1. 2279 Windhavenln
Rancho Cordova, CA 95670
Phone 916-367-9060
E-mail kmoyer72@gmail.com
Kristopher S. Moyer
Summary
 Current Active Secret security clearance
 IPC certified master printed circuit board designer ( IPC C.I.D.+ )
 25+ years of PCB design experience
 1000+ PCB designs
 Proficient in Verilog and VHDL FPGA development
 Proficient in supervising teams of designer to achieve budget and
schedule goals
 Proficient working with design teams across multiple sites and
multiple time zones using various online collaboration tools.
 Proficient with meeting requirements for and presenting material at
major design milestones (e.g. PDR, CDR, etc…) for IPT teams
involving the customer as well as independent reviewers and military
and government representatives
 Experienced in Domestic and Overseas business travel.
 Expert with Altium Designer and PCAD layout tools
 Experienced with OrCAD, PSPICE, Metor Graphics Expedition &
Hyperlynx
 Experienced with all Microsoft Office tools
 Experienced with MathCAD and Maple
 Experienced with Teamcenter PDM/PLM system
Education
2002 - 2014 CSUS Sacramento, CA
BS - CPE
 BS – CPE degree confirmed summer 2014
1996 – 2000 Oakland Univ Rochester, MI
BS - EE
 Pursuit of BS – EE degree
1993 - 1995 ITT Technical Institute Troy, MI
AS - EE
 Associates Degree in EE
Professional
experience
2008, 2014 – Present CSUS Sacramento, CA
Part-time faculty
 Instruct students in digital logic design
 Instruct students in microprocessor interface methodology
 Instruct students in PCB design
 Instruct students in C/C++ programming languages
 Instruct Students in Verilog and VHDL HDL language

2009 – 2013 CSUS Sacramento, CA
Teaching Assistant
 Instruct students in design of silicon digital logic microchips

2. 2008 – Present Aerojet-Rocketdyne Rancho Cordova, CA
Electrical Engineer II
Programs:
 SM3 Block IB
o PCB with:
 Greater than 1000 components
 Greater than 2000 nets
 Mixed high-speed digital and high precision analog
on same board
 12+ layers
 Extreme environments
o DFM/DFT/DFX
o Work with manufactures to ensure quality and schedule needs
are meet
o Analysis of strain-gage based pressure sensor
 SM3 Block IIA
o PCB’s with:
 Greater than 3000 components
 Greater than 5000 nets
 Greater than 250000 routed line segments
 Mixed high-speed digital, high precision analog, and
high power 3-phase motor drive on same board
 20+ layers
 Micro BGA
 Micro via and sequential lamination
 Via-in-pad / micro via-in-pad
 Buried capacitance
 Impedance controlled transmission lines
 Flex / rigid-flex
 ECAD / MCAD integration validation
 Extreme environments
o DFM/DFT/DFX
o Achieved 100% test coverage
o Work with manufactures to ensure quality and schedule needs
are meet
o Signal integrity analysis
o Design and analysis of strain-gage based pressure sensor
 MK48
o Instrumental in the successfulproposalworth greater than
$300M
 Orion
o PCB designed for manned space vehicle operation.
o Signal integrity analysis
o DFM/DFT/DFX
 Arcjet
o PCB’s designed for satellite electric propulsion / ion
propulsion system
o Signal / power integrity analysis
o Mechanical packaging analysis
o DFM/DFT/DFX
 AR1/RS25
o Development of specifications for various sensors
o Development of SCD drawings for sensors
 MISC

3. o Design cables and wire harness assemblies for satellite and
missile systems
o Develop in-house command media for the use of ECAD
systems
o Mentor junior engineers
o Prepare and conduct in-house training for ECAD systems
o Oversee / manage sub-contractors and vendors for printed
circuit boards
o Develop enterprise standard design templates for ECAD tools
o Develop and maintain enterprise wide master parts libraries
o Develop 3-D models for use with the parts libraries
o Ensure all appropriate standards are implemented in designs
 IPC
 MIL-SPEC
 NASA
 ANSI
 ASME
 CSA/UL
 Customer Specific
Sept. 2008 – Oct. 2008 Bigelow Aerospace N. Las Vegas, NV
Electrical Engineer
 Design Printed Circuit Boards for Space Vehicles
 meet ITAR compliance
2000 – 2008 MCE Inc Rancho Cordova, CA
Sr. PCB Designer
 Design Printed Circuit Boards
 Specify Materials used in the construction of PCB’s
 resin systemspecification
 glass weave construction specification
 capacitance calculation
 solder mask specification
 Interface with contract manufactures.
 Design cables and wire harness assemblies for elevator control systems
 Ensure proper mechanical packaging for cables and wire harness
assemblies for elevator control systems
 On-site vendorvisit / approval.
 Interface with component manufactures / representatives
 Interface with ICT / FCT test services
 Specify assembly processes and techniques
 Specify and approve components to be used in PCB designs
 Approve artwork for PCBs
 Design Mechanical packaging
 Design customer Artwork and graphics with the Adobe suite of tools
 Document and implement ECO’s
 Design and specify impedance controlled PCB’s
 Component creation / library management
 CAD tool specification
 Schematic Capture
 Design review
 Manufacturing / business operations interface
 Quality assurance / incoming inspection

4.  On-site vendorinterface
 Customer / vendor spec creation
 ICT / FCT Hardware Creation & Validation.
 DFA/DFM/DFT review and approval
 High-speed digital / SI design rule creation
 SI simulation with Mentor Graphics Hyperlynx tool
 PCAD, Cadence, Altium Designer tool suite usage
 Design with:
o SPI bus
o l2C
o CAN bus
o FPGA/CPLD
o PIC microcontrollers
o RS232
o ADC/DAC
1994 – 2000 Lebow Products Troy, MI
Sr. Electronics Designer
 Analog and Digital circuit design
 Software interface design and development
 PCB design including:
o Rigid board design (FR4)
o Flex board design (Kapton)
o COF / COB design
 Customer, vendor,and supplier interface to insure that high quality
parts are built to meet our needs and expectations.
 Product concept design
 Product evaluation / Vendor evaluation
 Data analysis
 Project leadership
 Artwork and overlay concept drawing design and layout with such
programs as Corel Draw
 Prototyping, testing and evaluating magneto-elastic instrumentation
and sensordesigns.
 Helping to locate new technologies that may potentially benefit the
product’s development as well as the company as a whole.
 Debug and improvement of software written in such languages as C++,
QuickBasic, Visual Basic, and some assembly language.
 Evaluation, troubleshooting,repair, and calibration of all Eaton Lebow
transducers and instruments
Professional
memberships
 Member IEEE
 Member IPC Designers Council
 Member National Vocational Technical Honor Society
References Available Upon Request