1. KALPESH B PARMAR
B.E.(MECHANICAL)
CAREER OBJECTIVE
To bring about a positive difference in my work place and to add good value to the
company by working sincerely, efficiently and diligently to the best of my abilities. To raise my
professional competency and strive to be the best in my field of work.
PROFILE SUMMARY
 A dynamic professional with over 5 years of experience in automobile industry.
 Currently associated with General Motors India PVT Ltd, Halol as Deputy Manager
Maintenance.
 Gained sound exposure to portable spot welding guns, IT guns, Welding fixtures, sealer
pumps, Demag hoists, conveyors, Stud welders, Fanuc Robots, Centrifugal pumps, chillers,
Hydraulics and pneumatics.
 Relevant exposure in maintenance of Plant ventilation, Blowers, Exhaust fans and fire
engine.
 Exposure in quality, safety & environment management requirements like ISO – 9000 and
ISO – 14001
 Well versed with TPM, Kaizen and 5s system
 Deft in establishing & maintaining a safe & secure workplace, reducing downtime and
enhancing operational efficiencies. Adept in ensuring the compilation of policies &
procedures with the highest standard of service. An effective communicator with excellent
leadership, interpersonal, people management & presentation skills.
JOB RESPONSIBILITIES:
 Daily planning of Maintenance activities for Team members and Team leader.
 Attend Daily Board meeting and Nerve center meeting to address maintenance issues.
 Ensure safe working practices by regular SOTs and effective implementation of SOPs.
 Maintaining WPO and 5’S standards at the working area.
 Planning and Implementation of PM, TPM and PDM programs.
 Drive PM/PDM program and its monthly review for the compliance through watch board.
 Effective implementation of Maximo software for Maintenance activities. Timely closure of
Maximo PM, PDM and Break down work orders.
 Maintain and update data base for shop equipments.
 Achieving uptime as per target.
1. MTTR and MTBF report generation for identified equipment of body shop and its analysis.
2. Filling up PPSR and Tracking of its action items till closure to improve uptime.
3. Brain storming for the repetitive break downs and action item implementation
 Maintenance of welding transformers, welding guns, Pneumatics fixtures, sealer pumps,
hydraulic lifter, COE conveyor, Mig welding machines, Demag hoists, Centrifugal pumps,
Hear Exchangers, Fanuc Robots, Hemming fixture, exhaust fans, AHU, Servo drive etc
 Achieving cost targets by
- Carrying out CAPEX and OPEX budget requirements of Bodyshop and compliance to
approved items
- repairing/localizing spares
-Active implementation of suggestion and kaizens for cost saving ideas.
- Weekly retrieval of cost data from SAP and its analysis.
pkalpesh5822@gmail.com Page 1 of 3
+91-9099480248

2.  Spares identification for new and inline equipments and its set up.
 Reduced compressed air leaks in Body shop to approximately zero by continuous focus
 Break down history maintenance and its analysis for recurring problems.
 Spare matrix management
-Preparing structured spare matrix for each line and equipment.
-Identifying critical spares
-Defining Min-Max quantity level in the stores to maintain inventory.
-Ensure all parts availability through monthly stock checking using SAP
-Deletion of obsolete items in the store to reduce inventory.
 Having the knowledge of Fanuc Robot programming and operation
 Fanuc Robot Maintenance
 Actively involved for the hemming Robot program quality improvement for part quality
requirement.
 Maintain good customer-supplier relationships at all times without compromising company
policies and procedures.
 Carry out TLs and TMs appraisals
MAJOR PROJECTS HANDLED
CN100 (Enjoy):
 Actively involved in Enjoy project for erection and commissioning of pneumatic fixtures,
welding transformer, Demag hoists, sealer pumps, main framer, electrical panels, weld bus,
air and water distribution networks.
 Closely monitored Tracking and closure of CN100 related punch points by following up
with project team and suppliers.
 Implemented project improvement activities for CN100 related to error proofing, ergo
issues, localization.
Hemming:
 Actively involved in new project for erection and commissioning of IT guns, pneumatic and
electro-pneumatic fixtures, Hemming cell, Fanuc Robot, centrifugal pumps, manipulators,
Demag hoist, Turn table, air and cooling water network for Hemming line.
 Closely monitored tracking and closure of Hemming related punch points by following up
with project team and suppliers.
 Involved in erection and commissioning of chiller, exhaust fan, centrifugal pumps.
Balancing of exhaust fans using static and dynamic balancing methods.
Press shop:
 Actively involved in Press shop maintenance activities since October 15.
 Acquired basic knowledge related to Press operation and maintenance.
 Taking active part in Press shop break down related issues and its repair activity.
 Looking after Press shop spare parts monitoring to ensure spares availability.

SELECTED ACOMPLISHMENTS
 Prepared MTS (Maintenance Task Sheet) and TIS (Task Instruction Sheet) for Non
Routine Maintenance Tasks of Body shop.
 Prepared SOP for Safety related task of Body shop Maintenance.
 Made Training module for Basic Pneumatic controls
 Won Gold Award in Quality circle forum -2013
pkalpesh5822@gmail.com Page 2 of 3
+91-9099480248

3.  Carry out PM/TPM and health check audit of shop equipments monthly to achieve uptime
of the equipment
 Prepared structured schedule for Gauge verification across the plant and its effective
implementation.
 Problem solving training to all Team members for Hemming fixture, pneumatic fixture,
Fanuc Robot, Electro-pneumatic fixtures.
 PPSR Training to all Team members.
 Compliance to statutory legal requirements. This includes load testing of Demag hoists,
tackles, Hydro and thickness testing of pressure vessels.
 Quality prove out for Robotic Hemming.
 Effective implementation of error proofing and their sustenance.
 Able to adapt computer program solutions to improve efficiency and effectiveness,
organizing records, and compiling reports
 Performed routine maintenance inspections of equipment to identify and respond to
problems in a timely manner, thus preventing breakdowns
 Worked with company’s vendors and supervised subcontractors during various
maintenance projects to ensure proper and safe completion of work performed
EDUCATIONAL QUALIFICATIONS
DEGREE % BOARD/UNI. Year of passing
BE-(MECH) 66.86 M.S.U Apr’10
HSC 76.40 GHSEB Mar ‘06
SSC 81.86 GSHEB Mar ‘04
ACADEMICS ACHIEVEMENTS AND TRAININGS UNDERGONE
 Have completed PTC certified diploma course in PRO/Engineer and AutoCAD.
 Have knowledge Fanuc Robot Programming and PLC Programming
 Have completed 8085 Microprocessor And Its Applications, at ITI-TARASALI,
Vadodara.
 Have completed the Basics of Pneumatics course organized by Festo engineering
Ahmedabad.
 Have undergone training on Fundamentals of vibration analysis from SKF.
PERSONAL DETAILS
Name : Kalpesh B Parmar
Address : D-201, Darshanam Oasis, New VIP Road, Vadodara
Contact no : +91-9099480248.
Date of Birth : 26 July, 1988.
Marital Status : Married
Linguistic Abilities : English, Hindi and Gujarati, Marathi
DECLARATION:
pkalpesh5822@gmail.com Page 3 of 3
+91-9099480248

4. I hope and trust that considering above qualifications & experience, you will give me an
opportunity to serve under your kind control. I am sure that if given an opportunity, I shall
prove my worthiness by sincerity, commitment and output with a positive attitude.
pkalpesh5822@gmail.com Page 4 of 3
+91-9099480248