.
2. The KMI 15/X and KMI 16/x are magneto resistive sensor modules with an
integrated signal conditioning electronics to provide a simple and cost
effective solution for rotational speed measurements. Due to their compact
design, they are simple to design-in and therefore time-to-market is
significantly reduced.

8. ADVANTAGES
 It reduce the human effort,
 It does not required any additional power sources,
 Compact in size, so there is no need of more space to initialize,
 Prevent from accidents,
 Complexity of the circuit is reduced.

9. APPLICATIONS
 It can be used in all type of two wheelers