This document provides instructions for setting up a Garmin eTrex 10 GPS device. It explains how to navigate the menu system using the rocker button and center button to select options. It outlines the initial setup steps, including selecting between GPS or demo mode, language, battery type, and USB mode. It then describes how to adjust settings like backlight timeout, contrast, map orientation, data fields, track settings, recording method, units, time, time zone, position format, heading, and north reference. The document aims to guide users through the full configuration of this GPS device.

1. PREECHA BOONKHAW
FACULTY OF GEOINFORMATICS
BURAPHA UNIVERSITY
CHON BURI
THAILAND
20131
Preechap@buu.ac.th

2. Introductions About GPS
Etrex 10

3. Join or
Rocker
Zoom back
Out
Zoom
in
Power On/Off Light
Menu
Display

4. USB DATA
LINK
Battary

5. GPS Etrex 10 and Devise

6. How to setup in GPS Etrex
10

7.  When you power on This appear in Display
 Click at Rocker button to up or down and click
central for select

8.  When you click select you will see Display This
here

9. When you click select with Joint button
you will see Display This here
Sattellite System Can you select GPS or Demo

10.  Next WASS/EGNOS for Use in USA and
EUROPE

11.  language Can select 3 language English
,Thai,Indonesia

12.  Battery type
 USB Mode When you connect
with computer
 When you Setup finish you
press back button at GPS
press

13. Display

14. Backlight Timeout
when you use light press power
press one
Adjust Contrast press Jiont button
move righ- lift finish press back
button

15. Map

16. Orientation
North up
Track up

17. Data Fields

18. Advance Map setup

19. Track press Jion button to select

20. Track log Can you select
Do Not Record
Record. Do not show
Record.Show On Map

21. Record Method
Distance
Time
Auto

22. Distance

23. Reset

24. Page Sequence

25. Select appear in Display
Can you select

26. Units

27. Time

28. Time Zone

29. Position Format
UTM / UPS ------Map Datum

30. Degree Minute Second

31. Heading

32. North Reference
True,Magnetic,Grid,User
Go To Line
Bearing

34. THANK YOU