1. R E S U M E
POSITION DESIRED : Senior Rotating Equipment Technician
NAME : Hilario C. Dicag
TEL.NUMBER : +966567069477 / +639081680909
ADDRESS : Purok # 6, Govic st. San Nicolas, Castillejos
Zambales, Philippines, 2208
DATE OF BIRTH : November 03, 1964
E-MAIL ADDRESS : hilario.dicag@yahoo.com
QUALIFICATION AND EXPERIENCE
Have more than 22 years overseas and 4 years local experience as Mechanical Technician/
Critical Rotating Equipment Technician / Mechanical Fitter in Gas Plant and
Petrochemicals/ Oil and Gas Refinery / Power Plants with combined cycle Heat Recovery
system. Has a very good, strong hands-on construction and installation experience of all
aspect of Rotating / Static Equipment / Leveling alignment / Piping-fabrication / Erection /
Installation & Testing / Start – up & Commissioning / Client turn-over, Operation and
Maintenance.
2. EMPLOYMENT HISTORY:
1. Date : November 21,2011-up to April 26,2016
Position : Senior Rotating Equipment Technician
Company : Saudi Aramco Total Refining and Petrochemical Company
Jubail 2 Industrial Area, Jubail, KSA
Job Description :
• Directly responsible to the Mechanical Rotating Equipment Supervisor for the safe
execution of the following activities.
• Start-up & commissioning and maintenance of following rotating
Equipment; Compressors (KOBELCO KR70-2 & KR60-2; HOWDEN
P000148REP3, DRESSER-RAND 4BDC-OF-18H3-3; ELLIOT-IBARRA
29MB5/10, 25MB10, 60MB9/10 & SIAD “W” type), Blowers (DMW,),
Screw Compressors (D55-07W, up to D155-10W Comp. air), Screw pumps,
Pumps (FLOWSERVE, SUNDYNE, GOULD, CLOUD UNION,
NUOVO PIGNONE 6X15-DDHF/8’ST) and STEAM TURBINES.
• Carries out routine maintenance of rotating equipment, carries out visual checks of
seals for leaks, disassembles equipment, replaces part as directed, cleans
equipment, replaces packing and gaskets. Repairs as appropriate, checks bearings
and reassembles. Checks and record web deflection of the crank shafts, Checks the
run-outs of rotating equipment shafts, Ensures correct alignment and tolerances,
using precision measurement instruments, such as laser alignment equipment,
micrometers, gauges and calipers.
• Responsible for the support of company safety, environment and quality policies and
programs, and carrying out specific duties and responsibilities related to management
system documentation, policies, procedures, local documentation safety manual and
other related documents.
• Scheduled / unscheduled maintenance and overhauling of all Critical Rotating
Equipment and related auxiliaries.
• Provide technical assistance to subcontractor on repair of all rotating equipment
within the refinery.
• Assist and coordinate the day to day activities of critical rotating equipment for
Workshop activities.
• Check, evaluate, troubleshooting and problem solving of various Mechanical
challenge.
• Maximize the reliability and availability of plant equipment.
• Perform technical investigation and root cause analysis.
• Maintain / Update the job completion records.
3. • Assist in inspection of equipment for its healthiness.
• Adhere to the work management process of SATORP processes / procedures.
• Request for external material and services if needed.
• Maintain housekeeping in work place.
2. Date : July 22, 2007-up to July 31,2011
Position : Senior Mechanical Technician
Company : Eurest Support Services (Compass)
PGTL Shell project
Ras Laffan Industrial City, Qatar
Job Description :
• Maintenance of various types of Mechanical Equipment. Involve in preventive,
predictive and corrective maintenance of all mechanical equipment.
• Carries out planned maintenance on all centrifugal pumps which includes carrying
out inspection, repair, maintenance, overhaul, rebuild, and replacement if
necessary of worn out internal parts in horizontal and vertical pumps.
• Aligns pump and motor coupling together to get smooth flow to prevent noise and
vibration. Ensures alignment is completed to the correct tolerances.
• Performs daily maintenance checks on operating equipment and reports any
abnormalities or unusual noise.
• Overhauling of pumps, compressors with strict observance of tolerable Bearings
and wear rings clearances and shaft run-outs and mechanical seals proper
installation.
• Reconditioning of gate valve, ball valve, globe valve, relief valves and other types of
valves used within the plant.
• Check final pump shaft alignment prior to start-up and commissioning and take
vibration and temperature during the duration of the test.
• Establish the centerline and check the elevation of machinery before installation.
Checking of packer plate and anchor bolts prior to grouting.
• Coordinate with supervisor or process operator prior to start up and commissioning.
• Participates in condition monitoring checks on machinery, and notifies immediate
supervisor of any malfunction or defects.
• Remains on call duty during emergencies, including callout at night.
• Responds to emergency conditions, using good judgment and making appropriate
repairs.
• Perform other duties as assigned.
3. Date : May 31, 1998 – up to June 15, 2007
4. Position : Gas Turbine Maintenance
Company : King Abdul Aziz Military Cantonment
Ministry of Defense and Aviation
P.O. box 475 Tabuk, KSA
Job Description :
• Responsible to control or maintain Power Plant in normal operating condition. Involve
in preventive, predictive and corrective maintenance of all mechanical equipments in the
power plant.
• Operate, repair and perform organizational and intermediate maintenance on
mechanical components of gas turbine engines, main propulsion machinery including
gears, shafts and controllable pitch propellers, and assigned auxiliary equipment.
• Carry out pre-start check of the gas turbines when re-starting the units. Such as the
igniters, flame detectors, combustion chambers, atomizing air pressure, turning gears,
air coolers and the starting package.
• Testing lubricating oil and distillate fuels for contamination and neutralization.
• Record and compile operational data by completing and maintaining forms, logs, or
reports.
• Make adjustments or minor repairs, such as tightening leaking gland and pipe joints of
the pumps using in water tankers.
• Regulate equipment operations and conditions, such as water levels, based on instrument
data or from computers.
• Inspect records or log book entries or communicate with plant personnel to assess
equipment operating status.
• Start or stop generators, auxiliary pumping equipment, turbines, or other power plant
equipment as necessary.
• Control power generating equipment, including boilers, turbines, generators, or
reactors, using control boards or semi-automatic equipment.
• Clean, lubricate, or maintain equipment, such as generators, turbines, pumps, or
compressors, to prevent failure or deterioration.
• Communicate with systems operators to regulate and coordinate line voltages and
transmission loads and frequencies.
• Adjust controls to generate specified electrical power or to regulate the flow of power
between generating stations and substations.
• Collect oil, water, or electrolyte samples for laboratory analysis.
• Control generator output to match the phase, frequency, or voltage of electricity
supplied to panels.
• Place standby emergency electrical generators on line in emergencies and monitor the
temperature, output, and lubrication of the system.
• Replenish electrolytes in batteries and oil in voltage transformers, and reset tripped
electric relays.
5. 4. Date : September, 1994 –up to October, 1996
Position : Mechanical Technician
Company : Saudi Operation and Maintenance Company
King Khalid Air Base
P.O.Box, 10015 Khamis Mushayt, KSA 11541
Job Description :
• Maintains diagnoses and repairs a variety of equipment including diesel engines,
transmissions, air compressors, generators, separators, blowers, Air coolers, high
pressure pumps, centrifugal pumps, gear boxes and other mechanical equipment.
• Responsible for performing highly diversified duties to install, troubleshoot, and
maintain production and facility equipment according to safety, predictive and
productive maintenance systems and processes to support the achievement of the site
business goals and objectives.
• Responsible for ensuring the duties of their position are performed in safe, efficient and
effective manner.
• Performs preventive/predictive maintenance of all mechanical equipment in the plant.
• Performs basic troubleshooting on mechanical pneumatic and hydraulic system.
• Installs and replaces new or reconditioned spare parts.
• Handle simple and complex heavy industrial equipment, such as overhead crane,
forklifts, boom trucks, Trucks and bobcats.
• Ensure mechanical operations, standards and controls are maintained at high quality.
• Ensure high level technical support to lower level technicians.
• Show expertise in working with team and independently.
• Comply with company safety guidelines and procedures.
• Repair and perform preventive maintenance as per established standards.
• Handle simple and complex heavy industrial equipment, such as overhead crane,
forklifts, boom trucks, Trucks and bobcats.
• Comply with company and costumer regulations and policies.
• Manage positive costumer and employee relation.
6. 5. Date : August,1990 –up to August,1993
Position : Power plant operator / Maintenance
Company : Nafa Maintenance and Services
P.O.Box. 1667 Al-Khobar KSA
Job Description :
• Responsible for providing daily technical oversight and support of internal and external
maintenance and operation activities of the entire power plant.
• Control and maintain auxiliary equipment such as pumps, fans, compressors,
condensers, feed water heaters, filters and chlorinators to supply water, fuel, lubricants,
air and auxiliary power.
• Adjust controls to generate specified electrical power, or to regulate the flow of power
between generating stations and substations.
• Control generator output to match the phase, frequency, and voltage of electricity
supplied to panels during synchronizing.
• Make adjustments or minor repairs, such as tightening leaking gland and pipe joints,
report any needs for major repairs.
• Monitor and inspect power plant equipment and indicators to detect evidence of
operating problems.
• Open and close valves and switches in sequence upon signals from other workers in
order to start or shut-down auxiliary units.
• Operate or control power generating equipment, including boilers, turbines, generators
and reactors using control boards or semi-automatic equipment.
• Place stand-by emergency electrical generators on line in emergencies and monitor the
temperature, output, and lubrication of the system.
• Regulate equipment operations and conditions such as water levels, based on data from
recording and indicating instruments or parameters.
• Replenish electrolytes in batteries and oil in voltage transformers, and reset tripped
electric relays.
• Start or stop generators, auxiliary pumping equipment, turbines, and other power plant
equipment, and connect or disconnect equipment from circuits.
• Take readings from charts, meters and gauges at established intervals, and take
corrective steps as necessary.
• Clean, lubricate and maintain equipment such as generators, turbines, pumps and
compressors in order to prevent equipment failure or deterioration.
• Communicate with system operators to regulate and coordinate transmission loads and
frequencies, and line voltages.
7. 6. Date : February. 1986 –up to July, 1990
Position : Diesel mechanic
Company : Zamodca Transport Service Cooperative
Olongapo City
Job Description :
• Responsible to maintain all transport vehicles in running good condition.
• Maintains diesel equipment operation by completing inspections and preventive
maintenance requirements, correcting vehicle deficiencies, making adjustments and
alignments, keeping record.
• Determines vehicle condition by conducting inspections and diagnostic tests, identifying
worn and damaged parts.
• Keeps equipment available for use by completing preventive maintenance schedules,
installing component and part upgrades, controlling corrosion.
• Corrects vehicle deficiencies by removing, repairing, adjusting, overhauling, assembling,
disassembling and replacing major assemblies, sub-assemblies, components, parts, or
systems, such as power and drive trains, fuel emission, brake, steering, hydraulics,
complete machine shop operations, making adjustments including bearing loads, gear
tooth contact, valve mechanisms, governors, oil systems and clutches.
• Verifies vehicle performance by conducting test drives, adjusting controls and systems.
• Maintains vehicle records by annotating services and repairs.
EDUCATIONAL BACKGROUND:
Year Name of School Degree / Course
1981 - 1983 - (Central Luzon Institute of Technology) - College
(Diesel Mechanic)
1977 – 1981 - (Saint Columban’s High School) - High School
(Secondary)
1971 - 1977 - (Central Elementary School) - Elementary
(Primary)
8. TRAINING ATTENDED:
• Centrifugal Compressor Driven Operation Training.
(ELLIOTT Ebara Group)
• Trouble shooting of mechanical and electrical parts of gas turbine unit.
• Industrial electricity with basic in electronics (Technical assistance
training program).
• Hazard identification, computer basic training certificate.
• Lifting and rigging awareness, computer basic training certificate.
• Confined space entry, computer basic training.
• Hand safety and manual handling, computer basic training certificate.
• SAP Basic training course
(SATORP Training department)
PERSONAL DATA:
AGE : 51
SEX : Male
DATE OF BIRTH : November 3, 1964
PLACE OF BIRTH : Zambales, Philippines
CITIZENSHIP : Filipino
CIVIL STATUS : Married
HEIGHT : 163.14 cm.
WEIGHT : 78 kg.
RELIGION : Christian
PASSPORT # : EC0453705
EXPIRY DATE : 28 Feb. 2019
I hereby certify that all the information given above is true to the best of my
knowledge.
