2. NAME Name of the antenna. Must be the same as the filename.
FREQUENCY Design frequency of the antenna.
GAIN Antenna gain followed by either dBi or dBd (isotropic or dipole).
TILT Indicates whether the antenna is to be electrically or mechanically tilted.
Set to either ELECTRICAL or MECHANICAL.
HORIZONTAL The number ‚n‘ following indicates that the next ‚n‘ lines of data correspond the
horizontal radiation pattern.
VERTICAL The number ‚n‘ following indicates that the next ‚n‘ lines of data correspond the
vertical radiation pattern.
COMMENT A single line of comments. Includes the date of measurement and any other additional
information.
The antenna values are in the form:
Angle [deg] Loss [dB]
Where the angle must be from 0 to 360 degrees. The interval may vary but must not be smaller than 0.5 degrees.
The loss values must be positive.
The diagrams below should help clarify the meaning of each field:
0 270
dB
dB
3 3
10 10
270 90 180 0
180 90
Horizontal Mask (Plan View) Vertical Tilt Mask (Side View)
Note for users of MSI prediction tool PLANET:
Above description refer to Planet Version 2.5 database but can still be used by later versions of Planet.
Additional lines in the header of later Planet versions are without any effect on function of program.
AEM/Hb 14.12.00