1. Melanie D. Manalo
Current Position : QUALITY ASSURANCE ENGINEER
Total Experience : 13 years
Nationality : Filipino
Date of Birth : January 26, 1980
Contact Number : +639258431591
Email Address : melaniemanalo520@yahoo.com
melanie.manalo@agp.ph
Passport Number : EB7504865 (Valid until 26-Feb-18)
CAREER OBJECTIVE:
To enhance my working capacities, professional skills, business Efficiencies and to serve my organization in best
possible way with sheer determination and commitment
WORK EXPERIENCES:
Atlantic Gulf & Pacific Co. of Manila Inc. (AG&P) June 2010 to present
Quality Assurance Engineer/ Internal Quality Auditor
• Review project specifications, customer requirements and conduct gap analysis as necessary.
• Prepares project QA/QC document deliverables such as Quality Plan, Procedures, Work Instructions,
Inspection and Test Plans and support documentation.
• Interfaces and coordinates with other departments with regards to the preparation and modification
of project Procedures and Work Instructions.
• Conducts orientation with process owners for the effective implementation of the approved
Project's Quality Plan, Inspection and Test Plans, Procedures and Work Instructions.
• Prepares Corrective and Preventive Action Request for the identified/reported discrepancy,
nonconformity and other deficiencies of the project quality management system.
• Monitors Quality Performance Statistics of the Projects.
• Prepares Weekly Quality Report for the project.
• Responsible for the control and monitoring of measuring equipment.
• Reviews/verifies Material Test Certificates compliance to the Codes and Standards requirements.
• Conducts surveillance audit/patrol for a certain project and performs follow up verification.
• Participates in Internal Quality Audit and second party audits as necessary.
• Prepare Technical quality requirements for bid projects.
• Perform other tasks as directed by the QA Supervisor.

2. Project Assignments:
A. Project ; DESIGN, ENGINEERING, PROCUREMENT, FABRICATION & ASSEMBLY OF
BANGLADESH NWPGCL-L&T BHERAMARA GT CONTROL PACKAGE
Client : Mitsubishi Hitachi Power Systems, LTD.
B. Project ; ENGINEERING, PROCUREMENT, CONSTRUCTION, MAINTENANCE AND SHUTDOWN
SERVICES TO THE MALAMPAYA FACILITIES
Client : Transfield Services Worley Parsons
C. Project ; YAMAL LNG PROJECT MWP2A
Client : YAMGAZ SNC
D. Project : SUPPLY OF GAS TURBINE EXHAUST STACKS AND VENTILATION DUCTS
(FABRICATION ONLY) FOR THE MALAMPAYA PHASE 3(MP3) PROJECT
Client : FLUOR Daniel Pacific Inc. / Shell Philippines Exploration B.V.
E. Project : PDH-1 PROPANE DE-HYDROGENATION OF PAR ASSEMBLY PROJECT
Client : FLOUR Enterprises, Inc., / DOW Chemical Company
F. Project : METHANOL INJECTION SYSTEM UPGRADE PROJECT
Client : Transfield Services Worley Parsons J.V.
G. Project : AGBAUO GOLD PROJECT
Client : Lycopodium Minerals Pty Ltd
H. Project : PETRON BATAAN REFINERY PROJECT
Client : Foster Wheeler USA Corporation – Fired Heater Division
Project Scopes :
 Fabrication, Welding and Assembly Stacks and Ducts, Pre-heater Ducting and Six Radiant Modules For Two
Units Fired Heater.
Client : Chicago Bridge and Iron Company
Project Scopes:
 Fabrication and Assembly of Burner Piping Systems, Reformer Steel, Flues Gas Stack and Gas Inlet Piping
System.
I. Project : TROPICANA GOLD PROJECT
Client : Lycopodium Minerals Pty Ltd
J. Project : H2S WASHING COLUMNS FABRIACTION AND ASSEMBLY
Client : JGC Philippines, Inc.,
K. Project : FABRICATION AND ASSEMBLY OF VAPOR & LIQUID LINE SPOOL
Client : Transfield Services Worley Parsons J.V.
L. Project : DESIGN, SUPPLY, FABRICATION AND DELIVERY OF THREE (3) UNITS STORAGE
TANK PROJECT
Client : JGC Philippines, Inc.,

3. M. Project : BP Operation Canadian Crude Project
Client : Foster Wheeler USA Corporation
OTHER AG&P WORK ASSIGNMENTS:
Internal Quality Auditor for Quality Management System (QMS)
• Coordinate project compliance audits and project surveillance Audits.
• Prepares and revises Quality Management System Procedures & Work Instruction in compliance to
ISO for Quality Management System Requirements for Manufacturing Organizations for the
Petroleum and Natural Gas Industry.
• Conducts Internal Quality Audit and Second Party audits.
• Performs other tasks as directed by the Project QMR.
Quality Assurance (QA) Department coordinator of Health Safety and Environment Management System
• Responsible for coordinating all tasks associated with the OHSAS 18001 & ISO 14001 compliance.
• Identify and register the section’s Occupational Health and Safety Hazards. This includes new
process, changes in process.
• Coordinating, organizing and reporting regarding department activities Task Risk Assessment.
• Coordinate the department’s activities during internal audit program.
• Managing the department’s activities corrective and preventive action program.
• Training individuals in the department on the Occupational Health & Safety Management Systems
process.
• Assists in facilitating OHSAS external audits of the department.
Internal Quality Auditor for Health Safety and Environmental Management System (HSEMS)
• Participate in Occupational Health Safety and Environment Awareness, Hazard Identification, Risk
Assessment and Control (HIRAC) and Auditor’s Trainings.
• Participate in audit opening/closing meetings.
• Plan, prepare and conduct for an Internal Audit.
• Gather audit evidence through observation, interview and sampling of documents and records.
• Write factual audit reports and verify corrective actions on CPAR’s.
• Cooperate with Lead Auditor or team leader
• Follow-up CPAR’s from audit as per audit schedule.
Hoya Glass Disk Philippines Inc. April 2010 – May 2010
Process Engineer
• Prepare, evaluate and make revisions on Standard Operating Procedures, Work Instructions,
Machine Checklists and other related documents required inside the production.
• Perform process simulations and develop Process Flow Diagrams (PFD’s) Responsible for the
training, supervision and certification of technicians and operators.
• Prepares summary of incident reports on all troubles happened inside the production.

4. • Supervises changeover activities and ensures that all process parameters are set before start of mass
production.
• Check and review daily production report for daily process monitoring.
• Conducts and implements scheduled maintenance and other works in order to minimize and prevent
unplanned downtime.
• Initiates process improvements for productivity and quality concerns.
• Coordinates with the Production Manager, Supervisors and Engineers regarding the Monthly
Machining Report and Process Improvements.
• Concerns with the Overall Yield of the process and formulate containment plans if needed.
• Performs other task assigned by the immediate supervisor.
Shin-etsu Magnetics Philippines Corporation August 2004 - April 2010
Quality Assurance Shift Leader Engineer
• Overall Person In-charge on QA Multi-plating, Inorganic Coating, Epoxy Coating, Aqua Coating
Magnetizing Inspection.
• Issues Non-Conformity Report (NCR) for non-conforming products identified in accordance with
defined criteria.
• Monitor SPC charts, maintained and responsible to disseminate out of control points for actions to
be taken by related processes.
• Make manpower allocation/ shipment planning (work plans and priorities)
• Training / Orientation of new Inspectors / Personnel’s
• Deviation Request Applications
• Shipments / Inventory checking and monitoring
• Generation of Procedures, Work Instruction, One Point Instruction & Check sheets
• Prepares report for weekly, Monthly Quality & Production meetings.
• Reporting of Quality and Productivity Trends
• Provide Leadership in establishing systems/process to continuously enhance current level of
effectiveness & efficiency.
• Drives effective Corrective Actions/Preventive actions on customer quality issues, audits &
complaints and verify effective closure of customer corrective & preventive action request
• Conduct internal audits to ensure compliance of quality system in the SPC, Calibration, FMEA,
Control plan etc.
• Publish & drive improvement of quality indices.
Kedica Philippines Corporation January 2004-June 2004
Quality Control Inspector
• Conducts the daily quality inspection and testing of plated parts for electronic
equipment/communication equipment and semi-conductors.
• Monitors the incoming inspection of un-plated materials for Sn-Bi Plating Section.
• Responsible for the documentation and other records for the Sn-Bi Plating Section.
• Assist the other quality inspectors for Visual inspection.
• Undertakes any other duties and responsibilities assigned from time to time by the factory manager,
production supervisor and team leaders.
Lucky Cement Philippines, Inc. April 2003-October 2003
Chemical Analyst

5. • Prepares indicator solutions, reagent solutions and standard solutions.
• Standardizes and periodically checks the prepared standard solutions.
• Conducts chemical analysis of raw materials, in-process products and finished products.
• Informs the QC Section Supervisor of abnormalities that require immediate attention.
• Maintains the cleanliness and proper up-keep of all laboratory apparatus and equipment.
General Milling Corporation August 2002-February 2003
Laboratory Technician
• Monitors the quality of in process samples during operations of Crushing-Solvent extraction and
Refinery Plants through analysis in the Product Quality Plan.
• Records the results of analysis, attends to process conditions, observations and other matters that
are crucial to operation on appropriate report sheets/books.
• Conducts the analysis required for monitoring the quality of water samples during the operation of
boiler.
• Performs the analysis of finished products withdrawn from plant. Prepares and issues the
corresponding Certificate of Analysis for approval by the Quality Assurance Head, prior to the
release of the products.
• Prepares the reagents used for Laboratory.
• Monitors and Controls the quality of Soybean meal and other grain products during filling and
bagging.
Dow Chemical Philippines April 2001-June 2001
Laboratory Assistant (OJT)
• Conduct laboratory tests and quality inspection for the incoming raw materials for reprocessing.
• Conduct test samples to determine the quality of Latex and adhesives in the storage tank.
• Responsible for making and testing the quality of paints as a finish product.
EDUCATIONAL QUALIFICATIONS
Course/Degree : Bachelor of Science in Chemical Engineering
Golden Gate Colleges, Batangas City, Philippines
April 2002
SEMINARS/TRAINING
• Occupational, Health and Safety Legal and Other Requirements Training
TÜV SÜD PSB Philippines
October 22, 2014
• Environmental Legal and Other Requirements Training
TÜV SÜD PSB Philippines
October 16, 2014

6. • Transactional Failure Mode & Effects Analysis (FMEA) Training
NevilleClarke(Part of Pera Innovation Group)
September 3, 2014
• Operational Risk Assessment Training
Neville Clarke (Part of Pera Innovation Group)
May 15-16, 2014
• American Petroleum Industry (API) Specification Q1 9th Edition Awareness
AG&P San Roque, Bauan, Batangas, Philippines
May 13-14, 2014
• Environmental Management System (EMS) Internal Auditors Enhancement Training
Pera NevilleClarke
March 14, 2014
• ISO 14001:2004 EMS Internal Auditing Training
Pera NevilleClarke
January 13 & 14, 2014
• Workplace Learning & Performance Facilitation Workshop
CJI Training Center, Sarmiento Road, Danglayan,
August 6-8, 201
• Report Writing Training Skills for QA
AG&P San Roque, Bauan, Batangas, Philippines
March 13, 20 & April 11, 2013
• Fiber Reinforced Polymer Skills Training
AG&P San Roque, Bauan, Batangas, Philippines
September 05 – 12, 2011
• Internal Audit for OHSAS 18001:2007
Pera Neville Clarke
June 28 – 29, 2011
• OHSAS 18001:2007 Awareness Training Program
Pera Neville Clarke
May 17, 2011
• ISO 19011:2002 Internal Quality Audit Training
TUV SűD PSB Philippines Inc.
Pioneer Highlands Tower 1, Mandaluyong City, Philippines
November 27, 2010
• SMP P6 Magnetizing Process Set up
PT Shin-etsu Magnetics, Indonesia
June 22-July 4, 2009

7. • ISO/TS 16949:2002 Awareness and Auditing Course
International Certification Agency
March 26-28, 2008
• Root Cause Analysis
Advanced Research and Competency Institute
December 18, 2007
• 1 Coat:1 Bake Inorganic Coating Inspection & Process Set-up
Shin-etsu Chemicals Co. Ltd., SEC Asahi Plant, Japan
September 3-14, 2007
• Aqua Coating Inspection & Process Set-up
Shin-etsu Malaysia CO. LTD., SEM Plant, Malaysia
April-23-27, 2007
• Basic of Supervisory Skills Training
The Mentor Group Professional Training Consultants & Associates
February 26-27, 2007
• Statistical Process Control(SPC)
Hi-PerTrain Training & Consultancy Services
September 14 & 16, 2004
• Emergency Preparedness and Response
Shin-etsu Magnetics Philippines, LTI, Biñan, Laguna, Philippines
October 8, 2005
• Values Formation Seminar
Kedica Philippines Corporation, FPIP, Sto. Tomas, Batangas
May 19, 2004
• Basic Fire Safety and Prevention Lecture
Bureau of Fire & Protection-CALABARZON
Kedica Philippines Corporation
FPIP, Sto. Tomas, Batangas
March 16, 2004
• Visual Inspection of Single and Dual Inline Package Diodes Training
Shindengen Philippines Corporation, Carmel Ray I, Laguna, Philippines
February 9-13, 2004
• Petroleum Distillation : Theory and Application
Caltex Refinery, Bo. San Pascual, Bauan, Batangas
September 1, 2001
• Clean Technologies
Napocor, BCFTPP Complex, San Rafael, Calaca, Batangas
November 13, 1999

8. OTHER SKILLS
• More than six (6) years Internal Quality Auditor (ISO 9001, TS16949, EMS 14001 & OHSAS 180001
Management Systems)
• Knowledgeable on Microsoft Office (Word, Excel, PowerPoint, Visio, etc.)