Rayson Lascano has over 10 years of experience in chemical engineering, production supervision, and master data roles. He holds a Bachelor of Science in Chemical Engineering from UP Los Baños and is a registered Chemical Engineer in the Philippines. His career has included roles in lead smelting production supervision, finance master data analysis, pharmaceutical production and process engineering, and packaging operations technician. He is proficient in computer systems and cGMP practices.
1. Rayson Adriano LASCANO, Engr.
194 Dalipit West, Alitagtag, Batangas 4205
(63) 9985473906
ralascano@yahoo.com
EDUCATION
2003 - 2008 University of the Philippines Los Baños, Philippines
Bachelor of Science in Chemical Engineering
CAREER EXPERIENCE
August 2014 –
present
EVERGREEN ENVIRONMENTAL RESOURCES INC, Sta. Maria, Bulacan, Philippines
Junior Production Supervisor – Refining Section (Lead Smelting Plant)
• Oversee daily Refining activities to ensure smooth operations producing refined Lead of
desired quality
• Monitor processes within the Refining section to ensure machine and process optimization
May 2012 –
March 2014
SHELL BUSINESS SERVICE CENTER (SBSC-MANILA), Legaspi Village, Makati City,
Philippines
MRD Analyst – Finance Operation Data (Material, Services, Vendors and Contracts)
• Create, run and maintain master data and ensures the data integrity and conformance to
global standards and procedures using GSAP system (P94). Respond to inquiries related to the
master data and its functionality. Inform any errors to data providers and proactively follow-
up to ensure resolution is achieved.
Specific function:
Team : Services and Contracts
Duration : May 2012 – March 2014
• Focal for Contract, PIR and Service Master creation and update requests from UK and South
Africa ensuring data are entered in GSAP system (P94) with utmost compliance to GDQS.
• Focal for UA Canada and GFPT migration under Blueprint system (P16)
Other function:
Team : Manila Information and Business Continuity Management Team
Duration : March 2013 – March 2014
• Information Focal Point for Data-MSC ensuring utmost compliance of the Team with regards
to data and records management (TRIM focal)
January 2011
– May 2012
AMHERST LABORATORIES INC., Unilab Pharma Campus, East Mamplasan, Biñan,
Laguna, Philippines
Associate Process Engineer – Processing Department-Solids Plant
• Provide support to Department Team Leader to facilitate efficient operations within his area
of responsibility, maximize available resources, and ensure that departmental OGSM are
met.
• Provide direction and guidance to operators and contractual employees in his area of
responsibility and monitor closely daily work operation’s compliance to set standards and
procedures.
• Provide valuable inputs in the formulation of Departmental Objectives, Goals, Strategies
and Measures (OGSM) and Key Result Areas (KRA) of subordinates.
• Assist the Department Team Leader in monitoring compliance and adherence of
subordinates to the company’s house rules, standard operating procedures, and policies
related to cGMP and Safety standards.
• Conduct all in-process testing and inspection required as per defined frequency stated in
2. the Master Batch Record and monitor/ evaluate results of the same activity as conducted
by the operator.
• Ensure that the required inputs (materials, batch records, supplies) are available prior to
production run.
• Ensure his and his subordinates timely and accurate data entry in Batch Production
Records (BPR), Line Performance Measurement (LPM) reports and other relevant
documents and records (Finished Goods Delivery Receipt (FGDR), Logbooks, etc.).
• Monitors performance of equipment, process parameters, in-process test results and
initiate analysis and documentation of non-conformities and other issues related to quality
and productivity.
• Assist the Department Team Leader in the performance evaluation and training needs
analysis of subordinates.
• Conduct self-inspection audit of his/her area of responsibility and discuss with superior and
subordinates action plans to address non-conformance and negative findings.
• Maintain integrity and accuracy of work in process, materials and production supplies
inventory through timely and accurate computer transactions and regular conduct of cycle
count.
• Review, develop and revise standard operating procedures and other production records
with areas concerned as needed.
• Ensure compliance to calibration schedule of measuring equipments/ devices through
regular monitoring of equipment calibration status.
• Check for accuracy and correctness materials withdrawn from warehouse versus Request
for Materials Form (RFM) prior to transfer to production.
• Check for accuracy of the finished goods versus FGDR prior to transfer to warehouse.
• Ensure timeliness and accuracy of computer transactions (i.e. material issuance, receipt of
materials, entry of expiry date and location) before production run & after completion of
work order.
Other function:
Team : Internal Audit Team (member)
Duration : February 2011 – May 2012
• Perform Internal Quality Audit on different assigned departments to monitor/ensure
compliance to current Good Manufacturing Practice (cGMP).
• Act as SME during internal audit in his own department.
June 2009 –
December
2010
AMHERST LABORATORIES INC., Unilab Phama Campus, East Mamplasan, Biñan,
Laguna, Philippines
Associate Process Engineer – Technical Services Department-Solids Plant
Develop permanent solution for products with technical problem. Conduct validation of
new equipment and propose improved process/ scale-up or scale-down of the existing products.
Evaluate and facilitate technology transfer of new and improved products from R&D for routine
production. Recommend products for reformulation in R&D due to persistent technical
problem/s. Approve raw material/s recommended by RSS from alternate supplier for use in
routine production.
• Designs and writes protocol for validation of new products based on the evaluated Master
Production Records from R&D.
• Designs and writes protocol and Master Production Records (MPR) for validation of proposed
and improved existing products including improvement in process, scale-up and scale-down.
• Writes/ encodes the Master Production Records and Product Specification Sheets of
completed process validations of existing products.
• Updates the Master Production Record and Product Specification Sheet for existing products
to be able to produce commercial product of consistent quality within standard production
lead times.
• Troubleshoots problematic processes and machinery on the shop floor during production
runs.
• Answers referrals from Solids Processing, Solids Packaging & Creams and Ointment
regarding technical problems of existing products/processes.
• Oversees first production batches using trial order raw material from alternate suppliers.
Other function:
3. Project : Cycle Time Reduction Project (member)
Duration : June 2009 - December 2009
• Conducted intensive investigation on over all processes and procedures of top 10 products
manufactured by the company to identify key points on how to reduce cycle time thus
increasing productivity and process efficient
February 2009
– May 2009
SAN MIGUEL YAMAMURA PACKAGING CORPORATION-CANLUBANG PET & CAPS PLANT,
Canlubang, Laguna, Philippines
Operation Technician – PET Plant
• Operates Caps and Handle Molding Machine. Evaluates machine performance and facilitate
production optimization.
SEMINARS AND TRAININGS
Seminars and Trainings Attended Facilitator/Venue Inclusive Dates
Basic Life Support and First Aid Training Shell Business Service Center, Makati
City, Philippines
May 14-15, 2013
Q4 Ergonomics Training Shell Business Service Center, Makati
City, Philippines
November 6, 2012
SD-DMAIC in MSVC Improvement Projects Shell Business Service Center, Makati
City, Philippines
July 6, 2012
Leadership Training
Effective Supervisory Skills Workshop
Lito Lupena
The Bellevue Manila
North Bridgeway, Filinvest Corporate
City, Alabang Muntinlupa City
November 21-22,
2011
Standard First Aid and BLS-CPR training for Lay
Rescuers
The Philippine National Red Cross
Laguna Chapter
ALI-AVR
September 22-23,
2011
October 6-7, 2011
8D Problem Solving K. Guico/KB. Matalote/VA. Reyes/E.
Supangco/RJ. Toledanes
ALI AVR
March 10-11, 2011
Engineering Aspects of Tablet Coating Yap Eng Song
Colorcon
ALI AVR
January 12, 2010
Sartorius Combics 3 and Sartorius ProControl
for Windows
J. Evangelista
Department Head, Software
Engineering, Sartorius Mechatronics
Philippines, Inc.
ALI Processing
January 5, 2010
Safety Seminar Merck
ALI AVR
August 19, 2009
OUTSTANDING ACHIEVEMENT
4. • Recognized by the business in exemplifying External focus and Speed and Delivery being the focal of
different Operating Units and continuously supporting other business functions on top (CFL nominee –
Q2 2013)
• Stretch Awardee (Communication): Was recognized as one of key contributors in exemplifying good
business partnering within and outside the organization. (Q1 2013)
• Stretch Awardee (Talent and Leadership): Was recognized for exemplifying Speed and Delivery in
providing timely response and action to PIR updates for Indonesia as attested by Business Partners.
(Q3 2012)
• Recognized by Leadership Team as one of key contributor for the success of FO Away day exemplifying
excellent Teamwork as part of Logistics Committee (August 2012)
• Granted the DOST – SEI Undergraduate Scholarship, Program A (RA 7687) by the Department of
Science and Technology (June 2003 – March 2008)
• Granted High School Scholarship under ESC program of Alitagtag College (June 1999 – March 2003)
PROFESSIONAL REGISTRATION
Professional Regulation Commission – Manila, Philippines
• Chemical Engineer
Registration No. 0026559
Registration Date:11/26/2008
SOCIAL/COMMUNITY INVOLVEMENT
• UP Ugnayan ng Pahinungod (November 2004 – March 2006)
Served as Literacy Training Service 1 (LTS 1) facilitator
(2nd sem AY 2004-2005 – 2nd sem AY 2005-2006)
• Cooperated in conducting various leadership seminars for incoming LTS 2 students
• Alitagtag Concerned Citizens Organization for Reforms and Development (2002 – 2003)
SKILLS
• GSAP and Blueprint system and other computer application proficient (Microsoft Word, Powerpoint,
Excel, Visio)
• Very decent background on cGMP
• Optimistic; able to adjust to different working environment
• Possesses good communication and presentation skills
• Willing to undergo necessary training.
• Willing to travel or relocate
PERSONAL DATA
Date of Birth : July 8, 1986
Place of Birth : Dalipit West, Alitagtag, Batangas, 4205 Philippines
Age : 28
Civil Status : Single
Languages : English, Tagalog
Nationality : Filipino
Religion : Roman Catholic
TIN : 950-248-954
SSS : 04-2076629-6
Expected Salary : PhP 30,000 – 40,000
Availability : Immediate