Uwandu Kenneth is a service supervisor with over 4 years of experience in well cementing and miscellaneous pumping operations. He has worked on numerous rigs for companies like SPDC, NAOC, and Chevron, cementing over 30 wells and demonstrating skills in cementing calculations, pressure testing, and equipment operation and maintenance. The document provides details of his career highlights, qualifications, skills, and references.

1. UWANDU KENNETH .C
#3 cpm street off stadium road,
Elekahia Port Harcourt mrkendallas@yahoo.com +2347062572404, +2347051687859
SERVICE SUPERVISOR, WELL CEMENTING/MISCELLANEOUS PUMPING
˜A practical thinker who pioneers the execution of well cementing/miscellaneous pumping with
commendable skills and high level of professionalism, following the lay down safe work procedure
for it to meet and exceed customer’s expectations.˜
Target oriented cementer, rendering quality services in well cementing, pressure
control and miscellaneous pumping.
Has excellent knowledge in the use and operation of different model of cementing
pump units, Batch mixers, Bulk plants and their maintenance.
Conversant with Cementing Calculations, Fly-mixing and Batch mixing.
Has basic knowledge in Brine filtration, Pipeline services and Well-head maintenance.
NOTABLE CAREER HIGHLIGHTS
Has performed and witnessed more than thirty (30) cementing jobs, Primary and
secondary cementing inclusive.
• In 2012, cemented Shell Petroleum Development Company (SPDC) well, Gbaran
21 & 14ST, KCA-Deutag T-209 rig in surface casing, intermediate and liner casing
cementation also carried out the pumping/pressure testing operations during
completions. Worked as an equipment operator.
Was also hired by Baker Hughes cementing crew to operate an auto-cement mixer
during a 9, 5/8” casing cement at OANDO location HPEB 126 rig in Ibeno akwa
ibom state.
Carriedoutbalanceplugcementing,linercementingjobandpumpingservicesatSPDClocation,Oyibo54,KCA-DeutagT-43rig. Worked as an equipment
operator.
• In 2013, cemented SPDC well, Zarama 15, KCA-Deutag T-209 rig in surface
casing and intermediate casing cementation also carried out the pumping/pressure
testing operations during completions. Worked as an equipment operator.
Carried out all primary cementing jobs at Nigeria Agip Oil Company (NAOC)
location, HPEB 120 rig at Ashaka.
Worked as an equipment operator.
Cemented SPDC well, Agbada 68ST, KCA-Deutag T-209 rig on balance plug
cementing job, Intermediate and liner casing cementation also carried out the
pumping/pressure testing operations during completions. Worked as an Auxiliary
cementer.

2. Cemented SPDC well, Etelebou 7, KCA-Deutag T-43 rig on plug cementing and
carried out the pumping/pressure testing operations during completions. Worked as
an Auxiliary cementer.
Cemented SPDC well, ImRiv 14, KCA-Deutag T-43 rig on plug cementing and
liner casing cementation also carried out the pumping/pressure testing operations
during completions. Worked as an Auxiliary cementer.
Cemented SPDC well, Adibawa NE 02, KCA-Deutag T-43 rig. Performed well
acidizing and carried out squeeze cementation on 2 different formation sand also
carried out the pumping/pressure testing operations during completions. Worked as
a Lead cementer/crew leader.
• In 2014, Cemented NAOC well, samabri 12ST, 6ST, 5ST & 3ST. HPEB 119 rig on
Intermediate casing, liner and plug cementing jobs also carried out the
pumping/pressure testing operations during completions. Worked as an Auxiliary
cementer.
Cemented SPDC well, okpokunuo 6x, Hilong 19 rig, Carried out plug cementing
on 5 stages of the well bore also carried out the pumping/pressure testing
operations during completions. Worked as an Auxiliary cementer.
Cemented SPDC well, kolo creek 27, Hilong 19 rig in surface casing and
intermediate casing cementation also carried out the pumping/pressure testing
operations during completions. Worked as an Auxiliary cementer.
• In 2015, carried out pumping/pressure testing services on SPDC well, kolo creek 43, 45
& 46, Hilong 19 rig during completions. Worked as a service supervisor.
Commenced water re-injection operation on NAOC wells, Ebocha well 20, 19, 18
&17, also worked at IDU flow station, which its objective is to separate oil from
the waste water, filter the water and re-inject into the formation to eliminate the
excessive cost of treating the waste water, thereby wetting the formation and
increasing the flow pressure of the nearby wells. Worked as a service supervisor.
Carried out pumping/pressure testing services on SPDC well, koroama 8, Hilong 19
rig during completions. Worked as a service supervisor.
Cemented SPDC well, EPU TSGV 001, Hilong 19 rig in surface casing and
intermediate casing cementation also carrying out the pumping/pressure testing
operations for completions. Worked as an Auxiliary cementer.

3. Cemented SPDC well, EPU TSGV 003, Hilong 19 rig in surface casing and
intermediate casing cementation also carrying out the pumping/pressure testing
operations for completions. Worked as an Auxiliary cementer.
Cemented Chevron well, Gbokoda - CA, Oando Energy Respect rig in surface
casing and intermediate casing cementation also carrying out the pumping/pressure
testing operations for completions. Worked as an Auxiliary cementer.
WORK EXPERIENCES:
• Service supervisor at sowsco well services (nig) ltd.
• Assistant to the automobile engineer at Hi-man engineering Technology
(During my four months Industrial Training)
• Assistant to the Service Engineer at Etimbest heavy duties
• Pool Clerk with INEC during 2011 electoral section
• Sales Assistant at Uche-Emeka Electronics Owerri.
• Secretary of the Community Based Organization (CBO)
(A Program Founded & sponsored by USAID & SFH)
EDUCATION, AFFILIATIONS & CONTINUING DEVELOPMENT COURSEWORK
• TBOSIET at TOLMANN allies services
• Federal Polytechnic Nekede, Owerri.
Higher National Diploma (HND) in MECHANICAL ENGINEERING
• Drillnet 2.0 version training
• Basic/Refresher filtration specialist course
• Basic Engineering calculations
• Jet training
RIGS WORKED ON:
KCA DEUTAG T-209(SPDC)
KCA DEUTAG T-43 (SPDC)
HPEB 187 (OANDO)
HPEB 120 (NAOC)
HPEB 129 (SPDC)
HILONG 2 (SPDC)
HILONG 19(SPDC)
HPEB 119 (NAOC)
AGIP OIL CENTRE (NAOC)
IDU FLOW STATION (NAOC)
OES RESPECT (CHEVRON NIG)

4. COMPETENCE AND SKILLS:
• well cementing with 4years of field experience
• Cementing calculations.
• Miscellaneous pumping
• Pressure testing
• Operation of pumping/cementing equipments
• General maintenance/servicing knowledge of triplex pumps, centrifugal pumps,
butterfly valves, plug valves, check valves.
• Bulking operation.
• Use of DrillNet 2.0 version
• Knowledge in; Computer Usage and software engineering, good at drawing
works & computer graphics.
PRESENT WORK PLACE:
Sowsco well services (nig) ltd
Position: Service supervisor (cementing/pumping department)
HOBBIES:
Swimming, Travelling and Browsing the Internet
REFEREES:
MR ROTIMI ADENIRON
General Manager
Sowsco well services (nig) ltd
Tel: 08064698838
ENGR. PAUL NKEMAKOLAM
07068108257
HON. RAYMOND UKEOMA
Director Ravic Investments
Tel: 08038756713