PBA Systems designs and manufactures motion control products including linear servo motors. The DX B Series are ironless linear motors that provide high force in a compact size for point-to-point motion systems. The DX20B motor has a peak force up to 183N, continuous force up to 60N, and is integrated with a Hall sensor. It is ideal for high precision and smooth motion applications. Specifications include performance metrics, electrical characteristics, thermal properties, and mechanical dimensions.
Stability under Large-Signal Conditions PresentationNMDG NV
This presentation demonstrates calibrated small-signal S-parameters extraction under large-signal conditions, performed in parallel with the calibrated large-signal measurements provided by the ZVxPlus nonlinear extension kits.
The extracted S-parameters allow calculating the different stability criteria as well as the stability circles over the full frequency bandwidth of the selected network analyser.
Stability under Large-Signal Conditions PresentationNMDG NV
This presentation demonstrates calibrated small-signal S-parameters extraction under large-signal conditions, performed in parallel with the calibrated large-signal measurements provided by the ZVxPlus nonlinear extension kits.
The extracted S-parameters allow calculating the different stability criteria as well as the stability circles over the full frequency bandwidth of the selected network analyser.
IDT's RF to IF downconversion dual mixers significantly benefit BaseStation vendors and operators. Featuring IDT Zero-Distortion™ technology, intermodulation Distortion is reduced up to 19 dB (98% at the device level, 83% at the system level) while power consumption is reduced up to 40% to 1150 mW. IDT's RF to IF downconverting mixers are pin compatible with competitor's devices and are offered in 3 versions to cover any of the UTRA bands from 700 MHz to 2700 MHz allowing for a compelling upgrade option. Presented by Chris Stephens, Marketing Director, Integrated Device Technology, Inc. Learn more at http://www.idt.com/go/RF.
Similar to DX B Ironless Linear Motor - PBASystems (20)
MaxMotion Motion Control Card - Digital Servo Controljuliangoal
Theontrol Card was de MaxMotion Precision Motion Csigned for high-performance PC-based (PCI-bus ) multi-axis motion control applications, which require up to 4 axes of analog servo control and up to 4 axes of pulse stepper control.
High-performance PC-based multi-axis motion control cardsjuliangoal
The MaxMotion Precision Motion Control Card was designed for high-performance PC-based (PCI-bus ) multi-axis motion control applications, which require up to 4 axes of analog servo control and up to 4 axes of pulse stepper control.
B2B payments are rapidly changing. Find out the 5 key questions you need to be asking yourself to be sure you are mastering B2B payments today. Learn more at www.BlueSnap.com.
Building Your Employer Brand with Social MediaLuanWise
Presented at The Global HR Summit, 6th June 2024
In this keynote, Luan Wise will provide invaluable insights to elevate your employer brand on social media platforms including LinkedIn, Facebook, Instagram, X (formerly Twitter) and TikTok. You'll learn how compelling content can authentically showcase your company culture, values, and employee experiences to support your talent acquisition and retention objectives. Additionally, you'll understand the power of employee advocacy to amplify reach and engagement – helping to position your organization as an employer of choice in today's competitive talent landscape.
Event Report - SAP Sapphire 2024 Orlando - lots of innovation and old challengesHolger Mueller
Holger Mueller of Constellation Research shares his key takeaways from SAP's Sapphire confernece, held in Orlando, June 3rd till 5th 2024, in the Orange Convention Center.
At Techbox Square, in Singapore, we're not just creative web designers and developers, we're the driving force behind your brand identity. Contact us today.
3.0 Project 2_ Developing My Brand Identity Kit.pptxtanyjahb
A personal brand exploration presentation summarizes an individual's unique qualities and goals, covering strengths, values, passions, and target audience. It helps individuals understand what makes them stand out, their desired image, and how they aim to achieve it.
Top mailing list providers in the USA.pptxJeremyPeirce1
Discover the top mailing list providers in the USA, offering targeted lists, segmentation, and analytics to optimize your marketing campaigns and drive engagement.
Anny Serafina Love - Letter of Recommendation by Kellen Harkins, MS.AnnySerafinaLove
This letter, written by Kellen Harkins, Course Director at Full Sail University, commends Anny Love's exemplary performance in the Video Sharing Platforms class. It highlights her dedication, willingness to challenge herself, and exceptional skills in production, editing, and marketing across various video platforms like YouTube, TikTok, and Instagram.
An introduction to the cryptocurrency investment platform Binance Savings.Any kyc Account
Learn how to use Binance Savings to expand your bitcoin holdings. Discover how to maximize your earnings on one of the most reliable cryptocurrency exchange platforms, as well as how to earn interest on your cryptocurrency holdings and the various savings choices available.
LA HUG - Video Testimonials with Chynna Morgan - June 2024Lital Barkan
Have you ever heard that user-generated content or video testimonials can take your brand to the next level? We will explore how you can effectively use video testimonials to leverage and boost your sales, content strategy, and increase your CRM data.🤯
We will dig deeper into:
1. How to capture video testimonials that convert from your audience 🎥
2. How to leverage your testimonials to boost your sales 💲
3. How you can capture more CRM data to understand your audience better through video testimonials. 📊
In the Adani-Hindenburg case, what is SEBI investigating.pptxAdani case
Adani SEBI investigation revealed that the latter had sought information from five foreign jurisdictions concerning the holdings of the firm’s foreign portfolio investors (FPIs) in relation to the alleged violations of the MPS Regulations. Nevertheless, the economic interest of the twelve FPIs based in tax haven jurisdictions still needs to be determined. The Adani Group firms classed these FPIs as public shareholders. According to Hindenburg, FPIs were used to get around regulatory standards.
Digital Transformation and IT Strategy Toolkit and TemplatesAurelien Domont, MBA
This Digital Transformation and IT Strategy Toolkit was created by ex-McKinsey, Deloitte and BCG Management Consultants, after more than 5,000 hours of work. It is considered the world's best & most comprehensive Digital Transformation and IT Strategy Toolkit. It includes all the Frameworks, Best Practices & Templates required to successfully undertake the Digital Transformation of your organization and define a robust IT Strategy.
Editable Toolkit to help you reuse our content: 700 Powerpoint slides | 35 Excel sheets | 84 minutes of Video training
This PowerPoint presentation is only a small preview of our Toolkits. For more details, visit www.domontconsulting.com
Premium MEAN Stack Development Solutions for Modern BusinessesSynapseIndia
Stay ahead of the curve with our premium MEAN Stack Development Solutions. Our expert developers utilize MongoDB, Express.js, AngularJS, and Node.js to create modern and responsive web applications. Trust us for cutting-edge solutions that drive your business growth and success.
Know more: https://www.synapseindia.com/technology/mean-stack-development-company.html
2. 1 1
5018538 5018350
8
PBA SYSTEMS, a member of the PBA Group,
designs and manufactures motion control products,
including linear servo motors, linear motor modules,
piezo stages, large XYZ Theta stages and special
customized solutions.
PBA Systems also distributes complementing products
such as controllers, servo amplifiers, encoders, air
bearings, etc, to provide complete solutions to our
customers. Our focus in quality products and sound
technical support has earned us a reputation of being a
reliable motion control partner for our customers.
M A K E S A D I F F E R E N C E
PAGE 02
3. Founded in 1999, PBA Systems has steadily grown into a leading global supplier of high performance
motion control components and systems.
BRANCH OFFICE
GLOBAL SUPPORT
With world wide distrbutors and local offices spanning across the
globe. PBA SYSTEMS products are well covered.
MAKING IT GOOD & MAKING IT CHEAP
We are vertically integrated with China factories to supply the
motor magnets.
South East Asian factories for machining and assembly.
DISTRIBUTORS
FAST REACTION & SHORT LEAD TIME
We hold vast stocks of work in progress parts.
We are equipped to accomodate highly customised designs.
PBA staffs work around the clock to deliver goods on time.
PAGE 03
4. SYSTEMS MAKES A DIFFERENCE
w w w. p b a s y s t e m s. com. s g
DX B Series
Linear Motors Highest Force in Compact Size for Point-to-Point Motion Systems PA R T N U M B E R I N G
DX Series Part Numbering System
DX B SERIES
Coil Assembly
DX50B – C4 – P – TM – 2.0 – A – FC – HC
Motor Model Motor Connection Cable
Coil Size Thermal Protection Cooling Type Option #1 Option #2
Type Length
DX10B C1 S - Series TM - Thermostat 2.0 m Blank - Standard FC - Ferrite Core HC -
Type (Standard) Hall Connector
DX20B Available as a standard for (No cooling) (Standard)
C2
DX30B DX30B, DX30BT, DX50B,
DX50BT, DX65B, DX65BT,
DX30BT C3 DX90B, DX95BT 3.0 m
(Not available for DX20B)
DX50B
C4 Blank - Blank – No HC
DX50BT P - Parallel TC - PT 100 Sensor A - Air Cooling Without Ferrite
DX65B C5 Core
Available as a standard for (Not
5.0 m
DX65BT DX10B, DX20B Recommended)
: (Optional for DX30B,
DX90B DX30BT, DX50B, DX50BT,
DX65B, DX65BT, DX90B,
DX90BT DX90BT)
Remarks:
TM – On/Off switch
TC – With a simple temperature controller (e.g. Omron), user can read the temperature all the time on a display. User can also set a temperature in
the controller to trigger an output
Minimum Bending Radius - 10 times of cable diameter
Magnet Track DX50B – TL300 – K2
Motor Model Magnet Track Length Magnet Track Length
DX10B TL180 - 180mm Blank -
No Customization
DX20B
DX30B
TL300 - 300mm
DX30BT
DX50B
DX50BT TL600 - 600mm K1, K2, K3, K4,
K5, K6.. -
DX65B Customized according to
customer’s specifications
DX65BT
TL900 - 900mm
DX90B
DX90BT
Remarks:
Track length in incremental of 60mm
We reserve the right to make technical changes at any time without prior notice
PAGE 04
5. SYSTEMS MAKES A DIFFERENCE
w w w. p b a s y s t e m s. com. s g
DX B Series
Linear Motors Highest Force in Compact Size for Point-to-Point Motion Systems S P E C I F I C AT I O N S
DX 10B
• Ironless Motor
DX B SERIES
• Peak force to 50N, Continuous force to 12N
• Ideal for high precision/smooth motion
Performance
Unit DX10B-C1 DX10B-C2 DX10B-C3 DX10B-C4
S S S S
Peak Force N 12.7 25.3 38.0 50.6
Continuous Force @ 120ºC* N 3.2 6.3 9.5 12.7
Peak Power @ 120ºC W 202 404 606 808
Continuous Power @ 120ºC* W 12.6 25.2 37.9 50.5
Electrical
Unit DX10B-C1 DX10B-C2 DX10B-C3 DX10B-C4
S S S S
Peak Current Apk 11.20 11.20 11.20 11.20
Continuous Current @ 120ºC* Apk 2.80 2.80 2.80 2.80
Continuous Stall Current @ 120ºC* Arms 1.98 1.98 1.98 1.98
Force Constant N/Apk 1.1 2.3 3.4 4.5
Back EMF Constant Vpk/m/s 1.3 2.6 3.9 5.2
Coil Resistance L-L @ 25ºC ohm 1.6 3.1 4.7 6.2
Coil Resistance L-L @ 120ºC* ohm 2.1 4.3 6.4 8.6
Inductance L-L @ 1kHz mH 0.11 0.22 0.33 0.44
Motor Constant @ 120ºC* N/√W 0.9 1.3 1.5 1.8
Max. Terminal Voltage Vdc 60 60 60 60
Thermal
Unit DX10B-C1 DX10B-C2 DX10B-C3 DX10B-C4
S S S S
Thermal Resistance @ 120ºC* ºC/W 7.53 3.76 2.51 1.88
Max. Coil Temperature ºC 120 120 120 120
Mechanical
Unit DX10B-C1 DX10B-C2 DX10B-C3 DX10B-C4
S S S S
Coil Weight kg 0.02 0.04 0.06 0.08
Coil Length mm 22 43 64 85
Attractive Force N 0 0 0 0
Electrical Cycle Length mm 21 21 21 21
Notes:
1. Apk = 1.414 * Arms; Vpk = 1.414 * Vrms.
2. * Ambient temperature 25ºC, natural convection, no heat sink.
3. Specifications tolerance – inductance +/-30%, all others +/-10%.
We reserve the right to make technical changes at any time without prior notice
PAGE 05
6. SYSTEMS MAKES A DIFFERENCE
w w w. p b a s y s t e m s. com. s g
DX B Series
Linear Motors Highest Force in Compact Size for Point-to-Point Motion Systems S P E C I F I C AT I O N S
DX 10B
DX B SERIES
COIL LENGTH
E-M2.5 5.0
A(PITCH) 5.0
MOTOR CABLE
14.0
21.6
COMBINE TRACKS
0.3
9.9
CLEARANCE
36.0
25.4
3.5
42.0 21.0(PITCH) 20.9 21.6
TRACK LENGTH
G- 3.5 THRU
6.0 3.0 BOTH SIDES
21.0 21.0(PITCH) 13.85
10.8
H- M3 THRU'
DX10B Standard Magnet Track
SIZE TRACK LENGTH TL (mm) WEIGHT (kg) MOUNT HOLE G (ea) MOUNT HOLE H (ea)
TL 63 62.7 0.15 2 3
TL 84 83.7 0.20 3 4
TL 105 104.7 0.25 4 5
TRACK WEIGHT = 0.15kg PER 63mm.
DX10B Motor Coil
SIZE COIL LENGTH CL (mm) WEIGHT (kg) MOUNT HOLE E (ea) MOUNT HOLE A (ea)
C1 22.0 0.02 4 12.0
C2 43.0 0.04 6 16.0
C3 64.0 0.06 8 16.0
C4 85.0 0.08 10 16.0
For COOLING OPTIONS, please ask for detail drawing.
We reserve the right to make technical changes at any time without prior notice
PAGE 06
7. SYSTEMS MAKES A DIFFERENCE
w w w. p b a s y s t e m s. com. s g
DX B Series
Linear Motors Highest Force in Compact Size for Point-to-Point Motion Systems S P E C I F I C AT I O N S
DX 20B
• Ironless Motor
DX B SERIES
• Peak force to 183N, Continuous force to 60N
• Integrated with Hall Sensor
• Ideal for high precision/smooth motion
Performance
Unit DX20B-C2 DX20B-C3 DX20B-C4 DX20B-C5
S P S P S P S P
Peak Force N 73 73 110 110 146 146 183 183
Continuous Force @ 120ºC* N 18 18 27 27 37 37 46 46
Continuous Force AC @ 120ºC^ N 24 24 36 36 48 48 60 60
Peak Power @ 120ºC W 476 476 714 714 952 952 1190 1190
Continuous Power @ 120ºC* W 30 30 45 45 60 60 74 74
Continuous Power AC @ 120ºC^ W 50 50 75 75 101 101 126 126
Electrical
Unit DX20B-C2 DX20B-C3 DX20B-C4 DX20B-C5
S P S P S P S P
Peak Current Apk 8.40 16.80 8.40 16.80 8.40 16.80 8.40 16.80
Continuous Current @ 120ºC* Apk 2.10 4.20 2.10 4.20 2.10 4.20 2.10 4.20
Continuous Current AC @ 120ºC^ Apk 2.73 5.46 2.73 5.46 2.73 5.46 2.73 5.46
Continuous Stall Current @ 120ºC* Arms 1.40 2.80 1.40 2.80 1.40 2.80 1.40 2.80
Force Constant N/Apk 8.7 4.4 13.1 6.5 17.4 8.7 21.8 10.9
Back EMF Constant Vpk/m/s 10.0 5.0 15.0 7.5 20.1 10.0 25.1 12.5
Coil Resistance L-L @ 25ºC ohm 6.5 1.6 9.8 2.4 13.0 3.3 16.3 4.1
Coil Resistance L-L @ 120ºC* ohm 9.0 2.2 13.5 3.4 18.0 4.5 22.5 5.6
Inductance L-L @ 1kHz mH 1.53 0.38 2.30 0.57 3.06 0.77 3.83 0.96
Motor Constant @ 120ºC* N/√W 3.4 3.4 4.1 4.1 4.7 4.7 5.3 5.3
Max. Terminal Voltage Vdc 400 400 400 400 400 400 400 400
Thermal
Unit DX20B-C2 DX20B-C3 DX20B-C4 DX20B-C5
S P S P S P S P
Thermal Resistance @ 120ºC* ºC/W 3.19 3.19 2.13 2.13 1.60 1.60 1.28 1.28
Thermal Resistance AC @ 120ºC^ ºC/W 1.89 1.89 1.26 1.26 0.94 0.94 0.76 0.76
Max. Coil Temperature ºC 120 120 120 120 120 120 120 120
Mechanical
Unit DX20B-C2 DX20B-C3 DX20B-C4 DX20B-C5
S P S P S P S P
Coil Weight kg 0.11 0.11 0.17 0.17 0.23 0.23 0.28 0.28
Coil Weight AC^ kg 0.11 0.11 0.17 0.17 0.23 0.23 0.28 0.28
Coil Length mm 61 61 91 91 121 121 151 151
Attractive Force N 0 0 0 0 0 0 0 0
Electrical Cycle Length mm 30 30 30 30 30 30 30 30
Notes:
1. Apk = 1.414 * Arms; Vpk = 1.414 * Vrms.
2. * Ambient temperature 25ºC, natural convection, no heat sink.
4. Specifications tolerance – inductance +/-30%, all others +/-10%.
We reserve the right to make technical changes at any time without prior notice
PAGE 07
8. SYSTEMS MAKES A DIFFERENCE
w w w. p b a s y s t e m s. com. s g
DX B Series
Linear Motors Highest Force in Compact Size for Point-to-Point Motion Systems S P E C I F I C AT I O N S
DX 20B
DX B SERIES
121.0(C4)
91.0(C3)
61.0(C2)
16.6
D- M3 7.0
36.5 3.0
73.0 37.5
COIL LENGTH CL
109.5
10.5
10.5
0.0
2.3
7.5
73.0
FLEXIBLE CABLE 5.6 FOR POWER
3.0 E -M3 THRU 36.5 M3 6.0
CABLE OUT FLEXIBLE CABLE 3.3 FOR HALL
6.0
55.6
52.0
51.3
39.1
38.1
4.6
7.9
0.0
B -M4 THRU 60.0(PITCH) 29.85
10.6
10.6
0.0
6.0 3.2(BOTH SIDES)
TRACK LENGTH TL
60.0(PITCH) 29.85
A-M5 THRU
DX20B Standard Magnet Track
SIZE TRACK LENGTH TL (mm) WEIGHT (kg) MOUNT HOLE A (ea) MOUNT HOLE B (ea)
TL 120 119.7 0.44 2 2
TL 180 179.7 0.66 3 3
TL 240* 239.7 0.88 4 4
TL 300 299.7 1.10 5 5
TL 360 359.7 1.32 6 6
TL 480 479.7 1.76 8 8
*EX-STOCK LENGTH
TRACK WEIGHT = 0.22kg PER 60mm.
DX20B Motor Coil
SIZE COIL LENGTH CL (mm) WEIGHT (kg) MOUNT HOLE D (ea) MOUNT HOLE E (ea)
C2 61.0 0.11 3 2
C3 91.0 0.17 5 3
C4 121.0 0.23 7 4
C5 151.0 0.28 9 5
For COOLING OPTIONS, please ask for detail drawing.
We reserve the right to make technical changes at any time without prior notice
PAGE 08
9. SYSTEMS MAKES A DIFFERENCE
w w w. p b a s y s t e m s. com. s g
DX B Series
Linear Motors Highest Force in Compact Size for Point-to-Point Motion Systems S P E C I F I C AT I O N S
DX 30B / DX 30BT
• Ironless Motor
DX B SERIES
• Peak force to 579N, Continuous force to 188N
• Integrated with Hall Sensor
• Ideal for high precision/smooth motion
Performance
Unit DX30B-C1 DX30B-C2 DX30BT-C2 DX30B-C3
S P S P P S P
Peak Force N 116 116 232 232 232 347 347
Continuous Force @ 120ºC* N 29 29 58 58 58 87 87
Continuous Force AC @ 120ºC^ N 38 38 75 75 75 113 113
Peak Power @ 120ºC W 445 445 890 890 890 1335 1335
Continuous Power @ 120ºC* W 28 28 56 56 56 83 83
Continuous Power AC @ 120ºC^ W 47 47 94 94 94 141 141
Electrical
Unit DX30B-C1 DX30B-C2 DX30BT-C2 DX30B-C3
S P S P P S P
Peak Current Apk 9.45 18.90 9.45 18.90 37.80 9.45 18.90
Continuous Current @ 120ºC* Apk 2.36 4.73 2.36 4.73 9.45 2.36 4.73
Continuous Current AC @ 120ºC^ Apk 3.07 6.14 3.07 6.14 12.29 3.07 6.14
Continuous Stall Current @ 120ºC* Arms 1.75 3.50 1.75 3.50 7.00 1.75 3.50
Force Constant N/Apk 12.3 6.1 24.5 12.3 6.1 36.8 18.4
Back EMF Constant Vpk/m/s 14.1 7.0 28.2 14.1 7.0 42.3 21.1
Coil Resistance L-L @ 25ºC ohm 4.8 1.2 9.6 2.4 0.6 14.4 3.6
Coil Resistance L-L @ 120ºC* ohm 6.6 1.7 13.3 3.3 0.8 19.9 5.0
Inductance L-L @ 1kHz mH 3.00 0.75 6.00 1.50 0.38 9.00 2.25
Motor Constant @ 120ºC* N/√W 5.5 5.5 7.8 7.8 7.8 9.5 9.5
Max. Terminal Voltage Vdc 400 400 400 400 400 400 400
Thermal
Unit DX30B-C1 DX30B-C2 DX30BT-C2 DX30B-C3
S P S P P S P
Thermal Resistance @ 120ºC* ºC/W 3.42 3.42 1.71 1.71 1.71 1.14 1.14
Thermal Resistance AC @ 120ºC^ ºC/W 2.02 2.02 1.01 1.01 1.01 0.67 0.67
Max. Coil Temperature ºC 120 120 120 120 120 120 120
Mechanical
Unit DX30B-C1 DX30B-C2 DX30BT-C2 DX30B-C3
S P S P P S P
Coil Weight kg 0.21 0.21 0.41 0.41 0.43 0.62 0.62
Coil Weight AC^ kg 0.23 0.23 0.46 0.46 0.48 0.69 0.69
Coil Length mm 61 61 121 121 121 181 181
Attractive Force N 0 0 0 0 0 0 0
Electrical Cycle Length mm 60 60 60 60 60 60 60
Notes:
1. Apk = 1.414 * Arms; Vpk = 1.414 * Vrms.
2. * Ambient temperature 25ºC, natural convection, no heat sink.
3. ^ Air cool (AC), 6mm/4mm (OD/ID) 2m long air hose, pressure >2bar.
4. Specifications tolerance – inductance +/-30%, all others +/-10%.
We reserve the right to make technical changes at any time without prior notice
PAGE 09
10. SYSTEMS MAKES A DIFFERENCE
w w w. p b a s y s t e m s. com. s g
DX B Series
Linear Motors Highest Force in Compact Size for Point-to-Point Motion Systems S P E C I F I C AT I O N S
DX 30B / DX 30BT
• Ironless Motor
DX B SERIES
• Peak force to 579N, Continuous force to 188N
• Integrated with Hall Sensor
• Ideal for high precision/smooth motion
Performance
Unit DX30B-C4 DX30BT-C4 DX30B-C5
S P P S P
Peak Force N 463 463 463 579 579
Continuous Force @ 120ºC* N 116 116 116 145 145
Continuous Force AC @ 120ºC^ N 150 150 150 188 188
Peak Power @ 120ºC W 1780 1780 1780 2225 2225
Continuous Power @ 120ºC* W 111 111 111 139 139
Continuous Power AC @ 120ºC^ W 188 188 188 235 235
Electrical
Unit DX30B-C4 DX30BT-C4 DX30B-C5
S P P S P
Peak Current Apk 9.45 18.90 37.80 9.45 18.90
Continuous Current @ 120ºC* Apk 2.36 4.73 9.45 2.36 4.73
Continuous Current AC @ 120ºC^ Apk 3.07 6.14 12.29 3.07 6.14
Continuous Stall Current @ 120ºC* Arms 1.75 3.50 7.00 1.75 3.50
Force Constant N/Apk 49.0 24.5 12.3 61.3 30.6
Back EMF Constant Vpk/m/s 56.4 28.2 14.1 70.4 35.2
Coil Resistance L-L @ 25ºC ohm 19.2 4.8 1.2 24.0 6.0
Coil Resistance L-L @ 120ºC* ohm 26.6 6.6 1.7 33.2 8.3
Inductance L-L @ 1kHz mH 12.00 3.00 0.75 15.00 3.75
Motor Constant @ 120ºC* N/√W 11.0 11.0 11.0 12.3 12.3
Max. Terminal Voltage Vdc 400 400 400 400 400
Thermal
Unit DX30B-C4 DX30BT-C4 DX30B-C5
S P P S P
Thermal Resistance @ 120ºC* ºC/W 0.85 0.85 0.85 0.68 0.68
Thermal Resistance AC @ 120ºC^ ºC/W 0.51 0.51 0.51 0.40 0.40
Max. Coil Temperature ºC 120 120 120 120 120
Mechanical
Unit DX30B-C4 DX30BT-C4 DX30B-C5
S P P S P
Coil Weight kg 0.83 0.83 0.88 1.04 1.04
Coil Weight AC^ kg 0.93 0.93 0.97 1.16 1.16
Coil Length mm 241 241 241 301 301
Attractive Force N 0 0 0 0 0
Electrical Cycle Length mm 60 60 60 60 60
Notes:
1. Apk = 1.414 * Arms; Vpk = 1.414 * Vrms.
2. * Ambient temperature 25ºC, natural convection, no heat sink.
3. ^ Air cool (AC), 6mm/4mm (OD/ID) 2m long air hose, pressure >2bar.
4. Specifications tolerance – inductance +/-30%, all others +/-10%.
We reserve the right to make technical changes at any time without prior notice
PAGE 10
11. SYSTEMS MAKES A DIFFERENCE
w w w. p b a s y s t e m s. com. s g
DX B Series
Linear Motors Highest Force in Compact Size for Point-to-Point Motion Systems S P E C I F I C AT I O N S
DX 30B / 30BT
DX B SERIES
301.0(C5)
241.0(C4)
181.0(C3)
121.0(C2)
61.0(C1)
FLEXIBLE CABLE 5.6 FOR POWER
28.0
FLEXIBLE CABLE 3.3 FOR HALL
2.5
D -M4 THRU
30.0(PITCH) 45.5 M5 10.0 FOR AIR INPUT
35.0
17.5
13.7
17.5
12.0
0.0
COIL LENGTH CL
CABLE OUT (+2.0 for DX 30BT)
68.5 (+2.0 for DX 30BT)
61.2
55.2
4.5
52.1
50.8
20.5
72.6
4.25
8.5
0.0
B -M5 THRU 35.7
60.0(PITCH) 29.75
17.85
0.0
17.85
7.3 6.35(BOTH SIDES)
AIR
TRACK LENGTH TL STANDARD COIL COOLED COIL
60.0 22.25
A -M5 TRHU
DX30B Standard Magnet Track
SIZE TRACK LENGTH TL (mm) WEIGHT (kg) MOUNT HOLE A (ea) MOUNT HOLE B (ea)
TL 120 119.5 1.14 2 2
TL 180 179.5 1.71 3 3
TL 240 239.5 2.28 4 4
TL 300 299.5 2.85 5 5
TL 360 359.5 3.42 6 6
TL 480* 479.5 4.56 8 8
*EX-STOCK LENGTH
TRACK WEIGHT = 0.57kg PER 60mm.
DX30B Motor Coil DX30BT Motor Coil
SIZE COIL LENGTH WEIGHT (kg) WEIGHT (kg) MOUNT SIZE COIL LENGTH WEIGHT (kg) WEIGHT (kg) MOUNT
CL (mm) Air Cool HOLE D (ea) CL (mm) Air Cool HOLE D (ea)
C1 61.0 0.21 0.23 3 C2 121.0 0.43 0.48 7
C2 121.0 0.41 0.46 7 C4 241.0 0.88 0.97 15
C3 181.0 0.62 0.69 11
C4 241.0 0.83 0.93 15
C5 301.0 1.04 1.16 19
For COOLING OPTIONS, please ask for detail drawing.
We reserve the right to make technical changes at any time without prior notice
PAGE 11
12. SYSTEMS MAKES A DIFFERENCE
w w w. p b a s y s t e m s. com. s g
DX B Series
Linear Motors Highest Force in Compact Size for Point-to-Point Motion Systems S P E C I F I C AT I O N S
DX 50B / 50BT
• Ironless Motor
DX B SERIES
• Peak force to 1071N, Continuous force to 348N
• Integrated with Hall Sensor
• Ideal for high precision/smooth motion
Performance
Unit DX50B-C1 DX50B-C2 DX50BT-C2 DX50B-C3
S P S P P S P
Peak Force N 179 179 357 357 357 536 536
Continuous Force @ 120ºC* N 45 45 89 89 89 134 134
Continuous Force AC @ 120ºC^ N 58 58 116 116 116 174 174
Peak Power @ 120ºC W 481 481 961 961 961 1442 1442
Continuous Power @ 120ºC* W 30 30 60 60 60 90 90
Continuous Power AC @ 120ºC^ W 51 51 102 102 102 152 152
Electrical
Unit DX50B-C1 DX50B-C2 DX50BT-C2 DX50B-C3
S P S P P S P
Peak Current Apk 10.50 21.00 10.50 21.00 42.00 10.50 21.00
Continuous Current @ 120ºC* Apk 2.63 5.25 2.63 5.25 10.50 2.63 5.25
Continuous Current AC @ 120ºC^ Apk 3.41 6.83 3.41 6.83 13.65 3.41 6.83
Continuous Stall Current @ 120ºC* Arms 2.10 4.20 2.10 4.20 8.40 2.10 4.20
Force Constant N/Apk 17.0 8.5 34.0 17.0 8.5 51.0 25.5
Back EMF Constant Vpk/m/s 19.6 9.8 39.1 19.6 9.8 58.7 29.3
Coil Resistance L-L @ 25ºC ohm 4.2 1.1 8.4 2.1 0.5 12.6 3.2
Coil Resistance L-L @ 120ºC* ohm 5.8 1.5 11.6 2.9 0.7 17.4 4.4
Inductance L-L @ 1kHz mH 3.11 0.78 6.22 1.56 0.39 9.33 2.33
Motor Constant @ 120ºC* N/√W 8.1 8.1 11.5 11.5 11.5 14.1 14.1
Max. Terminal Voltage Vdc 400 400 400 400 400 400 400
Thermal
Unit DX50B-C1 DX50B-C2 DX50BT-C2 DX50B-C3
S P S P P S P
Thermal Resistance @ 120ºC* ºC/W 3.16 3.16 1.58 1.58 1.58 1.05 1.05
Thermal Resistance AC @ 120ºC^ ºC/W 1.87 1.87 0.94 0.94 0.94 0.62 0.62
Max. Coil Temperature ºC 120 120 120 120 120 120 120
Mechanical
Unit DX50B-C1 DX50B-C2 DX50BT-C2 DX50B-C3
S P S P P S P
Coil Weight kg 0.25 0.25 0.52 0.52 0.54 0.76 0.76
Coil Weight AC^ kg 0.28 0.28 0.57 0.57 0.60 0.85 0.85
Coil Length mm 61 61 121 121 121 181 181
Attractive Force N 0 0 0 0 0 0 0
Electrical Cycle Length mm 60 60 60 60 60 60 60
Notes:
1. Apk = 1.414 * Arms; Vpk = 1.414 * Vrms.
2. * Ambient temperature 25ºC, natural convection, no heat sink.
4. Specifications tolerance – inductance +/-30%, all others +/-10%.
We reserve the right to make technical changes at any time without prior notice
PAGE 12
13. SYSTEMS MAKES A DIFFERENCE
w w w. p b a s y s t e m s. com. s g
DX B Series
Linear Motors Highest Force in Compact Size for Point-to-Point Motion Systems S P E C I F I C AT I O N S
DX 50B / 50BT
• Ironless Motor
DX B SERIES
• Peak force to 1071N, Continuous force to 348N
• Integrated with Hall Sensor
• Ideal for high precision/smooth motion
Performance
Unit DX50B-C4 DX50BT-C4 DX50B-C5 DX50BT-C6
S P P S P P
Peak Force N 714 714 714 893 893 1071
Continuous Force @ 120ºC* N 179 179 179 223 223 268
Continuous Force AC @ 120ºC^ N 232 232 232 290 290 348
Peak Power @ 120ºC W 1922 1922 1922 2403 2403 2884
Continuous Power @ 120ºC* W 120 120 120 150 150 180
Continuous Power AC @ 120ºC^ W 203 203 203 254 254 305
Electrical
Unit DX50B-C4 DX50BT-C4 DX50B-C5 DX50BT-C6
S P P S P P
Peak Current Apk 10.50 21.00 42.00 10.50 21.00 42.00
Continuous Current @ 120ºC* Apk 2.63 5.25 10.50 2.63 5.25 10.50
Continuous Current AC @ 120ºC^ Apk 3.41 6.83 13.65 3.41 6.83 13.65
Continuous Stall Current @ 120ºC* Arms 2.10 4.20 8.40 2.10 4.20 8.40
Force Constant N/Apk 68.0 34.0 17.0 85.0 42.5 25.5
Back EMF Constant Vpk/m/s 78.2 39.1 19.6 97.8 48.9 29.3
Coil Resistance L-L @ 25ºC ohm 16.8 4.2 1.1 21.0 5.3 1.6
Coil Resistance L-L @ 120ºC* ohm 23.2 5.8 1.5 29.1 7.3 2.2
Inductance L-L @ 1kHz mH 12.44 3.11 0.78 15.55 3.89 4.67
Motor Constant @ 120ºC* N/√W 16.3 16.3 16.3 18.2 18.2 19.9
Max. Terminal Voltage Vdc 400 400 400 400 400 400
Thermal
Unit DX50B-C4 DX50BT-C4 DX50B-C5 DX50BT-C6
S P P S P P
Thermal Resistance @ 120ºC* ºC/W 0.79 0.79 0.79 0.63 0.63 0.53
Thermal Resistance AC @ 120ºC^ ºC/W 0.47 0.47 0.47 0.37 0.37 0.31
Max. Coil Temperature ºC 120 120 120 120 120 120
Mechanical
Unit DX50B-C4 DX50BT-C4 DX50B-C5 DX50BT-C6
S P P S P P
Coil Weight kg 1.07 1.07 1.05 1.25 1.25 1.58
Coil Weight AC^ kg 1.19 1.19 1.17 1.40 1.40 1.75
Coil Length mm 241 241 241 301 301 361
Attractive Force N 0 0 0 0 0 0
Electrical Cycle Length mm 60 60 60 60 60 60
Notes:
1. Apk = 1.414 * Arms; Vpk = 1.414 * Vrms.
2. * Ambient temperature 25ºC, natural convection, no heat sink.
4. Specifications tolerance – inductance +/-30%, all others +/-10%.
We reserve the right to make technical changes at any time without prior notice
PAGE 13
14. SYSTEMS MAKES A DIFFERENCE
w w w. p b a s y s t e m s. com. s g
DX B Series
Linear Motors Highest Force in Compact Size for Point-to-Point Motion Systems S P E C I F I C AT I O N S
DX 50B / 50BT
DX B SERIES
241.0(C4)
181.0(C3)
121.0(C2)
61.0(C1)
30.0 FLEXIBLE CABLE 5.6 FOR POWER
FLEXIBLE CABLE 3.3 FOR HALL
D -M4 THRU 40.0(PITCH) 6.0 M5 10.0 FOR AIR INPUT
38.2
19.1
13.9
19.1
12.0
0.0
COIL LENGTH CL CABLE OUT
(+2.0 for DX 50BT)
93.0 (+2.0 for DX 50BT)
86.0
80.0
5.0
77.4
76.2
20.1
97.5
6.0
12.7
0.0
B-M6 THRU' 60.0(PITCH) 29.75
9.0 6.35(BOTH SIDES) 38.7
19.35
19.35
0.0
TRACK LENGTH TL AIR
60.0(PITCH) 29.75 STANDARD COIL COOLED COIL
A-M6 THRU'
DX50B Standard Magnet Track
SIZE TRACK LENGTH TL (mm) WEIGHT (kg) MOUNT HOLE A (ea) MOUNT HOLE B (ea)
TL 120 119.5 1.73 2 2
TL 180 179.5 2.60 3 3
TL 240 239.5 3.46 4 4
TL 300 299.5 4.33 5 5
TL 360 359.5 5.20 6 6
TL 480* 479.5 6.92 10 10
*EX-STOCK LENGTH
TRACK WEIGHT = 0.866kg PER 60mm.
DX50B Motor Coil DX50BT Motor Coil
SIZE COIL LENGTH WEIGHT (kg) WEIGHT (kg) MOUNT SIZE COIL LENGTH WEIGHT (kg) WEIGHT (kg) MOUNT
CL (mm) Air Cool HOLE D (ea) CL (mm) Air Cool HOLE D (ea)
C1 61.0 0.25 0.28 3 C2 121.0 0.54 0.60 7
C2 121.0 0.52 0.57 7 C4 241.0 1.05 1.17 15
C3 181.0 0.76 0.85 11 C6 361.0 1.58 1.75 23
C4 241.0 1.07 1.19 15
C5 301.0 1.25 1.40 19
For COOLING OPTIONS, please ask for detail drawing.
We reserve the right to make technical changes at any time without prior notice
PAGE 14
15. SYSTEMS MAKES A DIFFERENCE
w w w. p b a s y s t e m s. com. s g
DX B Series
Linear Motors Highest Force in Compact Size for Point-to-Point Motion Systems S P E C I F I C AT I O N S
DX 65B / 65BT
• Ironless Motor
DX B SERIES
• Peak force to 4153N, Continuous force to 1038N
• Integrated with Hall Sensor
• Ideal for high precision/smooth motion
Performance
Unit DX65B-C2 DX65B-C3 DX65B-C4 DX65B-C5 DX65B-C6 DX65BT-C6
S P S P S P S P S P P
Peak Force N 554 554 831 831 1108 1108 1384 1384 1661 1661 1661
Continuous Force @ 120ºC* N 138 138 208 208 277 277 346 346 415 415 415
Continuous Force AC @ 120ºC^ N 173 173 260 260 346 346 415 415 498 498 498
Peak Power @ 120ºC W 1249 1249 1873 1873 2497 2497 3122 3122 3746 3746 3746
Continuous Power @ 120ºC* W 78 78 117 117 156 156 195 195 234 234 234
Continuous Power AC @ 120ºC^ W 122 122 183 183 244 244 281 281 337 337 337
Electrical
Unit DX65B-C2 DX65B-C3 DX65B-C4 DX65B-C5 DX65B-C6 DX65BT-C6
S P S P S P S P S P P
Peak Current Apk 12.50 25.00 12.50 25.00 12.50 25.00 12.50 25.00 12.50 25.00 50.00
Continuous Current @ 120ºC* Apk 3.13 6.25 3.13 6.25 3.13 6.25 3.13 6.25 3.13 6.25 12.50
Continuous Current AC @ 120ºC^ Apk 3.91 7.81 3.91 7.81 3.91 7.81 3.75 7.50 3.75 7.50 15.00
Continuous Stall Current @ 120ºC* Arms 2.50 5.00 2.50 5.00 2.50 5.00 2.50 5.00 2.50 5.00 10.00
Force Constant N/Apk 44.3 22.2 66.5 33.2 88.6 44.3 110.8 55.4 132.9 66.5 33.2
Back EMF Constant Vpk/m/s 50.9 25.5 76.4 38.2 101.9 50.9 127.4 63.7 152.8 76.4 38.2
Coil Resistance L-L @ 25ºC ohm 7.7 1.9 11.6 2.9 15.4 3.9 19.3 4.8 23.1 5.8 1.4
Coil Resistance L-L @ 120ºC* ohm 10.7 2.7 16.0 4.0 21.3 5.3 26.6 6.7 32.0 8.0 2.0
Inductance L-L @ 1kHz mH 9.11 2.28 13.67 3.42 18.22 4.56 22.78 5.69 27.33 6.83 1.71
Motor Constant @ 120ºC* N/√W 15.7 15.7 19.2 19.2 22.2 22.2 24.8 24.8 27.1 27.1 27.1
Max. Terminal Voltage Vdc 600 600 600 600 600 600 600 600 600 600 600
Thermal
Unit DX65B-C2 DX65B-C3 DX65B-C4 DX65B-C5 DX65B-C6 DX65BT-C6
S P S P S P S P S P P
Thermal Resistance @ 120ºC* ºC/W 1.22 1.22 0.81 0.81 0.61 0.61 0.49 0.49 0.41 0.41 0.41
Thermal Resistance AC @ 120ºC^ ºC/W 0.78 0.78 0.52 0.52 0.39 0.39 0.34 0.34 0.28 0.28 0.28
Max. Coil Temperature ºC 120 120 120 120 120 120 120 120 120 120 120
Mechanical
Unit DX65B-C2 DX65B-C3 DX65B-C4 DX65B-C5 DX65B-C6 DX65BT-C6
S P S P S P S P S P P
Coil Weight kg 1.05 1.05 1.57 1.57 2.09 2.09 2.61 2.61 3.13 3.13 3.23
Coil Weight AC^ kg 1.13 1.13 1.69 1.69 2.25 2.25 2.81 2.81 3.37 3.37 3.47
Coil Length mm 121 121 181 181 241 241 301 301 361 361 361
Attractive Force N 0 0 0 0 0 0 0 0 0 0 0
Electrical Cycle Length mm 60 60 60 60 60 60 60 60 60 60 60
Notes:
1. Apk = 1.414 * Arms; Vpk = 1.414 * Vrms.
2. * Ambient temperature 25ºC, natural convection, no heat sink.
3. ^ Air cool (AC), 6mm/4mm (OD/ID) 2m long air hose, pressure >2bar.
4. Specifications tolerance – inductance +/-30%, all others +/-10%.
We reserve the right to make technical changes at any time without prior notice
PAGE 15
16. SYSTEMS MAKES A DIFFERENCE
w w w. p b a s y s t e m s. com. s g
DX B Series
Linear Motors Highest Force in Compact Size for Point-to-Point Motion Systems S P E C I F I C AT I O N S
DX 65B / 65BT
• Ironless Motor
DX B SERIES
• Peak force to 4153N, Continuous force to 1038N
• Integrated with Hall Sensor
• Ideal for high precision/smooth motion
Performance
Unit DX65B-C8 DX65BT-C8 DX65B-C10 DX65BT-C10 DX65BT-C12 DX65BT-C15
S P P S P P P P
Peak Force N 2215 2215 2215 2769 2769 2769 3323 4153
Continuous Force @ 120ºC* N 554 554 554 692 692 692 831 1038
Continuous Force AC @ 120ºC^ N
Peak Power @ 120ºC W 4995 4995 4995 6244 6244 6244 7492 9366
Continuous Power @ 120ºC* W 312 312 312 390 390 390 468 585
Continuous Power AC @ 120ºC^ W
Electrical
Unit DX65B-C8 DX65BT-C8 DX65B-C10 DX65BT-C10 DX65BT-C12 DX65BT-C15
S P P S P P P P
Peak Current Apk 12.50 25.00 50.00 12.50 25.00 50.00 50.00 75.00
Continuous Current @ 120ºC* Apk 3.13 6.25 12.50 3.13 6.25 12.50 12.50 18.75
Continuous Current AC @ 120ºC^ Apk
Continuous Stall Current @ 120ºC* Arms 2.50 5.00 10.00 2.50 5.00 10.00 10.00 15.00
Force Constant N/Apk 177.2 88.6 44.3 221.5 110.8 55.4 66.5 55.4
Back EMF Constant Vpk/m/s 203.8 101.9 50.9 254.7 127.4 63.7 76.4 63.7
Coil Resistance L-L @ 25ºC ohm 30.8 7.7 1.9 38.5 9.6 2.4 2.9 1.6
Coil Resistance L-L @ 120ºC* ohm 42.6 10.7 2.7 53.3 13.3 3.3 4.0 2.2
Inductance L-L @ 1kHz mH 36.44 9.11 2.28 45.55 11.39 2.85 3.42 1.90
Motor Constant @ 120ºC* N/√W 31.3 31.3 31.3 35.0 35.0 35.0 38.4 42.9
Max. Terminal Voltage Vdc 600 600 600 600 600 600 600 600
Thermal
Unit DX65B-C8 DX65BT-C8 DX65B-C10 DX65BT-C10 DX65BT-C12 DX65BT-C15
S P P S P P P P
Thermal Resistance @ 120ºC* ºC/W 0.30 0.30 0.30 0.24 0.24 0.24 0.20 0.16
Thermal Resistance AC @ 120ºC^ ºC/W
Max. Coil Temperature ºC 120 120 120 120 120 120 120 120
Mechanical
Unit DX65B-C8 DX65BT-C8 DX65B-C10 DX65BT-C10 DX65BT-C12 DX65BT-C15
S P P S P P P P
Coil Weight kg 4.36 4.36 4.43 5.45 5.45 5.54 6.64 8.55
Coil Weight AC^ kg
Coil Length mm 481 481 481 601 601 601 721 901
Attractive Force N 0 0 0 0 0 0 0 0
Electrical Cycle Length mm 60 60 60 60 60 60 60 60
Notes:
1. Apk = 1.414 * Arms; Vpk = 1.414 * Vrms.
2. * Ambient temperature 25ºC, natural convection, no heat sink.
3. ^ Air cool (AC), 6mm/4mm (OD/ID) 2m long air hose, pressure >2bar.
4. Specifications tolerance – inductance +/-30%, all others +/-10%.
We reserve the right to make technical changes at any time without prior notice
PAGE 16
17. SYSTEMS MAKES A DIFFERENCE
w w w. p b a s y s t e m s. com. s g
DX B Series
Linear Motors Highest Force in Compact Size for Point-to-Point Motion Systems S P E C I F I C AT I O N S
DX 65B / 65BT
DX B SERIES
601.0(C10)
481.0(C8)
361.0(C6)
241.0(C4)
39.0
181.0(C3)
121.0(C2)
FLEXIBLE CABLE 5.6 FOR POWER
FLEXIBLE CABLE 3.3 FOR HALL
D-M5 THRU 60.0(PITCH) 51.0
M5 10.0 FOR AIR INPUT
24.5
18.5
24.5
49.0
0.0
CABLE OUT 12.0
COIL LENGTH CL
122.0 (+2.0 for DX 65BT) (+2.0 for DX 65BT)
112.0
5.0
106.9
101.4
127.0
25.6
100.0
6.5
16.0
0
B -M6 THRU 50.0
9.0 (BOTH SIDES) 60.0(PITCH) 29.75
25.0
0.0
25.0
AIR
STANDARD COIL COOLED COIL
TRACK LENGTH TL
A-M6 THRU 60.0(PITCH) 29.75
50.0
DX65B Standard Magnet Track
SIZE TRACK LENGTH TL (mm) WEIGHT (kg) MOUNT HOLE A (ea) MOUNT HOLE B (ea)
TL 180 179.5 4.50 3 3
TL 240 239.5 6.00 4 4
TL 300 299.5 7.50 5 5
TL 360 359.5 9.00 6 6
TL 600 599.5 15.00 10 10
TL 900* 899.5 22.50 15 15
*EX-STOCK LENGTH
TRACK WEIGHT = 1.5kg PER 60mm.
DX65B Motor Coil DX65BT Motor Coil
SIZE COIL LENGTH WEIGHT (kg) WEIGHT (kg) MOUNT SIZE COIL LENGTH WEIGHT (kg) WEIGHT (kg) MOUNT
CL (mm) Air Cool HOLE D (ea) CL (mm) Air Cool HOLE D (ea)
C2 121.0 1.05 1.13 4 C6 361.0 3.23 3.47 12
C3 181.0 1.57 1.69 6 C8 481.0 4.43 16
C4 241.0 2.09 2.25 8 C10 601.0 5.54 20
C5 301.0 2.61 2.81 10 C12 721.0 6.64 24
C6 361.0 3.13 3.37 12 C15 901.0 8.55 30
C8 481.0 4.36 16
C10 601.0 5.45 20
For COOLING OPTIONS, please ask for detail drawing.
We reserve the right to make technical changes at any time without prior notice
PAGE 17