1. RBM-1-4
WEATHERFORD
R E S U M E
JETTLE FRANCIS
Email: jettlefrancis@yahoo.com
Lot. 1116, RPR 2, Lorong Kapur, Jalan Batu Biah, 98700 Limbang Sarawak.
Cell Phone: +6016 846 2983
OBJECTIVE
Intend to better my career by working in a challenging position in a major oil and gas company
seeking solid experiences in technical, operation and project management, which will help me to
apply my skills and realize my full potential and this position should have many opportunities for
an aggressive dedicated individual with the leadership needed to advance.
NATIONALITY
Malaysia
NRIC No. 650820-13-5803
QUALIFICATION
Completed Lower Certificate Education, (SMK Limbang)
Completed Malaysia Certificate Education, (SMK Limbang)
Business management (ITM Kuching)
2. R E S U M E
JETTLE FRANCIS
WEATHERFORDRBM-2-4
WORK EXPERIENCE
Nov 9. 2015 to April 8: Petronas Brunei (PCBL)
Position : Supply Base Supervisor
Responsibilities :
1. Strategize and manage warehouse and base operations in the most effective, safe
and cost efficient manner to meet business requirements while ensuring compliance with
company established policies, procedures and regulatory requirements, practice of good
governance and integrity in the overall processes and practices to support uninterrupted
exploration, drilling and development and production operations
2. Monitor and check the condition of Oil Country Tubular Goods (OCTG) materials
and identify for integrity test, refurbishment or retreating prior send the materials to
offshore location.
3. Facilitate, direct and ensure integrity in the provisional of utilities support (e.g. Fuel
oil and water) to marine vessels and rigs.
4. Prepare loading advise and cargo manifest on logistic activity.
5. Present and witness the Integrity test for the OCTG materials at vendor work site
and prepare necessary documentation for the next movement of the items.
6. Arrange and coordinate the transportation of tubular to be sent to worksite,
workshop and other specific location.
7. Update daily inventory and submit report to Logistic Executive based on weekly
basis
8. Prepare list of items i.e. Scrap materials, surplus, unmoved and obsolete items and
recommend for disposal.
9. Store and stack OCTG items properly and safely as per API standard for easy
retrieval and monitor.
10. Inspect and ensure cleanliness of open yard and warehouse area, condition of
tubular and ensure proper storage of all materials.
11. Plan and coordinate the utilization of Mechanical Handling Equipment (MHE) for all
loading and offloading activities to achieve cost optimization.
12. Arrange and coordinate drilling stock take exercise on annual or as and when
required to avoid any discrepancies between actual vs. system.
13. Respond to standby duty, call out for urgent operations need after office hours.
14. Physically check, count verify and tagged all equipment /materials delivered as per
specification required in contract, purchase order and indent for the right quantities,
quality and specification.
3. R E S U M E
JETTLE FRANCIS
WEATHERFORDRBM-3-4
15. Discharge all materials and equipment from all onshore/ offshore location and
providing proper identification and tagging for easy access in future, ascertained the
location of various materials received for yard, stock, temporary storage scrap repair,
disposal or return back to contractor.
16. Liase with custom unit on exempted and non-exempted item received. Thus
avoiding unnecessary paying of duties.
17. Prepare and arrange a proper filing system on all activities for fast and easy retrieval.
18. Perform other task as instructed by “COMPANY” Logistic Executive from time to
time.
19. Administer the packing, crating, palletizing and containerizing of all items due for
dispatch, following warehouse procedures to ensure that all items are properly marked /
packed.
20. To liaise with related Government bodies. Liaison with Government bodies such as
environmental control, customs and immigration of incoming materials
21. Ensure all equipment and materials transported offshore comply with company HSE
Management System requirements.
22. Ensure the stacking of material are following the accepted warehouse procedure and
safety standards and to ensure that all items are properly marked and tagged.
23. Supervise the issuance of material from the inventory and the repair item from the
temporary storage
24. Managing storage area so that the warehouse space is optimized.
25. Work towards creating and sustaining culture that support the HSE management.
26. Supervise all materials and equipment received from vendor or offshore for stock or
temporary storage at proper location in accordance to established procedure and safe
practices.
27. Ensure all items are accompanied with relevant documents i.e. Delivery order, MRV
before entering storage location.
28. Prepare, monitor, analyze and submit KPI report based on weekly basis.
29. Supervise and monitor the movement item stored in the warehouse and sent to
vendors for repair, refurbish or inspection.
30. Train, motivate and counsel staff to ensure competency.
31. Ensure proper precautionary measures are adhere to for keeping of hazardous
materials such as chemical petroleum products and other inflammable materials.
4. R E S U M E
JETTLE FRANCIS
WEATHERFORDRBM-4-4
WORK EXPERIENCE
Jan. 2015 to Sep 2015t: ENVENTURE GLOBAL TECHNOLOGY /
DIALOG SYSTEMS SDN BHD
Position : Project Manager
Responsibilities :
Crew Management.
Overseeing work production.
Communicating with other shift leader, the Resource
coordinator, the shop manager, and operation manager, and
being the HSSE supervisor for the crew.
Assembling tools for the field (float assemblies, expansion
assemblies, debris catchers, etc) – includes assembling
materials ( with quality personnel observing to provide quality
control ( QC) / checks and balance ), operating building the
tools, sending them out, and making them “ Rig ready”
Prioritizing ongoing jobs – includes updating the job board and
making sure that the loadout are correct.
Maintenance – includes maintenance at tools, shop equipment,
etc.
Performs various clean-up and housekeeping activities.
Observes and follows all safety rules and procedures,
including wearing required personal safety equipment.
Performs other duties and activities as directed.
OFFSHORE
Supervise / Coordinate offshore Installation of Solid
Expandable Tubular (SET).
Prepare installation reports for Pre and Post-Job report.
Dressing Launcher Assembly for offshore Installation of Solid
Expandable Tubular (SET).
Maintenance and Inspection of Launcher Assembly Tools and
component parts.
Communicating with the Drilling Supervisor before running /
Installation of Solid Expandable.
Prepare tally casing and drill pipe before running the SET.
5. R E S U M E
JETTLE FRANCIS
WEATHERFORDRBM-5-4
WORK EXPERIENCE
April 1st, 2013 TO 27th July 2014: Weatherford Malaysia
Position : JAM (Joint Analyst Makeup) Supervisor
Duties & Responsibilities:
Adheres to safety procedures and policies in accordance with
the
Safety Management System, including:
active participation in workshop safety & tool box meeting,
active participation and contribution to field JSA/JHA and
other rig specific safety initiatives,
report all hazards and unsafe acts,
ensure third party compliance,
Actively participating in all Weatherford specific programs.
Adheres to quality procedures and policies in accordance with the
ISO9002 Quality Assurance System, including:
ensure equipment is fit for purpose,
comply with Work Instructions,
raise Corrective Action for all non conformances,
Identify areas requiring improvement and/ or audit.
Performs workshop duties, including:
Coordinate and supervise workshop personnel in repair
and maintenance of equipment in a cost effective manner
and in accordance with company procedures,
Coordinate and supervise workshop personnel in maintain
good standard of housekeeping practices in workshop and
yard.
Participate in Weatherford Competency Program by tracking
and cooperating in personnel training.
Ensure effective implementation Health, Safety, Security and
Environmental systems and procedures in his/her workplace.
Ensures effective implementation and maintenance of Quality
Management System in his/her workplace.
Other duties as directed.
6. R E S U M E
JETTLE FRANCIS
WEATHERFORDRBM-6-4
WORK EXPERIENCE
January 16, 2010 TO April 15, 2013: Weatherford Malaysia
Position : Crew Chief (Offshore)
Jam (Joint Analyst Makeup) Technician
Onshore
Prepare and Test Jam Unit prior to be load out to offshore.
Prepare technical documents such as load out list and maintenances report.
Services and Repair Jam Unit backload from offshore.
Maintain all logs of parts list for all jam equipments
Calibration on the Load Cell
Programming Software for all kind of Jam Unit
Print out and store make up graph for the well that are using Jam System
Offshore
Prepare, install and operate Jam Unit
Intemperate graft for every makeup joints
Analyze all tubing and casing threads compound before makeup
Optimize the right torque figure for different type of joints
Make sure doing log on the Jam for all jobs.
7. R E S U M E
JETTLE FRANCIS
WEATHERFORDRBM-7-4
WORK EXPERIENCE
January 2008 TO January 2010: Weatherford Solutions Sdn Bhd
Position : Senior Field Supervisor
Job Scope :
Performs field installation and operation of equipment at rig
site to the customer’s requirements.
Duties & Responsibilities:
Adheres to safety procedures and policies in accordance with
the
Safety Management System, including:
active participation in workshop safety & tool box meeting,
active participation and contribution to field JSA/JHA and
other rig specific safety initiatives,
report all hazards and unsafe acts,
ensure third party compliance,
actively participating in all Weatherford specific program.
Adheres to quality procedures and policies in accordance with the
ISO9002 Quality Assurance System, including:
ensure equipment is fit for purpose,
comply with Work Instructions,
raise Corrective Action for all non conformances,
identify areas requiring improvement and/ or audit.
Performs workshop duties, including:
Coordinate and supervise workshop personnel in repair
and maintenance of equipment in a cost effective manner
and in accordance with company procedures,
Coordinate and supervise workshop personnel in maintain
good standard of housekeeping practices in workshop and
yard.
Performs field assignment in for the following product line (in
priority order):
Solid Expandable SYSTEMS (TOP PRIORITY)
Homco Internal Casing Patch Systems
Weatherford Annular Casing Packer (ACP) Systems
Cementing Products Equipments: Weatherford Cementing
Head, Subseas Release Plug Systems, Weatherford Stage
Tool and MudMaster Systems.
Any other Business Unit’s assignment as needed.
Performs field duties, including:
Provide workshop and office assistance with pre-job
planning and preparation,
Participate in pre-job briefing prior to travelling to the rig
site,
8. R E S U M E
JETTLE FRANCIS
WEATHERFORDRBM-8-4
Pre-job equipment checks for operation and ensure fit for
purpose,
Safely rig-up and operate equipment in accordance with
Company and Customer instructions,
Liaise with company representative, toolpusher, drill crew
and drilling engineer on the running and handling of
equipment,
Report to base on any problem or malfunction and provide
a comprehensive service report,
Safely rig down and prepare equipment for back load,
Complete appropriate paper work as required,
Review job with District Product & Service Line Manager
or his delegate when job is completed,
Upload job report into Weatherford Performance Tracking
Systems (WPTS)
Assist with any post-job follow up and with Customer
enquiries as required.
Assist with employee training, onshore and offshore
Participate in Weatherford Competency Program by tracking
and cooperating in personnel training.
Ensure effective implementation Health, Safety, Security and
Environmental systems and procedures in his/her workplace.
Ensures effective implementation and maintenance of Quality
Management System in his/her workplace.
Other duties as directed.
WORK EXPERIENCE
2007 to 2008 : MI SWACO (SPS International)
Position : ST Field Engineer
Responsibilities
Service the Wellbore Clean up tool and
Run the clean up tools
9. R E S U M E
JETTLE FRANCIS
WEATHERFORDRBM-9-4
WORK EXPERIENCE
Jan. 2004 to 2007: ENVENTURE GLOBAL TECHNOLOGY / DIALOG
SYSTEMS SDN BHD
Position : Project Manager
Responsibilities :
Crew Management.
Overseeing work production.
Communicating with other shift leader, the Resource
coordinator, the shop manager, and operation manager, and
being the HSSE supervisor for the crew.
Assembling tools for the field (float assemblies, expansion
assemblies, debris catchers, etc) – includes assembling
materials ( with quality personnel observing to provide quality
control ( QC) / checks and balance ), operating building the
tools, sending them out, and making them “ Rig ready”
Prioritizing ongoing jobs – includes updating the job board and
making sure that the loadout are correct.
Maintenance – includes maintenance at tools, shop equipment,
etc.
Performs various clean-up and housekeeping activities.
Observes and follows all safety rules and procedures,
including wearing required personal safety equipment.
Performs other duties and activities as directed.
OFFSHORE
Supervise / Coordinate offshore Installation of Solid
Expandable Tubular (SET).
Prepare installation reports for Pre and Post-Job report.
Dressing Launcher Assembly for offshore Installation of Solid
Expandable Tubular (SET).
Maintenance and Inspection of Launcher Assembly Tools and
component parts.
Communicating with the Drilling Supervisor before running /
Installation of Solid Expandable.
Prepare tally casing and drill pipe before running the SET.
10. R E S U M E
JETTLE FRANCIS
WEATHERFORDRBM-10-4
WORK EXPERIENCE
2001 to 2003 : WEATHERFORD (M) BHD
Position : Combination Technician / Jam Tech
Responsibilities :
Perform casing and completion job during off-shore.
Check, confirm tools and equipment once at off-shore rig.
Feedback and troubleshoots tools and equipment if found
failure or unsafe to Supervisor.
Independently set up and safely operate casing tong, power
unit, casing and tubing handling equipment as required during
operations.
Set up and assist JAM (Joint-Analyze-Make up) operator in
running Jam system.
Report to operation while onshore and after any scheduled
days off to assist in the workshop duties as required by the
operation Supervisor
Assist in routine maintenance procedures on micro-grip
handling equipment.
Independently maintenance and set up mechanized system
during onshore and off-shore.
Complete all documentation regarding job and equipment
performance.
Any other duties as may be assigned from time to time.
Performed preventive and corrective maintenance on
production machines, evaluate machine performance trends.
Repair breakdown machine / Casing / tubing tong.
Investigated new machine installed in the workshop to make
sure that it would comply with quality assurance procedures
and safety.
Set up and safely operate JAM system as well understand
Torque turn and Torque time theory. Capable to use and
understand Tubular Data handbook to determine proper
optimum Torque, make up loss, coupling ID & OD, drift size and
etc for a given threaded connection ( premium and non
premium connection)
Capable to set up/ understand and safely operate casing/
tubing tongs, power unit and casing/ tubing handling
equipment if required during operation.
Responsible operate bucking unit during pre-assembly in
onshore operations, if service is provided (These include
pressure testing on sub-assembly).
Maintenance:
11. R E S U M E
JETTLE FRANCIS
WEATHERFORDRBM-11-4
Assist in maintenance on hydraulic, power equipment,
handling tools and hydrostatic if service is required by the
supervisor in town.
Independently perform routine cleaning and packing of JAM
equipment. This include for JAM checklist, PMR, calibration
check & troubleshooting.
Independently perform routine calibration and trouble shooting
maintenance procedure on JAM system.
WORK EXPERIENCE
1998 to 2000 : KEJURUTERAAN SAMUDRA TIMUR
Position : Combination Technician
Responsibilities (Cont’d)
Set up and safely operate TMS system as well understand
Torque turn and Torque time theory. Capable to use and
understand Tubular Data handbook, determine proper optimum
Torque, make up loss, coupling ID & OD, drift size and etc for a
given threaded connection (premium and non premium
connection).
Capable to set-up/ understand and safely operate casing/
tubing tongs, power unit and casing/ tubing handling
equipment if required during operation.
Responsible operates bucking unit during pre-assembly in
onshore operations, if service is provided (These include
pressure testing on sub-assembly)
Maintenance:
Assist in maintenance on hydraulic, power equipment,
handling tools and hydrostatic if service is required by the
supervisor in town
Independently perform routine by cleaning and packing of TMS
equipment. The include from TMS checklist, PMR, calibration
check & troubleshooting.
Independently perform routine calibration and trouble shooting
maintenance procedure on TMS system.
12. R E S U M E
JETTLE FRANCIS
WEATHERFORDRBM-12-4
COURSES /TRAINING ATTENDED
Primary Logic Control with AB
Combined Sea Survival & Offshore Safety Procedure, HUET and Basic Fire Fighting and
Self Rescue
Health Safety and Environment-Management Systems Course By SSB/SSPC
XP-1 Jam System 6.22 at Weatherford Thailand
In house Jam Pro System Course in Weatherford.
In house Basic Hydraulics Course(Down Hold Tool)
In house training tubular handling and graph interpretations
Packers One Course in Weatherford
Packers Service Tools One
Onsite Stuck Pipe Prevention Training (Petronas Carigali and Priede International)
Becoming a Safety Leader Champion Course (Shell)
In house Finger Injury Prevention Course (Sedco Forex)
TECHNICAL SUMMARY
MS Dos, MS Office, MS PowerPoint, MS Outlook, Windows, Windows NT.
Personal attributes: I am a friendly, proactive, reliable and hard working individual who can
work under pressurized conditions and am capable working with and
through people at all levels. I am able to plan, develop, organize,
coordinating and supervise strategies and special projects. I have good
communication skills and personal dedication to producing timely, cost-
effective results.
Preferred work style: I prefer to work in a fairly organized dynamic environment and
challenge. I would like to think that I am an ambitious person, yet
realistic, about my chances of completing a task with success.
13. R E S U M E
JETTLE FRANCIS
WEATHERFORDRBM-13-4
References
!) Davie Finlayson
Weatherford Solutions sdn bhd
Regional operations Manager Liner Systems Asia Pacific
6012) 213-1543 / Davie.Finlayson@ap.weatherford.com
2) Markus Kaschke
ENVENTURE Limited
Operation Director
mobile:+971505508659
markus.kaschke@EnventureGT.com
3) ALIAS PARE
Supply Chain ManagementManager
PETRONAS CARIGALI BRUNEI LTD
+673-2253110 (Office -Brunei)
+673-8122303 (Mobile - Brunei)
+6019-2840516 (KL)
+673-2234068 (fax)
Alias_pare@petronas.com.my
