boiling wort

1. Purpose of Wort Boiling
The purpose of wort boiling "boils" down to
these main items:
Evaporation
Removal of volatile off flavors.
Sterilization and enzyme destruction
Formation of Protein and Tannin precipitation
Extraction of hop constituents and isomerization
of hop acids
pH reduction
Increase in color
Decrease in surface tension
If youoftenoverlookyour boilingprocess youmight want toreconsider after readingthrough the informationin detail below.
Evaporation:
Often the wort is dilutedfollowinglauteringwhich must be concentratedtoreachthe set original gravity. Boilingwill oftenachievea 5-10% rate
per hour.
Removal of Volatile Off-Flavors:
Many volatile substances are present in the wort afterlauteringwhich must be evaporated. These include DMS(di-methyl-sulfide) fromthe malt,
other malt relatedvolatiles, andundesirable hopvolatiles. As overall hoparoma is volatile this is why it is addedinto the wort by late additions.
Sterilization:
The temperatures of the maltingprocess are not quite highenough toinactivatethe microorganisms andmicroflorawhich originate fromthe
malts used. Therefore,boilingfor15 minutes (minimum) is neededtoinactivateall organisms. As bacteria canquickly contaminate a goodbatch
of wort it is extremelycritical that the batchbe cooledfrom boilingandplacedin a sanitizedfermentor as quickly as possible.
Break Formation:
Hot break is a visual indicator(usually frothyfoam onthe topof thewort)which indicates that proteins are beingdenatured. Duringthis process
the proteinbecomes hydrophilic andtakes on a positive charge.Polyphenols oftenhavea negative charge andcombine with the positive protein
structures. These can oftenbe manuallyscoopedfrom thesurface ofthe boilingwort andremoved.
Hop Isomerization:
Duringthe boilingprocess hopcomponents are solubilizedandtheoils which are very harshare immediatelyevaporated. Alpha andbetaacids
are solubilizedin the wort andduringthis process the alphaacids are slowly isomerizedwhich contributes tothe bitterness of the beer (IBU
rating). Thelongerthe acids are exposedandthe higher theacidcontent at boilingtemperature,the higherthe bitterness of the beer.
Whatare the impacts of notboiling vigorouslyenough or notlong enough?

2. Lower gravity,larger fermentationvolume, insufficient hot break, poorfermentation,hazegeneration, premature chill haze formation, higher
DMS levels (unless youlike vegetables), andpoorhoputilization.
Whatare the impacts of boiling too long?
Higher gravity,lower volume, trubbreakupandredistribution whichresults in haze andflavorproblems,excess maillardreactions (bready and
cardboardflavors),harsh bitterness, andincreasedwort andbeer color.
In the endit is important tounderstandthebeer styleat handandthe timeneededat boilingto satisfyyour recipe requirements. Hope this helps...
- See more at: http://fermentationriot.com/boiling.php#sthash.qQe3OLjs.dpuf