1. RESUME
ROHIT JOSHI
E-Mail ID:
Rohit123joshi@gmail.com
Phone no:
Mob: +919179184635,
+91-8989187603
Permanent Address:
Ekta Colony Rajiv Gandhi Ward
Bina ,Distt- Sagar
(M.P) pin- 470113
Personal Data:
Father’s Name: A K JOSHI
Date of Birth : 03 Aug 1987
Gender : Male
Marital Status : Married
Nationality : Indian
Career Objective:
Highly motivated and goal oriented professional seeking an opportunity to contribute
abilities and knowledge for personal as well as professional growth. Ready to accept
the challenges and contribute in the productivity of an organization.
Career Summary
A growth-oriented and talented control and Instrumentation Engineer with a
strong background in OPERATION & Maintenances and Commissioning of
(STPP, CFBC) Power Plant AND OIL& GAS REFINERY in the field of Engineering,
Inspection, Pre Maintenances and Commissioning of field instrumentation. I have
05 years 4 month of experience in this position as well as excellent
communication and leadership skills
Work Experience
Present Assignment:
BHARAT OMAN REFINERY LIMITED,(99MW) Bina (M.P) On contract basis (O&M-OIL
& GAS DIVISION) as a Control &Instrumentation Engineer from 12 DEC 2012 to till
date.
Boiler: BHEL make 3x275 TPH, Single drum natural circulation water tube CFBC
Boiler, Working Pressure - 110 kg/cm2, Working Temperature - 510 ± 5 0 C, Heating
Surface Area - 8426.30 m2.
Turbine: BHEL make 3x33 MW Steam turbines (Extraction cum condensing type),
Working Pressure - 110 kg/cm2, Working Temperature - 510 ± 5 0 C, Speed - 5000
r.p.m.
Professional Skills:
Calibration, Installation, flushing of Foundation Field Bus type TT, FT, LT, PT
made by Using HART Communicator (Emerson 375,475) MC5 Series.
Yokogawa FCS (CENTUM CS3000 R3), SCS (PROSAFE RS) Maintenance, Logic
implementation and trouble shootout.
Max DNA METSO DCS Maintenance of Turbine Governing (EHTC) Control System.
Bentley Nevada Data Acquisition System for temperature & Vibration
troubleshooting and maintenance made by GE.
SWAS & FLUE GAS ANALYZER ,CEMS OF Thermo scientific & Forbes Marshall
Program (CFC, Ladder & FBD) and graphics design of SIEMENS 400 DCS, 300
PLC.
Maintenance and troubleshooting of all types of field instruments,
Commissioning, their calibration, testing & maintenance procedure
Maintenance and troubleshooting of SWAS, SOX, NOX AND CO &O2 ANALYZER
and Calibration.
Testing, Calibration, installation and maintenance of O2 analyzer.
Troubleshooting & maintenance of Smart Positioners (SIEMENS) and pneumatic
control valves
Maintenance Preview:
Maintenance and troubleshooting of all types of field instruments, calibration,
testing & maintenance procedure.
Maintenance of Burner Management System.(BMS)Break down fault trouble
shooting & Maintenance of (DCS) Distributed Control system (CENTUM CS3000)
supplied by YOKOGAWA INDIA LTD.
Maintenance of Air Compressors and Dryer systems
Boiler area field instruments maintenance, Ash and Coal handling instruments
maintenance jobs all types of instrumentations.
Maintenance of TDBFP, MDBFP reverses rotation system, TDBFP speed sensors,
LVDT casing expansion sensors.
Troubleshooting and maintenance of all kinds of process control instruments such
as Temperature, pressure transmitters (ABB, Rosemount, Yokogawa); flow and
level transmitters, level switches, pressure switches, speed sensors, different
types of position feedback transmitters i.e. ; actuators; Torque limit switch;
solenoid valves
Maintenance of Air Compressors and Dryer systems of IR (ABB).
Maintenance of MOV made by Auma, Rotorak
2. Previous company :
BHARAT OMAN REFINERY LIMITED, Bina (M.P) On contract basis (O&M-OIL & GAS
DIVISION) as a Analyzer Engineer from 1 Aug 2011 to 20 Nov 2012.
Work Profile
Worked as an Analyzer Maintenance Engineer in BORL BINA
Worked in Process instrumentation such as gas and liquid analyzers of different
make.
Handling maintenance of AAQMS AND CEMS ANALYSER
Handled analyzer AMC from 1st Aug 2011 TO NOV 2012
To take Analyzer Round, Routine activity and status check and Report in
approved format and procedure to ensure normal operation of Asset Function.
To perform Analyzer Preventive Maintenance and Summary Report for activities
as per scheduled time frame in approved format and procedure (SMF/SMP) to
ensure availability and reliability of Asset Support.
To perform Analyzer Calibration and prepare Calibration Summary Report for
activities as per scheduled time frame in approved format and procedure
(SCF/SCP) to ensure dependability and traceability of Asset Performance.
Shelter HVAC and window AC health check, follow up/ co-ordination for
maintenance/repair with Electrical HVAC Team and give feedback regarding its
performance through HVAC Health Status Report.
Handled and Calibration activity for Environnment-Sa Analyzers
To maintain an analyzer shelter that includes PLC, detectors (O2 deficiency, LEL,
Smoke, H2, HC, CO detectors), HVAC and communication in between analyzer to
SCADA (Central data storage unit) system
Key Responsibility in Refinery
Completes engineering design and documentation for small refinery improvement
and modification projects.
Directs the efforts of design engineering and construction contractors.- Identifies
opportunities for improved process analyzers, sample systems, and online
analytical services, pertaining to quality, cost and reliability.
Commissions and calibrates/validates different types of refinery process
analyzers & CEMS systems.
- Develops and manages reliability projects for refinery electrical distribution
system.
Provides forecast cost and schedule estimates for capital and maintenance
projects.
Reviews engineering projects to ensure compliance with refinery standards,
national electric codes and other applicable industry standards.
Provides technical support to analyzer technicians.
Assists in planning and execution of turnaround analyzer activities and provides
technical input in determining priority and scope of equipment repairs.
Maintains technical expertise in assigned functional areas of CEMS, process
analyzers and sample systems.
Responsible for discipline management of technical integrity.
Accountable for maintaining and maximizing reliability amp availability of DCS,
PLC, and Analyzers amp various other field instruments at Site.
Improve reliability through Continuous Improvement techniques/ up-gradation /
Projects / implementation of advance diagnostic and online condition monitoring
techniques.
Implement and provide inputs to standardize best practices specific to site
instrumentation equipment.
Carrying out Trouble shooting amp support for major amp critical failures / issues
occurring at site Participate in reliability amp Integrity studies as identified
Review and maintain interlocks and Shutdown systems.
Maintain Instrumentation testing laboratory
Participate in turnaround amp shutdown activities.
Identify and Implement energy conservation initiative
Participate and review RCAs, liquidation of RCA recommendations.
Support REAM functions with reliability standards amp defect elimination efforts.
Reduce production losses from defects / failures/ breakdowns.
Updating /knowledge of SAP related maintenance
Support for new procurement, FAT/SAT
Effective implementation of SMPs amp PM procedures to reduce plant failures
3. Project:
Organization : LPGCL (Bajaj Group 3X660 MW) Lalitpur U. P.
Job Title : Engineer –C&I (FTC)
Job Responsibilities: Boiler-BHEL, Turbine& Generator-
Siemens. From 18 may 2015-10 oct 2015
Knowledge of structural and functional architecture of controls system for
power plants (Open loop, closed loop, etc.).
Hands-on knowledge of Field Instruments (Smart Transmitters for various
Process parameters for remote measurements as well as Local
instruments/switches). Should be familiar with installation, calibration, testing
and commissioning.
Doing various Sequence checks and Loop checks based on the Pre
comm./Commissioning.
Good Knowledge of Calibration and testing of various process Analyzers as well
as in trouble shooting.
Installation of TSI probes and configuring /commissioning of TSI system
and Vibration Monitoring and Analysis system.
Commissioning of final control element like Motorized Operated Valves and
pneumatically operated valves etc.
Plan and execute the Plant interlock tests and should able to co-ordinate
with other concerned to carry out BTG interlock tests.
Good understanding of the latest technologies in the field of Control &
Instrumentation should be able to do the Fault analysis and implement the
corrective action accordingly.
Overall work experience should exhibit competent technical
understanding in I&C system designs, process controls, and instrument
applications.
Knowledge of PLCs and DCS from reputed OEM’s will be added advantage.
Commissioning of SADC, Mill feeder, CEMS (CODEL) O2 (AMETEK) SWAS
(THERMO ORION) Analyzer.
Commissioning of all Fans and motor (PA, FD, ID) APH and its lube oil system.
Commissioning of all Mills FEEDER (MERICK).
Commissioning of MFT DCS panel required auxiliaries and instrumentation
Professional Qualifications:
“Bachelor of Engineering in Electronics & Instrumentation” from Institute of SATI
VIDISHA (2008 to 2011) Affiliated RGPV (M.P) with 68.20%
Diploma Information &Technology (2005 to 2008) in Samrat Ashok Technical
Institute Vidisha (M.P.) Affiliated to R.G.P.V Bhopal with an aggregate of 70.60%
Educational Qualifications:
High school (MP Board) Govt.Higher. sec. school No.-1 Bina with 73.2% in
2003
Higher secondary (M.P Board) Govt.Higher. sec. school No.-1 Bina
with 73.55% in 2005
Computer Proficiency:
Proficient in programming knowledge of Ladder diagram, FBD, CFC
programming in PLCs and DCS.
Working knowledge of Microsoft Excel, Office, and Power point.
Declaration
I hereby declared that all the information given above is correct to the best of my
knowledge.
Place: Bina
Date: ROHIT JOSHI