1. 1 | 3
Mohamed Ahmed Abdel Rahman
Benha, Qaliubiya, Egypt
E-mail: eng_mohamed86@live.com
Cell Phone: +2.01114109996 / +2.01002303675
Summary
Senior Mechanical Engineer with professional experience in Mechanical Engineering with Oil & Gas industry
background. Wide range of expertise & skills in gas turbines, pumps, compressors, valves and static equipment
maintenance and troubleshooting. BSc. In Mechanical Engineering. Preparing maintenance plans, budgeting,
technical evaluation, and reporting have been important parts of my duties.
Employment
 Rotating Equipment Mechanical Engineer, Cairo Oil Refining Company (CORC), From September 2012
To May 2014 & From July 2016 Till Now.
Achievements:
- Offered major contributions to 5 days replacing Dry Gas Seal and Bearings of the Main Centrifugal
Compressor – Recycle Gas – “21-K-01A” (Termomeccanica, 4 Stages) in the Reform Catalytic Unit.
Submitting multiple schematics for peer review and validation. The concepts were accepted and integrated
into the final rollout.
Main responsibilities:
- Follow up safety rules and work permit system for the different jobs.
- Ensuring spare parts availability and inventory optimization based on company policy.
- Supervision of the activities of mechanical crew during repair, P.M. and overhaul for all categories of rotating
machinery.
- Preparation of specifications for the purchase of new equipment in accordance with standard specifications
based on the American Petroleum Institute APIs, and technical study for the tender offers and their technically
acceptance.
- Liaise with vendor to improve machinery reliability.
- Issuing spare parts requisitions, cost estimation, justifications, and selection between technical offers.
- Preparation of long and short term agreements scope of work, and following up their activities.
- Updating maintenance work instructions (MWI) of mechanical activities.
 Mechanical Engineer, Suez Oil Company (SUCO), Ras Budran field, From in June 2014 To June 2016.
Main responsibilities:
- Follow up safety rules and work permit system for the different jobs.
- Prepare risk assessments for routine and non-routine maintenance activities according to ISO 18001 Form.
- Ensuring spare parts availability and inventory optimization based on company policy.
- Supervision of the activities of mechanical crew during repair, P.M. and overhaul for all categories of rotating
machinery and static equipment.
- Planning, scheduling and supervision of plant shutdown activities.
- Preparation of rout cause analysis (RCA) reports for equipment failures and follow up corrective actions.
- Liaise with vendor to improve machinery reliability.
- Issuing spare parts requisitions, cost estimation, justifications, and selection between technical offers.
- Preparation of long and short term agreements scope of work, and following up their activities.
- Updating maintenance work instructions (MWI) of mechanical activities.
 Rotating Equipment Mechanical Engineer, Suez Oil Processing Company (SOPCO), from September 2009
To September 2012.
Achievements:
- Offered major contributions to 20 days overhaul plan for the Main Centrifugal Compressor – Recycle Gas –
“21-K-01” (NuovoPignone, 5 Stages) in the Reform Catalytic Unit and replace its Dry Gas Seal. Submitting
multiple schematics for peer review and validation. The concepts were accepted and integrated into the final
rollout.
- Offered major contributions to 15 days overhaul plan for the High-Pressure Centrifugal Pump “12-P-14A”
(Flowserve, 8 Stages) in the Hydraulic Decoking unit. Submitting multiple schematics for peer review and
validation. The concepts were accepted and integrated into the final rollout.

2. 2 | 3
Main responsibilities:
- Follow up safety rules and work permit system for the different jobs.
- Ensuring spare parts availability and inventory optimization based on company policy.
- Supervision of the activities of mechanical crew during repair, P.M. and overhaul for all categories of rotating
machinery.
- Preparation of specifications for the purchase of new equipment in accordance with standard specifications
based on the American Petroleum Institute APIs, and technical study for the tender offers and their technically
acceptance.
- Liaise with vendor to improve machinery reliability.
- Issuing spare parts requisitions, cost estimation, justifications, and selection between technical offers.
- Preparation of long and short term agreements scope of work, and following up their activities.
- Updating maintenance work instructions (MWI) of mechanical activities.
Technical Experience
Rotating equipment:
 GE gas turbine frame 5, single shaft, 24000 KW base load:
- The unit maintenance includes routine maintenance and troubleshooting of auxiliary, Prepare gas turbine
overhaul and hot gas path scope of work .Preparing required spare parts and tools, co-ordination and
supervision of vendor and manpower.
 Centrifugal pumps (Horizontal / Vertical) of different manufacturers (Up to 1.65MW).
 Vacuum pumps (liquid ring type).
 Positive displacement pumps, for hydraulic systems or chemical injection package with different types and
capacities (piston, plunger, gear, and screw pumps).
 Centrifugal compressors: Horizontal type, with electric motor and steam turbine drives up to 2.5 MW.
 Reciprocating compressors: horizontal type, V- type with electric motor drives up to 1.85 MW.
 Waste water treatment plant with Floating skimmers and their fully hydraulic system.
 Water desalination units (RO type).
Static equipment:
 Implementation of positive isolation procedures, preparation of tools/spare parts for the internal
inspection of the following:
- Heat Exchangers, fired heaters.
- Storage tanks, vessels, separators.
- Pipelines.
- Dehydration units.
 Valves maintenance.
Alignment:
 Carried out alignment jobs for the following:
- Electrical motors on single/double journal bearing(s) to the driven equipment.
- Electrical motors on anti-friction bearings to the driven equipment.
General:
 Familiar with Engineering Codes & Standards.
 Familiar with P&I diagrams, and engineering drawings.
Education
 B.Sc. in Benha University Mechanical Power Engineering, 2003-2008.
Interpersonal Skills
 Team leadership and team work.
 Good analytical & problem solving skills.
 Good communication skills.
 Task/Time management.
 Can cope with work pressure.

3. 3 | 3
Computer Skills
 Very good user of MS Office Package.
 Good user of SAP system.
 Good user of Global Maintenance System (GMS).
Language Skills
Arabic : Mother Tongue
English : Very good
Personal information
Date of Birth : 28th
September 1986
Nationality : Egyptian
Military service : Exempted
Marital Status : Married
References are available upon request
Mohamed Ahmed Abdel Rahman eng_mohamed86@live.com 002.01114109996
eng_mohamed013@yahoo.com 002.01002303675