drive-and-control-automation-system.pptx

•Download as PPTX, PDF•

0 likes•70 views

A drive and control automation system is designed for Helicopter Main Gear Box (MGB) load test rig. The test rig consists of test rig structure in which the MGB of Advanced Light Helicopter (ALH), drive motor, adapter gear boxes are installed. Supplying all hardware & software required for the drive and control automation system for the test rig. The test rig is a mechanical closed loop system in which the rated speed of MGB is achieved by motor through lower adaptor gearbox. In order to achieve various loads such as thrust loads, torque load and hydraulic pump loads the hydraulic power packs with actuators will be employed. The hydraulic power packs consist of motor pumps, various process switches, sensors valve, etc. which facilitate remote operation of DAS (Data Acquisition System) of the test rig. An AC alternator which is mounted on MGB is to be loaded through resistive load bank with contactor panel.

Engineering

A drive and control automation system is designed for Helicopter Main Gear Box (MGB)
load test rig. The test rig consists of test rig structure in which the MGB of Advanced Light
Helicopter (ALH), drive motor, adapter gear boxes are installed. Supplying all hardware &
software required for the drive and control automation system for the test rig.
The test rig is a mechanical closed loop system in which the rated speed of MGB is achieved
by motor through lower adaptor gearbox. In order to achieve various loads such as thrust
loads, torque load and hydraulic pump loads the hydraulic power packs with actuators will
be employed. The hydraulic power packs consist of motor pumps, various process switches,
sensors valve, etc. which facilitate remote operation of DAS (Data Acquisition System) of the
test rig. An AC alternator which is mounted on MGB is to be loaded through resistive load
bank with contactor panel.

 Temperature module/card
 Digital Input(24Vdc) module/card
 Digital output with potential free SPDT relay board
 Vibration input (IEPE) module/card-Input Type
 Analog input – Voltage module/card
 Analog input – Current module/card
 250KW AC motor with encoder
 Emergency Stop Push Button

Items Name Specifications
250KW AC motor with encoder TYPE- 3 Phase TEFC squirrel cage Ac induction moter, suitable for
inverter duty confirming to IS/IEC standards
Blower Motor Blower motor 1 phase/3 phase for motor cooling
AC Variable frequency drive(VFD) Application- Variable frequency drive Required for above 250 kw
moter make siemens/ABB/PARKER,
MCCB 4 Pole, 600A MCCB for main incoming supply, Breaking Capacity 100
kA with Rotory handle
AC Line Reactors Phase AC line reactors for 250kW VFD
MPCB Motor circuit breaker, 3P, 415VAC 1-1.6 A, thermal magnetic, spring
terminals
VFD Remote Display Remote display for VFD with connecting cable

Similar to drive-and-control-automation-system.pptx

DIESEL GENERATOR AND ONLINE UPS By Accurate Power Systems

IndiaMART InterMESH Limited

Ca128

asd kazemi

This is a presentation of research in the field of automation of steam turbines power upon 200MW of the group of Process Automation at Institute Mihajlo Pupin, Belgrade. In short, this is a model of steam turbine, which is used during the development of control algorithms steam turbine, power plant personnel training and optimization of steam turbine operation. The model has been adapted to work in real time and is applied in the form of hardware in the loop (HIL) simulation.

One Solution for Simulation of Steam Turbine Power Upon 210MW

pupin_proces_automation

Automation of cstr using microcontroller gp11

Amitesh Kumar

Dgps control system

Aryan Raj

Advanced motion controls ab100c200

Electromate

This practical temperature controller controls the temperature of any device according to its requirement for any industrial application. It also displays the temperature on an LCD displays in the range of –55°C to +125°C. At the heart of the circuit is the microcontroller from 8051 family which controls all its functions. It is important to control the speed of DC motor where precision and protection are essence. Here we will use a technique called PWM (pulse width modulation) to control the speed of DC motor.

Industrial Temperature Controller using Microcontroller

Edgefxkits & Solutions

Intelligent mcc

Praveen Patil

Bharath Resume

Bharath Kumar Vuppala

Amiri Guard Starter panels Presentation Rev-1 Dt16-11-2014

Sheikh Imran

Advanced motion controls ab200a100

Electromate

Googol pta780 g1 260kw 325kva

Mark Wang

Googol pta780 g1a 200kw 250kva

Mark Wang

Catalog Biến tần Frenic Multi Fuji - Beeteco.com Beeteco.com là trang mua sắm trực tuyến thiết bị điện - Tự động hóa uy tín tại Việt Nam. Chuyên cung cấp các thiết bị: Đèn báo nút nhấn, Relay, Timer, Contactor, MCCB ELCB, Biến tần, Van, Thiết bị cảm biến, phụ kiện tủ điện, .... Từ các thương hiệu hàng đầu trên thế giới. www.beeteco.com @ Công ty TNHH TM KT ASTER Số 7 Đại Lộ Độc Lập, KCN Sóng Thần 1, P. Dĩ An, Tx. Dĩ An, Bình Dương www.facebook.com/beeteco Tel: 0650 3617 012 DĐ: 0904 676 925

Catalog Biến tần Frenic Multi Fuji (Fuji Electric) - Beeteco.com

Beeteco

Ground Power Unit(GPU) is used to give the power to the aircraft which is in the ground during the maintenance and repair work the GPU is used to power up the system externally, This GPU is having Dual output one is 45Kva AC power that consist of L-L 200V and L-N 115V ,150A and 400HZ four wire system another one will be DC 28.5 V 800A two wire system and it will deliver the two output simultaneously up to maximum range of 45 KVA, the following components are used to design the GPU. Overview: A diesel engine/electric motor coupled with highly reliable alternator provides a perfect output to your aircrafts. With a touchscreen control panel and interactive GUI, this GPU is easy to operate and effortless to maintain. Our AC Ground Power Unit can be supplied with additional 28.5V DC module for obtaining commercial power voltage for tools, appliances. etc. during aircraft maintenance. it is a feature-rich software built for remote operations of GSE with parameter details, fault alarms, alerts and periodic maintenance schedule. Application GPU is used to support the aircrafts in ground to maintain and trouble shoot its basic testing with out start up their engine, This will be designed on the required power of aircraft and this whole system is operated by diesel engine , The system is mounted on the portable moving trolley to provide the easy accessibility all over the ground which is towable with necessary braking system.

45 KVA Ground Power Unit for Raphael .pptx

Neometrix_Engineering_Pvt_Ltd

Automotive days 2014 ts-54 xx-v1.1 (Full Version)

Interlatin

Abstract— In this project, the boost-inverter topology is used as a building block for a single-phase grid-connected fuel cell (FC) system offering low cost and compactness. In addition, the proposed system incorporates battery-based energy storage and a dc–dc bidirectional converter to support the slow dynamics of the FC. The single-phase boost inverter is voltage-mode controlled and the dc–dc bidirectional converter is current-mode controlled. The low-frequency current ripple is supplied by the battery which minimizes the effects of such ripple being drawn directly from the FC itself. Moreover, this system can operate either in a grid-connected or stand-alone mode. In the grid-connected mode, the boost inverter is able to control the active (P) and reactive (Q) powers using an algorithm based on a second-order generalized integrator which provides a fast signal conditioning for single-phase systems. Design guidelines, simulation, and experimental results taken from a laboratory prototype are presented to confirm the performance of the proposed system.

Single phase grid connected fuel system based on boost inverter

Rohithasangaraju

JVL AC-Servo Motor with Integrated Driver MAC50, 95, 140 and 141

Electromate

AMTECH is the leading Manufacturer and Supplier of Active Harmonic Filters based in Gujarat, India. We provide advanced technology power quality solutions to avoid their ill-effects on capacitors, transformers, cables, and switchgears. Get In Touch Visit: https://www.activeharmonics.com/ CONTACT INFO Address: E-6, GIDC Electronics Zone, Gandhinagar - 382 028, Gujarat , India. Phone: +91-79-23289101, 23289102, 23289103 E-mail: info@amtechelectronics.com

Axpert hivert series mv drive

Amtech Electronics (India) Limited

BatteryCharger

raju_megamic

Similar to drive-and-control-automation-system.pptx (20)

DIESEL GENERATOR AND ONLINE UPS By Accurate Power Systems

Ca128

One Solution for Simulation of Steam Turbine Power Upon 210MW

Automation of cstr using microcontroller gp11

Dgps control system

Advanced motion controls ab100c200

Industrial Temperature Controller using Microcontroller

Intelligent mcc

Bharath Resume

Amiri Guard Starter panels Presentation Rev-1 Dt16-11-2014

Advanced motion controls ab200a100

Googol pta780 g1 260kw 325kva

Googol pta780 g1a 200kw 250kva

Catalog Biến tần Frenic Multi Fuji (Fuji Electric) - Beeteco.com

45 KVA Ground Power Unit for Raphael .pptx

Automotive days 2014 ts-54 xx-v1.1 (Full Version)

Single phase grid connected fuel system based on boost inverter

JVL AC-Servo Motor with Integrated Driver MAC50, 95, 140 and 141

Axpert hivert series mv drive

BatteryCharger

More from Neometrix_Engineering_Pvt_Ltd

The purpose of Integrated Test Rig is to assess performance of Fuel Cooled Oil Cooler (FCOC), HP Pump & Oil Pump prior to fitment on Aero Engine. The design of rig is such that it can cater to individual testing of individual LRU or integrated testing of all the LRU’s installed together (in combination). The pumps under test shall be mounted directly on the high-speed electric motor flange through adapter quill shaft assembly. Variable speed drives shall be provided for all the pumps under testing. The rig shall cater for real time monitoring and recording of performance parameters. KEY FEATURES Key features of this Rig are as follows: - 1. It has separate power packs for both the fluids i.e. ATF Power pack for ATF Fluid, OX Power Pack for OX-27 Oil. 2. This Rig is designed for high temperature Application. It works on 200 deg. Celsius. 3. Two Dedicated heating systems have been integrated with this Rig to raise the temperature of OX-27 Oil. 4. In both Power Packs insulated tanks are being used, which is good for safe operation and safety of operator. 5. This rig is designed in such a way, that it’s OX power pack is in its left side, ATF Power pack is in right Side and test bed is in Centre. 6. A big Test bed have been provided for smooth testing of UUT’s. 7. All piping is being insulated for safe operation and maintenance. 8. It comprises with DAQ System. 9. This rig can test several components at a time, together or separately. Application All the UUT’s are mounted on HTFE-25 Engine after successful performance testing of those. Application of this Rig are as follows: - 1. One of its application is to test LP Pump of HTFE-25. It is designed for functional testing of LP Pump. a. Free Flow Test b. Load Test 2. It is used to test HP Pump of HTFE-25. It is designed for functional testing of HP Pump. a. Free Flow Test b. Load Test 3. It is used to test Oil Pump of HTFE-25. It is designed for functional testing of Oil Pump. 4. It is used to test FCOC of HTFE-25.

Integrated Test Rig For HTFE-25 - Neometrix

Neometrix_Engineering_Pvt_Ltd

Neometrix Optical Balloon Theodolite • In common with other land based balloon theodolites the Neometrix theodolite OT-NEA3060 has a telescope with a bent optical axis. A secondary wide-angle telescope using the same eyepiece is selectable with a mirror. There are two pins on the tip of this instrument that serve as contacts to an attachable battery case. The Photo shows the theodolite with the battery case attached. • In the photo above you can see the bubble level directly under the two switches. The switches control illumination of the reticule and the circles. • You can see the accessories for this instrument, filters for the eye piece, the key to the case, lens shade, lens cap and a plumb bob. Also note the hook for hanging a stopwatch and the magnifying glass to assist reading the circles. • Distinguishing features of the OT-NE-A3060 theodolite are the use of a Pentagonal Prism in the bent axis telescope, which allows for better stability of the optical alignment, a closed circle design for durability, two levels of magnification offering wide and narrow fields of view (accomplished with a switchable finder scope using the same eyepiece with two objectives) and a lined gradicule supporting the tail method of altitude determination. The placement of the azimuth and elevation circles directly above each other as well as the use of Micrometer drums facilitates rapid determination of Azimuth and elevation directly to the 10th of a degree.

Neometrix Optical Balloon Theodolite.pptx

Neometrix_Engineering_Pvt_Ltd

An Eddy current dynamometer is an electromechanical energy conversion device, which converts mechanical energy to electrical energy. It fundamentally uses Faraday’s Law of electromagnetic induction as its working principle. In this system we test different ranges of engines RPM, Torque in N-m, and Power. And parameters will be shown in panel. Power- up to 200 KW Torque- 1780 N-m Engine for testing with a range of 1500- 2000 rated rpm. Engine monitoring system: Control panel with digital meters, oil pressure, lube oil temperature, water temperature, Engine RPM. Engine parameter recording: A computer based data logger to record engine control parameters. A printer to be provided for printout report of all engines parameter. And parallel we can record engines parameter like Lube oil pressure, Engine temperature, water temperature etc. Mechanical Dimensions:- • Overall Size: 2000 mm x 850mm x 1350 mm • Centre Height: 900 mm • Inlet Piping: 2” • Outlet Piping: 2” • Calibration Arm Length from centre: 1000 mm • Cooling Water Requirement (Dynamometer Inlet) Pressure: 1.0-2.0 bars • Temperature: Less than 40°C. • Cooling Water Flow (Dynamometer Inlet): 12500 LPH • Type of Lubrication: Grease (Inner earing), Oil (Outer Bearing) Electrical: • Supply Voltage:240 volts ± 10% AC, 50 Hz • Separate Earth should be given to the system. • Maximum Excitation: Internally set in the instrument depending on the capacity of Eddy current dynamometer. Generally, 3 To 5 Amps D.C. • RPM: This is displayed by a 4 digit display. This displays Motor/dynamometer rpm. • Accuracy: ± 1 rpm. Environmental: i) Temperature: 5 to 550C maximum ii) Humidity: R.H. 95% maximum Application: Dynamometer system will test the engines parameters RPM, Torque, Power, Lube oil pressure, temperature, water temperature and result will be shown in control panel with digital meters.

Dynamometer Engine Test Rig for engines parameters RPM

Neometrix_Engineering_Pvt_Ltd

Portable Barometer uses a silicon resonant pressure sensor DPS 8100 producing a pressure reading in pressure measurement units and pressure altitude. It also has a Comptek 10.1" tablet, mounted on an Aluminum enclosure. It can be used as a hand-held indicator tablet or instrument. The instrument can also communicate through a USB connector to extract out logged data. This USB port should be strictly used for App-related data transfer only. The instrument has an in-built tablet which should be used only for the TERPS App. The tablet is provided with a compatible charging adapter. This should be used only to charge the instrument. The instrument should be used within the operating and maximum safe working pressure conditions. Refer to the specification section in this manual for the details. Sensor Port: Keep the sensor port clean all the time. Protect the sensor against moisture, water, dirt and dust particles. Do not block the sensor with any object as it may result in inaccurate reading output. For better and accurate readings, keep the sensor port away from continuous pressure changing areas (for example, should not be close to AC, Fans, table fans etc.). During pressure measurement, the device should be placed on the table or held in the orientation. In case of hand-held application, hold the instrument as shown in Figure 3. While holding the unit, ensure that the hand does not block the sensor port. USB Port: This USB Port is specifically for extracting the exported data from the TERPS App. Do not use this port for any other activity. Use this port only for App-related data transfer. When not in use, close the USB port using the rubber cap.

Portable Digital Barometer for Indian Air force

Neometrix_Engineering_Pvt_Ltd

PROJECT: TEST RIG FOR HYDRAULIC FLUID (A3987) The test rig is used to test the anti-wear properties and the aging behaviour of hydraulic fluids under defined and reproducible conditions. For this purpose, a vane pump Vickers 35VQ25A-11*20 for ASTM D6973-2014 and a Bent Axis type axial piston pump A2F10 for JCMAS P 045 are used as test objects. The subsequent investigation of the wear inserts and oil condition then allows conclusions about the performance of the tested fluids, especially their ability to avoid wear and resist oxidation. The modern and ergonomically designed test rig meets all the specifications of the European Machinery Directive 2006/42/EG to a high standard or equivalent Indian Standard. The test rig is used to determine the wear characteristics and oxidation/ aging of non-petroleum and petroleum hydraulic fluids. For this purpose, a rotary vane pump generates a test pressure under specific boundary conditions. The result obtained is the total mass loss from the cam ring and the ten vanes (ASTM D6973-2014) after the test. For indicating oxidation stability or aging behaviour of hydraulic fluids this test bench, uses a bent axis pump A2FO10 and a pressure relief valve DBDS 10 K1X/400V as load at high temperatures. The test takes place under the influence of air and a copper catalyst. This procedure allows for an accelerated aging rate using a real hydraulic component. The test rig parameters meet the specifications according to ASTM D6973- 2014 and JCMAS P 045. Additionally, it is capable of carrying out the evaluation of hydraulic fluid for frictional characteristics and energy efficiency performance under indigenously developed and industrially simulated test methods by varying load, speed, temperature, pressure, flow rate etc.

TEST RIG FOR HYDRAULIC FLUID (A3987) - NEOMETRIX DEFENCE

Neometrix_Engineering_Pvt_Ltd

Hydraulic Loading System Serves the following purpose during engine run:: Loads the Engine mounted Hydraulic Pump by Varying the Outlet restriction to achieve specific Flow Rates at specified Pressure Range. Carry out Cyclic Load Testing of the Hydraulic Pump. There are six different module which after assembly become complete system. Modules are following: Oil tank module Air Regulation module Inlet module Outlet module Drain module Loading valve module Heat exchanger module Portable oil filling module KEY FEATURES Design Pressure : 340 kg/cm2 Working Pressure : 270-295 kh/cm2 Working Flow : 20-210 LPM Hydraulic Oil : MIL=H-5606/FH-51 Viscosity : 15CST @ 40°C Density : 0.8735 AT 15.6°C Tank Capacity : 175 Liters Tank Max. Pressure : 10 kg/cm2 Max. Temp. at Pump Outlet : 100°C Max. Temp. at Pump Intel : 80°C

Hydraulic Loading System - Neometrix Defence

Neometrix_Engineering_Pvt_Ltd

Hydraulic Hose Leak Testing (Test Rig is Pneumatic Hydraulic).pptx

Neometrix_Engineering_Pvt_Ltd

The Test Rig is self-contained, Electro Hydraulic Test Rig. Safety & user Friendliness are the key features of the provided Test Rig. The Test Rig provided has been designed to address all the requirements testing of 130 LPM Pump. The brief spec and tests of this pump is given below as: The brief specs of the pump- Rated Pressure = 270 bars Rated Flow = 130 LPM at 270 bar Rated Speed = 6000 RPM Application The Test Rig provided has been designed to address all the requirements testing of 130 LPM Pump. Key features  Drive System with Gear Box Lube Oil System  High Pressure System for Pressure Proof Testing  Low Pressure System for Functional Test  Control and Indicator Panel  Data Acquisition System.  The test rig is design to work up to 120°C.  Two moog make servo valves have been provided in Rig for Cyclic Test.  Cooling System: We are using water as the medium for the cooling purpose, with the help of Heat Exchanger. Total three heat exchanger has been provided in system.  Filtration: Proper filtration has been provided and the filters have electronic clogging indicators.  The rig is developed for Hydraulic Oil (MIL-H- 5606E) or equivalent.  Three SS 304 Reservoirs of oil capacity 90, 225 and 50 liters have been provided with all related fittings. Safety Interlocks  The Pump will not start in case the Reservoir oil level is low/ high.  The Pump will stop/ will not start, in case the oil temperature goes beyond a set limit.  There would be alarm and indication, in case any abnormality happens.  In case any of the filters are clogged, there would be alarm; Indication and the Test rig will stop.  It is also independent of the Computer automation system.  Computer: The Rig Diagnostics/ Monitoring & Recording are implemented Through the National Instruments data acquisition System and PC. The customized Software is implemented in Lab View.

Test Rig for 130LPM Pump of LCA- Neometrix

Neometrix_Engineering_Pvt_Ltd

This rig is designed for testing Ejection Release Units (ERU119 & ERU120) which are tested for Hook Proving Loads. These units are tested for load deformation and the test results will automatically come out as OK/NG on the basis of pre-fed Deformation & Load settings in the system. A self-contained Test Bench is provided to test both types of units. Mechanical System:  Independent Bench for ERU119 & ERU120 is provided.  Horizontal Loading Facility for the units is provided.  Custom made fixture for holding the units, and unit profile will be accommodated in the fixture so that the unit is not damaged during testing.  LVDT with magnetic contact is provided for displacement measurement.  Both systems have Load Cells with in-situ calibration facility. In- situ calibration will be done automatically.

Lock Loading Test Rig (ERU119 & ERU120) .pptx

Neometrix_Engineering_Pvt_Ltd

The Following Test Bench is for Testing Parameters of Starter Generator of Advanced Light Helicopter (ALH). The Test bench has following four tests :- 1) Generator Mode Load and no Load Test. 2) Starter Mode Load Test. 3) Vibration Measurement Test. 4) Concentricity And Bar to Bar Difference Measurement Test. Test Bench Description: This test will have a Combination of AC Motor of 5000 RPM rigidly Coupled with the Dual Output Gear Box having Ratio of 1:3 to give maximum speed of 15000 RPM at output . The output is to accommodate the shaft of 6KW Starter Generator With Suitable Clamping On the Common Flange. Resistive Load Bank with good Cooling Facility provides load to the Starter Generator in steps of 0,50,100,150 and 200 Amp with additional loads of 300A , 375A and 450 Amp .Load is selected from the control panel through selectable switches. A.C. Drive ABB make is also provided for this Test with Control signals From control panel.

starter-generator-test-bench-Catalog.pptx

Neometrix_Engineering_Pvt_Ltd

Printed Circuit Boards (PCBs) need to go through a series of extensive tests and inspections at each step of the manufacturing process to assure the products meets or exceed specifications. Reliability decreases exponentially in electronic components due to heat problems. Thermal Air series of thermal testing cycling test systems helps manufacturers design ICs, chips, and PCBs for superior thermal performance. Specifications Neometrix Thermal Tester is Temperature Forcing Systems and environmental test chambers provide quality assurance through temperature cycling testing. We have used standard highly reliable FLIR camera for thermal scanning. Thermal Tester is a mobile thermal testing solution capable of environmental stress testing throughout the semiconductor design, manufacturing, and back-end test processes. Application Printed Circuit Boards (PCBs) need to go through a series of extensive tests and inspections at each step of the manufacturing process to assure the products meets or exceed specifications. Reliability decreases exponentially in electronic components due to heat problems. Thermal Air series of thermal testing cycling test systems helps manufacturers design ICs, chips, and PCBs for superior thermal performance. Key features Thermal Tester is having following major features: (a) Wide angle (min 50 degree horizontal) Infrared imaging camera with 640X480 pixels resolution or better. (b) Thermal analysis software for hotspot and other faults detection. (c) Automated enclosure with PCB test fixture for testing of PCB of dimension 16X16 inch or better. (d) Power supply module with minimum eight relay to provide 230VAC/3A/50Hz and 28VDC/5A or better. (e) Temperatures measurement range: -20 to 200 degrees Celsius.

Printed Circuit Boards (PCBs) PCB-thermal-test-bench.pptx

Neometrix_Engineering_Pvt_Ltd

Optical test equipment or optical measurement equipment are used to measure and characterize the physical properties of light. The insatiable demand for higher capacity in communication networks has fueled the need for highly precise optical test solutions. In addition, precision optical measurements are essential to optical research applications for Defence communication, mobile communication, environmental sensing, and consumer products. R&D engineers, academic researchers, manufacturing engineers, and field service personnel depend on precision optical test equipment to ensure design and performance specifications, production quality, and network health. For more than 10 years, Neometrix has delivered quality, consistency, ease of use, and market leadership for optical test applications.

Optical-test-bench-for-pcb-and-optic-testing.pptx

Neometrix_Engineering_Pvt_Ltd

Printed circuit board (PCB) functional tester performs critical validation process performed on manufactured PCBs to verify the board’s functionality meets the original design requirements and specifications. Thorough functional testing helps ensure the reliability and performance of PCBs before deployment. Testing coverage- Validate continuity and isolation: Verify electrical connectivity and isolation between traces using in-circuit testing (ICT) and flying probe testing to check for opens and shorts. Confirm impedance: Match measured impedance of traces and interconnects to design values to prevent signal degradation. Verify power integrity: Check PCB operation under different power conditions to avoid errors from insufficient power delivery. Assess signal integrity: Examine signal quality under high-speed conditions to prevent distortion and interference. Test functionality: Stimulate the PCB with input signals and power to check outputs match expected responses based on design. Confirm robustness: Subject PCB to temperature cycling, vibration, shock to validate resilience and durability. Execute regression testing: Retest functionality after modifications to ensure no side effects.

Printed circuit board (PCB) FUNCATIONAL TEST BENCH.pptx

Neometrix_Engineering_Pvt_Ltd

The proposed Mobile Test Facility (MTF) is a roadworthy self-sufficient test facility for testing of “Expandable Turbo Propulsion system (Expandable Engines) of up to 450kgf class” and is devised for Field Tests at various altitude sites in India ranging from sea level to High Altitudes. “MTF” is proposed with modular design concept, where in each module is built and rigidly installed on a trailer with pre-designated system based on each modules infrastructure functionally required. It consists Four Trailer mounted Modules- 1. Mobile Utility Trailer Module 2. Mobile Control Cabin Trailer Module 3. Engine Test Section Unit Trailer Module 4. High Pressure Mobile Compressor unit Module (Under GTRE Scope)  Operational Environment :- 1. Test Site Altitude: - From10 m above MSL to 4522 m above MSL 2. Test Site Temperature: -20°C to +50°C 3. Test Site Atmospheric Pressure: 0.57 Atm to 1 Atm 4. Test Site Humidity: 20% to 80% Electrical General Requirements: a. Voltage: 415 v ±10%, 3 phase. b. Frequency: 50 hz +3%, -6%. c. Aux voltage: 110 VAC (normal supply). d. UPS voltage - 230 VAC for PLC Panel. e. 24 V DC Control Circuits. f. Main switch with emergency stop function. g. Illuminated double push-button for ON/OFF. h. Blue illuminated push-button for fault indication and acknowledgement. i. Control of the test rig and the test programs via operating computer.

Mobile Test Facility (MTF) - Neometrix Defenece

Neometrix_Engineering_Pvt_Ltd

MODERN UNIVERSAL AUTOMATIC TEST EQUIPMENT(MUATE) is an equipment which is used to perform automatic measurements on the device, known as unit under test (UUT), device under test (DUT), and evaluate the test results. An MUATE has a computer controlled system that contains many complex test instruments that are capable of automatically testing and diagnosing faults in intricate electronic components, PCBs, Integrated circuits. It can test a large range of electronic devices and systems from ingenious components like resistors, inductors, capacitors to complex compiled electronic systems. To accomplish this intention, we are harnessing JIG/Fixture/ITAs. MUATE systems designed to decrease the amount of test time needed to verify a particular PCB, Component, LRU. MUATE contains Five subsystem (a) JTAG (b) Bed of Nails (c) Boundary scan (d) Data acquisition system (e) Controller JTAG helps users with PCB debugging, prototyping, testing and repairing. By using the Bed of Nails (ICT-In circuit testing) we can check for short, open, resistance, capacitance, inductance, tracks, and many more Components, with the help of boundary scan Test device pin signals or internal signals can be monitored in real-time without interfering with normal operation.

modern-universal-automatic-test-equipment.pptx

Neometrix_Engineering_Pvt_Ltd

The HYDRAULIC REFILLING TROLLEY is specially designed and developed for the GROUND REFILLING of oil in aircraft systems. It is used for refilling oil in aircraft system through the supplied pressurized hydraulic oil from the trolley to the aircraft, comprising of a pressurized reservoir, with filtered and de- aerated fluid at flow and pressure characteristics required for testing. The Trolley is suitable for wide range of fighter aircraft, military transport aircraft, and helicopters used in Indian Air Force. This Hydraulic refilling trolley is basically designed for charging Engine oil (Turbonyc Oil-210,Viscosity- 3.7 cst at 100 Deg Celcius )to AIRCRAFT. Compressed nitrogen is fed from air bottle (BL) along the flexible hose ,through shutoff valve reducers for building up pressure inside the tanks. The safety valve releases compressed nitrogen into the atmosphere in case pressure exceeds set value.The working fluid displaced by nitrogen pressure from the tank passes through filters and used for cleaning the fluid of mechanical admixtures and gets through aircraft charging adaptor to the AIRCRAFT.

HYDRAULIC REFILLING TROLLEY - NEOMETRIX DEFENCE

Neometrix_Engineering_Pvt_Ltd

The Neometrix Engineering Series NE-A0107 Universal Hydraulic Test Stands are designed for testing all kind of hydraulic components in various aircrafts & helicopters of Western/ Russian origin like SU-30, Jaguar, Mirage etc. This is a WORK HORSE required in every ground support & testing establishment. Virtually any hydraulic component can be tested on this Test Stand by making right hydraulic & electrical connections. It is also very popular with aviation R&D and Product development establishments. NE-A0107 is heavily used for testing & validating the actuators, valves, accumulators, pumps, hydraulic motors and the hydraulic power packs. Integral drive and integral dynamometer are provided for testing pumps and motors. The NE-A0107 Series Test Stands are available configured for use with MIL-H-5606, MIL-H-83282, MIL-H-87257 and MIL-H-46170 Hydraulic fluids. Customized OPTIONS are also available. Key Features:  Cost-effective (International quality, INDIAN PRICE), accurate, automated, software driven, highly capable test system.  Fully Computerized Test Stand. Manual & Semi-Automatic options also available.  National Instruments PXI Based DAQ with Lab View based software  Operating Pressure: up to 3,000 PSI. Flow: up to 20 GPM. Static Pressure: up to 10,000 PSI.  Pumps drive: 5000 RPM, 200 HP. Dynamometer: 5000 RPM, 200 HP. Electrical DC supplies for power packs: 0-32 VDC, 1000 AMP.  Temperature control of hydraulic test circuits. Chilled Water & Air cooled options available.

universal-hydraulic-test-bench-aircrafts .pptx

Neometrix_Engineering_Pvt_Ltd

Machine's Salient Features :This is Multi Clamp Perfect Binding Machine, where 6 book clamps travelling in an oval shaped path and done a binding work in a perfect way. 1. In this spine is in line with the crucial binding systems.2. Milling Cutter Comes With Strip Type Cutter and Separate Waste Exhaust System. 3. Gluing System Which has 2 forward rollers and 1 reverse roller (In-built Heating) gives high Quality binding.4. Calibrated head and tail cut offs to avoid adhesive squeeze out.5. Online creasing attachment with Auto Cover feed makes more sense in production.6. Our machine has Optional feeder tray for manual feeding of gate folded covers.7. 'No book-No cover' system ensures the continuous flow of clamps.8. Height and Pressure adjustable ram for book blocks. 9. Moving type Cam Nipping system ensures perfect nipping cover registration.10. Chute delivery system with built in safety systems.

Six Clamp Perfect Binding Machine

Neometrix_Engineering_Pvt_Ltd

Hydraulic Test Pac with chart recorder is portable, light weight hydro testing equipment designed for shop floor and onsite pressure testing and generates the chart to monitor the process. The unit is self-contained and powered by compressed air. The System requires a supply of compressed shop air to power the liquid pump. A simple adjustment of the air drive pressure regulator setting determines the final output pressure and the pump will automatically stall when the desired hydraulic pressure is attained. When the pump stalls it consumes no further energy and can remain in stall condition indefinitely.

hydraulic-test-pac-with-chart-recorder.pptx

Neometrix_Engineering_Pvt_Ltd

The Compressor test rig is used to test various lubricating oils regarding their usability in the compressor GA VSD15 from Atlas Copco. Compressor test rig to evaluate the compressor oil performance under a variety of operating Condition predict expected oil service life .Compressor able to run ISO VG oil 32 to 100.The Compressor should have high reliability for uninterrupted operation for at least 4000 hours. It should have sufficient Instruments and sensors for monitoring and fault diagnosis and appropriate controls with interlock for safe operations. This compressor test rig has 4 parts for smooth running of this test rig. (I) Compressor part: In this part 15 kw motor with screw type compressor is mounted with air dish end for air compressor. All required sensor and item are mounted in this section. Oil & air cooling and heating system are provided in this part. (II) Power control unit: For the smooth running of system we are providing a VFD control unit with mains power supply. (III) Data acquisition system (DAQ): In this section we are providing data control through PLC. (IV) Air storage: we are using this air storage for storage the compressed air for testing of outlet pressure temp and flow.

oil-flooded-screw-compressor-test-rig.pptx

Neometrix_Engineering_Pvt_Ltd

More from Neometrix_Engineering_Pvt_Ltd (20)

Integrated Test Rig For HTFE-25 - Neometrix

Neometrix Optical Balloon Theodolite.pptx

Dynamometer Engine Test Rig for engines parameters RPM

Portable Digital Barometer for Indian Air force

TEST RIG FOR HYDRAULIC FLUID (A3987) - NEOMETRIX DEFENCE

Hydraulic Loading System - Neometrix Defence

Hydraulic Hose Leak Testing (Test Rig is Pneumatic Hydraulic).pptx

Test Rig for 130LPM Pump of LCA- Neometrix

Lock Loading Test Rig (ERU119 & ERU120) .pptx

starter-generator-test-bench-Catalog.pptx

Printed Circuit Boards (PCBs) PCB-thermal-test-bench.pptx

Optical-test-bench-for-pcb-and-optic-testing.pptx

Printed circuit board (PCB) FUNCATIONAL TEST BENCH.pptx

Mobile Test Facility (MTF) - Neometrix Defenece

modern-universal-automatic-test-equipment.pptx

HYDRAULIC REFILLING TROLLEY - NEOMETRIX DEFENCE

universal-hydraulic-test-bench-aircrafts .pptx

Six Clamp Perfect Binding Machine

hydraulic-test-pac-with-chart-recorder.pptx

oil-flooded-screw-compressor-test-rig.pptx

Recently uploaded

International Journal of Intelligent Systems and Applications in Engineering (IJISAE) is an international and interdisciplinary journal for both invited and contributed peer reviewed articles that intelligent systems and applications in engineering at all levels. The journal publishes a broad range of papers covering theory and practice in order to facilitate future efforts of individuals and groups involved in the field. IJISAE, a peer-reviewed double-blind refereed journal, publishes original papers featuring innovative and practical technologies related to the design and development of intelligent systems in engineering. Its coverage also includes papers on intelligent systems applications in areas such as nanotechnology, renewable energy, medicine engineering, Aeronautics and Astronautics, mechatronics, industrial manufacturing, bioengineering, agriculture, services, intelligence based automation and appliances, medical robots and robotic rehabilitations, space exploration and etc.

Call for Papers - International Journal of Intelligent Systems and Applicatio...

Christo Ananth

VIP Model Call Girls Kothrud ( Pune ) Call ON 8005736733 Starting From 5K to 25K High Profile Escorts In Pune Booking Now open +91- 8005736733 Why you Choose Us- +91- 8005736733 HOT⇄ 8005736733 Mr ashu ji Call Mr ashu Ji +91- 8005736733 (V030524]N) 𝐇𝐨𝐭𝐞𝐥 𝐑𝐨𝐨𝐦𝐬 𝐈𝐧𝐜𝐥𝐮𝐝𝐢𝐧𝐠 𝐑𝐚𝐭𝐞 𝐒𝐡𝐨𝐭𝐬/𝐇𝐨𝐮𝐫𝐲🆓 .█▬█⓿▀█▀ 𝐈𝐍𝐃𝐄𝐏𝐄𝐍𝐃𝐄𝐍𝐓 𝐆𝐈𝐑𝐋 𝐕𝐈𝐏 𝐄𝐒𝐂𝐎𝐑𝐓 Hello Guys ! High Profiles young Beauties and Good Looking standard Profiles Available , Enquire Now if you are interested in Hifi Service and want to get connect with someone who can understand your needs. Service offers you the most beautiful High Profile sexy independent female Escorts in genuine ✔✔✔ To enjoy with hot and sexy girls ✔✔✔ ★providing:- • Models • vip Models • Russian Models • Foreigner Models • TV Actress and Celebrities • Receptionist • Air Hostess • Call Center Working Girls/Women • Hi-Tech Co. Girls/Women • Housewife

VIP Model Call Girls Kothrud ( Pune ) Call ON 8005736733 Starting From 5K to ...

SUHANI PANDEY

Unleashing the Power of the SORA AI lastest leap

RishantSharmaFr

Double Revolving field theory-how the rotor develops torque

BhangaleSonal

Call Girl Meerut Indira Call Now: 8617697112 Meerut Escorts Booking Contact Details WhatsApp Chat: +91-8617697112 Meerut Escort Service includes providing maximum physical satisfaction to their clients as well as engaging conversation that keeps your time enjoyable and entertaining. Plus they look fabulously elegant; making an impressionable. Independent Escorts Meerut understands the value of confidentiality and discretion - they will go the extra mile to meet your needs. Simply contact them via text messaging or through their online profiles; they'd be more than delighted to accommodate any request or arrange a romantic date or fun-filled night together. We provide –

(INDIRA) Call Girl Meerut Call Now 8617697112 Meerut Escorts 24x7

Call Girls in Nagpur High Profile Call Girls

Call Girls Pimpri Chinchwad Call Me 7737669865 Budget Friendly No Advance Booking Booking Now open +91- 7737669865 Why you Choose Us- +91- 7737669865 HOT⇄ 7737669865 Mr ashu ji Call Mr ashu Ji +91- 7737669865 (V020524]N) 𝐇𝐨𝐭𝐞𝐥 𝐑𝐨𝐨𝐦𝐬 𝐈𝐧𝐜𝐥𝐮𝐝𝐢𝐧𝐠 𝐑𝐚𝐭𝐞 𝐒𝐡𝐨𝐭𝐬/𝐇𝐨𝐮𝐫𝐲🆓 .█▬█⓿▀█▀ 𝐈𝐍𝐃𝐄𝐏𝐄𝐍𝐃𝐄𝐍𝐓 𝐆𝐈𝐑𝐋 𝐕𝐈𝐏 𝐄𝐒𝐂𝐎𝐑𝐓 Hello Guys ! High Profiles young Beauties and Good Looking standard Profiles Available , Enquire Now if you are interested in Hifi Service and want to get connect with someone who can understand your needs. Service offers you the most beautiful High Profile sexy independent female Escorts in genuine ✔✔✔ To enjoy with hot and sexy girls ✔✔✔ ★providing:- • Models • vip Models • Russian Models

Call Girls Pimpri Chinchwad Call Me 7737669865 Budget Friendly No Advance Boo...

roncy bisnoi

ONLINE FOOD ORDER SYSTEM is a website designed primarily for use in the food delivery industry. This system will allow hotels and restaurants to increase scope of business by reducing the labor cost involved. The system also allows to quickly and easily manage an online menu which customers can browse and use to place orders with just few clicks. Restaurant employees then use these orders through an easy to navigate graphical interface for efficient processing.

ONLINE FOOD ORDER SYSTEM PROJECT REPORT.pdf

Kamal Acharya

Call Girls In Bangalore ☎ 7737669865 🥵 Book Your One night Stand Booking Contact Details :- WhatsApp Chat :- +91-7737669865 Call Girls In Model Towh +91-7737669865 !! Best Woman Seeking Man Call Girls Service, Escorts Service in Home Hotel in NCR 24 Hours Available Service Call Girls, Contact Us +91-7737669865 (Any Time. Any Where) Call Girls in , Noida, Gurgaon, Ghaziabad,Sexy Indian Female Escorts Service NCRWelcome To Escorts Service – An All Over New Very Sexy Hot Call Girls Agency Service Escorts In South NCR’s No. 1 High Profile Independent Female Escorts Service. We Provide Good Quality Educated Profile At #K09 Very Regnebal Price 100% Safe And Original.We Are Provide Escorts Service All OYO Hotels ,3*,4*,5* Star Hotel And Home Flat, Apartment. Guest-House. Services In -Call And Out – Call Both Are Services Available. 24Hrs. Any Time Any Where. In All Over Noida Gurgaon Ghaziabad Faridabad.More Information And Contact Profile Real Pic Visit Our Website City Wise Escorts Service Agency.Good Looking Cheap And Best Models Girls U Can Get Best Click On Link……Night Call Girls Now In Hotel Le Meridien Gurgaon Near Female Escort One Shot — 5000/in call (time 1 hour), 6000/out call Two shot with one girl — 8000/in call (time 2 hour), 10000/out call Body to body massage with sex- 8000/in call (time 1 hour) Full night Service for one person– 12000/in call, 13000/out call (shot limit 3-4 shots) Full night Service for more than 1 person — please contact Us —7737669865 We are available 24*7 all days of the year. Call us — 7737669865 Thank you for Visiting.

Call Girls In Bangalore ☎ 7737669865 🥵 Book Your One night Stand

amitlee9823

LIST OF EXPERIMENTS: 1. Implement simple vector addition in Tensor Flow. 2. Implement a regression model in Keras. 3. Implement a perception in TensorFlow/Keras Environment. 4. Implement a Feed Forward Network in TensorFlow/Keras. 5. Implement an image classifier using CNN in TensorFlow/Keras. 6. Improve the deep Learning model by fine tuning hyper parameters. 7. Implement a Transfer Learning concept in image classification. 8. Using a pre trained model on Keras for transfer learning. 9. Perform Sentimental Analysis using RNN. 10. Implement an LSTM based Auto encoding inTensorflow/Keras. 11. Image generation using GAN. ADDITIONAL EXPERIMENTS 12. Train a deep Learning model to classify a given image using pre trained model. 13. Recommendation system from sales data using Deep Learning. 14. Implement Object detection using CNN. 15. Implement any simple Reinforcement Algorithm for an NLP problem.

CCS335 _ Neural Networks and Deep Learning Laboratory_Lab Complete Record

Asst.prof M.Gokilavani

PVC VS. FIBERGLASS (FRP) GRAVITY SEWER - UNI BELL

ManishPatel169454

VIP Call Girls Palanpur 7001035870 Whatsapp Number, 24/07 Booking Escorts Service Available Whatsapp SABANA ☎️ : [+91-7001035870] Escorts Service are always ready to make their clients happy. Their exotic looks and sexy personalities are sure to turn heads. You can enjoy with them, including massages and erotic encounters. Our area Escorts are young and sexy, so you can expect to have an exotic time with them. They are trained to satiate your naughty nerves and they can handle anything that you want. They are also intelligent, so they know how to make you feel comfortable and relaxed Independent Escorts Service They know all the sex positions and can satisfy you in any way that you desire. They can even give you erotic massages to help you relax before your session. This is essential, because a man who is stressed won’t be receptive to the pleasures of sex. They also know how to play with your sexy organs, so you’ll have plenty of foreplay and cuddling. P252024SS SERVICE ✅ ❣️ ⭐➡️HOT & SEXY MODELS // COLLEGE GIRLS HOUSE WIFE RUSSIAN , AIR HOSTES ,VIP MODELS . AVAILABLE FOR COMPLETE ENJOYMENT WITH HIGH PROFILE INDIAN MODEL AVAILABLE HOTEL & HOME ★ SAFE AND SECURE HIGH CLASS SERVICE AFFORDABLE RATE ★ SATISFACTION,UNLIMITED ENJOYMENT. ★ All Meetings are confidential and no information is provided to any one at any cost. ★ EXCLUSIVE PROFILes Are Safe and Consensual with Most Limits Respected ★ Service Available In: - HOME & HOTEL Star Hotel Service .In Call & Out call SeRvIcEs : ★ A-Level (star escort) ★ Strip-tease ★ BBBJ (Bareback Blowjob)Receive advanced sexual techniques in different mode make their life more pleasurable. ★ Spending time in hotel rooms ★ BJ (Blowjob Without a Condom) ★ Completion (Oral to completion) ★ Covered (Covered blowjob Without condom ★ANAL SERVICES.

VIP Call Girls Palanpur 7001035870 Whatsapp Number, 24/07 Booking

dharasingh5698

Top Rated Pune Call Girls Budhwar Peth ⟟ 6297143586 ⟟ Call Me For Genuine Sex Service At Affordable Rate Booking Contact Details WhatsApp Chat: +91-6297143586 pune Escort Service includes providing maximum physical satisfaction to their clients as well as engaging conversation that keeps your time enjoyable and entertaining. Plus they look fabulously elegant; making an impressionable. Independent Escorts pune understands the value of confidentiality and discretion - they will go the extra mile to meet your needs. Simply contact them via text messaging or through their online profiles; they'd be more than delighted to accommodate any request or arrange a romantic date or fun-filled night together. We provide - 01-may-2024(v.n)

Top Rated Pune Call Girls Budhwar Peth ⟟ 6297143586 ⟟ Call Me For Genuine Se...

Call Girls in Nagpur High Profile

Model Call Girl Services in Delhi reach out to us at 🔝 9953056974 🔝✔️✔️ Our agency presents a selection of young, charming call girls available for bookings at Oyo Hotels. Experience high-class escort services at pocket-friendly rates, with our female escorts exuding both beauty and a delightful personality, ready to meet your desires. Whether it's Housewives, College girls, Russian girls, Muslim girls, or any other preference, we offer a diverse range of options to cater to your tastes. We provide both in-call and out-call services for your convenience. Our in-call location in Delhi ensures cleanliness, hygiene, and 100% safety, while our out-call services offer doorstep delivery for added ease. We value your time and money, hence we kindly request pic collectors, time-passers, and bargain hunters to refrain from contacting us. Our services feature various packages at competitive rates: One shot: ₹2000/in-call, ₹5000/out-call Two shots with one girl: ₹3500/in-call, ₹6000/out-call Body to body massage with sex: ₹3000/in-call Full night for one person: ₹7000/in-call, ₹10000/out-call Full night for more than 1 person: Contact us at 🔝 9953056974 🔝. for details Operating 24/7, we serve various locations in Delhi, including Green Park, Lajpat Nagar, Saket, and Hauz Khas near metro stations. For premium call girl services in Delhi 🔝 9953056974 🔝. Thank you for considering us!

Call Now ≽ 9953056974 ≼🔝 Call Girls In New Ashok Nagar ≼🔝 Delhi door step de...

9953056974 Low Rate Call Girls In Saket, Delhi NCR

Data security is rapidly gaining importance as the volume of data companies collect, analyze and monetize grows exponentially. New data processing tools and platforms are emerging at an increasing rate, as are the ways in which an organization consumes data. In this presentation Mukund Sarma and Feni Chawla talk about the unique technical and cultural challenges of running a data security program and share some practical solutions that have worked well at our company. These slides were presented at the BSides Seattle 2024 conference.

BSides Seattle 2024 - Stopping Ethan Hunt From Taking Your Data.pptx

fenichawla

AKTU Computer Networks notes --- Unit 3.pdf

ankushspencer015

Welcome to the April edition of WIPAC Monthly, the magazine brought to you by Water Industry Process Automation & Control. In this month's edition, along with the latest news from the industry we have articles on: The use of artificial intelligence and self-service platforms to improve water sustainability A feature article on measuring wastewater spills An article on the National Underground Asset Register Have a good month, Oliver

Water Industry Process Automation & Control Monthly - April 2024

Water Industry Process Automation & Control

GAS POWER CYCLES Cycles: Otto, Diesel, Dual, Brayton - Calculation of mean effective pressure - Air standard efficiency - Comparison of cycles INTERNAL COMBUSTION ENGINES Classification - Components and their function - valve timing diagram and port timing diagram - actual and theoretical p-v diagram of two stroke and four stroke engines – carburettor - diesel pump and injector system - battery and magneto ignition system - principles of combustion and detonation in CI engines - lubrication and cooling systems - performance parameters and calculations.

Thermal Engineering Unit - I & II . ppt

DineshKumar4165

Unit 1 - Soil Classification and Compaction.pdf

RagavanV2

Increased aeration of the soil; Stabilized soil structure; Higher and more diversified crop production; Better workability of the land; Earlier planting dates; Reduction of peak discharges by an increased temporary storage of water in the soil decomposition of organic matter; soil subsidence; reduced irrigation efficiency; increased risk of drought. excessive leaching of valuable nutrients from the soil; downstream environmental damage by salty or otherwise polluted drainage water; the presence of ditches, canals, and structures impending accessibility and interfering with other infrastructural elements of the land.

chapter 5.pptx: drainage and irrigation engineering

mulugeta48

Generative AI or GenAI technology based PPT

bhaskargani46

Recently uploaded (20)

Call for Papers - International Journal of Intelligent Systems and Applicatio...

VIP Model Call Girls Kothrud ( Pune ) Call ON 8005736733 Starting From 5K to ...

Unleashing the Power of the SORA AI lastest leap

Double Revolving field theory-how the rotor develops torque

(INDIRA) Call Girl Meerut Call Now 8617697112 Meerut Escorts 24x7

Call Girls Pimpri Chinchwad Call Me 7737669865 Budget Friendly No Advance Boo...

ONLINE FOOD ORDER SYSTEM PROJECT REPORT.pdf

Call Girls In Bangalore ☎ 7737669865 🥵 Book Your One night Stand

CCS335 _ Neural Networks and Deep Learning Laboratory_Lab Complete Record

PVC VS. FIBERGLASS (FRP) GRAVITY SEWER - UNI BELL

VIP Call Girls Palanpur 7001035870 Whatsapp Number, 24/07 Booking

Top Rated Pune Call Girls Budhwar Peth ⟟ 6297143586 ⟟ Call Me For Genuine Se...

Call Now ≽ 9953056974 ≼🔝 Call Girls In New Ashok Nagar ≼🔝 Delhi door step de...

BSides Seattle 2024 - Stopping Ethan Hunt From Taking Your Data.pptx

AKTU Computer Networks notes --- Unit 3.pdf

Water Industry Process Automation & Control Monthly - April 2024

Thermal Engineering Unit - I & II . ppt

Unit 1 - Soil Classification and Compaction.pdf

chapter 5.pptx: drainage and irrigation engineering

Generative AI or GenAI technology based PPT

drive-and-control-automation-system.pptx

3. A drive and control automation system is designed for Helicopter Main Gear Box (MGB) load test rig. The test rig consists of test rig structure in which the MGB of Advanced Light Helicopter (ALH), drive motor, adapter gear boxes are installed. Supplying all hardware & software required for the drive and control automation system for the test rig. The test rig is a mechanical closed loop system in which the rated speed of MGB is achieved by motor through lower adaptor gearbox. In order to achieve various loads such as thrust loads, torque load and hydraulic pump loads the hydraulic power packs with actuators will be employed. The hydraulic power packs consist of motor pumps, various process switches, sensors valve, etc. which facilitate remote operation of DAS (Data Acquisition System) of the test rig. An AC alternator which is mounted on MGB is to be loaded through resistive load bank with contactor panel.

5.  Temperature module/card  Digital Input(24Vdc) module/card  Digital output with potential free SPDT relay board  Vibration input (IEPE) module/card-Input Type  Analog input – Voltage module/card  Analog input – Current module/card  250KW AC motor with encoder  Emergency Stop Push Button

7. Items Name Specifications 250KW AC motor with encoder TYPE- 3 Phase TEFC squirrel cage Ac induction moter, suitable for inverter duty confirming to IS/IEC standards Blower Motor Blower motor 1 phase/3 phase for motor cooling AC Variable frequency drive(VFD) Application- Variable frequency drive Required for above 250 kw moter make siemens/ABB/PARKER, MCCB 4 Pole, 600A MCCB for main incoming supply, Breaking Capacity 100 kA with Rotory handle AC Line Reactors Phase AC line reactors for 250kW VFD MPCB Motor circuit breaker, 3P, 415VAC 1-1.6 A, thermal magnetic, spring terminals VFD Remote Display Remote display for VFD with connecting cable

8. A drive and control automation system is designed for Helicopter Main Gear Box (MGB) load test rig. The test rig consists of test rig structure in which the MGB of Advanced Light Helicopter (ALH), drive motor, adapter gear boxes are installed. Supplying all hardware & software required for the drive and control automation system for the test rig.

9. Thank You

drive-and-control-automation-system.pptx

Recommended

Recommended

More Related Content

Similar to drive-and-control-automation-system.pptx

Similar to drive-and-control-automation-system.pptx (20)

More from Neometrix_Engineering_Pvt_Ltd

More from Neometrix_Engineering_Pvt_Ltd (20)

Recently uploaded

Recently uploaded (20)

drive-and-control-automation-system.pptx