The document discusses different concrete finishes that can be applied to buildings. It describes how concrete finish protects buildings from the environment and improves aesthetics. It lists various formed and unformed finishes like smooth, exposed aggregate, brushed hammer, blasted, and acid washed finishes. Special finishes like glass fiber reinforced concrete and textile concrete are also mentioned, which provide strength and allow for detailed ornamentation and textures. These finishes enhance the appearance and durability of concrete structures.

1. Concrete Finishes
1) FAIZAN
2) HUMAIRA
3) MOUNIS
4) SAMREEN
5)MOOMIN
6) SAMIN

2. • Concrete finish is installed on the exterior or interior of a building to
protect it from environmental conditions and improve the aesthetics
of the building

3. Preparing the concrete
• Measurement
• Compaction
• Finishing
1)Initial
2)final

4. Concrete pavers

5. Formed and Unformed finishes

6. Formed Surfaces In Concrete
Smooth Finish
Exposed aggregate Finish
Brush hammer Finish
Blasted Finish
Acid wash Finish

7. Smooth Surfaces Finish

8. Exposed aggregate Finish

9. Brush hammer Finish

10. Blasted Finish

11. Acid wash Finish

12. Unformed finishes
• Scratched finishes
• Floated finishes
• Broomed finishes
• Trowelled finishes
• Non slip finishes

13. Scratched finish

14. Floated finish

15. Broomed Finish

16. Trowelled finish

17. Trowelled Finish

18. Broomed finish

19. Non Slip finish

20. Sand paper and its grades

22. SPECIAL FINISH
• GLASS FIBRE REINFORCED CONCRETE(GFRC)
• Reinforcement in the form of thin fibers of glass
• Durable
• Detailed ornamentation

23. • Damaged in alkali environment
• Usually in the form of thin architectural claddings
• Counter tops

24. Soccer stadium, Johannesburg

25. TEXTILE CONCRTE
• CARBON FIBERS AS A GRID
• Stronger than GFRC
• Different textures
• Per cast panels

26. Photo concrete

28. Photoengraving

30. 3D Concrete

33. Artico

35. Translucent Concrete