1. LEONARDO M. VILLAMIL, JR.
Civil / Structural Engineer
DETAILED RESUME
Rev-01 Page 1 of 9
SUMMARY
Registered Civil Engineer (CE) with more than Twenty-one (21) Years’ experience in the field of Civil and Structural
Engineering with solid background of designing steel structures, foundation for buildings, industrial vessels and other
infrastructure in Petrochemical / Gas Compression Plants, Refineries, Electrical Plants, Commercial and Residential
High rise Buildings, review & approval of variation orders, review of subcontractorbids and site supervision.
And has an Eight (8) years extensive experience in the field of Civil and Structural Engineering for different oil &
gas projects & Petrochemicals. Scope covers Detailed Engineering Design, Conceptual Design/Front End
Engineering Design (FEED), and construction supervision gained from multinational Engineering, Procurement,
Construction & Commissioning Companies. Engage in preparation of technical engineering documents such as
preparation of concrete and structural specifications, construction scope of works, estimate man-hour required
preparation of detailed/conceptual package, technical evaluation and technical assistance. Engineering Management
such as Quality, Schedule and Cost Control.
WORK EXPERIENCE
Current Employment
From : Dec. 24, 2013 – Present
Company : Chiyoda Almana Engineering LLC, Doha, Qatar
Position : Civil/Structural Engineer
Project/s Involved:
QAFAC 12080 - Revision of Foundation Drawings as per checking of clashes.
QAFAC - METHONOL CONVERTER PROJECT - 12080 - Verification and checking of foundation for
Eccentric
QAFAC - Elevator PRJ_QFE-13045(QFE-RFS-022)
QAFAC - Additional Firewater Tank Project
QAFAC - ESA-031 - WWTP Modification
QAFAC - QFE-ESA - EOT Crane Endurance Study
QAFAC - QFE-ESA-029 - FIRE HYDRANT EXTN & MODIFICATION
QAFAC - QFE-ESA-039 - STUDY AND DESIGN OF COALSCER
QAFAC - Steel Support to Exchanger Project (QFE-RFS-034)
QAFAC ESA-007LV 1101:Downstream Condensate T-Joint and Elbow Failure Project
QAFAC-ESA-037 - Engineering Study and Design for Additional Firewater
QP-KOD Project (12031)
QG2 Elevator DETAIL ENGG
Q-Chem. - Elevator Replacement Project (QCT2-RFS-013)
Q-Chem. - Electrical Chiller Installation - QCLT-13032
Q-Chem. - Tr3-Extruder Gearbox crane up gradation Project
Q-Chem. - QCT2-RFS-007 - Hexene Sparger Design (DD)
Q-Chem. - QCT2-RFS-017 - Safety Shower Up gradation PRJ
RLOC - RLT2-RFS-009 - Deluge System for Lube Oil Skids
RLOC - RLT2-RFS-001_Pygas Deluge System
2. LEONARDO M. VILLAMIL, JR.
Civil / Structural Engineer
DETAILED RESUME
Rev-01 Page 2 of 9
RLOC - RLT2-RFS-009 - DELUGE SYSTEM WITH FIXED WATER SPRAY
RLOC - ALKHARANA PROJECT
RLOC - RLT2-RFS-013_(New Ethane Sphere Tank Project)
RLOC - RLT2-RFS-010_MAINT.ACCESS PLATFORM FOR AIR FIN FAN COOLERS
RasGas - RFS-154 (RGCP-625) - GTG Inlet Filter House Improvement Project (Detailed Engineering)
RasGas - RFS-128 EPCm - LNG Road Tanker Loading Facility to Supply LNG to RLESC Project
RFS-129 (RGCP-552) - RGX2 LP/MP/HP Steam Reliability Improvement – Detail Engineering Design
Qatargas - QG1_Power Bridging Project (Medgulf)
Qatargas - Engineering Study for Condensate Heater, 81-F1201, NOX Minimization <Proposal for BEDP>
Qatargas - QG-LTC-LRN-1969-15 - FEED for Zekreet Phase1 (FEED & Tender SoW)
QAFAC ESA 036 - Endurance study & upgrading of existing structure of X-1105 shed to upgrade the crane
capacity to 7 tons - CTR to be prepared
QAFAC - FIRE HYDRANT EXTENSION AND MODIFICATION PROJECT (DETAILED
ENGINEERING) - Civil CTR
QG Elevators-CTR Man-hour preparation
QAFAC - ESA-032 - SNCR for NOX emission from Methanol Reformer
QAFAC - QFE-ESA-036 (QFE-14028 SP) - Endurance Study & Upgrade of Existing Structure and EOT
Crane for 7 Ton Project (DETAILED ENGINEERING) – CTR preparation
QGE-13081 - QG2 and QG3&4 Flare Reduction Project, Opp#8 - Potential QG Backup Supply Line to QP
QAFAC-ESA-040 - STUDY AND ENGINEERING FOR NATURAL GAS (NG) FILTER
QAFAC-ESA-042 - FEED Package for ZERO LIQUID DISCHARGE (ZLD)
QP-EPIC for Hamad International Airport Jet A-1 Supply Project
Qatargas - QG-15013 - HVAC upgrade at CSP
Job Description
Perform Civil Design and Analysis calculations using applicable codes and internationally accepted
practices.
Prepares scope of work.
Provides sketches for own detailed civil designs.
Review and recommend approval of contractors design and shop drawings.
Answers technical queries of contractors.
Preparation of design basis and specification.
Basic Engineering, EPC and Long Term EPCm for plant maintenance.
Analyzes existing or proposed process,utilities, storage and other support systems for the off-shore
production facilities and onshore plant.
Works with other specialist discipline engineers in the maintenance and updating of engineering drawings,
standards,specifications,manual, and data books.
Prepares CTR proposals for various projects.
Responsible for the development and execution of engineering design packages ;
Site visit / field verification based on project requirements;
Reviewing Vendor drawings, documentation, NMRs and quotations;
Coordination of engineering and design activities with other disciplines; and
Responsible for the development and execution of engineering design packages;
Involved in engineering development works for various civil projects;
3. LEONARDO M. VILLAMIL, JR.
Civil / Structural Engineer
DETAILED RESUME
Rev-01 Page 3 of 9
Design input requirement report, participating in Kick-Off Meetings of projects, information gathering and
query raising;
Preparation of design basis and load calculations, site visits and coordination with Clients, attending design
Progress Meetings;
Structural calculations in Microsoft Excel, structuralcalculations in STAAD Pro, in SAP2000.
Foundation design and checking in Risa Foundation and Foundation 3D.
Preparation of engineering mark-up drawings, drafting arrangements and supervising, design review and
checking;
Preparation of Material Take-Off Lists;
Preparation of estimates;
Vendor coordination and design checks, preparation of Contractor scopes ofwork, detailed design package
final squad checks,delivery of design package arrangements;
Design query clarifications and clearances, updating Client comments;
Design package final submission and acquiring acceptances;
Site visit / field verification based on project requirements;
Reviewing Vendor drawings, documentation, NMRs and quotations; and
Coordination of engineering and design activities with other disciplines.
Previous Employment
From : Sept. 23, 2012 - Dec. 23, 2013
Company : Chiyoda Almana Engineering LLC, Doha, Qatar
Position : Project Engineer - Civil/Structural (Secondment at Q-Chem.)
Project/s Involved:
TWR-01-0939 - Engineering Services for Turnaround Laydown Yard Project (FEED STAGE)
TWR-01-0944 - Engineering of TRANSSHIPMENT YARD ( FEED STAGE )
TWR-00-0652 - PLANT BLAST RESISTANT BUILDINGS
TWR-00-1203 - ADDITIONAL PAVED ROADWAY FOR EMERGENCY GATE ACCESS
TWR-04-1195 - PERMANENT PEDESTAL AND CONTAINMENT FOR CORROSION INHIBITOR
TANKS IN POLYETHYLENE UNIT
TWR-00-1101 - PROVISION OF SHADE COVERS FOR QCHEM ASSEMBLY POINTS
TWR-04-1129 - Provide shaded area for storing raw chrome catalyst drum storage in Activator Area.
TWR-15-1134 - CATALYST PREPARATION AND SURGE TANK DIKES
TWR-00-1149 - Enclosure of Q-Chem Materials WHS and QII Capital Spares WHS Shaded areas.
TWR-00-1184 - Fireproofing of exposed pipe supports.
TWR-00-1205 - Fire Proofing Of Steel Structures in Q-Chem.II
4. LEONARDO M. VILLAMIL, JR.
Civil / Structural Engineer
DETAILED RESUME
Rev-01 Page 4 of 9
Job Description
Lead the project through complete project cycle (from Basic Design) till commissioning and handover.
Technical and financial close out of the project.
Assisting in closing warranty issues and technical dispute with the engineering consultant and construction
contractor.
Develop work schedules,assigns and monitors designers/draftsman activities.
Preparation of operating and capital improvement program budgets.
Structural calculations in Microsoft Excel, structuralcalculations in STAAD Pro, in SAP2000.
Foundation design and checking in Risa Foundation and Foundation 3D.
Preparation of engineering mark-up drawings, drafting arrangements and supervising,design review and
checking;
Coordinates engineering work with other department, contractors and end users.
Organizes drafts and coordinates technical documents.
Perform Civil Design and Analysis calculations using applicable codes and internationally accepted
practices.
Prepares scope of work and AFD/AFE.
Provides sketches for own detailed civil designs.
Perform field activities such as observed and record existing field conditions, take and verify measurements
within projects area.
Review and recommend approval of contractors design and shop drawings.
Answers technical queries of contractors,operations and maintenance group.
Previous Employment
From : Mar 28, 2010 – Sept. 22, 2012
Company : Chiyoda Almana Engineering LLC, Doha, Qatar
Position : Civil/Structural Engineer
Project/s Involved:
RasGas Helium II Project (RHX Project – RFS-027) - Lead
Existing Pipe rack modifications, Existing Foundation Check, Design of New Pipe racks and Foundations, Design of
Equipment Foundations (Cold Box, Heater, pumps and transformer), Cable Trench Route and Duct Banks for
Electrical and Instrument, Roads and Pavements, Miscellaneous Foundations for Electrical and Instrument,
Preparation of drawings, BOQ and Requisitions, Review of Fabrication drawings and Vendor Prints, Attend Internal
& Client Meetings,Conduct Site Surveys and Construction Supports.
Qatargas Helium Project (QHE Project) - Member
Design of Equipment Foundations (Cold Box & Heater)
Offshore Crane Tip Maintenance Project (RFS-014) - Member
Design of New Platforms (Riser, Wellhead 1 to 5, 7 & 9), Preparation of drawings & BOQ. Conduct Offshore Site
Survey.
5. LEONARDO M. VILLAMIL, JR.
Civil / Structural Engineer
DETAILED RESUME
Rev-01 Page 5 of 9
Modification of Manual Valves to Remote Operated Valves RGCP-345 (RFS-030) - Member
Attend Kickoff Meeting with Client and Prepare related documents for Site Survey.
Expansion & Modification of Laboratory Building (RGCP-259 – RFS-024) - Member
Attend Pre-Bid Meeting with Sub-contractors and Prepare related documents for Site Survey.
FAU (Flow Assurance) Onsite MEG Storage Tank Replacement RGCP-329 (RFS-054) - Lead
Design of New Pipe Stanchions and Foundations, Design of Equipment Foundations (Pumps and Vessel), Cable
Trench Route and Duct Banks for Electrical and Instrument, Roads and Pavements, Miscellaneous Foundations for
Electrical and Instrument, Preparation of drawings, BOQ and Requisitions, Review of Fabrication drawings and
Vendor Prints, Attend Internal & Client Meetings, Conduct Site Surveys and Construction Supports.
AGI Diversion Interconnect Header Project (RFS-057) - Member
Existing Pipe rack modifications, Existing Foundation Check, Preparation of drawings and BOQ.
MEG Regeneration Unit OBL FEED (RFS-061) - Lead
Existing Pipe rack modifications, Existing Foundation Check, Design of New Pipe racks and Foundations, Design of
Equipment Foundations (Cold Box, Heater, pumps and transformer), Cable Trench Route and Duct Banks for
Electrical and Instrument, Roads and Pavements, Miscellaneous Foundations for Electrical and Instrument,
Preparation of drawings and BOQ, Attend Internal & Client Meetings.
Replacement of TGT Quencher and Absorber Column
(39-C 201 & 202) Project, Train 3 (RGCP-411 - RFS-056A) - Lead
Design Check for Vessel Foundation, Preparation of New Platform drawings and BOQ, Review of Fabrication
drawings and Vendor Prints and Construction Supports.
AKG Additional Power Feeder (RGCP-454 – RFS-080) - Lead
Design Check for Transformer, Cable Trench Route and Duct Banks for Electrical, Roads and Pavements,
Preparation of drawings, BOQ and Requisitions, Review of Fabrication drawings and Vendor Prints, Attend Internal
& Client Meetings,Conduct Site Surveys and Construction Supports.
FEED Enhanced Continuous Emissions Monitoring Systems (CEMS) Project (RGCP-461 – RFS-084) -
Member
Conduct Site Surveys and gathering related documents.
QatarGas-23 Combined Projects (Project #5, 20 to 23) - Member
Existing Pipe rack modifications, Existing Foundation Check, Design of New Pipe Supports, Preparation of drawings
and BOQ, Conduct Site.
6. LEONARDO M. VILLAMIL, JR.
Civil / Structural Engineer
DETAILED RESUME
Rev-01 Page 6 of 9
From : Oct. 8, 2008 – Oct. 8, 2009
Company : SYRCONSULT INTERNATIONAL BAHRAIN
Position : Structural Engineer
Project/s Involved:
45 Storeys Residential and Commercial Building
22 Storeys Residential and Commercial Building
32 Storey office Building
24 Storey Office Building
50 Storey Office Building
36 Storey Building
Job Description
Acts as company’s Structural Engineer.
Team Leader for the review committee and a consolidatorfor the review of various plans.
Review Architectural & Structural Engineering packaged from all areas.
Conduct Technical Studies & Analysis.
Carry out Civil Structural Technical consultancy.
Classified and prioritized lower cost that could prove beneficial to the company.
Prepare detailed Structural Design and revisions including standard plans using Staad Pro 2004 and
AutoCAD.
Prepare detailed Estimates,
Evaluate Billing of Contractors and Construction Documents using Microsoft Office (Power Point 2003,
Excel and Word).
Conduct Inspections and Evaluate Workmanship of Contractor.
From : Aug 16, 2006 - Aug 16, 2008
Company : DALLAH TRANS ARABIA CO. LTD. (ARAMCO Project)
Position : Structural Engineer
Project/s Involved:
5 units two residential villas (Dharan, Aramco Compound)
4 Storey office building (Dharan, Aramco Compound)
2 Storey office building (Dharan, Aramco Compound)
10 units three storey villas (Dharan, Aramco)
3 Storey office & conference bldg. (Riyadh, Aramco)
10 units 2 storey villas (Riyadh, Aramco)
4 units 2 storey office bldg. (Riyadh, Aramco)
5 units 3 storey villas (Jeddah, Aramco)
4 storey bldg. (Jeddah, Aramco)
2 storey office bldg. with basement (Jeddah, Aramco)
3 storey conference hall (Jeddah, Aramco)
7. LEONARDO M. VILLAMIL, JR.
Civil / Structural Engineer
DETAILED RESUME
Rev-01 Page 7 of 9
Job Description
Acts as company’s Structural Engineer.
Team Leader for the review committee and a consolidatorfor the review of various plans.
Review Architectural & Structural Engineering packaged from all areas (Jeddah/Riyadh/Yanbu & Rabigh).
Conduct Technical Studies & Analysis.Carry out Civil Structural Technical consultancy.
Widen frame work aspects in making conclusion to clarify the safety resources as per Saudi Aramco
Engineering standard.
Classified and prioritized lower cost that could prove beneficial to the company.
Prepare detailed Structural Design and revisions including standard plans using Staad Pro 2004 and Micro
station V8.
Prepare detailed Estimates,
Evaluate Billing of Contractors.
Construction Documents using Microsoft Office (Power Point 2003, Excel and Word).
Conduct Inspections and Evaluate Workmanship of Contractor.
From : Apr 8, 2000 - Aug 10, 2006
Company : MANUEL N. CHIEW, ARCHITECTS & ENGINEERS
Position : Structural Engineer/Office Civil Engineer/Project Inspector
Project/s Involved:
3 storey 10-door apartment (Davao City, Philippines)
72 units 2 storey Mormons church (Philippines)
7 storey commercial bldg. (Davao City, Philippines)
1 Hectare 3 storey mall (Davao city, Philippines)
12 storey steel structure commercial bldg. (Davao City, Phil.)
10 storey commercial bldg. (Davao City, Phil.)
4 units 2 storey warehouse bldg. (Davao City, Phil.)
5 storey commercial bldg. (General Santos City, Phili.)
10 units 2 storey school bldg. (Palo, Leyte, Phil.)
20 units 2 storey residential bldg. (Davao City)
12 storey hotel (Davao City, Phil.)
2 storey Polyclinic – Digos City, Phil.)
5 units 3 storey commercial bldg. (Davao City, Phil.)
5 units 6 doors apartment (Davao City, Phil.)
Job Description
Acts as company’s Structural Engineer.
Team Leader for the review committee and a consolidatorfor the review of various plans.
Review Architectural & Structural Engineering packaged from all areas.
Conduct Technical Studies & Analysis.
Carry out Civil Structural Technical consultancy.
Classified and prioritized lower cost that could prove beneficial to the company.
Prepare detailed Structural Design and revisions including standard plans using Staad Pro 2004 and
AutoCAD.
Prepare detailed Estimates,
8. LEONARDO M. VILLAMIL, JR.
Civil / Structural Engineer
DETAILED RESUME
Rev-01 Page 8 of 9
Evaluate Billing of Contractors and Construction Documents using Microsoft Office (Power Point 2003,
Excel and Word).
Conduct Inspections and Evaluate Workmanship of Contractor.
From : Mar 16, 1998 - Apr 5, 2000
Company : MONOLITHIC CONSTRUCTION & DEVELOPMENT CORP.
Position : Office Civil Engineer/Project Material Engineer
Project/s Involved:
10 Km – 2 lane highway roads (Mindanao, Phil)
10 units pedestrian overpass (Davao City, Phil)
30 Lm bridge extensions (Mindanao, Phil.)
5 km – 4 lane road (Mindanao, Phil.)
4 units – 3 storey office bldg. (Mindanao, Phil.)
10 units – 2 storey school bldg. (Mindanao, Phil.)
Job Description
Prepare detailed Estimates.
Construction Documents using Prima Vera and Microsoft Office (Power Point 2003, Excel and Word).
Attend Pre-Bidding and Bidding Conferences.
Supervised/Monitormaterial control of the Project.
Prepare detailed architectural and structural plans and revisions including standard plans using AutoCAD
Release 2004, 2002, 2000, 14 & 12.
From : Jan 9, 1995 - Mar 2, 1998
Company : COUNTRYWIDE SHELTERS, INCORPORATED
Position : Office Civil Engineer/Project Material Engineer
Project/s Involved:
50 units – low cost housing (Davao City, Phil.)
7 storey hotel (Mindanao, Phil.)
2 units – 2 storey residential bldg. (Davao City, Phil)
4 storey commercial bldg. (Davao City, Phil.)
Job Description
Prepare detailed Estimates.
Construction Documents using Prima Vera and Microsoft Office (Power Point 2003, Excel and Word).
Attend Pre-Bidding and Bidding Conferences.
Supervised/Monitoring of the Project.
Prepare detailed architectural and structural plans and revisions including standard plans using AutoCAD
Release 2004, 2002, 2000, 14 & 12.
9. LEONARDO M. VILLAMIL, JR.
Civil / Structural Engineer
DETAILED RESUME
Rev-01 Page 9 of 9
EDUCATION / QUALIFICATION
Lifetime Member for Philippines Institute of Civil Engineers
Registered in the Committee of Engineering Professional Practice in Kingdom of Bahrain as Category A
TRAINING
Apr 26, 1999- Apr 30, 1999 - Seminar/Workshop on Material Quality Control in Field Testing for
Contractors
Jun 10, 2012- Jun 14, 2012 - Seminar/Workshop on Bentley Institute for Structural Analysis Computer
System (SACS) Software.
Jul 08, 2012- Jul 12, 2012 - Seminar/Workshop on Bentley Institute for Advance Structural Analysis
Computer System (SACS) Software.
SOFTWARE EFFICIENCY
SAP2000
ETABS
STAAD Pro V8i
SACS
Risa Foundation
Foundation 3D
Auto CAD
Micro station
MathCAD
Micro soft Office
OTHER INFORMATION
Languages Known : English, Tagalog and basic Arabic.