1. S.SATHISHKUMAR
No.10 Mullai nagar, E-Mail: s_sathishkumars@yahoo.com
Near poompokar nagar vinayakar kovil, Mobile No: 9843162750
Edyarpalayam.
Coimbatore – 641025
Tamil Nadu,
India.
OBJECTIVE
To obtain a challenging position in a high quality engineering environment where my
resourceful experience and academic skills will add value to organizational operations.
Academic profile
 B.E (Part Time) in Electronics and Communication Engineering with
. 67.5% from
Government College of Technology, Coimbatore. Passed out in the year 2012
 Diploma in Electrical and Electronics Engineering with 82.5% from
Sri Ramakrishna polytechnic, Coimbatore, passed out in the year 2001
A brief on my carrier:
Having 10 years of experience in Quality field & under gone in the following
area & having good knowledge to derive them
• Product development as per APQP process & Project timelines.
• 8D approach on problem solving (customer complaint handling)
• Preparation of Control plan and participating in CFT for DFMEA & PFMEA
• New product validation.
• In-Process Quality assurance in Electronics Manufacturing Service (EMS)
through hole, SMT process.
• Goods inward Quality inspection
• Supplier Quality engineering / Assurance
• Six sigma,5s & lean manufacturing
• IPC610D, MSD & ESD implementation
• Implementation of SPC & MSA
• Constructing of mistake proof (poke yoke) systems.

2. Organization
Working as an ENGINEER in M/S. PRICOL LIMITED, COIMBATORE in Quality
Engineering deals with automotive products from Aug 05 to till now.
A brief about the company: -
• Pricol is auto ancillary part manufacturing company.
• Having its 7 units all round India.
• Its major customer is Bajaj, Maruthi, Tatamotors, General motors, Toyota, Hero,
Kawasaki, Yamaha, REML, TVS, JCB, Mahindra & Mahindra.
• Its major product is electronic instrument clusters for two wheelers, four wheeler,
Tractors & Commercial vehicles.
• Coimbatore plant is having two SMT line & one through line.
Roles & Responsibilities
In-process quality engineer:
• In charge for in-process Quality of SMT line.
• Conducting daily meeting with the Cross functional team.
• Analyzing on the defects & taking corrective action.
• Presenting the weekly / monthly performance of the line to the top
management.
• Participating in the new product introduction.
• Conducting audit on MSD & ESD compliance in the line.
• Preparation of process audit checklist.
• Planning activities with the quality inspectors.
• Attending customer complaints & giving corrective action reports.

3. • Participating in Preparing control plan & PFMEA for the new products and
initiating improvement product and process based on past failure data.
• Ensure collection data from each stage & calculating the process performance.
• Collection of past trouble data of products and providing data to design
department and initiating for corrective action at initial development stage.
• Participating in Internal PPAP run in production line and initiating improvement in
line setup for process & final inspection machine and ensuring the points are
closed before mass production.
• Participating in customer PPAP run in production line and ensuring the customer
improvement points are closed as per given time line.
• Verification of the new products as per the customer specification & ‘C’ drawing
and providing report to design team and initiating corrective action for defective
points.
• Verification of new product Bare PCB assembly for component placement as per
process standards (Flow & Reflow).
• Components used in new product are verified for capable of withstanding
selected assembly process method and make of component used is verified for
any previous complaint.
• Analysis of the Customer complaint and providing corrective action in the 8D
Reports.
• Conducting process audit at PCB assembly vendor place.
Training undergone
 Internal auditor - ISO/TS 16949
 MSA Study
 5’S and Kaizen techniques
 ESD Awareness
 SMD technology.
Previous Organization (1)
 Worked as Assistant Technical Engineer Production/Service of Nestling
Techno craft limited Coimbatore from JAN-2004 to AUG 2005.
Major products
Speed controller, Counter, Stop motion, Timers Production &
Servicing.

4. Roles & Responsibilities
• Trouble shooting of soldering defects.
• Monitoring & Minimizing the in process rejections.
• Decision making on acceptance & rejection on soldering defects.
• Analyzing the defective component / Product and find out the root cause
• Identification of non confirming components / Products
• Planning the production for the month.
• Planning the components as per the production plan for the month.
• Stock verification in the store.
• Testing the products as per the field condition and the passing the products at
final inspection.
Previous Organization (2)
Worked as Apprentice trainee at TAMILNADU ELECTRICITY BOARD,
Coimbatore from Jan-2003 to Dec -2003
.
Under gone training on
• Testing of the Single-phase & Three phase Analog Energy Meters.
• Testing of H.T, L.T.C.T, L.T line three phase Digital Energy Meters.
• Servicing Analog Single-phase Energy Meters.
• Testing of Overload relay, Earth fault relay, used in the circuit breakers for
substation, both analog and digital relays.
• Panel board wiring for the Vacuum Circuit breakers, Oil circuit breakers, with
overload relay and earth fault relay.
• Testing of Current transformers used in L.T & H.T lines.
• Testing of the Power Transformers & 11KV transformers.
• Panel board wiring of H.T & L.T Energy Meters.

5. • Erection of New Batteries in the substation.
Previous Organization (3)
 Worked as Service engineer at PRAGI ELECTRONICS, Coimbatore from
May-2002 to Dec-2002.
Roles & Responsibilities
• Servicing &Trouble shooting.
• Monitoring & minimizing the in Breakdown failures.
• Decision making on acceptance & rejection on soldering defects.
• Analyzing the defective component / Product and find out the root cause
• Identification of non confirming components / Products
Previous Organization (4)
Worked as Technical Assistant at ENCON ENGINEERING, Coimbatore
from May-2001 to April-2002.
Roles & Responsibilities
• Erection of panel boards for the H.T lines in Textile Mills, Hatcheries, and
Windmill.
• Panel board wiring with
 Meters for measuring the voltage, current, Power factor.
 Relays for the Earth Fault indication.
 Miniature Circuit Breakers for the over load tripping.
 Automatic Power factor control panel wiring.
• Erection work of 11KV & 22KV Transformers for Windmill.
• Industrial Lightning wiring for Textile mill, Hatcheries.
• Energy Audit for the Hatcheries , Textile mills for improving the Power factors,

6. Personal strength
 Fast Grasping
 Commitment in achieving the goal
 Problem solving capacity
 Adaptive to change
 Self motivated and learning agility
Personal details
Date of Birth : 05.06.1983.
Languages Known : Tamil & English.
Passport Details : G1105349 Valid till 18 Dec 2016
Declaration
I hereby declare that the above information’s are true to the best of my
knowledge and belief.
Yours faithfully,
Place :
Date :
(SATHISHKUMAR.S)

7. Personal strength
 Fast Grasping
 Commitment in achieving the goal
 Problem solving capacity
 Adaptive to change
 Self motivated and learning agility
Personal details
Date of Birth : 05.06.1983.
Languages Known : Tamil & English.
Passport Details : G1105349 Valid till 18 Dec 2016
Declaration
I hereby declare that the above information’s are true to the best of my
knowledge and belief.
Yours faithfully,
Place :
Date :
(SATHISHKUMAR.S)