1. RESUME
Nasser Rabie AbdElHamid
Address El-Gharak Bahry Etssa El-
Fayoum Egypt.
Mobile: +20 1007058143 +20
1226957775
Home: +20 846470200
nasserabumido@gmail.com
Brief profile: Mechanical Engineering graduate with a total experience of 20 Yrs. in Maintenance and
Material Management in both onshore and offshore oil and gas production facility. Considerable exposure to
multi nationals work environment. Has a capacity of leading multi discipline team in both maintenance and
material sub-organization. Capable to prepare and instruct technical mechanical training courses materials.
Personal information:
Religion Moslem
Nationality Egyptian
Date of birth 15/3/1971
Marital Status Married + 4 kids
Military Status Completed
Education B.Sc. of Mechanical Engineering (Power)
EL-Mania university (July, 1993)
Grade good
Languages Arabic: native - English: V. Good
Key competencies / Skills
• Microsoft windows
• Microsoft office (Word, Excel, Access, Power Point & MS Outlook)
• Internet purchasing , products searching and vendor correspondences
• CMMS experience (MAXIMO)
• Experience in oil and gas plants.
• Self-confident leader.
• Good presentation, communication and training skills.
• Competent in machine faults diagnosis.
• Good report writing, failure analysis report.
• Persistence in work in order to achieve and get things done.
• Ability to effectively organize, lead and motivate a team to achieve a specific goal.
• Ability to work under high pressure.
• Ambitious, have a high understanding capability and seeks new knowledge and experiences.
• Prepare the contractors evaluation.
• Good knowledge in standards and coding for mechanical
• Good football player.
Job History:
Oct. 15 – Present Oil and Gas Skills (OGS)
May 06 – Oct. 15 Abu Dhabi Company for Onshore Oil Operation (ADCO)
Oct. 04 – May 06 Ganoub El Wadi Holding Petroleum Co.
May 98 – Oct. 04 Gulf of Suez Petroleum Company (GUPCO)
May 95 – May 98 Egyptian Italian Company for garments (EIG)

2. Details Experience & Responsibility
From Dec. 15 – Present (OGS)
OGS (Oil and Gas Skills) is a joint venture owned in equal shares by the Egyptian general petroleum corporation EGPC,
Egyptian natural gas holding company EGAS, Egyptian petrochemical holding company ECHEM, ENPPI, GASCO and PETROJET.
Mechanical On Job Trainer in Competency assurance management system project @ Badr Petroleum Company.
Mechanical On Job Trainer
• Maintains safe and healthy training environment by following organization standards and legal
regulations.
• Identify training needs and develop training program, prepare training materials in Plant Operation
and Maintenance, Pumps and Compressors, Prime Movers.
• Performs practical and theoretical assessment in accordance to approved quality standards.
• Conduct theoretical and practical training skills in the following : Engineering Maintenance , Pumps,
Compressor, Prime Movers and Valves
• Insure communicate clearly, effectively and comprehensibly in the language in which the training is
carried out.
• Able to understand, analyze and manage groups dynamics.
• Conduct assessment on candidates and complete feedback form.
• Advice on training solutions and mentoring courses required to address competence gaps.
• Coaching trainees to achieve their tasks.
• Guide and support the candidate in collection and compilation of evidence.
• Register and maintain candidates’ portfolio.
• Prepare weekly and monthly progress reports.
From May 2006 – October 2015 (ADCO)
ADCO (Abu Dhabi Company for Onshore Petroleum Operation) is one of ADNOC group which own by UAE
government.
Maintenance Engineer and Material coordinator at Gas and Water injection @ ASAB filed (600,000
BPD of oil production and 900 MMSCFPD of gas production) with the following duties and
responsibilities:
Maintenance Engineer
• Plan and schedule Maintenance activity (preventive and corrective activity) for all mechanical
equipment (Pumps- Air compressor- Gas Reciprocating Compresses - Chemical pumps – Motorized
valves – Valves gear box – Safety relief valves – Heat exchanger and fan coolers).
• Prioritize maintenance activity according to the equipment criticality (safety and production).
• Supervise maintenance team day to day execution of the maintenance program as well as
troubleshooting of rotating equipment within area of responsibility including issuing necessary
PTW, certificates & TRA.
• Follow up major repairs / overhauls at contractors’ workshops and attend critical activities
including Gas turbines and compressors major inspections 12K and 24K.
• Technical study for chronic problems and proposing possible engineering solutions.
• Follow up the stock level of all the necessary spare parts for rotating equipment within area of
responsibility.
• Prepare Spare Parts Interchange-ability Record (SPIR) for any new/upgrade Projects.
• Provide the necessary feedback of the performed activities to the CMMS (MAXIMO & SAP)
system including used spares, man power, tools, job duration, …
• Comply with Maintenance Compliance Factor (MCF) on monthly basis and work to keep MCF in
high performance and overhead targets.

3. • Insure all maintenance KPIs (maintenance cost, corrective work order percentage and man hour’s
utilization) is achieved.
• Dynamically updating the maintenance standard procedures for the equipment within area of
responsibility.
• Budget forecasting (OPEX / CAPEX) with necessary procedures.
• Ensure that all safety precautions are in place.
• Carry out trouble shooting for mechanical equipment as well as vibration analysis and failure root
cause analysis.
• Carry out necessary modifications to enhance the reliability of equipment such as:
- Mechanical seal buffer system auto control instead of manual control.
- Main lube oil pump upgrade of surface water injection pumps to avoid repeated failures.
• Participate as team member of major shut team, preparing shut down activity and activity duration
list , Shutdown spare parts preparation and order to ensure the availability of materials timely
adhere , follow up shut down progress , cooperation with sister company and contractors to
complete shutdown activity within shut down window.
• Carry out vessels and heat exchangers preparation for inspection and repair (positive isolation and
cleaning).
• Commissioning and startup of water injection facility upgrade project.
• Issued punch lists for different Mechanical systems & equipment during and after their
commissioning stages to fix their problems before handover from contractor.
• Carry out bids Technical Evaluation and recommend with justifications for the accepted or the
refused bids.
• Act as maintenance team leader during original team leader vacation.
• Carry out annual staff appraisals.
• Giving full support to coach Notional stuff.
From OCT. 2004 – May 06 (GANOPE)
GANOPE is one of five main entities of Petroleum Ministry and GANOPE is charged with all petroleum
activities in the south area of EGYPT
During this period:
• Monitors / review maintenances plans of subsidiary companies to insure consistency with the
corporate production forecast.
• Review maintenance strategies and police of subsidiary company.
• Standardize / optimize operating spare parts management of subsidiary company.
• Provide occasional technical support to subsidiary company such as:
 Commissioning and Start up "Compressors project" at WEPCO and Overhauling.
Detail of this Project:
- Borescope Check for internal component (bearings, seals, clearance, mechanical run out, no
corrosion…..etc.).
- Insure that there is no problem to reload again after preserved 11 Yrs.
 Supervision overhaul and commissioning of Gas compression station (Waukesha engine and
Hanover reciprocating compressor) at Hayat filed for Khalda Petroleum Company
Detail of this Project:
- Complete engine overhaul (Waukesha 7042) and complete reciprocating compressor overhaul.
From May 1998 – Oct. 04 ( GUPCO)
GUPCO (The Gulf of Suez Petroleum Company) is a joint venture owned in equal shares by BP and EGPC
(The Egyptian General Petroleum Company).
GUPCO is responsible for Oil and Gas production in the Gulf of Suez, the Western Desert and the Nile Delta
Duties and responsibilities as Mechanical Maintenance Section Head @ Ras Shuker Filed during this
period as the following:

4. • Head of pump and Reciprocating equipment workshop supervising and monitoring the activities of
75 sub-ordinates. Over 75 unit of reciprocating engines / compressors and 666 pumps were under
my responsibility.
• Monitoring operation of different types , application and different sizes of pumps and reciprocating
equipment (Fresh water pump ,high capacity Crude oil pumps, sea water injection pumps ,
chemical pumps), (gas engine and diesel engine which service as drive for electric generator ,crude
oil pumps ,fire water pumps and reciprocating gas compressors).
• Maintenance, overhauling and troubleshooting for pumps (Goulds pump , Sulzer Bingham pumps ,
Milton ray chemical pumps, Byron Jackson pumps , Dresser Rand pumps) ,reciprocating equipment
(manufactured by Waukesha and Caterpillar Company and reciprocating air compressors and rotary
air compressors different size manufactured by I. R. company) and gear boxes (Philadelphia gear
box and Lufkin gear boxes).
• Balance different types of centrifugal multistage pump rotors using PLC balancing machines (IRD
model 290C).
• Field alignment between pumps, gear boxes and engine (Electric motor & Diesel engines and Gas
turbines
• Pumps and reciprocating equipment selection studies and all related paper work.
• Prepares annual maintenance budget (OPEX / CAPEX) plans for Maintenance department.
• Control spare Parts Material Min/ Max required for safe operation.
• Control and record maintenance activity using MAXIMO program software.
From May 95 – May 98 Egyptian Italian Company for garments EIG
EIG is one of ARAFA group for Luxury, Formal and Casual Wear.
Working as maintenance engineer with the following duties and responsibility:
• Maintain different types of garment machines.
• Overhauling and troubleshooting of garment machines
• Follow up the availability of all the necessary spare parts.
• Select and order modern garment machines.
Part Time Freelancer Instructor
Participated in the Ministry of Petroleum Program to prepare the clever worker for Petroleum fields.
Prepare technical material and instruct the following courses several times through different training
company (OGS, GESCO, EMC, E-Gas):
 Pump maintenance and operation.
 Seals and mechanical seals.
 Maintenance and troubleshooting for rotating equipment.
 Sucker rod pump system.
 Alignment of rotating equipment.
Engineering
 Awareness of relevant international codes and standards related to the area of specialty.
 Able to lead specialized studies in a cost-effective manner.
 Propose practical solutions for mechanical problems to help improve safety and reliability.
Training Courses
•One month Training course @ PETRONAS Company in Malaysia. The course was combination of
safety, maintenance and reliability.
•Field alignment between pumps, gear boxes and engine (Electric motor & Diesel engines and Gas
turbines)

5. •Balancing different types of centrifugal multistage pump rotors using PLC balancing machines (IRD
model 290C).
•Pump & compressor maintenance (Society of Mechanical engineers [SME])
•Hydraulic control system training (Cairo university)
•Failure analysis training (Cairo university)
•Mechanical seal (Cairo university)
•Mechanical seal (John Crane agent)
•CMMS (computerized maintenance management system) MAXIMO software.
•Various safety training courses
 Fire fighting
 Helicopter safety
 Safety Audit & Site Inspection
 H2S course and Breathing apparatuses
 HSE Spotting Hazards
•Permit to Work -Site Supervisor
•Problem Solving & Decision Making
•Electric Submersible Pump Systems Design, Diagnosis
•Metallurgy & Material Selection.
•Train the Trainer.
•Vibration Analysis & Condition Monitoring. (Bentley Nevada).
•GE turban performance evaluation condition monitoring, troubleshooting & major maintenance
planning. (AnsaldoThomassen)
•Advanced HAZOP Analysis
•Effective Communication Skills
•Mechanical Seals Design and Application
•ASME, Process Piping, Valves, Flanges & Fitting Standard

6. •Balancing different types of centrifugal multistage pump rotors using PLC balancing machines (IRD
model 290C).
•Pump & compressor maintenance (Society of Mechanical engineers [SME])
•Hydraulic control system training (Cairo university)
•Failure analysis training (Cairo university)
•Mechanical seal (Cairo university)
•Mechanical seal (John Crane agent)
•CMMS (computerized maintenance management system) MAXIMO software.
•Various safety training courses
 Fire fighting
 Helicopter safety
 Safety Audit & Site Inspection
 H2S course and Breathing apparatuses
 HSE Spotting Hazards
•Permit to Work -Site Supervisor
•Problem Solving & Decision Making
•Electric Submersible Pump Systems Design, Diagnosis
•Metallurgy & Material Selection.
•Train the Trainer.
•Vibration Analysis & Condition Monitoring. (Bentley Nevada).
•GE turban performance evaluation condition monitoring, troubleshooting & major maintenance
planning. (AnsaldoThomassen)
•Advanced HAZOP Analysis
•Effective Communication Skills
•Mechanical Seals Design and Application
•ASME, Process Piping, Valves, Flanges & Fitting Standard