1. Kim Reynolds
172 Hayes Road, Binghamton, NY 13905. Cell Phone (607) 760-0894
Email - reynolds.kim@hotmail.com
_______________________________________________________________________________________________
Many years of manufacturing and management skills in the areas of:
• Program Management from design to manufacturing.
• Quality Management systems including ISO9000, 9001, TS16949, AS9100, and ISO13485.
• Implement and manage manufacturing of US and off shore facilities in EU, Asia and Mexico.
• Manager of supplier quality.
PROFESSIONAL EXPERIENCE
Raymond Corporation Greene, NY
High End Tractor and Fork Lift Manufacturer February 2016 to Current (Contracting)
Manufacturing Engineering Specialist
Responsibilities/Accomplishments:
• Implement and assist process flow for two new automated paint systems
• Process improvement reviews for various departments throughout the facility
• Update floor layouts using AutoCAD
• SOW updates for the manufacturing equipment
• Responsible for process flow for new 160 thousand square foot facility under going construction
changes
Endicott Coil Inc. Binghamton, NY
High volume Electronic Component Manufacturer January 2015 to July 2015 (Reduction in workforce)
Quality Engineer
Responsibilities/Accomplishments:
• Implement and assist for ISO 9001 certification
• Develop and monitor defect collection system.
• Implement IPC solder training.
• Document and monitor MRB activity.
• 5s plans manufacturing floor.
BAE Systems Endicott, NY
Low Volume Military Contract Manufacturer September 2014 to January 2015 (Temporary Assignment)
Manufacturing Engineer
Responsibilities/Accomplishments:
• Incorporate NPI into build plans for the manufacturing floor.
• Update assembly plans to Engineering changes.
• Monitor process activity for accuracy and Quality control per company procedures.
• Active with company Six Sigma goals.
AsteelFlash Manufacturing Services Owego, NY
Medium volume Contract Manufacturer April 2012 to June 27, 2014 (Plant Closed)
Quality Engineer
Responsibilities/Accomplishments:
• Monitor quality activity data at receiving inspection, MRB, final inspection, manufacturing and test.
• Responsible for vendor, supplier site audits and data for vendor rating.
• Managed internal and external corrective actions.
• Assisted in company Quality Systems certification ISO9001, AS9100 and quality audit training.
• Manage MRB system database. Reduced MRB cost from $110,000 to $0.0 in six months.
2. • 5s support to reduce manufacturing from 150k square feet to 35k square feet in the same facility
improving production throughput and profit.
Catalyst Manufacturing Services Endicott, NY
Medium volume Contract Manufacturer January 2008 to April 2012 (Purchased by Asteelflash)
Manufacturing Engineer
Responsibilities/Accomplishments:
• Surface Mount Process Engineer. Reduced defects by changing stencil design.
• New product introduction providing all processes for the manufacturing of printed circuit board
assemblies at SMT, wave solder, PTH, hand solder processes and box build assemblies.
• Develop paperless processes using Aegis Circuit Cam Software.
• Develop processes for 5s lean manufacturing.
• State University of NY X-Ray Technician for Catalyst.
• Develop processes for re-balling BGAs, LGAs and other components.
Raymarine Incorporated Fort Lauderdale, FL July 2003 to December2007 (Closed R&D office)
Design and Manufacturer of high end Marine Navigation Equipment
Manufacturing Engineer
Responsibilities/Accomplishments:
• Manage bill of material and manufacturing costs throughout legacy projects including conversion to
RoHS compliance.
• Manage NPI (New Product Introduction) from design team to manufacturing.
• Audit and select qualified Contract Manufacturers worldwide to manufacture product.
• Source and set-up manufacturing at contract manufacturers in Asia including China, Hong Kong
and Taiwan that reduced manufacturing costs.
• Quoting new/existing products for material and manufacturing cost reduction with manufacturers in
the global market.
JTECH Communications Boca Raton, FL October 1998 to July 2003 (Hired by Raymarine)
Leading manufacturer of on premises paging systems.
Quality Engineer
Responsibilities/Accomplishments:
• All supplier quality control/feed back and control of all internal and supplier corrective action system
• Source and set-up manufacturing at contract manufacturers in Asia including China, Hong Kong
and Taiwan that reduced manufacturing costs.
• Database development for defect collection using MS Access
• Support for ISO9000 implementation.
• All supplier quality control/feed back and control of all internal and supplier corrective action system
• FMEA methods and HALT testing.
EDUCATION
Broome Community College Binghamton, NY
• Electrical Engineering courses
• Six Sigma Green Belt
• Kaizen Methods for Manufacturing
• 5S Application
SPECIALIZED TRAINING
China Lake Naval Weapons Center China Lake, CA
• Military Solder Technology, Category H, DOD STD 2000
• Certified IPC Specialist
• FCC License KC2YHR
EMS Fire Rescue Broome County N.Y.
• 25 years in EMS Fire Rescue